Civil and Environmental Engineering Commons^™

Modeling Of Asphalt Concrete For Cross-Anisotropic Visco-Elasticity And Heterogeneity, Zafrul Hakim Khan

Civil Engineering ETDs

Asphalt Concrete (AC) is a cross-anisotropic viscoelastic material. This study has developed a methodology to backcalculate the cross-anisotropic properties of the AC layer from the Falling Weight Deflectometer (FWD) sensor and pavement response data from embedded sensors inside a pavement section. This study has also developed a two-way coupled Multiscale Finite Element Model (MsFEM) with Phase Field Fracture (PFF) to study the microstructural heterogeneity and damage of the AC layer based on the actual field loadings. A Finite Difference Time Domain (FDTD) and Machine learning-based backcalculation algorithm were developed to determine the layer thickness and dielectric constant from air-coupled Ground …

Evaluation Of The Long-Term Performance Of Ogfc In South Carolina, Rishiraj Brahmbhatt

All Theses

Since the 1970s, South Carolina has employed open graded friction courses (OGFC) on high-speed asphalt roadways to enhance wet weather safety. While these mixes have indeed enhanced safety, they still grapple with durability issues, particularly concerning raveling. This research aimed to assess the prolonged performance of OGFC pavements in South Carolina, with a specific emphasis on isolated raveling occurrences. In 2012, the South Carolina Department of Transportation (SCDOT), constructed the first Warm Mix OGFC test section in South Carolina on I-20 Eastbound in Kershaw County, spanning 3.9 miles, using the Evotherm additive and excluding fibers. Following the success of this …

Structural Performance And Resiliency Of Reinforced Concrete Bridge Pier Columns, Multi-Column Piers, And Bridge Systems Subjected To Multiple Hazards – Fire, Collision, And Air Blast, Qusai Abdulkarim Alomari

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Given their close proximity to traffic and improper employment of protective systems, bridges and bridge piers are vulnerable to multi-hazard events triggered by vehicle collisions coupled with correlated and cascading events, such as explosions and fires. Despite recent catastrophic incidents that have highlighted the profound consequences of these extreme demands, including substantial damage, adverse economic impact, and loss of life, there has been a notable lack of research investigating the performance of bridges and bridge structural components under the aforementioned multi-hazards. Furthermore, current bridge design codes do not address these events assuming that, after these destructive events, replacement of the …

Engineered Biomass-Derived Carbon Adsorbents For Targeted Contaminant Remediation From Aqueous Environments, Suraj Venkat Pochampally

UNLV Theses, Dissertations, Professional Papers, and Capstones

Porous carbon adsorbents like biochar (BC) are produced from waste biomasses like wood chips, animal litter, nut shells, dried grass, etc. to be used in a multitude of applications like gas capture, soil amendment, water treatment, electrode materials, etc. In water treatment, carbon-based adsorbents have been mainly used to physically or chemically adsorb contaminants depending on the adsorption mechanism. However, BCs in their raw state do not have the capability of absorbing high amounts of contaminants and need to be activated/ modified for the pore network to broaden and adsorb the contaminants with better efficiency.

The scope of this dissertation …

Exploring The Potential Of Tesla Valve For Filtering And Sorting Microscale Active Swimmers: A Computational Study, Ariel Rogers, Zhiyao He, Yong Wang

Physics Faculty Publications and Presentations

It is well-known that a Tesla valve allows fluids to flow unidirectionally without moving parts; however, how Tesla valves interact with active matters and the potential applications of Tesla valves in biology remain largely unexplored. Here, we present a computational study on the potential use of Tesla valves for filtering and sorting microscale active swimmers such as bacteria. We investigated the behavior of microscale swimmers passing through the Tesla valve at different linear and angular velocities using numerical simulations and quantified the diodicity of the Tesla valve for active swimmers. Our results demonstrate that the Tesla valve can effectively filter …

Study On Performance And Dynamic Response Of Composite Stress Absorber Layer, Yang Sanqiang, Li Pengfei, Liu Lu, Cao Zilong

Journal of China & Foreign Highway

In order to compare the performance difference among the composite stress absorption layer, SBS stress absorption layer, and glass grille stress absorption layer, the dynamic response law of the composite stress absorption layer was explored. In this paper, based on the composite stress absorption layer composed of glass grille + rubber-modified asphalt gravel sealing layer, the UTM-25 test system was employed to carry out inter-layer shear, inter-layer tension, low temperature bending, and four-point fatigue test. By laying test sections and sensors, strain information of the stress absorption layer under different conditions was collected. It was found that the bonding force …

