Civil and Environmental Engineering Commons^™

Study On Thermal Corrosion Resistance Of Asphalt Modified By Phase Change Materials, Li Ping, Wang Zhijian, Zheng Zhipeng, Yi Chengxi, Zhou Dexiang

Journal of China & Foreign Highway

In order to address the degradation issues faced by asphalt mixtures in airport runways and highway pavement,particularly focusing on thermal stability and thermal corrosion under high-temperature conditions,this paper investigated the impact of phase change materials (PCMs ) on the thermal corrosion resistance of asphalt.Three types of PCMs were utilized to jointly modify SBS-modified asphalt,and a series of tests were conducted to systematically analyze the performance of the modified asphalt,including thermogravimetric-differential scanning calorimetry (TG-DSC ) analysis,heat storage and release performance evaluation,laboratory thermal corrosion simulation of asphalt,three-index testing,and dynamic shear rheometer (DSR ) testing.The results indicate that PCMs can effectively regulate asphalt …

Construction And Application Of Knowledge Graph For Quality Management In Bridge Pile Engineering, Fang Xiaofeng, Dong Runhao, Gu Yanke, Pan Yanran

Journal of China & Foreign Highway

To enhance the efficiency of quality management in bridge pile foundation construction,this study constructed a knowledge graph applicable to the construction field of bridge pile foundation engineering to enable systematic representation and intelligent organization of knowledge.A methodology combining top-down design and bottom-up design was adopted to develop a framework for constructing a knowledge graph for the quality management of bridge pile foundation construction that encompasses both the schema layer and the data layer.The schema layer was established through ontology modeling,clarifying the concept categories,hierarchical structure,and their attribute relationships.The data layer employed a bidirectional long short-term memory (BiLSTM ) network integrated with …

Numerical Simulation Analysis On Support Performance Of Inclined-Vertical Combined Double-Row Interlocked Steel Pipe Piles, Zhou Yi, Zhang Ning, Wang Yanhua, Zhou Dequan

Journal of China & Foreign Highway

To select appropriate support structures in foundation pit engineering of underground tunnels for the Hong Kong International Airport (HKIA ),this paper proposed the use of inclined-vertical combined interlocked steel pipe piles,which are beneficial for support,water isolation,and recovery.Numerical simulations were conducted using finite element software Midas GTS NX to analyze the effect of different combination types and inclination angles on the engineering response of the inner-row piles of inclined-vertical combined double-row interlocked steel pipe piles.The results show that the inclined-vertical combined double-row piles reduce the horizontal displacement at the top of the inner-row piles by approximately 50% and decrease the peak …

Influence Mechanism Of Static And Dynamic Loading On Adsorbed Bound Water And Deformation In High Liquid Limit Soils, Fang Zhongwang, Zhou Shiji E, Xiao Yupeng, Peng Xin, Zhang Rui

Journal of China & Foreign Highway

In order to reveal the evolution law of adsorbed bound water and the deformation characteristics of high liquid limit soil under static and dynamic loading,Hainan high liquid limit soil and Hunan clayey sand were selected as comparative samples.Through consolidation,consolidation-creep,and dynamic triaxial tests,the deformation patterns of high liquid limit soil under different loading conditions were obtained.By combining nuclear magnetic resonance tests,the variation pattern of adsorbed bound water content in specimens before and after the consolidation and dynamic triaxial tests was studied.The results show that under static loading,the compression coefficient of high liquid limit soil meets the requirements of the Specifications for …

Study On Creep Mechanical Properties And Constitutive Models Of Silty Clay With Different Compaction Degrees, Li Mingchao, Wu Gangrong

Journal of China & Foreign Highway

In order to ensure the smooth construction and long-term stable operation of silty clay sections in the Zhoukou –Pingdingshan highway project,this paper conducted one-dimensional creep tests on silty clay samples with different compaction degrees under different stress levels and studied the effect law of compaction degree on its long-term creep mechanical properties.By establishing the corresponding creep constitutive models,a theoretical basis was provided for the prevention and control of creep failure in silty clay subgrades in engineering practice.Research results show that:① Under the same stress level,with the increase of compaction degree,the instantaneous strain,creep strain,and total strain of the samples all decrease …

