Civil and Environmental Engineering Commons^™

Mechanical Properties Of Transition Section Of Cable-Stayed Bridge With Kilometer-Scale Steel-Uhpc Composite Girders, Li Qiu, Zhi Haitao, Peng Yanqing, Peng Jianxin, Yuan Qin, Wu Xuewei

Journal of China & Foreign Highway

To study the mechanical properties of the steel-concrete composite section between steel box girders and steel-ultra-high performance concrete (UHPC ) composite girders,the Guanyinsi Yangtze River Bridge with a main span of 1 160 m was used as the background.Through refined finite element modeling,the stress characteristics under the most unfavorable load conditions and transmission mechanism of the steel-concrete composite section were analyzed,and the main factors affecting the stress of the composite section were discussed.The results indicate that under the most unfavorable load conditions,the stress of each component in the steel-concrete composite section is within 160.4 MPa,which is lower than the material …

Wind Tunnel Test Study On Wind-Resistant Performance Of Shuangliu Yangtze River Bridge, Li Xiukun, Wu Xuewei, Yang Can, Peng Xiaobin, Huang Zhiwen

Journal of China & Foreign Highway

The main bridge of Shuangliu Yangtze River Bridge on the Xingang Expressway in Wuhan City is a single-span suspension bridge with a main span of 1 430 m and a bridge tower of 272.75 m.The stiffening girder is in the form of a closed flat steel box girder with a width of 50.5 m.In order to study the wind-resistant performance of the bridge during operation,the performance of vortex-induced vibration of the girder was tested through wind tunnel tests of section model with two different geometric scales of 1∶60 and 1∶30,respectively.The sensitivity of the vortex-induced vibration response to the structural damping …

Application Of Forward-Ba Ck Ana Lysis And Difference Iteration Method For Solving Initial Cable Tension Of Arch Bridge, Xu Yufeng, Li Zihui, Zhang Zhantao

Journal of China & Foreign Highway

This article presented a method that c ombined the forward-back analysis method and the difference iteration method to solve the initial cable tension according to the state of a built bridge for an arch bridge.Given the known target state of the bridge,a reasonable set of initial cable tensions was determined as the initial value of iteration by the forward-back method.These initial tensions were then applied to the calculation model based on the actual construction process.Through the difference iteration method,the initial cable tensions were optimized.The results show that the method can effectively determine the final cable tension that meets engineering precision …

Experimental Study On Bending And Shear Performance Of Joint With Looped Reinforcement In Prefabricated Components, Liu Zhiquan, Hu Ke, Shi Xuefei, Zhong Yuzhuo

Journal of China & Foreign Highway

A joint with looped reinforcement is a type of steel bar connection structure with wet joints characterized by quick construction.In order to study the bending and shear stress performance and load-bearing capacity characteristics of the wet joints,four bearing capacity tests for bending and shear were designed and conducted for common application scenarios.The load,strain,and displacement changes of the specimens during the test process were tested,and the failure characteristics,load–displacement changes,and ultimate bearing capacity of this type of wet joint were analyzed.The results show that the wet joint with looped reinforcement has good ductility and conforms to the design principles of reinforced concrete.The …

Bending Moment Calculation And Reinforcement Recommendations For Cast-In-Place Cover Slabs In Slab Culverts, Li Yukun, Wan Kecheng, Fu Fulin

Journal of China & Foreign Highway

To address the complexity and lack of practical methods for calculating bending moments of cast-in-place cover slabs in slab culverts,the slabs were simplified as one-way slabs with a pair of opposing edges simply supported and the other pair of edges free.Theoretical formulas for calculating the bending moments within the slabs under uniformly distributed loads were derived using elastic theory.The accuracy of the theoretical formulas was validated through case studies via finite element software.Various combinations of length,width,and fill heights exist in highway projects,making the use of theoretical formulas for bending moment calculations cumbersome.Therefore,a simplified method for calculating maximum bending moments in …

Research On Whole-Hole Testing Technology For Under-Anchor Tension In Prestressed Concrete Girders, Zhu Jianzhao, Dong Hao, Gu Jungang, Feng Lu, Li Shuyang, Zhang Shoulong, Chen Chaung