The Effects Of Engineering Summer Camps On Middle And High School Students’ Engineering Interest And Identity Formation: A Multi-Methods Study, Timothy Robinson, Adam Kirn, Jenny Amos, Indira Chatterjee

Journal of Pre-College Engineering Education Research (J-PEER)

This multi-methods study explores changes in engineering interest and identity of middle and high school students (n = 79) attending introductory-level engineering summer camps at a large western land grant university. Middle school is a critical time when student interest, identity, and subsequently career choice begin to emerge and hence it is important that at this age students are given accurate information about engineering majors in college and future career opportunities in engineering. Data were collected over a period of two years in six summer camps. Three separate populations of middle and high school students participated in the summer …

Durability Of Cfrp/Steel Bond In Natural Weather, Mastour Alsulami

USF Tampa Graduate Theses and Dissertations

Fiber reinforced polymers (FRP) are increasingly being used for infrastructurestrengthening and repair of steel structures. Though there have been several durability studies, exposures used are not representative of outdoor service conditions. Fewer studies have explored the effect of changing outdoor conditions typical in infrastructure use. The goal of the research is addressing this gap by evaluating the performance of commercially available CFRP systems under natural weather characteristic of hot, humid tropical conditions mainly and cold weather secondary in three different locations.

Thirty CFRP/steel joint specimens were prepared in laboratory conditions and exposed to ambient temperature on the Engineering building roofs …

Implementation Of Experimental Static Recrystallization Of High Strength Steel Into Computational Simulation Of Multi-Pass Slab Hot Rolling, S. K. Dasari, S. Ganguly, A. Abutunis, K. Chandrashekhara, M. F. Buchely, S. N. Lekakh, R. J. O'Malley, T. Natarajan

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Microstructural changes and softening due to static recrystallization have a critical influence on thermo-mechanical behavior of high strength steels during industrial multi-pass hot rolling. Numerical simulation using finite element analysis (FEA) can be used to accurately predict the softening behavior during the hot rolling process. Therefore, the implementation of an experimentally defined static recrystallization model into FEA is necessary to get realistic simulation prediction. in this study, the extent of softening during static recrystallization in Si and Mn alloyed high strength steel was measured using double hit tests. a Gleeble™ thermo-mechanical simulator was used to perform the double hit tests …

Effect Of Fire Flame On Some Mechanical Properties Of Self-Compacting Concrete, Haider Sadiq M. Ali, Nabeel A-M. Albayati, Basman R. Mohammed, Adil M. Jabbar

Al-Esraa University College Journal for Engineering Sciences

This paper presents an experimental investigation of the effect of fire flame on self-compacting concrete. The experimental program included casting cylinder and prism concrete specimens for compressive strength, modulus of elasticity, modulus of rupture, and concrete density tests. The specimens are exposed to fire flame at 800 ºC approximately for 2 hours or 6 hours. Then the specimens were cooled either in a fast or slow manner. Test results show that the compressive strength was reduced by about (54 - 61)% for fire exposure of 6 hours and by (27 - 37)% for 2 hours of exposure and cooled slowly …

Manual Preparation Of Eyeglasses Based On Corneal Topographical Images For Keratoconus Patients, Bassma Sabah Majeed, Faiz F. Mustafa, Nebras H. Ghaeb

Al-Esraa University College Journal for Engineering Sciences

keratoconus (KCN) is a non-inflammatory, progressive thinning process of the cornea. It is considered one of the advanced biomechanical changes on the corneal surface, and methods of treatment in late cases are special designed contact lenses or surgical intervention. The objective of this paper is to customize the standard eyeglass lens in a way so that it fits with the abnormal shape and changes of the surface of the cornea of a patient suffering from KCN disease.The proposed method here, based on manual scratching of the external surface of the standard eyeglass lens under supervising of an expert optometrist, where …

Age-Friendly Educational Buildings Primary Schools In Kerbala - A Case Study, Anwar Fadhil Hussein, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The concept of age-friendly societies has gained international attention among researchers, policy makers, and community organizations since the World Health Organization launched the Friendly Communities Project in 2006, to address challenges in some countries, as these challenges affect all aspects of society, and the educational environment represents an important joint of those joints, being the environment that is the most effective and influential in shaping human behavior. The age stage that is most affected and capable of learning and shaping behavior is of importance, which is the childhood stage. Therefore, the research focused on school buildings, as they represent an …