Workability And Compressive Strength Of Steel Slag Powder-Cement-Based Self-Compacting Iron Tailings Mortar, Yang Zaiqing, Jin Shengji, Zhang Xiaogang, Sheng Guohua

Journal of China & Foreign Highway

Steel slag and iron tailings are typical industrial solid waste.Their large-scale stockpiling occupies a significant amount of land and has a negative impact on the environment.To respond to the Guiding Opinions on the Comprehensive Utilization of Bulk Solid Waste in the 14th Five Year Plan and expand the use of steel slag powder and iron tailings sand as concrete admixtures and aggregates,this study prepared steel slag powder-cement-based self-compacting iron tailings mortar.The workability index of mortar was determined through two tests:the flow expansion test and the V-shaped funnel test.Additionally,the compressive strength of the mortar was measured using a servo press.The results …

Mechanical Properties Of Transition Section Of Cable-Stayed Bridge With Kilometer-Scale Steel-Uhpc Composite Girders, Li Qiu, Zhi Haitao, Peng Yanqing, Peng Jianxin, Yuan Qin, Wu Xuewei

Journal of China & Foreign Highway

To study the mechanical properties of the steel-concrete composite section between steel box girders and steel-ultra-high performance concrete (UHPC ) composite girders,the Guanyinsi Yangtze River Bridge with a main span of 1 160 m was used as the background.Through refined finite element modeling,the stress characteristics under the most unfavorable load conditions and transmission mechanism of the steel-concrete composite section were analyzed,and the main factors affecting the stress of the composite section were discussed.The results indicate that under the most unfavorable load conditions,the stress of each component in the steel-concrete composite section is within 160.4 MPa,which is lower than the material …

Wind Tunnel Test Study On Wind-Resistant Performance Of Shuangliu Yangtze River Bridge, Li Xiukun, Wu Xuewei, Yang Can, Peng Xiaobin, Huang Zhiwen

Journal of China & Foreign Highway

The main bridge of Shuangliu Yangtze River Bridge on the Xingang Expressway in Wuhan City is a single-span suspension bridge with a main span of 1 430 m and a bridge tower of 272.75 m.The stiffening girder is in the form of a closed flat steel box girder with a width of 50.5 m.In order to study the wind-resistant performance of the bridge during operation,the performance of vortex-induced vibration of the girder was tested through wind tunnel tests of section model with two different geometric scales of 1∶60 and 1∶30,respectively.The sensitivity of the vortex-induced vibration response to the structural damping …

Application Of Forward-Ba Ck Ana Lysis And Difference Iteration Method For Solving Initial Cable Tension Of Arch Bridge, Xu Yufeng, Li Zihui, Zhang Zhantao

Journal of China & Foreign Highway

This article presented a method that c ombined the forward-back analysis method and the difference iteration method to solve the initial cable tension according to the state of a built bridge for an arch bridge.Given the known target state of the bridge,a reasonable set of initial cable tensions was determined as the initial value of iteration by the forward-back method.These initial tensions were then applied to the calculation model based on the actual construction process.Through the difference iteration method,the initial cable tensions were optimized.The results show that the method can effectively determine the final cable tension that meets engineering precision …

Experimental Study On Bending And Shear Performance Of Joint With Looped Reinforcement In Prefabricated Components, Liu Zhiquan, Hu Ke, Shi Xuefei, Zhong Yuzhuo

Journal of China & Foreign Highway

A joint with looped reinforcement is a type of steel bar connection structure with wet joints characterized by quick construction.In order to study the bending and shear stress performance and load-bearing capacity characteristics of the wet joints,four bearing capacity tests for bending and shear were designed and conducted for common application scenarios.The load,strain,and displacement changes of the specimens during the test process were tested,and the failure characteristics,load–displacement changes,and ultimate bearing capacity of this type of wet joint were analyzed.The results show that the wet joint with looped reinforcement has good ductility and conforms to the design principles of reinforced concrete.The …

Bending Moment Calculation And Reinforcement Recommendations For Cast-In-Place Cover Slabs In Slab Culverts, Li Yukun, Wan Kecheng, Fu Fulin

