Civil and Environmental Engineering Commons^™

Evaluating The Performance Of The Jadriya Water Project For Water Treatment, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

For the purpose of evaluating the performance of the Al-Jadriya water project, water samples were taken before and after the sedimentation basins to find out the efficiency of the sedimentation ponds, as well as water samples were taken before and after the filtration basins, to know the efficiency of the filtration basins by conducting the following tests on them (Turbidity, TDS, TC, pH) to ensure that these ponds work properly. It was found that the efficiency rate of sedimentation ponds was 83%, which indicates the inefficiency of these ponds, as well as the inefficiency of the fast and slow mixing …

Possible Developments Of The Industrialization Of Appropriate Building Subsystem For Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

Industrialization of building has developed very rapidly in industrialized countries as well as in many other parts of the world to fulfill the need for housing and public buildings after the Second World War. Prefabricated building is defined as a type of building that consists of several elements or modular units prepared in advance and assembled on-site. The term prefabricated indicates that these building elements are manufactured in the workshop or factory and then combined with other elements. Iraq has witnessed vital development in the construction industry sector. The study investigates the appropriate technology for Iraq, considering resources, economy, labor, …

Ion Exchange Method For Sulphate Removal From Treated Wastewater Of Al-Doura Refinery, Rana Mohammed Rasheed

Al-Esraa University College Journal for Engineering Sciences

The treated wastewater by the industrial Wastewater Treatment Plant (WWTP), commonly named (INGECO) in Al-Doura refinery, suffers from highly sulfate concentrations that exceed the EPA specified limits of 250 mg/L. Laboratory water quality historical data have been reviewed and analyzed to determine the annual rate, maximum, and peak sulfate concentrations, which were found to be 360 mg/L, 425 mg/L, and 550 mg/L, respectively. A field inspection was conducted to identify the reasons for the high sulfate concentrations in the wastewater of most refinery process units. It was found that the maximum required sulfate remaining concentration should not exceed 10 mg/L …

The Effect Of The Spirit Of The Place On The Formulation Of Emotion In Contemporary Arab-Islamic Architecture, Mahdi Saleh Al-Faraj, Dania Saleh Yaheia

Al-Esraa University College Journal for Engineering Sciences

Arab-Islamic architecture is characterized by both constants and variables, with spiritual aspects (content) representing the constants and physical aspects (form) representing the variables. It evolves based on changing times and needs, with compassion being a significant feature associated with its spiritual aspects. Compassion is essential for collective agreement and individual emotional connection in Arab-Islamic architecture. The present research aims to investigate the influence of the spirit of the place, as embraced by designers, on the emotional characteristics of contemporary Arab-Islamic architecture. The research problem identified is the lack of a theoretical concept regarding the impact of the spirit of the …

The Effect Of Bioenergy Systems On The Architectural Product The Effect Of Fung Shui And Biogetric To Achieve The Performance Of Architectural Space, Abdullah Saadon Al-Mamoory, Ann Samari Ibrahim

Al-Esraa University College Journal for Engineering Sciences

This research presents an analytical study exploring the vital systems of energy science and their influence on architecture by examining ancient environmental philosophies like Feng Shui in China and bio-geometry in Egypt. These philosophies serve as guiding principles for studying energy and its impact on human daily life, highlighting their effects on integrated ecosystems in the design of residential buildings at both external and internal levels. The study examines key aspects such as the influence of energy on furniture arrangement in living spaces. The primary objective is to establish a synergistic relationship between architectural design of residential spaces during occupancy …

Some Aspects Of The Suitability Of Three-Story Residential Buildings For Vertical Housing In Iraq, Wisam William Saleem Al-Ayoubi

Al-Esraa University College Journal for Engineering Sciences

This research initially aimed to examine the changes in housing since the 1930s, driven by rapid population growth and evolving lifestyles, juxtaposed with advancements in contemporary building materials that are environmentally compatible. After a comprehensive analysis of housing and living arrangements throughout history, including the evolution of open house units towards more interior-focused designs such as the Baghdadi house with its central courtyard, the study delved into the significant changes and the challenges posed by the rapid population growth. The focus of the study was on the viability of vertical housing in Iraq and the considerations related to low-rise residential …

