Civil and Environmental Engineering Commons^™

Damage Stability Study Of A 500 Dw Ro-Ro Ferry Vessel, Zulfaidah Ariany, Budhi Santoso, Sarwoko Sarwoko, Nauval Abdurrahman Prasetyo

Makara Journal of Technology

The development of the crossing transportation industry is currently increasing in the island areas. The use of Ro-Ro type ferry boats is extremely efficient in moving people, goods, and vehicles. The current research focuses on the damage stability of the 500 DWT Ro-Ro ferry, which aims to meet the needs of the Ro-Ro ferry in the archipelago area. The previously existing initial design of a barge hull with a main size Lpp = 40.15 m, B = 12 m, H = 3.2 m, and T = 2.15 m was used to analyze the damage stability condition further. First, the drawings …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …

Relative Rate Observer Self-Tuning Of Fuzzy Pid Virtual Inertia Control For An Islanded Microgrid, Ahmed H. Mohamed, Helmy M. El Zoghby, Mohiy Bahgat, A. M. Abdel Ghany

Future Engineering Journal

Expanding the usage of renewable energy in islanded microgrids leads to a reduction in its total inertia. Low inertia microgrids have difficulties in voltage and frequency control. That affected saving its stability and preventing a blackout. To improve low inertia islanded microgrids' dynamic response and save their stability, this paper presented relative rate observer self-tuning fuzzy PID (RROSTF-PID) based on virtual inertia control (VIC) for an islanded microgrid with a high renewable energy sources (RESs) contribution. RROSTF-PID based on VIC's success in showing remarkable improvement in the microgrid's dynamic response and enhancement of its stability. Moreover, it handles different contingency …

Fabrication Of Thin-Film Composite, Reverse-Osmosis Membranes With Polyethylenimine Modifications For Enhancing Membrane Fouling Resistance, Stephanie N. Hamilton

Master's Theses

Increasing water reuse opportunities for communities has become increasingly important as access to clean water is becoming more scarce. Reverse Osmosis (RO) is an advanced treatment technology used in water recycling wastewater for potable reuse applications. RO is a promising technology; however, the membranes have limitations including their high energy demand and their susceptibility to membrane fouling. The main objective of this study was to develop a reproducible method for the fabrication of RO membranes with enhanced flux and reduced susceptibility to fouling. Literature contains numerous publications on fabrication of thin film composite (TFC) RO membranes with high performance. However, …

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva

Technical science and innovation

This paper considers the issues of establishing the relationship between the properties of fabric, clothing design and the comfort of clothing; communication of the size of the human body, allowance for free fitting, modern design when developing the design of clothing; connection of the allowance for free fitting with a suitable air gap. A diagram is given that characterizes the dependence of the comfort of clothing on its design and properties of fabrics. A mathematical model of the processes of air exchange in the underwear space is considered, which will allow obtaining more complete information and establishing more stringent dependences …

Élimination Des Vapeurs Toxiques Par Oxydation : Développement De Procédures D'Évaluation Des Systèmes De Purification De L'Air Des Conduits De Ventilation, Chang-Seo Lee, Fariborz Haghighat, Alireza Haghighat Mamaghani, Zahra Shayegan, Ali Bahloul, Mélanie Huard, Lexuan Zhong, Mitra Bahr

Rapports de recherche scientifique

L'exposition à des composés organiques volatils (COV) dans les lieux de travail peut avoir des effets aigus, notamment sous forme d'irritation de la peau, des yeux, de la bouche et du nez. Certains produits peuvent également provoquer des effets chroniques, comme l'asthme et le cancer. La prévention de tels effets nocifs sur la santé des travailleurs par l'adoption et la mise en œuvre de mesures visant à en éliminer ou à tout le moins réduire le risque s'avère importante. Parmi les approches développées à ce jour pour réduire l'exposition aux polluants de l'air intérieur – dont les COV –, la …