Journal of China & Foreign Highway

To address the complexity and lack of practical methods for calculating bending moments of cast-in-place cover slabs in slab culverts,the slabs were simplified as one-way slabs with a pair of opposing edges simply supported and the other pair of edges free.Theoretical formulas for calculating the bending moments within the slabs under uniformly distributed loads were derived using elastic theory.The accuracy of the theoretical formulas was validated through case studies via finite element software.Various combinations of length,width,and fill heights exist in highway projects,making the use of theoretical formulas for bending moment calculations cumbersome.Therefore,a simplified method for calculating maximum bending moments in …

Research On Whole-Hole Testing Technology For Under-Anchor Tension In Prestressed Concrete Girders, Zhu Jianzhao, Dong Hao, Gu Jungang, Feng Lu, Li Shuyang, Zhang Shoulong, Chen Chaung

Journal of China & Foreign Highway

This study aims to propose a new testing method,namely whole-hole back-pull testing technology,to reduce costs and increase efficiency in under-anchor tension testing,effectively addressing the engineering challenges of large testing volume and tight schedules.Based on the principle of the traditional back-pull method,the mechanism of whole-hole back-pull testing technology was explained through theoretical analysis and formula derivation.Technical optimization was carried out in conjunction with experimental research,and a complete application method was proposed.A feasibility analysis was carried out.The study obtained the simplified mechanical model and typical test curves of the whole-hole back-pull testing technology and proposed a formula and application method for determining …

Settlement Mechanism And Re Inforcement Measure For Large-Diameter And Small-Clearance Parallel P Ipe Jacking Undercrossing Complex Building, Tang Gang, Huang Wen Jie, Zhang Wenbo, Li Wenjie, Liang Bin

Journal of China & Foreign Highway

This study aims to study the settlem ent changes and distribution of various parts of a complex building during the construction of a large-diameter and small-clearance parallel pipe jacking undercrossing complex building.On the basis of the pipe jacking project of water quality guarantee engineering 2# for Tiegang –Shiyan Reservoir in Shenzhen,the settlement mechanism of pipe jacking undercrossing construction was analyzed.Through numerical simulation,the influence of the presence or absence of grouting reinforcement,and parameters such as longitudinal spacing and burial depth of pipe jacking on the variation trend and distribution law of building settlement was analyzed.The theoretically predicted values,numerical simulation values,and on-site …

Bridge Damage Detection And Bim Localization Methods Based On Image Recognition, Li Yu, Guo Hongjun

Journal of China & Foreign Highway

To overcome insufficient information of 2D detection data in traditional bridge maintenance,which hinders precise decision-making,this study proposed an automated method based on deep learning and structure from motion (SfM ) technology,which realized the complete process from image recognition to the accurate mapping of damage information in a building information model (BIM ).First,the YOLOv 8 deep learning model was used to automatically detect bridge surface damage.Second,the SfM technology was applied for the local 3D reconstruction of the damage area and to determine the 3D coordinates of the damage.Then,the least squares method was used to align the local coordinate system with the …

Bending Capacity And Strengthening Design With Bonding Steel Plates Of Concrete Sections In French Standards, Wu Zi

Journal of China & Foreign Highway

In the French general technical clauses widely used in Francophone African countries,only the calculation principles for the bending capacity of normal concrete sections are provided,with explicit formulas not listed,and the strengthening design of structures is not involved.According to the fundamental principles of concrete structures and French standard regulations,the calculation formulas for the bending capacity of normal concrete sections were derived.On the basis of the assumptions of strengthening design,calculation formulas for strengthening with bonding steel plates were derived.Through practical engineering calculations conducted on the VDN Expressway project in Senegal,the applicability and reliability of the proposed formulas were verified.This study can offer …

Quantitative Evaluation Of Tunnel Rock Mass Integrity Based On Mwd Technology, Zhang Kunmu, Peng Hao, Liang Ming, Han Yu, Song Guanxian