Role Of Iconic Architecture In Sustainable Tourism Development, Basim H. H. Al-Majidi, Ann Samari Ibrahim

Al-Esraa University College Journal for Engineering Sciences

Architecture "is an expression of the way of life and the spirit of the ages and cultures in which I grew up" as the buildings speak for themselves. While tourism is a scenario "to define a city to an unfamiliar audience and acquire an identity for a citizen". Both architecture and tourism have been linked together since time immemorial. Architecture was the main aspect of attracting crowds, while tourism helped architecture survive the test of time as well as money. Both tourism and architecture operate in a symbiotic manner to break the lack of familiarity with any culture and to …

Systematic Design, Optimization, And Sustainability Assessment For Generation Of Efficient Wastewater Treatment Networks, Kirti Maheshkumar Yenkie, Emmanuel A Aboagye, Sean M. Burnham, James Dailey, Rohan Zia, Carley Tran, Maya Desai

Henry M. Rowan College of Engineering Departmental Research

Due to population growth and economic development, there has been an increase in global wastewater (WW) generation footprint. There are different technologies associated with the wastewater treatment (WWT) process. The challenge is to select technologies that minimize the cost of treatment, as well as meet purity requirements. Further, there is a need to integrate sustainability analysis to facilitate a holistic decision. With the application of systems engineering, sustainable and cost-effective solutions can be achieved. In this work, we apply systems engineering to generate a sustainable and cost-effective solution. A superstructure was generated by categorizing technologies into four treatment stages. After …

Exploration Of The Sludge Biodiesel Pathway, Zachary Christman

Department of Agronomy and Horticulture: Dissertations, Theses, and Student Research

Wastewater sludge is an overlooked source of fat, oil, and grease (FOG) that could be converted into biodiesel. The United States produces about 8 million tons of sludge per year. The disposal cost for this amount of sludge is about 2 billion US dollars. The widespread availability and low cost of sludge compared to other biodiesel raw materials make it an economical choice for a renewable fuel. Using sludge as a raw material can produce 25 to 30 mg per gram of fatty acid methyl ester (FAME); the main component of biodiesel. Sludge biodiesel has the potential of transforming a …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Master's Theses

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Valorization Of Secondary Agriculture Residues, Narendra Kumar

Doctoral Dissertations

Secondary agriculture residues have the potential to be major contributors as resources for energy and sustainably sourced materials production. Separating secondary agricultural residues, which have already been transported to processing centers, into individual biomass components could convert these wastes into bioproducts. Many types of pretreatments to achieve this separation involve chemicals that are hazardous for the environment. Several deep eutectic solvents (DES) that are biocompatible have been investigated for their ability to deconstruct rice hulls and sugarcane bagasse. Mass yield, enzymatic hydrolysis of the pretreated biomass, fiber analysis, and Fourier transform infrared spectroscopy have confirmed that the DES formic acid:choline …

Household Income And Air Pollution At Public Schools In The United States, Katyland Facas, Kristina Wagstrom

Honors Scholar Theses

Poor air quality at schools may negatively impact students’ academic performance.1 2 3 In this study we look at the relationship between ambient, outdoor air quality and student socioeconomic status at United States public schools. We used free and reduced lunch eligibility, as part of the USDA’s National School Lunch Program, as an indicator of household income. We focus on nitrogen dioxide (NO2), ozone (O3), and particulate matter smaller than 2.5 microns (PM2.5). We used ambient pollutant concentration estimates at census block group resolution (Kim et al.) as the outdoor air pollution concentration at each school.4 We found a positive …

Annealing Of Encapsulated Heavy Metals From Brine Water Utilizing Microwave Enabled Sol-Gel Process, Adam Michael Flynn