The Role Of Enhancing Interaction With The Natural Environment In Achieving Social Interaction For Children In Orphanage Institutions, Shamael M. W. Al Dabbagh, Zainab Khalid Rashad Al Khafaji

Al-Esraa University College Journal for Engineering Sciences

The child deprived of family care is considered the child most in need of attention and care. When the orphan child enters a new environment for him, it is obvious that he feels alienated, isolated, and loses the sense of interaction and communication with society. The research sees the possibility of mitigating this feeling by enhancing interaction with the natural environment within the internal spaces of the orphanage building and at the neighborhood level. In order to solve the research problem, the research adopted a hypothesis stating that "interaction with the natural environment enhances the achievement of social interaction for …

The Role Of Academic Competitions In Promoting Architectural Education: Tamayouze Excellence Award In Iraqi Architectural Education - Case Study, Nairy Mugardich Krikor, Anwar Subhi Ramadan

Al-Esraa University College Journal for Engineering Sciences

The importance of architectural competitions has emerged in finding the best designs, upgrading and architectural advancement in both practice and thinking. Architectural competitions have become intellectual meetings that contribute to stimulating self-learning and encouraging creativity. They act as an educational tool that leads to competition, giving motivation to the development of skills and learning, in a way that enhances the integration between architectural theory and practical practice for both engineers and architecture students. The research was concerned with studying the effective role of academic competitions in architectural education as one of the ways to improve teaching and learning, and to …

Analysis And Mitigation Of Cyber-Attacks Targeting Infrastructures Operated By Iot Systems, Raja Salih Mohammed Hasan, Nadia Mahmood Ali, Ihsan Jabbar Hasan

Al-Esraa University College Journal for Engineering Sciences

Numerous countries have a high impact on providing the planet with critical infrastructures offering very important services employed in different fields such as water resources management, public services, power grids, telecoms, commercials, and transportation. The increasing solutions in IoT systems made it possible to exploit internet connection services for supporting the critical infrastructures. The latest are being targeted by various types of cyber-attacks due to the advancement in internet services. Therefore, improving the security systems and the ways to detect the threats is highly required. Meanwhile, protecting the critical infrastructures from hostile cyber-attacks is of high significance. This article examines …

Reliability Assessment Model Of Network Operating System Based On Convolution Neural Network, Jamal N. Hasoon, Sarah S. Qasim, Mohammed A. Alshomali, Jane J. Stephan

Al-Esraa University College Journal for Engineering Sciences

The paper's subject is one of the points of fundamental significance in improving the development of complex computer systems is the effect of errors since their probability of occurrence in a widely distributed system is exceptionally high. Thus, the computer system must be dependable and provide comprehensive support for fault tolerance, fault detection, signal recovery mechanisms, failure prediction, etc. The goal is to develop a way to evaluate the reliability of the Red Hat Linux operating system utilizing data sets of system failures obtained from system injection with error reports using the Fault Injection Benchmarking and Reliability) FIBR( (for a …

Investing Traditional Architecture That Fulfills The Supreme Human Needs With Its Spiritual Dimension In Reconstruction / The Architecture Of Old Mosul City, A Case Study, Sinan Mohammad Talee Al-Saffar, Anwar Subhi Ramdan Al - Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

Architecture has sought since time immemorial to meet multiple human needs, starting from the basic physiological needs for human survival, psychological needs (social and individual) to needs related to human progress, such as taking into account the aesthetic and spiritual aspects, which represent the highest levels of those needs, through a set of design aspects and characteristics. This research is based on the study of the spiritual dimension of higher human needs in general that architecture seeks to meet, by studying that in the architecture of traditional cities, in particular, to enhance architectural knowledge with regard to the importance of …

The Role Of Algorithms In Formulating The Architectural Formation, Ghada Ghalib Abdul Wahab, Younis Mahmood M. Salem

Al-Esraa University College Journal for Engineering Sciences

Algorithms are mathematical processes that provide step-by-step instructions for solving a specific problem. They are commonly used in computer science and other technical fields to automate processes and solve complex problems. One great application of algorithms is the generation of shapes. Algorithms can be used to create complex shapes and patterns that are difficult or impossible to create manually. We will explore how algorithms can be used as a mechanism to generate shapes by adopting the Voronoi algorithm because it provides a wide environment for creativity through new intellectual processes that may not occur at all in the human mind …