Journal of China & Foreign Highway

In tunnel construction,the quantitative evaluation of rock mass integrity heavily relies on information from the exposed face,and there are challenges when drilling data is used for integrity evaluation.To this end,this study introduced a novel method for quantitative evaluation of rock mass integrity during drilling,integrating numerical statistics with machine learning.A substantial dataset of digital drilling data was collected,covering three common types of rock mass integrity:relatively intact,relatively fractured,and fractured.Subsequently,a high-performance random forest model for the classification of rock mass integrity was developed through data preprocessing and hyperparameter optimization.The interpretability of the model ’s predictive results was enhanced using Shapley additive explanations (SHAP …

Object Detection And Tracking Based On Fusion Of Radar And Camera On Highway Side, Zeng Yongqiang, Zhang Yonghua, Zhao Hui, Liu Xin, Xu Mingsheng, Shen Jianwei, Hu Zhiwei, Chen Zhenquan

Journal of China & Foreign Highway

Camera is the most widely used sensor in intelligent transportation systems (ITS),but the decline of detection and positioning accuracy caused by target occlusion and external environment interference has always been an important factor restricting the development of ITS.In order to solve this problem,a multi-mode fusion target detection and tracking method based on millimeter-wave radar (MWR ) and camera on highway side was designed.Compared with cameras,high-resolution MWR had better measurement accuracy and weather robustness,serving as a better complement to camera perception.The proposed method used the center point-based radar and camera fusion algorithm for target detection and adopted the greedy algorithm for …

Morphological Test Of Areca Nut Fiber Ceramic Membrane Using Scanning Electron Microscopy Energy Dispersive X-Ray Mapping Spectroscopy, Amelia Marzain, Siti Umi Kalsum, Marhadi Marhadi, Ahmad Nabil Shahab

Journal of Materials Exploration and Findings

This study investigates the potential of ceramic membranes derived from areca nut fiber as a cost-effective and environmentally sustainable material for the removal of iron (Fe) and manganese (Mn) from groundwater. Two types of membranes were fabricated: one without activation and one chemically activated using 10% sodium hydroxide (NaOH). The morphological and elemental characteristics of both membranes were analyzed using Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray (EDX) mapping. The concentrations of Fe and Mn before and after treatment were measured using Atomic Absorption Spectroscopy (AAS). The NaOH-activated membrane exhibited a more porous surface structure and higher oxygen content, …

Quantifying Biocrust Evaporation In Arid Lands By Combining Thermal Imaging And Lysimeter Measurements, Rebekah C. Magness

UNLV Theses, Dissertations, Professional Papers, and Capstones

Biological soil crusts (biocrusts) are miniature ecosystems of living organisms incorporated within the soil matrix and established in the topmost millimeters of the soil surface. Biocrust plays a critical role in the hydrologic processes in arid lands, yet the extent to which it increases or decreases evaporation remains unclear. To gain a better understanding of the impact of biocrust on evaporation compared to bare soil, I studied a cyanobacteria-dominated biocrust patch surrounded by bare soil atop a lysimeter in the Mojave Desert near Las Vegas, Nevada. Using high-resolution thermal imaging, and the known latent heat flux from the lysimeter, I …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Jer-2021 Assistance To The State Water Resources Research Institute Program (Year 1 Of 5) For The 104(B) Program, David Tarboton

Funded Research Records

No abstract provided.

Wg-2413 Remote Sensing Of Wine-Grapevine Transpiration For Improving Vine Water Status, Alfonso Faustino Torres

Funded Research Records

No abstract provided.

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

A Comparative Analysis Of Complete Streets And Multimodal Transport Approaches: Implications For Sustainable Urban Mobility In Lincoln, And Global Contexts, Oliva Richard Kilyenyi

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Movement of people and goods in urban areas through different modes of transportation including walking, cycling, public transit and by autos is termed as urban mobility. Urban mobility presents significant environmental, social, and economic challenges for cities worldwide as they grapple with the impacts of conventional transportation systems, particularly in North America context where car-centric planning approaches has dominated urban developments since 1950s. Car-centric dominance is 80% in North American Metropolitan areas (Manaugh et al., 2015). The impacts of these conventional systems include greenhouse gas emission emissions contributing approximately 24% of global carbon dioxide (CO₂) emissions, air pollution …