Electronic Theses and Dissertations

Various waste encapsulation strategies have been investigated to solidify and stabilize heavy metal wastewater for proper long-term storage. This work aims to enhance a method of novel sol-gel encapsulation of heavy metals from mock brine waters using tetramethyl orthosilicate with the addition of an annealing step at various temperatures in order to reduce leaching of metals from the silica monoliths when exposed to water. The metals tested for encapsulation and leaching were mercury (II) chloride, potassium dichromate, sodium selenite, boric acid, cadmium chloride, and copper (II) acetate. The annealing of the silica monoliths led to an increased degree of for …

Surface Modified Polypropylene Membranes For Treating Hydraulic Fracturing Produced Waters By Membrane Distillation, Tharaka Hawpe Gamage

Graduate Theses and Dissertations

Membrane distillation is an emerging technology for treating hydraulic fracturing flowback and produced waters. Suppression of membrane fouling by inorganic and polar and non-polar organic compounds is a challenge. Here polyhydroxyethyl methacrylate, polyacrylic acid, polvinylallyl imidazolium bromide and polyvinylhexyl imidazolium bromide chains have been grafted from the membrane surface. Fouling is initially due to adsorption of organic compounds followed by scale formation. When challenged with produced water, membranes modified with polvinylallyl imidazolium bromide chains provided the greatest resistance to fouling. For EC pretreated produced water and synthetic produced water that contained mainly inorganic species, the flux decline was much less.

Effect Of Humic Acid On Co2-Wettability In Sandstone Formation, Mujahid Ali, Faisal Ur Rahman Awan, Muhammad Ali, Ahmed Al-Yaseri, Muhammad Arif, Mónica Sánchez-Román, Alireza Keshavarz, Stefan Iglauer

Research outputs 2014 to 2021

Hypothesis: Millions of tons of CO2 are stored in CO2 geological storage (CGS) formations (depleted oil reservoirs and deep saline aquifers) every year. These CGS formations naturally contain small concentrations of water-soluble organic components in particular humic acid (HA), which may drastically affect the rock wettability - a significant factor determining storage capacities and containment security. Hence, it is essential to characterise the effect of humic acid concentration on CO2-wettability and its associated impact on storage capacity.

Experimental: To achieve this, we measured advancing and receding contact angles at reservoir conditions using the pendant drop tilted plate method for various …

Experimental Study Of Hollow-Core Slab Containing Waste Pet Bottles, Mulia Orientilize, Josia Irwan Rastandi, R. M. Dimas Aries C., Marsha Niken P., Krisna Adi S.S., Abimantrana Abimantrana

Makara Journal of Technology

This study investigated the utilization of plastic-waste concrete as an effort to reduce urban waste problems. The waste plastic bottles were utilized to form the hollows of the hollow-core slabs (HCSs). The bottles were made of polyethylene terephthalate (PET). As a part of green research to reuse waste material, shredded PET was also added to the concrete mixture to improve the HCS strength. The cast-in-site HCS could be constructed without any difficulties. Three parameters were investigated: the effects of void content, shredded PET content, and steel-fiber (SF) content on the HCS ultimate bending capacity (Mu). Fifteen specimens were tested under …

Improving The Intellectual And Social Development Of Children With Autism: Design Of A Training Center For Autism, Hasti Jalalian

Makara Journal of Technology

Research on the relationship between the role of architecture and the psychology of children with autism, which indicates that appropriate environments for these children can have a significant effect on their healthcare process, has been recently conducted. However, statistics show that autism spectrum disorders are pervasive, and its extent in Iran has been increasing. Moreover, centers that are specifically designed for children with autism are limited, and paradigms are made without considering the mood of these children. Given the role of architecture in designing a suitable space for these children, an investigation that can identify the specific requirements of these …

Numerical Study Of A Buckling Restrained Brace (Brb) In Steel Structures And Comparison With A Convergent Ordinary Brace (Ocb) Under Static And Dynamic Loading, Fatemeh Habibpour

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Analysis Of The Interfacial Reaction Between Bulk Metallic Glass Coated Copper, Nickel, And Titanium With Lead-Free Solders, Andromeda Dwi Laksono, Yee-Wen Yen, Rifqi Aulia Tanjung, Teodoro A. Amatosa, Ruki Harwahyu