Journal of China & Foreign Highway

This study aims to propose a new testing method,namely whole-hole back-pull testing technology,to reduce costs and increase efficiency in under-anchor tension testing,effectively addressing the engineering challenges of large testing volume and tight schedules.Based on the principle of the traditional back-pull method,the mechanism of whole-hole back-pull testing technology was explained through theoretical analysis and formula derivation.Technical optimization was carried out in conjunction with experimental research,and a complete application method was proposed.A feasibility analysis was carried out.The study obtained the simplified mechanical model and typical test curves of the whole-hole back-pull testing technology and proposed a formula and application method for determining …

Settlement Mechanism And Re Inforcement Measure For Large-Diameter And Small-Clearance Parallel P Ipe Jacking Undercrossing Complex Building, Tang Gang, Huang Wen Jie, Zhang Wenbo, Li Wenjie, Liang Bin

Journal of China & Foreign Highway

This study aims to study the settlem ent changes and distribution of various parts of a complex building during the construction of a large-diameter and small-clearance parallel pipe jacking undercrossing complex building.On the basis of the pipe jacking project of water quality guarantee engineering 2# for Tiegang –Shiyan Reservoir in Shenzhen,the settlement mechanism of pipe jacking undercrossing construction was analyzed.Through numerical simulation,the influence of the presence or absence of grouting reinforcement,and parameters such as longitudinal spacing and burial depth of pipe jacking on the variation trend and distribution law of building settlement was analyzed.The theoretically predicted values,numerical simulation values,and on-site …

Bridge Damage Detection And Bim Localization Methods Based On Image Recognition, Li Yu, Guo Hongjun

Journal of China & Foreign Highway

To overcome insufficient information of 2D detection data in traditional bridge maintenance,which hinders precise decision-making,this study proposed an automated method based on deep learning and structure from motion (SfM ) technology,which realized the complete process from image recognition to the accurate mapping of damage information in a building information model (BIM ).First,the YOLOv 8 deep learning model was used to automatically detect bridge surface damage.Second,the SfM technology was applied for the local 3D reconstruction of the damage area and to determine the 3D coordinates of the damage.Then,the least squares method was used to align the local coordinate system with the …

Bending Capacity And Strengthening Design With Bonding Steel Plates Of Concrete Sections In French Standards, Wu Zi

Journal of China & Foreign Highway

In the French general technical clauses widely used in Francophone African countries,only the calculation principles for the bending capacity of normal concrete sections are provided,with explicit formulas not listed,and the strengthening design of structures is not involved.According to the fundamental principles of concrete structures and French standard regulations,the calculation formulas for the bending capacity of normal concrete sections were derived.On the basis of the assumptions of strengthening design,calculation formulas for strengthening with bonding steel plates were derived.Through practical engineering calculations conducted on the VDN Expressway project in Senegal,the applicability and reliability of the proposed formulas were verified.This study can offer …

Quantitative Evaluation Of Tunnel Rock Mass Integrity Based On Mwd Technology, Zhang Kunmu, Peng Hao, Liang Ming, Han Yu, Song Guanxian

Journal of China & Foreign Highway

In tunnel construction,the quantitative evaluation of rock mass integrity heavily relies on information from the exposed face,and there are challenges when drilling data is used for integrity evaluation.To this end,this study introduced a novel method for quantitative evaluation of rock mass integrity during drilling,integrating numerical statistics with machine learning.A substantial dataset of digital drilling data was collected,covering three common types of rock mass integrity:relatively intact,relatively fractured,and fractured.Subsequently,a high-performance random forest model for the classification of rock mass integrity was developed through data preprocessing and hyperparameter optimization.The interpretability of the model ’s predictive results was enhanced using Shapley additive explanations (SHAP …

Object Detection And Tracking Based On Fusion Of Radar And Camera On Highway Side, Zeng Yongqiang, Zhang Yonghua, Zhao Hui, Liu Xin, Xu Mingsheng, Shen Jianwei, Hu Zhiwei, Chen Zhenquan

Journal of China & Foreign Highway

Camera is the most widely used sensor in intelligent transportation systems (ITS),but the decline of detection and positioning accuracy caused by target occlusion and external environment interference has always been an important factor restricting the development of ITS.In order to solve this problem,a multi-mode fusion target detection and tracking method based on millimeter-wave radar (MWR ) and camera on highway side was designed.Compared with cameras,high-resolution MWR had better measurement accuracy and weather robustness,serving as a better complement to camera perception.The proposed method used the center point-based radar and camera fusion algorithm for target detection and adopted the greedy algorithm for …

