Civil and Environmental Engineering Commons^™

Development Of High Performance Precast/Prestressed Bridge Girders, Amin K. Akhnoukh

Department of Construction Engineering and Management: Dissertations, Theses, and Student Research

Demand continues to increase for bridges with long spans and shallow depths. Due to safety concerns, four-span overpasses are being replaced with two span overpasses to avoid placement of piers near the highway shoulders. In the meantime, the bridge profile is restricted due to existing businesses nearby. Thus, nearly the same superstructure depth must be used for double the span length. This dissertation focuses on topics aiming at providing precast prestressed concrete girders with the shallowest possible depth for a given span. It forms parts of larger projects conducted by the University of Nebraska for the Nebraska Department of Roads …

Bs News

Building Services Engineering

No abstract provided.

Green Roofs For A Green Town: Possibilities Of Green Roof Implementation In The Town Of Normal, Lindsey Sihau, '09

Outstanding Senior Seminar Papers

Green roofs have been growing in popularity throughout the world. Scientists have been studying them since the 1980’s. This research project reviews the literature regarding both the benefits and barriers to green roof construction and management. Policies around the nation are then examined and analyzed. Suggestions are made regarding possible additions to the local Stormwater Management Policy that would emphasize the importance of sustainable building techniques such as green roofs, and hopefully offer incentive to their implementation.

Bs News

Building Services Engineering

No abstract provided.

Site Response Zones And Short-Period Earthquake Ground Motion Projections For The Las Vegas Basin, Barbara Luke, Ying Liu

Civil and Environmental Engineering and Construction Faculty Research

A deterministic seismic hazard analysis was conducted to address the effect of local soil conditions on earthquake-induced strong ground motion in the Las Vegas Basin, Nevada (US). Using a large geological and geotechnical database, two response units were defined: a fine-grained unit, predominantly clay; and a coarse-grained unit, predominantly gravel. A moderate number of high-quality shallow shear wave velocity measurements were collected from which characteristic shear wave velocity profiles were developed for each response unit. An equivalent-linear one-dimensional site response model was used. The model was calibrated using a basin-wide, small-strain ground motion database. Calibration tests showed that ground motion …

Bs News

Building Services Engineering

No abstract provided.

Barriers To Innovation In Public-Private Partnership (Ppp), Louis Gunnigan, David Eaton

Conference papers

This paper sets out to identify barriers to greater use of innovation in PPP projects. Using a series of in-depth interviews with participants on two closely related PPP projects, data were gathered and analysed to compare the success of the projects in relation to innovation. The views of the participants relating to the approach to innovation were recorded and were examined relative to the views on innovation expressed in published documentation relating to these projects. The research showed that two different types of innovation could be identified – namely cost reducing innovation and product enhancing innovation. It also showed that, …

Bs News

Building Services Engineering

No abstract provided.

Development Of A Problem-Based Learning (Pbl) And Cooperative Learning (Cl) Transportation Engineering Course For Undergraduate Students, Deogratias Eustace

Civil and Environmental Engineering and Engineering Mechanics Faculty Publications

This study reports the findings of a project that was done during the implementation of a problem-based learning (PBL) and cooperative learning (CL) elements into an undergraduate transportation engineering course. The study procedure used the student course evaluations, including a survey questionnaire, and university-wide standardized student evaluations. Additionally, student homework, tests, and exam grades were used as part of the evaluation process. Two methods of teaching formats were evaluated: the traditional teaching method of lecturing and using end-of-chapter book questions for homework assignments and the new currently used teaching method of student field data collection, preparation of a lab report …

Bs News

Building Services Engineering

No abstract provided.

Development Of A Particle Flow Test For Rotational Molding, Russell B. Whatcott

Theses and Dissertations

One of the current testing method (the Dry Flow test) to qualify resin for use in production in the rotomolding process has been shown to have many flaws in both equipment and procedure. Research was done here to investigate a possible alternative that could eliminate some of these testing deficiencies. By reducing equipment and operator errors, the testing of materials becomes more valuable of an exercise. The Angular Flow test developed in this research can increase repeatability. By coming to understand the rotational molding process better, an evaluation that can give more valid information was devised.

The Study Of Superintendent Training And Its Effects On Homebuilding Cycle Time, John Wesley Burk

Theses and Dissertations

This study was conducted to determine how much time would be saved in the homebuilding cycle when field superintendents received training. The study took place during the 2007 calendar year with a production homebuilder in southern Nevada. New technologies and techniques were introduced during weekly training meetings that were held at both the corporate office and construction job sites. A scheduling tool was introduced along with new procedures and policies. The superintendents were required to report daily on the tasks that had been completed. This gave the superintendent and upper management the ability to follow the home throughout the building …

Development And Characterization Of Friction Bit Joining: A New Solid State Spot Joining Technology Applied To Dissimilar Al/Steel Joints, Brandon Raymond Siemssen

Theses and Dissertations

Friction bit joining (FBJ) is a new solid-state spot joining technology developed in cooperation between Brigham Young University of Provo Utah, and MegaStir Technologies of West Bountiful Utah. Although capable of joining several different material combinations, this research focuses on the application of FBJ to joining 5754 aluminum to DP 980 steel, two alloys commonly used in automotive applications. The thicknesses of the materials used were 0.070 inches (1.78 mm) and 0.065 inches (1.65 mm), respectively. The FBJ process employs a consumable 4140 steel bit and is carried out on a purpose built research machine. In the first stage of …

A Comparative Study Of Seismic Response Of R.C Low-To-Medium Rise Buildings Under The Egyptian Code Of Loads (Ecdl 2003), Mohamed Ahmed Mohamed Diab

Archived Theses and Dissertations

No abstract provided.