Makara Journal of Technology

Bulk metallic glass (BMG) has good mechanical strength, high hardness, wear resistance, and corrosion resistance with promising application in various industries. However, for the industrial production of BMG, the main issue is how to overcome limitations of joining with other materials. The present study focuses on solder processing at low operating temperature to avoid exceeding the recrystallization temperature. A feasible joining process for BMG was developed using lead-free solders. The BMG surface is pre-plated with copper, nickel, or titanium as a wetting layer. The reaction temperature is set between the glass transition temperature of BMG and the melting point of …

Design Of Ac Microgrid Topology With Photovoltaic Uncertainties In A Rural Village, Vannak Vai

Makara Journal of Technology

Energy needs are increasing day by day, especially for developing countries, due to population growth and changing lifestyles. A suitable microgrid topology with renewable energy integration is considered to fulfill the people and society’s needs. This paper focuses on the design of AC microgrid topology for a nonelectrified village with the integration of PV uncertainties in both sitting and sizing. The development of an optimal algorithm based on the conductor use minimization and unbalanced load improvement is proposed. The shortest path is proposed to search for the minimum conductor use. Then, the algorithm for improving the unbalanced load with two …

Mean-Shift Object Tracking Algorithm With Systematic Sampling Technique, Yoanes Bandung, Aris Ardiansyah

Makara Journal of Technology

Mean shift is a fast object tracking algorithm that only considers pixels in an object area, hence its relatively small computational load. This algorithm is suitable for use in real-time conditions in terms of execution time. The use of histograms causes this algorithm to be relatively resistant to rotation and changes in object size. However, its resistance to lighting changes is not optimal. This study aims to improve the performance of the algorithm under lighting changes and reduce its processing time. The proposed technique involves the use of sampling techniques to reduce the number of iterations, optimization of candidate search …

Analysis Of Correlation And Mapping Of Chlorophyll-A Concentrations And Sea Surface Temperatures In Coastal Areas Based On Terra Modis Satellite Image Data, Hendrata Wibisana, Bangun Muljo Sukotjo, Umboro Lasminto

Makara Journal of Technology

Ecosystems in aquatic environments are distinct from ecosystems on land. Changes that occur in ecosystems in aquatic environments affect the lives of biota in these waters, including the fish used as a food source in fishing communities in coastal areas. This study aims to determine the role of remote sensing in mapping and analyzing the relationship between the parameters of sea surface temperature and chlorophyll-a concentrations on the coast. The correlation of sea surface temperature with chlorophyll-a concentrations is modeled via linear regression. An analysis of variance test is performed to establish the suitability of the temperature data for the …

Corrosion Rate Prediction In Frp-Concrete Repair, Mohammad A. Khawaja

USF Tampa Graduate Theses and Dissertations

Research has proven that wrapping structural elements with fiber-reinforced polymers (FRPs) slows down chloride-induced corrosion rate but does not stop it. Although FRP has been used for corrosion repair for over 40 years, predictive corrosion rate models for FRP-concrete systems are limited in literature. This dissertation presents an oxygen diffusion-based predictive framework to estimate corrosion rate in FRP-concrete systems.

The dissertation has three main components. First, a core framework that is referred to as Khawaja-Sen-Bhethanabotla (KSB) model. In the KSB model, statistical methods were used to extend experimental data on oxygen permeation coefficients. These data were for one and two …

Open-Field Scale-Model Experiments Of Fire Whirls Over L-Shaped Line Fires, Yuto Iga, Kazunori Kuwana, Kozo Sekimoto, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This paper presents the results of open-field scale-model experiments of fire-whirl formation over line fires. L-shaped line fires were burned in crosswinds, and the processes of fire-whirl formation were observed. The flame height was measured using an image-processing technique, while two-dimensional velocity components were measured at two different locations using ultrasonic anemometers. Two tests were selected for comparison: test A, in which intense fire whirls repeatedly formed, and test B, in which no whirls were observed. In test A, the wind flow was bent by the fire plume, creating swirling flows near the burning area, thereby forming fire whirls. On …

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison

Chemical and Biochemical Engineering Faculty Research & Creative Works

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO₂.