Evaluating The Impact Of Precast Vs. Cast-In-Place Concrete: A Life Cycle Assessment Of A Parking Garage In Nashville, Robert Trey Owen

Student Scholar Symposium

Concrete is one of the most widely used building materials in the construction industry, generating $64 billion in revenue, according to the Concrete Financial Insights Index. Given the material’s extensive use, construction professionals seek ways to optimize construction project budgets and schedules. Precast concrete, which is manufactured offsite and then transported to the project when needed, is a potential solution for these goals. This research aims to quantify the benefits of precast concrete over typical cast-in-place methods using a life cycle analysis for a parking garage structure located in Nashville Tennessee.

The data for the two materials will be compared …

Long Term Financial Analysis For Opry Mills Hotel And Resort, Eli Lockert

Student Scholar Symposium

In 2024 a Lipscomb Senior Design team completed a design project for the Opryland Hotel. The project, aimed at reducing humidity levels in the large greenhouse-like atrium and overall power usage, included multiple phases and equipment. This research continues the work of that team in an effort to determine whether the proposed system is a cost-effective approach. The research specifically evaluates the system outlined in the Opryland Final Design Report, completed in April of 2024. Using a holistic approach, this study employs life-cycle cost analysis (LCCA) to assess the economic feasibility of the proposed system through various empirical methods. A …

Investigating The Correlation And Synergy Of Artificial Intelligence Techniques, Construction Technologies, And Their Key Benefits, Fareed Salih, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Despite its reputation as one of the least digitized sectors, the construction industry increasingly adopts artificial intelligence (AI) and construction technologies. However, previous research has not adequately explored the benefits of AI techniques and construction technologies nor the correlations between them. This study aims to fill this knowledge gap. To this end, the authors used a multistep research methodology. First, a systematic literature review of studies published between 1985 and 2022 was conducted to identify AI techniques and construction technologies. Second, content and frequency analysis were performed to determine the benefits associated with AI and technology adoption. Finally, a survey …

Enhancing Management Of Transportation Projects: Integration Factors For Using Smart Contracts, Mariam Elazhary, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The US Department of Transportation (USDOT) delivers a wide range of infrastructure projects, backed by a fiscal year 2023 budget exceeding $100 billion. These projects face mounting pressures to meet performance, accountability, and delivery standards, driven by their dependence on public funding and their operational complexity. Transportation infrastructure presents sector-specific challenges - such as time-sensitive user disruptions, multiparty coordination, and asset intersection risks - that demand more robust, automated, and transparent project delivery mechanisms. Blockchain-enabled smart contracts have emerged as a promising solution to address these operational pain points through real-time automation, immutable data records, and decentralized transaction processing. However, …

The Equity Implications Of Pecuniary Externalities On An Electric Grid, Charles Sims, Gasser G. Ali, J. Scott Holladay, Tim Roberson, Chien Fei Chen, Islam H. El-Adaway

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The adoption of rooftop photovoltaic (PV) systems can create upward pressure on retail electricity rates as utilities are forced to spread their fixed costs of generation and transmission across a smaller customer base. Since high-income households are more likely to purchase PV systems, low-income households may be disproportionately impacted by these rate increases. Using a novel combination of agent-based computational economic modeling and a choice experiment of rooftop solar adoption, we show how this pecuniary externality between low- and high-income customers increases low-income electricity bills by 10% in an area with some of the highest poverty rates in the United …

Accident Data Analytics And Ai-Based Auditory Enhancement For Highway Construction Safety, Thinh Nguyen

All Dissertations

This research develops data-driven and AI-enhanced approaches to improve worker safety in highway construction environments. The study integrates advanced analytics and auditory signal enhancement to identify high-risk worker behaviors and improve real-time safety warnings. The work consists of three core studies. The first study applies Sequential Pattern Mining and Social Network Analysis to more than 1,000 construction accident reports to identify high-risk worker actions and their hidden sequential relationships with accident types and consequences. These insights reveal sector-specific risk patterns, supporting the creation of targeted, data-informed safety interventions. The second study introduces an AI-based auditory enhancement model built on a …

Large-Scale Experimental Study On The Impact Of Air Cleaning & Ventilation On Indoor Air Quality And Student Illness-Related Absenteeism, Daud Nosham