The Detection Of Android Malwares Using The Features Selection Technique, Farah Rafid Salman, Amer Abdulmajeed Abdulrahman

Al-Esraa University College Journal for Engineering Sciences

The use of Android smartphones has been rising quickly as Internet-based services gain more popularity and develop. The Android operating system's enormous popularity has drawn malware attacks on these devices. It is difficult and ineffective to detect malware versions with features that modify their behavior in order to avoid detection by machine learning (ML) techniques. Effective feature selection plays a crucial role in detecting malware characteristics and reduces the dimensionality of a large dataset by removing unnecessary features that are not useful and keeping those relevant features that increase classification accuracy and detection rate. This helps to solve the problems …

A Review Of Polymer – Particles Composite Materials, Ismail Ibrahim Marhoon, Ayad Abbood Abdul Al-Hassan, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

In several engineering applications traditional materials are replacedby composite materials. Filled composite materials consist of the continuousmatrix and the filling particles. The primary purpose of introducing inorganicsolid particles into polymers is to essentially increase mechanical and physicalproperties. The wear properties of polymer composite can be changed to agreater degree by modifying the process of preparing the filled compositematerials. In the present review, a large-scale research has been conductedon the effect of wear on the composites of polymers. The effect of filler onthe polymer composites wear behavior has been thoroughly explained

Ability Of Replacing The Steel Strands By Cfrp In Pre-Stressed Concrete Girders: Art Review, Ahmed Salim Edan, Wael Shawky Abdulsahib

Al-Esraa University College Journal for Engineering Sciences

Fiber-reinforced polymer (FRP) composites are the modern,trustworthy alternatives to steel tendons and rebars. The bulk of currentresearch is devoted to establishing the feasibility of incorporating carbonfibre-reinforced polymer (CFRP) into reinforced concrete girders byevaluating the strength and reliability of CFRP and concrete components.In order to improve fatigue and corrosion resistance, CFRPs are crucial.Comparing reinforced prestressed concrete bridge girders strengthenedwith conventional steel reinforcement to those reinforced with CFRPs offersthe possibility of greatly increasing service life. Also widely researchedand used in bridge engineering as a corrosion-resistant substitute for steelreinforcement is CFRP composite material. The use of carbon fiber-reinforcedplastic (CFRP) reinforcement for prestressing concrete …

A Review Article On The Performance Based Seismic Design Of Structures, Reem Hatem Ahmed, Sahar Elaiwi, Shelan Hameed Ameen

Al-Esraa University College Journal for Engineering Sciences

For the most part, seismic design builds complex structural systems using the same small number of essential structural components as non-seismic design projects. Based on the building regulations, structures are frequently designed to "withstand" the largest earthquake with a given likelihood that is projected to happen at their location. This means that by avoiding structures from collapsing, the number of fatalities must be maintained to a minimal. Seismic design involves knowing the many failure modes regarding a structure and giving it the right stiffness, strength, ductility, and layout for ensuring that these modes do not take place. In this essay, …

Mechanism Underlying Effect Of Expansive Agent And Shrinkage Reducing Admixture On Mechanical Properties And Fiber-Matrix Bonding Of Fiber-Reinforced Mortar, Kamran Aghaee, Taihao Han, Aditya Kumar, Kamal Khayat

Materials Science and Engineering Faculty Research & Creative Works

Expansive agent (EA) and shrinkage reducing admixture (SRA) are utilized to reduce shrinkage and risk of cracking in concrete. EA compensates shrinkage by initial expansion, and SRA reduces surface tension in the pore fluid. Although EA and SRA effectively reduce shrinkage, they can impair micro-structure of concrete at high contents. The shrinkage reduction effect of EA and SRA is well known; however, there is limited knowledge about their negative effect on microstructure and fiber matrix interfacial transition zone (ITZ). The current study explores the effect of using 10 % CaO-based EA, 2 % SRA, and their combination on mechanical, shrinkage, …

Feasibility Study Of Pavement Rutting Evaluation Method Based On Driving Vibration, Zhang Jinxi, Wang Peirong, Cao Dandan, Ceng Jingxiang