Removal Of Toxic Vapors By Oxidation: Development Of Laboratory Test Procedures For In-Duct Air Cleaning Systems, Chang-Seo Lee, Fariborz Haghighat, Alireza Haghighat Mamaghani, Zahra Shayegan, Ali Bahloul, Mélanie Huard, Lexuan Zhong, Mitra Bahr

Rapports de recherche scientifique

L'exposition à des composés organiques volatils (COV) dans les lieux de travail peut avoir des effets aigus, notamment sous forme d'irritation de la peau, des yeux, de la bouche et du nez. Certains produits peuvent également provoquer des effets chroniques, comme l'asthme et le cancer. La prévention de tels effets nocifs sur la santé des travailleurs par l'adoption et la mise en œuvre de mesures visant à en éliminer ou à tout le moins réduire le risque s'avère importante. Parmi les approches développées à ce jour pour réduire l'exposition aux polluants de l'air intérieur – dont les COV –, la …

Understanding Unsteady Corner Separation Within Wing-Body Junction Flows, Paul G. Winner

Doctoral Dissertations and Master's Theses

Wing-body junction flows, formed at the interface between a wing and fuselage surface, are a complex, coupled, three-dimensional, turbulent flow field. This thesis focused on the unsteady corner separation that develops at the trailing edge of this wing-body junction under certain conditions. A NACA 0015 wing mounted on a flat plate at an angle of attack of 13°was used as the model junction flow field. The wing had an aspect ratio of 8 with a linear washout twist of 15°. The Reynolds number based on the wing chord was Re_c = 4.5 × 10⁵. Time-dependent stereoscopic particle …

Design Of Solvent-Assisted Plastics Recycling: Integrated Economics And Environmental Impacts Analysis, Austin L. Lehr, Kayla L. Heider, Emmanuel A. Aboagye, John D. Chea, Jake P. Stengel, Pahola Thathiana Benavides, Kirti M. Yenkie

Henry M. Rowan College of Engineering Departmental Research

In 2018, the United States generated over 35. 7 million tons of plastic waste, with only 8.4% being recycled and the other 91.6% incinerated or disposed of in a landfill. The continued growth of the polymer market has raised concerns over the end of life of plastics. Currently, the waste management system is faced with issues of inefficient sorting methods and low-efficiency recycling methods when it comes to plastics recycling. Mechanical recycling is the commonest recycling method but presents a lower-valued recycled material due to the material incompatibilities introduced via the inefficient sorting methods. Chemical recycling offers a promising alternative …

Effect Of Degradation Of Methylene Blue Dye (Mb) By Using Erbium Oxide (Er2o3) Nps, Hind Ahmed Jasim, Farah Farman Abbass, Sarah A. Hamood, Hind Mohammed Hassan, Mohammed Sellab Hamza

Al-Esraa University College Journal for Engineering Sciences

In an experiment investigating the photo catalytic degradation of methylene blue using varied concentrations of Er2O3 nanoparticles, different conditions were tested including with and without sunshine, as well as in the absence of a UV source. The presence of a UV source was also considered in the research. UV-Visible spectroscopy was utilized to characterize the catalysts. The degradation of methylene blue dye was monitored by spectrophotometry by tracking dye absorbance at regular time intervals and adjusting the dye concentration. The results indicated that the most effective degradation of methylene blue dye occurred during a 5-hour irradiation time and in the …

Architecture Between Development And Ability Programs, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The development of architecture and its pursuit of perfection can only be achieved through society to reach a specific result when meeting new desires that arise as a result of human development, expanding individual and societal needs, and deepening their relationships in multifaceted ways. The research focuses on development as it requires a clear cumulative vision of the integrative relationship between practice and participation in interpreting the act (effect) from the force (influence). It emphasizes that the power of capabilities is understood through learning and education in describing the capabilities of architecture. This involves adopting new ideas and intellectual premises …

The Designing Of Contemporary Teaching- Learning Spaces According To Interactive Flow Action Local School Spaces-A Case Study, Aseel Jasem Al-Ataby, Anwar Subhi Ramadan Al-Qaraghuli