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

This large-scale randomized experimental field study investigated the effect of portable air purifiers (PAPs) on classroom’s air quality and student’s illness related absenteeism. PAPs were installed in 317 classrooms from various school districts located in Eastern Nebraska. The classrooms were randomly assigned into four conditions: three treatment conditions (T1, T2 & T3) and one control condition (device without any filter). T1 was equipped with HEPA filters, T2 added Activated Carbon (AC) layer to HEPA, and T3 further integrated Germicidal Ultraviolet (GUV) alongside HEPA and AC filters. The measured variables were carbon dioxide (CO2), fine particles (PN2.5) and coarse particles (PNcoarse), …

Concrete Masonry Unit Construction: Creating Educational Modules On Sustainability, Eric Dam

Construction Management

Concrete Masonry Units are one of the most widely used building materials due to their durability, fire resistance, low maintenance, and specifications. With the growing trend for sustainable construction, it is necessary to teach students how CMUs can contribute to improving environmental performance and dive deeper into multiple resource efficiency. This project developed an instructional module that introduces CMU materials, reviews performance and durability attributes of these materials, and how they are linked to well-known rating systems. The final module includes a presentation, three assignments, and one quiz that will reinforce student learning and refresh industry professionals' knowledge. The following …

Life Cycle Assessment Of A Prefabricated Modular Timber Building, Bryan Mai

Construction Management

Traditional concrete construction carries a high carbon footprint, motivating interest in lower-impact alternatives such as prefabricated modular timber systems. This project conducts a process-based life cycle assessment (LCA) using OpenLCA to evaluate the environmental impacts of a modular timber building. Material quantities from major processes were modeled as flow inputs and converted into standardized OpenLCA units. Impact categories—including acidification potential, human toxicity, and energy/resource use—were analyzed to determine which materials and processes contribute most to overall environmental burden. Results show that transportation and plumbing materials drive the largest acidification impacts, while interior finishes dominate human toxicity. This LCA establishes a …

Building Kit For K-8 Education: An Introduction To Construction Fundamentals, Marc Joynt

Construction Management

Introducing construction concepts to young students requires tools that are both engaging and easy to use, which led to the development of a laser-cut building kit designed for K–8 classrooms. The process began with hand-drawn sketches to establish a simple, age-appropriate structure. The design was then modeled in AutoCAD, where each individual component was drafted for fabrication. After completing the digital model, the files were transferred into Rhino and organized by layer to ensure accurate communication with the laser cutters used to produce the final basswood pieces. Throughout the project, challenges such as material limitations, tolerance adjustments, and simplifying complex …

Assessing Technology Adoption In The Construction Industry, Lucas D. Gibbons

Construction Management

The construction industry is steadily integrating new technologies, yet adoption varies widely depending on company size, market sector, and internal readiness. This study examines how common technologies such as drones (UAVs), Building Information Modeling (BIM), robotics and automated equipment, laser scanning/LiDAR, AI-driven scheduling or analytics tools, and augmented or virtual reality (AR/VR) are being applied in practice, and what benefits they are delivering to construction organizations. To better understand the factors shaping adoption, a survey was administered to members of the CMAC (Construction Management Advisory Council) board representing a range of contractors and industry stakeholders. The survey assessed current technology …

Building Services Engineering November/December 2025

Building Services Engineering

No abstract provided.

Advancing Life Cycle Assessment Of Mass Timber: Environmental Performance, Circular Design And End-Of-Life Strategies, Muzan Williams Ijeoma

All Dissertations

Mass timber has emerged as a leading candidate for low-carbon construction, offering the dual benefits of reduced embodied emissions and biogenic carbon storage. Yet, fully realizing its sustainability potential requires a comprehensive and context-specific understanding of its environmental performance across the entire life cycle, from raw material production to building operation and beyond end-of-life (EoL). This dissertation advances life cycle assessment (LCA) practices for mass timber by addressing critical challenges across multiple phases of its life cycle. This dissertation is comprised of three published papers, and two submitted manuscripts. First, I conducted a critical review and meta-analysis of mass …

Assessment Of Traffic Related Air Pollution Effects On Indoor Air Quality In Educational Buildings, Ahmed Gouda Mohamed, Mohamed Sherif Dr., Fahad Alqahtani Dr., Yousif Deeb Eng.

Civil Engineering

This study assesses the impact of traffic-related air pollution (TRAP) on indoor air quality (IAQ) within a Riyadh school. The main objectives are to pinpoint factors influencing IAQ and to evaluate the effectiveness of existing ventilation and filtration systems. Air quality Egg sensors monitored nitrogen dioxide (NO2), carbon monoxide (CO), and particulate matter (PM1.0, PM2.5, PM10) levels both indoors and outdoors over 30 days. Findings revealed average indoor PM2.5 and PM10 concentrations of 14.09 µg/m3 and 18.15 µg/m3, respectively, while outdoor concentrations averaged 20.63 µg/m3 and 27.88 µg/m3. A strong positive correlation was observed between indoor and outdoor PM levels, …

Mass Timber Construction: Products, Performance And Design, Anthony Harvey

Civil Engineering Professional Development Seminar

Due to their high strength, dimensional stability and positive environmental performance, mass timber building products are quickly becoming materials of choice for sustainably‐minded designers. This presentation will provide a detailed look at the variety of mass timber products available, including glue‐laminated timber (glulam), cross laminated timber (CLT), nail laminated timber (NLT), heavy timber decking, and other engineered and composite systems. Applications for the use of these products under modern building codes will be discussed, and examples of their use in U.S. projects reviewed. Mass timber’s ability to act as both structure and exposed finish will also be highlighted, as will …

From The Editors, Rully Karim Dr.

Journal of Project Management & Construction

The Journal of Project Management and Construction (JPMC) is a peer-reviewed publication dedicated to advancing the field of project management and construction, grounded in the principles outlined in the PMBOK 6th Edition. Our focus encompasses the ten knowledge areas essential to successful project management: Integration, Scope, Schedule, Cost, Quality, Resource, Communications, Risk, Procurement, and Stakeholder Management.

JPMC publishes original research papers written in English that provide deeper insights into these knowledge areas and contribute to the development of best practices in project management and construction. Submissions may include theoretical analyses, computational models, experimental observations, or a combination of both theoretical …

Critical Success Factors Of Lean Construction Implementation To Improve Construction Project Efficiency In Indonesia, Onal Putra, Rossy Armyn Machfudiyanto

Journal of Project Management & Construction

Inefficiency is still a problem in the construction industry in Indonesia and in the world. Inefficiency leads to delayed deadlines, budget overruns, and inappropriate quality. It is caused by a lot of waste in the form of activities that use resources but do not produce the expected value. Lean construction is one approach to address this problem by eliminating waste and maximizing value for users or customers. This research aims to identify and determine the critical success factors that most influence the implementation of lean construction to improve the efficiency of construction projects in Indonesia as well as the development …

Development Of Knowledge Base Of Audit Process In High-Rise Building Works With Design-Build Contract Based On Iso 19011:2018 And Regulation Of The Minister Of Public Works And Housing No. 10 Of 2021, Zafira Alysha Fadli, Danang Budi Nugroho

Journal of Project Management & Construction

In achieving the long-term development goal of Advanced Indonesia, the Government continues to accelerate the completion of infrastructure development, such as strategic and priority projects that support economic transformation. Infrastructure development is still one of the main focuses of the Indonesian government, the 2024 state revenue and expenditure budget (APBN) is allocated to the infrastructure budget. The massive construction of high-rise buildings in Indonesia, the number of accidents is getting higher, so it is necessary to implement an audit process on construction work. The audit process is to know and monitor directly the procedures that have been applied optimally. Therefore, …

Dam Construction Project Planning: A Case Study Of Watershed Management In Poncol District, Fikrian Fajar Muhammad, Audy Christian Rayvano Kalalo

Journal of Project Management & Construction

Despite the rapid growth of infrastructure development in Indonesia, water resource management remains a major concern, especially in regions with high climate variability like Poncol District. This study aimed to identify and analyze the Watershed (DAS) in Poncol District, East Java, using a comprehensive approach integrating GIS technology and hydrology software. The Poncol watershed, covering 19,637 km², was mapped using DEMNAS maps and analyzed with flow direction and flow accumulation. Hydrological analysis via WinTR-20 included verification, sub-area identification, cross-sectional analysis, and storm analysis. Calibration results showed consistency between manual and digital methods, while land use analysis revealed significant impacts on …