Piezoelectric Energy Harvesting From Roadways: Challenges, Advances, And Future Directions, Heba Gaber, Mohamed Abdelraheem

Faculty Publications

As the global demand for renewable energy intensifies, piezoelectric energy harvesting from roadways has emerged as a promising avenue for sustainable power generation. This systematic literature review analyzes 61 peer-reviewed studies to assess the feasibility, performance, and potential of integrating piezoelectric systems into roadway infrastructure. While technology faces challenges, such as high installation costs, limited energy output, and a scarcity of thorough economic evaluations, findings suggest it holds considerable promise as a supplementary renewable energy source. The review analyzes the operational characteristics and efficiencies of various piezoelectric transducers, identifies key factors influencing system performance, and evaluates recent technological advances. It …

Rainfall-Runoff Modelling In An Indonesian Humid Tropical Area Using Satellite-Based Precipitation Products, Noordiah Helda

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This dissertation explores three rainfall-runoff models in the humid tropical regions of Indonesia using satellite-based precipitation products (SBPPs) and develops integrated machine-learning modeling frameworks. Several ground-based observations from BMKG (Badan Meteorologi, Klimatologi, dan Geofisika (also known as the Indonesian Agency for Meteorology, Climatology, and Geophysics)) stations across Indonesia (133−165 stations) are compared and evaluated against satellite products, indicating that GPM performs well, with R-squared values ranging from 0.54 to 0.76 and correlation coefficients ranging from 0.45 to 0.69, respectively.

In the Martapura Watershed, South Kalimantan, due to a lack of observational discharge data, streamflow was generated using the FJ Mock …

Large-Scale Experimental Study On The Impact Of Air Cleaning & Ventilation On Indoor Air Quality And Student Illness-Related Absenteeism, Daud Nosham

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This large-scale randomized experimental field study investigated the effect of portable air purifiers (PAPs) on classroom’s air quality and student’s illness related absenteeism. PAPs were installed in 317 classrooms from various school districts located in Eastern Nebraska. The classrooms were randomly assigned into four conditions: three treatment conditions (T1, T2 & T3) and one control condition (device without any filter). T1 was equipped with HEPA filters, T2 added Activated Carbon (AC) layer to HEPA, and T3 further integrated Germicidal Ultraviolet (GUV) alongside HEPA and AC filters. The measured variables were carbon dioxide (CO2), fine particles (PN2.5) and coarse particles (PNcoarse), …

Private Sand Mining In The Mississippi River: Sediment Budget And Morphology Implications Between Baton Rouge And Belle Chasse, Louisiana, Brett Mcmann

LSU New Orleans Theses and Dissertations

This analysis examined how private sand mining within the Mississippi River between Baton Rouge, LA and Belle Chasse, LA affected its sand budget from 2004-2012.

Records assembled indicated that private mining removed an annual average of 2.8 million cubic yards of sand. A HEC-RAS one-dimensional sediment transport model was utilized to assess this practice. Three scenarios were simulated: a baseline without mining, conditions reflecting documented mining rates, and a hypothetical case with excessive extraction.

Results suggest that private mining constituted approximately 26 percent of the total sand deficit between Baton Rouge and Belle Chasse. Mining appeared to cause localized changes …

Mbse For Process Analytical Technology- Bwon Analysis Case Study, Arnaldo Garcia Cervantes

Open Access Theses & Dissertations

Volatile Organic Compound (VOC) emissions from industrial sources, particularly Benzene, present significant environmental and public health challenges. Regulatory frameworks, such as the U.S. Environmental Protection Agency’s Benzene Waste Operations NESHAP (BWON), mandate strict monitoring of control devices, specifically carbon adsorption canisters, to prevent emission breakthrough. However, current industry practices rely heavily on manual Method 21 testing, a labor-intensive process that creates lagging indicators and increases the risk of non-compliance events. This thesis proposes the design and development of an on-line, automated fugitive emissions monitoring system tailored for carbon canisters using Model-Based Systems Engineering (MBSE). Utilizing the Object-Oriented System Engineering Method …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …