Civil and Environmental Engineering Commons^™

Effects Of Openings On The Analysis And Design Of Precast Prestressed Hollow Core Slabs, Eoghan Lodge

Theses

Precast prestressed hollow core floors are a widely used structural element which offers increased speed of construction, reduced self-weight and many other advantages. Due to the relatively low span-to-depth ratio and the speed of construction hollow core slabs are utilised in a large number of commercial buildings. In order to carry the services to the upper floors an opening must be made within the prestressed slab. Cutting an opening in a prestressed slab has significant effects on the structural behaviour of the slab and can considerably reduce the ultimate capacity of the slab.

This paper outlines the limited available guidance …

Reinforced Concrete Deterioration Of A 100 Year Old Structure In A Marine Environment, Ross O'Donovan

Theses

The current study investigates the deterioration of a 100 year old bridge located in a harsh marine environment. Constructed in 1908 - 1909 the Mizen Head Footbridge was one of the oldest reinforced concrete bridges in Ireland. The demolition of the bridge in 2009 provided a unique opportunity to examine its service life and to extract samples for analysis and investigation. A review of the construction of the bridge, and its maintenance history are presented, with a view to analysing their influence on the behaviour of the concrete.

Reinforcement corrosion due to chloride attack was identified. A focused study indicates …

Multi Geophysical Parameters For Earthquake Forecasting, Ramesh P. Singh

Mathematics, Physics, and Computer Science Faculty Articles and Research

This article focuses on the importance of keeping the public aware of earthquake forecasting. This article also encourages proper seismic codes to design buildings in the seismic-prone regions because such practice can save lives and property associated with an earthquake.

An Experimental Study On Bond Strength Of Reinforcing Steel In High-Volume Fly-Ash Concrete, Trevor J. Looney, Mahdi Arezoumandi, Jeffery S. Volz, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The production of Portland cement-the key ingredient in concrete-generates a significant amount of carbon dioxide. However, because of its incredible versatility, availability, and relatively low cost, concrete is the most consumed manmade material on the planet. One method of reducing concrete's contribution to greenhouse gas emissions is the use of fly ash to replace a significant amount of the cement. an experimental investigation was conducted to compare the bond strength of reinforcing steel in high-volume fly-ash concrete (HVFAC)-concrete with at least 50 % of the cement replaced with fly ash-with conventional concrete (CC). This study investigated two HVFAC mixes [with …

Dynamic Vulnerability Assessment Of Highway And Railway Bridges, Mehdi Mohseni

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Dynamic loads can cause severe damage to bridges, and lead to malfunction of transportation networks. A comprehensive understanding of the nature of the dynamic loads and the structural response of bridges can prevent undesired failures while keeping the cost-safety balance. Dissimilar to the static behavior, the dynamic response of bridges depends on several structural parameters such as material properties, damping and mode shapes. Furthermore, dynamic load characteristics can significantly change the structural response. In most cases, complexity and involvement of numerous parameters require the designer to investigate the bridge response via a massive numerical study.

This dissertation targets three main …

Investigation Of Out-Of-Plane Properties Of Interlocking Compressed Earth Block Walls, Nicholas Anthony Herskedal

Master's Theses

Interlocking compressed earth blocks (ICEBs) are cement stabilized soil blocks that allow for dry stacked construction. The incomplete understanding of the inelastic performance of ICEB building systems limits widespread acceptance of this structural system in earthquake prone areas. This thesis presents results from an experimental program designed to explore the behavior of ICEB walls, built according to current design practice in Indonesia and Thailand, and subjected to out-of-plane loading. A total of five reinforced and grouted ICEB walls were constructed and tested.

Results from experimentation show the current masonry design code, ACI 530, adequately predicts the yield strength of these …

Development Of Mems-Based Corrosion Sensor, Feng Pan

Graduate Theses and Dissertations

This research is to develop a MEMS-based corrosion sensor, which is used for monitoring uniform, galvanic corrosion occurring in infrastructures such as buildings, bridges. The corrosion sensor is made up of the composite of micro/nano metal particles with elastomers. The mechanism of corrosion sensor is based on the mass transport of corrosive species through the sensor matrix. When the metal particles in the matrix corrode, the electrical resistivity of the material increases due to increasing particle resistances or reduction of conducting pathways. The corrosion rate can be monitored by detecting the resistivity change in sensing elements. The life span of …

The Effect Of Mortar Strength On The Standard Test For Strand Bond, Cameron Murray

Civil Engineering Undergraduate Honors Theses

The prestressed industry is moving towards adopting the Standard Test for Strand Bond (STSB) to quantify the bond capacity of prestressing strand. In the test, strand is pulled through an 18 in. cylindrical casing filled with mortar. The force corresponding to the dead end displacement of 0.1 in. is recorded and this value is used to quantify strand bond. One of the concerns of the test is the requirement of a mean mortar strength of 4,500 to 5,000 psi during testing. There is concern that this 500 psi range may be too difficult to achieve. A study was conducted to …

Implementation And Validation Of Fault-Rupture Response Spectrum Analysis Procedure In Csibridge For Bridges Crossing Earthquake Fault Ruptures, Jennifer Evelyn Tures

Master's Theses

This thesis evaluates the application of a simplified analysis procedure as implemented in version 16 of CSiBridge^TM for design of bridges crossing earthquake fault ruptures. The fault-rupture response spectrum analysis (FR-RSA) approximation method has been proved adequate for both straight and curved ordinary bridges, but lacked a comfortable interface to accommodate the method users. Computers and Structure, Inc. has implemented the FR-RSA procedure into CSiBridge^TM, a user-friendly integrated 3-D bridge design software, as an added seismic design feature. By combining the response of the bridge due to the quasi-static displacement from the fault strike-slip rupture and the …

Seismic Performance Of Symmetric Steel Moment Frames With Random Reactive Weight Distributions, Conner F.F. Williamson

Master's Theses

When a structure undergoes seismic excitation, the intensities and spatial distributions of the reactive weights on the structure may not be the same as those assumed in original design. Such a difference is inevitable due to many facts with the random nature (e.g., redistribution of live load), resulting in accidental eccentricity and consequently torsional response in the system. The added torsion can cause excessive deformation and premature failure of the lateral force resisting system and its detrimental effect is typically accounted for in most building design codes with an arbitrarily specified accidental eccentricity value. While it tends to amplify drift …

Pullout Strength Of Epoxy Anchors Installed Underwater, Jeffrey Lee Blanchette

Master's Theses

This work presents the development of a test program and the results from the final round of testing to better understand the effect a submerged anchor installation has on the pullout strength of epoxy anchors. Two different epoxies were tested at embedment depths of two, four, and six bar diameters. These tests utilized three distinct installation procedures under dry and submerged conditions. The testing program occurred over five phases, with the final round used in analysis consisting of 24 anchor pullout tests. These tests showed that the presence of water did not have an effect on the epoxy bond when …

Physico-Chemical, And Sensory Properties Of Soy Based Gouda Cheese Analog Made From Different Concentration Of Fat, Sodium Citrate And Various Cheese Starter Cultures, Abu Amar, Ingrid Suryanti Surono

Makara Journal of Technology

Gouda cheese analog (GCA) was made using soy protein isolate (SPI), skim milk powder (SMP), fat (palm fat and butter fat), and water (W) at optimal ratio of SPI : SMP : F : W = 14 : 6 : 20 : 60. The effects of butter fat, sodium citrate, and cheese starter culture on the sensory properties of ripened product were assessed by preference test, hedonic test, and the texture profile analysis (TPA) of GCA. The free fatty acids, water-soluble nitrogen, and reduction in pH value of progel were also measured. The use of 100% butter fat (BF) produced …

Effects Of Deposition Parameters And Oxygen Addition On Properties Of Sputtered Indium Tin Oxide Films, Badrul Munir, Rachmat Adhi Wibowo, Kim Kyoo Ho

Makara Journal of Technology

Indium tin oxide (ITO) films were sputtered on corning glass substrate. Oxygen admixture and sputtering deposition parameters were optimized to obtain the highest transparency as well as lowest resistivity. Structural, electrical and optical properties of the films were then examined. Increasing deposition rate and film thickness changed the crystallographic orientation from (222) to (400) and (440), as well as higher surface roughness. It was necessary to apply substrate heating during reposition to get films with better crystallinity. The lowest resistivity of 5.36 x 10-4 Ω•cm was obtained at 750 nm film thickness. The films’ resistivity was increased by addition of …

The Effect Of Rubber Mixing Process On The Curing Characteristics Of Natural Rubber, Abu Hasan, Rochmadi Rochmadi, Hary Sulistyo, Suharto Honggokusumo

Makara Journal of Technology

This research is aimed at studying the relationship between rubber mixing processes and curing characteristics of natural rubber. The curing characteristic analysis was carried out through a natural rubber formula having been masticated and mixed, followed by curing. As many as four mastication methods were finely applied; each respected four sequences of rubber mixing process. In the first method, rubber was masticated for 5 minutes and then rubber chemicals and carbon black N 330 were simultaneously added. In the second and the third methods, rubber was masticated for 1 minute and then carbon blacks and rubber chemicals were also simultaneously …

Observation Of Center Disaster Damage On Pariaman And Wasior Using Differential Sar Interferometry (Dinsar), Dodi Sudiana, Mia Rizkinia

Makara Journal of Technology

This study focuses on disaster observations in Pariaman (West Sumatera) and Wasior (Papua) using remote sensing techniques (differential SAR interferometry). Differential interferometry (DInSAR) method was performed on two PALSAR data sets with different acquisition months, i.e. about a month after and before disaster, respectively. The center damage of Pariaman earthquake and Wasior flood can be determined by deriving Land Subsidence using DInSAR method.

Coastal Physical Vulnerability Of Surabaya And Its Surrounding Area To Sea Level Rise, Sayidah Sulma, Eko Kusratmoko, Ratna Saraswati

Makara Journal of Technology

The study for coastal vulnerability to sea level rise was carried out in Surabaya and its surrounding area, it has focused on calculations of the physical vulnerability index were used coastal vulnerability index (CVI) methods. It was standardized by the multi criteria analysis (MCA) approach according to the study area. The score of each physical variable derived from remote sensing satellite data and the results of studies that have been done, such as modeling results and thematic maps, and then integrated into geographic information systems (GIS). Result of this study shows that the coastal areas of Gresik, Surabaya, and Sidoarjo …

The Effect Of Size And Crumb Rubber Composition As A Filler With Compatibilizer Pp-G-Ma In Polypropylene Blends And Sir-20 Compound On Mechanical And Thermal Properties, Erna Frida

Makara Journal of Technology

Having been researched the development of thermoplastic elastomer material of polypropylene and natural rubber SIR- 20 compound with Crumb Rubber as the filler. Reinforced polypropylene with size 60 mesh with 1 mm, and the composition of the Crumb rubber (30, 40, and 50) wt%. Observed mechanical properties are tensile strength, fracture elongation, Young's modulus, tear strength and impact strength. Thermal properties are analyzed by DSC and DTA/TGA. It is acquired that for the size of 60 mesh crumb rubber tensile strength, fracture elongation, Young’s modulus, tear strength and impact strength are bigger than 1mm size. The addition of 60 mesh …

Development Of Local-Economic-Development Small And Medium Industries (Led-Sme) In East Java, Rachmad Hidayat, Sabarudin Akhmad

Makara Journal of Technology

This paper presents the effects of Indonesian government’s developmental efforts of assistance and training performed on the growth of LED-SME business units and business performance. Both parameters of the government’s assistance and training were used to analyze the impact to the growth and performance of business unit. To achieve a comprehensive result, samples acquired in this research were about 190 entrepreneurs and managers of LED-SME from East Java. Based on the parameters above, there are five hypotheses made to prove the relationship of the assistance and training to the growth and performance of business units. The structural equation modeling (SEM) …

Cdm Potential In Palm Solid Waste Cogeneration As An Alternative Energy In Aceh Province, Mahidin Mahidin, Izarul Machdar, Muhammad Faisal, Muhammad Nizar