Influence Of Rock Wettability On Thf Hydrate Saturation And Distribution In Sandstones, Ghazanfer Raza Abbasi, Ahmed Al-Yaseri, Abubakar Isah, Alireza Keshavarz, Sefan Iglauer

Research outputs 2014 to 2021

Natural gas trapped in hydrate deposits is a potentially enormous source of energy which can in principle be extracted from the underground reservoir structures. These reserves can potentially also catastrophically release very large quantities of greenhouse gases to the atmosphere. One key parameter which is well known to strongly influence fluid distribution, saturation, and production is rock wettability. However, the effect of wettability on gas hydrate in sediments has not been investigated yet. We thus used nuclear magnetic resonance (NMR) spectrometry to measure relaxation times (T₂ and T₁) and the corresponding surface relaxivity of tetrahydrofuran hydrate …

Chlorination As Drinking Water Disinfection Technique And Disinfection By Products: A Scientometric Analysis, Sapna Ramchandra Shinde, Sayali D. Apte Dr, Kanchan C. Khare Dr, Philipp Otter Mr

Library Philosophy and Practice (e-journal)

The Sustainable Development Goals (SDG) 2015, defined to achieve a better and more sustainable future, contains goal number 6 related to safe and affordable drinking water facility for all till 2030. The rural and remote areas in the developing countries predominantly face the scarcity of pathogen free drinking water leading to water borne diseases and deaths due to consumption of contaminated water indicating a need of advancement in the drinking water disinfection techniques. The paper discusses scientometric analysis of publication trends in chlorination as a popular disinfection techniques and research related to the Disinfection By Products (DBPs) that are produced …

Development Of Novel Polymeric Materials For Their Application In Monitoring And Remediation Of Environmental Pollutants, Rishabh Shah

Theses and Dissertations--Chemical and Materials Engineering

Remediation of environmental pollutants from water is one of the major challenges in the 21st century. Utilizing novel polymeric materials to accomplish this challenge has garnered a lot of interest in recent times. Flexibility in synthesizing as well as functionalizing makes them attractive for their application in pollutant remediation. This work is based on development and characterization of novel crosslinked polymeric as well as linear polymeric materials from biphenyl-based monomers, biphenyl based crosslinker and a temperature responsive monomer (Nisopropylacrylamide (NIPAAm)) for their application in remediation of toxic pollutants such as polychlorinated biphenyls (PCBs), polyaromatic hydrocarbons (PAHs) and iron oxide nanoparticle …

Strengthening Prestressed Concrete Bridge Girders And Building Beams With Carbon Fiber Reinforced Polymer Sheets, Herish A. Hussein, Zia Razzaq

Civil & Environmental Engineering Faculty Publications

The effect of Carbon Fiber Reinforced Polymer (CFRP) retrofitting and concrete type on the flexural strength of prestressed concrete I-section girders used in bridges and beams in buildings is investigated. Non-linear moment-curvature relationships are predicted using an iterative algorithm for both non-retrofitted and CFRP-retrofitted prestressed concrete girder and beam cross-sections with various concrete types. Two different CFRP-retrofitting schemes are analyzed for comparing their effectiveness. It is found that although non-retrofitted beam section exhibits greater ductility, the use of CFRP retrofitting in both tension and compression regions simultaneously results in a significant increase in flexural strength. It is also found that …

Influence Of The Shaping Process On The Tensile Properties Of Steel Reinforcement Bars Carbon Steel Grades Bjtp24 And Bjts40, Nuraziz Handika, Ridha Amalia Idhar, Jessica Sjah, Essy Arijoeni, Elly Tjahjono

Makara Journal of Technology

According to the current applicable national standard in Indonesia, i.e. SNI 07 2529 1991, in addition to the limitation on the loading rate, the steel bar must be reduced, formed, or lathed, as part of the shaping process of samples. This study determined and compared the effect of the shaping process on the yield strength, ultimate strength, and percent elongation by conducting tensile tests of steel bar grade BJTS40, i.e. deformed bar type of steel, and grade BJTP24, i.e., plain bar type of steel. Three diameters of the deformed bar (BJTS40) and one diameter of the plain bar (BJTP24) were …