Journal of China & Foreign Highway

To explore the intelligent detection and monitoring methods of pavement performance, this paper utilized the self-developed driving data collection app to collect vibration acceleration and other data of the pavement during driving, and carried out the feasibility study of evaluating the pavement rutting by driving vibration. Firstly, the collected vibration acceleration data was processed for noise reduction, and the driving vibration characteristics in different working conditions were analyzed. Secondly, seven time domain indicators with high correlation between vibration acceleration and the rutting were extracted as the initial set of indicators, and the seven indicators were downscaled into two independent principal …

Influence Of Shear Deformation On Manufacturing And Erection Alignment, Wang Jin, Chen Changsong

Journal of China & Foreign Highway

This paper aims to study the effect of shear deformation on the manufacturing and erection alignment of main girders of free cantilever erection steel box girder bridges and better design the state of bridge formation state. To this end, it calculated the shear stress coefficient of uniformity of the steel box girder’s cross-section by adopting the finite element method and conducted comparison with the solid model of the plate and shell units of the steel box girder. The results show that the shear stress coefficient of uniformity calculated by finite element software is accurate and reliable. Additionally, simple modeling indicates …

Study On Temperature Gradient Of Long-Span Single-Box Double-Chamber Box Girder Bridge, Yang Wenbin

Journal of China & Foreign Highway

In view of the complex temperature effect of the single-box double-chamber box girders, this paper aimed to carry out the temperature gradient study of box girder cross-sections by employing a short-tower single-box double-chamber cable-stayed bridge with span arrangement of (120+120) m. 21 temperature sensors were installed at the cross-sections of large-mileage closure sections, with the set collection frequency of one time per hour and a wireless collection module for data collection. Meanwhile, temperature observation was carried out for a period of 171 d to obtain the distribution law of the temperature gradient in cross-sections of the closure sections. The study …

Experimental Study On The Influence Of Cantilevered Sidewalk On The Wind Resistance Of A Cable-Stayed Bridge With Pk Girder, Yu Zhenghua

Journal of China & Foreign Highway

Bilateral box steel main girders are widely employed in large-span double-plane cable-stayed bridges. These bridges are characterized by low frequency, small damping, and relatively light mass, and their wind resistance stability is a key problem to be solved in bridge construction. By taking the Pingnan super major cable-stayed bridge with a main span of 636 m on Pingrong Expressway under construction as the research project, this paper built a finite element spatial model of the bridge and analyzed the structural modal characteristics. Meanwhile, it carried out the main girder segmental model of elastically suspended vortex vibration and chatter vibration wind …

Orthogonal Analysis Of Influential Factors In Construction Of Portal Pier Foundations Adjacent To Existing Railway, Li Minghua, Feng Jiahui, Han Wenjing

Journal of China & Foreign Highway

To study the influencing factors of portal pier foundation construction adjacent to existing railway, this paper adopted the orthogonal test method based on numerical simulation to study the influence of five factors on the existing railway, including the length of bored piles, construction sequence of bored piles, excavation depth of foundation pits of the bearing platform, length of steel sheet piles, and number of steel sheet piles. The results show that during the bored pile construction stage, the most important factor is the construction sequence of bored piles. Meanwhile, during the stage of foundation pit excavation and substructure construction, the …

Optimization Design Of Highway Tunnel Inner Contour Based On Simu Lated Annealing Algorithm, Zhang Qingwei

Journal of China & Foreign Highway

To optimize the inner contour design of road tunnels, this paper regarded the inner contour design of a road tunnel as an optimization problem in certain conditions. By taking the area optimization as the objective, it introduced the simulated annealing algorithm to solve the problem based on the calculation model building of the inner contour of a single-centered circle with an inverted arch, with a program written for verification and analysis. The results show that the optimization design scheme is feasible and can provide an idea way for the inner contour design of road tunnels.

Comparison Of Specifications For Highway Safety Audi Ts Of China ， The United States ， And Australia, Li Jie, Han Huanhuan, Li Jia, Ren Yabo, Gong Ruiming

Journal of China & Foreign Highway

Traffic safety is one of the three major problems of transportation. To build a transportation power, China has proposed the call of “facilitating the transportation development from pursuing the speed and scale to paying more attention to quality and safety”, and improving the audit specifications of road safety is an important basis for increasing the transportation safety level. This paper firstly introduced the background where China, the United States and Australia issued the audit specifications of road safety, and then compared the differences between the three countries in the aspects of the audit process for road safety, audit indexes and …