Makara Journal of Technology

Empty Fruit Bunch (EFB) as a solid waste in Crude Palm Oil (CPO) industry does not utilized yet as an alternative energy source to generate electricity. It is well known that use of solid wate (biomass) as an energy source is part of the Clean Development Mechanism (CDM) scheme due to direct reduction of Green House Gases (GHGs) emission and provide a direct contribution to sustainable development. Utilization of EFB as a source of energy is very potential to be implemented in Aceh since this province has 25 CPO Mills at the moment which actively produce about 870,000 ton EFB …

Small Scale Experiment: Thermal Performance Comparison Between Fiber-Cement Roof And Photovoltaic Roof In Malang, Indonesia, Nurhamdoko Bonifacius, Sri Nastiti Nugrahani Ekasiwi

Makara Journal of Technology

Irradiation on the surface of photovoltaic module heats up the photovoltaic module itself and the room underneath the roof of integrated photovoltaic building in the tropics area. Room heating reduces thermal condition and photovoltaic module surface heating reduces its performance in generating electricity. This paper discusses an experiment of measuring the surface temperature of photovoltaic modules and fiber-cement roof surface as a comparison. This experiment also measures the impact of rising temperatures in each space underneath. It used small-scale mock-ups exposed to direct sunlight. The result of the experiment shows that photovoltaic roof surface temperature is lower than fiber-cement roof …

Improved Optical Probe For Measuring Phytoplankton Suspension Concentrations Based On Optical Fluoresensce And Absorption, Retno Wigajatri Purnamaningsih, Nining Betawati Prihantini

Makara Journal of Technology

This paper discusses the results of improved optical probe that works according to optical fluorescence and absorption phenomena for measuring the phytoplankton suspension concentrations. Measurements are made on the Scenedesmus sp. culture. The laboratory test has shown that range of concentration from 104 up to around 1 x 106 cells/mL; fluorescence intensity at λ = 685 nm; and logarithmic of transmission intensity at λ = 405 nm are proportional to the cell concentration linear with proportional constant γ = 4 × 10-5 and β = –2 × 10-7 mL/cell respectively.

Mechanical And Thermal Properties Of Polypropylene Reinforced By Calcined And Uncalcined Zeolite, Nurdin Bukit

Makara Journal of Technology

This study was carried out to compare mechanical and thermal properties of polypropylene (PP) reinforced with uncalcined and calcined zeolites. The PP samples were reinforced with zeolites at various quantities of 2, 4, and 6 (wt %). The comparison of the two types of zeolite was based on mechanical properties, including tensile strength, elongation at break, and Young’s modulus, and thermal characteristics analyzed using DSC, and DTA/TGA technique. The results obtained clearly revealed that both zeolites were able to significantly increase tensile strength and Young’s modulus of the samples, with calcined zeolite was found to work better. Addition of calcined …

Benchmark For Country-Level Earthquake Strong-Motion Instrumentation Program, Widjojo Adi Prakoso, I Nyoman Sukanta

Makara Journal of Technology

An empirical study to develop benchmark models at country-level to assess the suggested number of earthquake strongmotion stations based on a framework encompassing geographic, demographic, and socio-economic parameters is reported. The models are to provide a working estimate of the required number of stations for improving the strongmotion instrumentation program of Indonesia. National earthquake strong-motion networks of New Zealand, Japan, Taiwan, Iran, Turkey, and Italy were used as the references. The parameter proposed is the number of stations in land area of 1,000 km2, and three models based on the exponential regression analysis are presented as functions of population density, …

Worst Case Of Relative Disturbance Gain Array For Uncertain Distillation System, Rudy Agustriyanto, Jie Zhang

Makara Journal of Technology

This article discusses the constrained nonlinear optimization formulation for calculating the worst case of lower and upper bounds of relative disturbance gain array (RDGA) for uncertain process models. The proposed approach seeks the minimum and maximum values of the relative disturbance gains subject to the constraints in which the process and disturbance gains are within their uncertainty ranges. RDGA ranges are useful for control structure determination and the related robustness, as they provide information regarding the sensitivity to gain uncertainties. The proposed method is demonstrated by ternary distillation column case study. Closed loop simulation results support the analysis based on …

Biodiesel Production From Waste Cooking Oil Using Hydrodinamic Cavitation, Muhammad Dani Supardan, Satriana Satriana, Mahlinda Mahlinda

Makara Journal of Technology

The aim of this research was to study biodiesel production from low cost feedstock of waste cooking oil (WCO) using hydrodynamic cavitation apparatus. A two-step processes esterification process and transesterification process using hydrodynamic cavitation for the production of biodiesel from WCO is presented. The first step is acid-catalyzed esterification process for reducing free fatty acid (FFA) content of WCO and followed by base-catalyzed transesterification process for converting WCO to biodiesel as the second step. The result of esterification process with methanol to oil molar ratio of 5 and temperature of 60 oC showed that the initial acid value of WCO …

Knowledge Dictionary For Information Extraction On The Arabic Text Data, Wahyu Syaifullah Jauharis Saputra, Agus Zainal Arifin, Anny Yuniarti

Makara Journal of Technology

Information extraction is an early stage of a process of textual data analysis. Information extraction is required to get information from textual data that can be used for process analysis, such as classification and categorization. A textual data is strongly influenced by the language. Arabic is gaining a significant attention in many studies because Arabic language is very different from others, and in contrast to other languages, tools and research on the Arabic language is still lacking. The information extracted using the knowledge dictionary is a concept of expression. A knowledge dictionary is usually constructed manually by an expert and …

Specification For The Design, Testing, And Utilization Of Industrial Steel Storage Racks, Rack Manufacturers Institute

Rack Manufacturers Institute (RMI) Specifications and Manuals (1984 - 2012)

The standard applies to industrial pallet racks, movable shelf racks, and stacker racks made of cold-formed or hot-rolled steel structural members. It does not apply to other types of racks, such as drive-in or drive-through racks, cantilever racks, portable racks, etc. or to racks made of material other than steel.

An Experimental Study On Bond Strength Of Reinforcing Steel In Self-Consolidating Concrete, Trevor J. Looney, Mahdi Arezoumandi, Jeffery S. Volz, John J. Myers

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An experimental investigation was conducted to compare the bond strength of reinforcing steel in self-consolidating concrete (SCC) with conventional concrete (CC). This study investigated two different compressive strengths of SCC as well as CC. the experimental program consisted of 24 pull-out specimens as well as 12 full-scale beams (three for each concrete type and strength). the pull-out specimens were based on RILEM recommendations, and the beam specimens were tested under a simply supported four-point loading condition. the CC test results served as a control and were used to evaluate the results from the SCC pull-out and beam specimen tests. Furthermore, …

Probabilistic Analysis Of Indeterminate Highway Bridges Considering Material Nonlinearity, Liam Mccarthy

Masters

With ever-reducing maintenance budgets and ever-deteriorating bridge infrastructure, th assessment of existing bridges is vital. Reliability analysis techniques are becomin increasingly popular in the structural safety assessment of existing bridge structures Commonly, a component based approach is used in reliability analysis techniques Traditional reliability procedures often employ a conservative definition of failure, in that th component is deemed to have failed when the strength capacity has been exceeded at a singl cross section. As a result, the component's degree of redundancy and ductility is ignored giving an often conservative estimate of the load carrying capacity of the bridge component Therefore, …

Structural Performance And Economics Of High-Rise Buildings Under Seismic And Wind Loads, Nadeem Hussain

Theses

High-rise buildings have a priority when considering the potential consequences from natural hazards since they represent concentrated human and monetary assets. The use of high strength materials is promoted in this class of structures to effectively use floor areas, control vibrations and expedite construction. There is a pressing need to investigate the relationship between structural performance and economics of high-rise buildings with different material strengths under lateral loads, particularly seismic loads that control the design of a wide range of buildings.

To realistically represent the modern high-rise construction, five 60-story reinforced concrete (RC) buildings with varying material strengths, ranging from …