Investigating A Natural Organic Binder As A Bitumen Substitute In Flexible Pavements, Karim Ahmed Abdel Warith

Archived Theses and Dissertations

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

A Study Of Craft Worker Length Of Employment At Select Missouri Construction Companies, Richard D. Bruce

All-Inclusive List of Electronic Theses and Dissertations

Craft worker retention is a constant concern of construction firms who selfperform portions of projects. These companies must maintain an understanding oftheir work force. A methodology is presented in this study for studying information in readily available employee databases to gain such an understanding. Using a sample of 10 of Missouri's 17 largest contractors, that employ 5,277 craft workers; this study examined the employee databases to identify differences in mean length of employment based on hire age, craft, union affiliation, and company size. The analysis of variance statistical technique was utilized to test four null hypotheses. Based on the test …

Bs News

Building Services Engineering

No abstract provided.

Incorporation Of Space Syntax Theory In Determining Safe And Efficient Construction Site Layout, Minsuck Cho

Masters Theses

Facility layout is an important to determine a proper arrangement of temporary facilities in a construction site. It significantly impacts productivity and safety of construction. The objectives of layout planning are to minimize travel distance and time, to decrease the facility transportation and setup costs, and to improve site safety. Despite the importance of facility layout, it is often overlooked in the planning phase. Several models have been developed taking some of these factors into consideration; however, construction managers and site planners often regard cost as the most important factor in layout planning and pay less attention to safety and …

Bs News

Building Services Engineering

No abstract provided.

Selecting The Best Thermal Building Insulation Using A Multi-Attribute Decision Model, Theodore J. Sotoropolis

Theses and Dissertations

Thermal building insulation has traditionally been viewed as a means to reduce thermal conductivity through the building envelope. Builders typically choose the least expensive material which meets the specifications in order to remain competitive. Other factors regarding long term health and environmental consequences are typically dismissed. However, a recent shift toward sustainability requires that architects and engineers take a more responsible approach to building design. This research takes a holistic approach to selecting thermal building insulation through the use of a multi-attribute decision model. Several types of insulating products from a variety of manufacturers were investigated in order to determine …

An Analysis Of Construction Cost And Schedule Performance, Michael J. Beach

Theses and Dissertations

Cost and schedule performance are widely accepted in the literature and in industry as effective measures of the success of the project management effort expended. Earned Value Analysis (EVA) offers many metrics to objectively measure cost and schedule performance of many different types of projects. The author utilized EVA to objectively measure the cost and schedule performance of completed United States Air Force (AF) Military Construction (MILCON projects from 1990 to 2005. The impact of Major Command (MAJCOM), Construction Agent (CA), and facility type (CATCODE) and the combination of these variables on the EVA metrics of Cost Performance Index (CPI), …

Resistance To It Change In The Aec Industry: An Individual Assessment Tool, Kirsten Davis, Anthony D. Songer

Construction Management Faculty Publications and Presentations

Numerous IT adoption studies within the AEC industry identify issues with individuals resisting IT changes. Current change models often only look at organizations and tasks and frequently neglect the individuals involved. The limitations in existing change models and the criticality of people issues in the successful implementation of change necessitates the investigation of individual resistance to IT change.

Change management theory and attitude-behavior connections provide a framework to study variables associated with impeding/promoting the use of technologies. Data collected from a 50-person sample of the AEC population allowed reductions of the attitudes, fears, and beliefs variables. Reducing the variables indicative …

Bs News

Building Services Engineering

No abstract provided.

Parameters Influencing The Performance Of Reinforced Concrete-Fiber Reinforced Polymer Systems, Yosra Hesham Mohamed El Maghraby

Archived Theses and Dissertations

No abstract provided.

Changing Training Needs Arising From The Introduction Of Off-Site Construction Techniques, Louis Gunnigan, John Mcdonagh

Conference papers

The objective of this paper is to examine the changes in training needs arising from the increase of off-site construction in the Republic of Ireland. The methodology employed was a case study using a participant observation research technique. For a period of three weeks, the researcher observed the construction of residential housing, constructed using off-site techniques. From the practices observed and from interviews with the operatives on-site, an account of the differences in skills required between those employed in traditional construction and off-site construction was compiled. Each of the different trades involved in traditional construction was addressed and a comprehensive …

A Multi-Criteria Workforce Planning System For Contracting Companies, Yasmine Mamdouh Mohamed Abou Samra

Archived Theses and Dissertations

No abstract provided.

Value Engineering In Bridge Deck Construction During The Conceptual Design Stage, Yasmine Ahmed Sherif Ali Essawy

Archived Theses and Dissertations

No abstract provided.

Bs News

Building Services Engineering

No abstract provided.

Development Of Calcium Sulfate – Ggbs – Portland Cement Binders, Brian O'Rourke, Ciaran Mcnally, Mark G. Richardson

Publications

Binders manufactured using a blend of gypsum, ground granulated blast furnace slag and Portland cements are technically viable and possess considerable environmental and economic advantages when compared to binders manufactured using Portland cement alone. As such, the evaluation of binders made from these materials offers a promising research focus in the quest to produce technically sound, environmental and economical binders for specialist uses as an alternative to traditional concrete binders of higher carbon footprint. The aim of the test programme was to investigate the viability of a series of binders designed to fulfil particular user needs while having significantly decreased …