Al-Esraa University College Journal for Engineering Sciences

The world today faces many challenges related to environmental issues, as well as other social and economic challenges, and in light of intellectual, cognitive, and technical transformations, which led to the emergence of many new phenomena and concepts that correspond to them, including the concept of flow. This concept has been associated with many aspects of life, including architecture, whose importance has emerged recently in light of the challenge of the spread of the Corona virus and its effects on architecture with its residential, educational, and other spaces. This research focuses on the flow in the architectural space in general, …

A New Compact Triple-Band Micro-Strip Monopole Antenna Based On Minkowski Fractal Geometry, Hayder S. Ahmed, Zahra' Salah Ahmed, Sarah A. Hamood, Mohammed Sellab Hamza, Taha A. Elwi

Al-Esraa University College Journal for Engineering Sciences

Wireless communication systems have made significant advancements in size reduction, with antenna terminals remaining a primary challenge for system compatibility. As a result, much of industrial research is focused on antenna miniaturization in wireless systems. In this work, a novel compact Triple-Band Fractal (TBF) antenna is proposed, utilizing three coupling fractal patches with varying iteration levels of Minkowski geometry to provide three resonant bands. The antenna design is implemented using an antenna substrate with a dielectric constant of 10.8 and a thickness of 1.27 mm within the CST Microwave Studio environment. The zero iteration patch resonator is responsible for the …

The Role Of Community Participation In The Architectural Production, Allaa Ahmed Rasheed, Ibrahim Jawad Kadhim

Al-Esraa University College Journal for Engineering Sciences

The role of community participation as a power in building architectural output at the level of the act of thinking in architecture and the design process in non-existence is related to power and presence with act. The research is concerned with expanding knowledge in the direction of the holistic language and searching for the role that builds the privacy of the architectural product versus the community's societal identity. It studies the concept of act within the limits of existence at the level of community participation since the act of architecture is the act of man to meet certain needs and …

The Communicative Deviation In Contemporary Architectural Production, Haneen Hosham Abd-Alrahman, Panrizat Q. Hussein Fehmi

Al-Esraa University College Journal for Engineering Sciences

Deviation is one of the most important concepts discussed in various architectural and non-architectural theses when addressing the topic of creative production. It involves breaking away from the familiar and surpassing established architectural rules to create unique and excellent products that are characterized by their creativity and aesthetic appeal. Recognizing the significance of this concept in shaping contemporary architectural production, the research endeavors to explore the concept of connective displacement in architecture and delve into its essential aspects. The research identifies the research problem as the "cognitive deficiency surrounding connective displacement in the semantic structures embedded in architecture." The objective …

Developed Rc4 Algorithm With Double Reverse For Better Data Protect, Fouad Sahib Muhamed Alkhazraji

Al-Esraa University College Journal for Engineering Sciences

Computer security plays a crucial role in protecting users' data, and cryptographic techniques are commonly used for this purpose. Encryption is a method employed to ensure data confidentiality, whether it is stored on hard drives or transferred through various media. RC4 (Rivest Cipher 4) is a cryptographic algorithm that utilizes the same key for both encryption and decryption processes. It falls under the category of stream ciphers, which are widely utilized in numerous protocols due to their flexibility and speed. RC4 employs XOR (exclusive OR) function to implement its encryption and decryption steps. In this paper, a technique known as …

Evaluation Of Material Request Order To Support Sustainable Construction, Fajar Susilowati, Nur Nahdiah Anggraeni

Makara Journal of Technology

This study was conducted on one of Indonesia’s apartment projects, in which reinforced concrete is the main structure. Based on existing project data, this project experienced a decline in the construction work’s progress, thus reducing the project’s overall progress. This decline occurred because the delivery of concrete reinforcement material was delayed. This study aimed to determine the process of material request order and its relationship with the work implementation, as well as the factors that influenced the delayed arrival of concrete reinforcement material at the project site. The method used in this study was observation and interview. Data were analyzed …

Myosin Ii Adjusts Motility Properties And Regulates Force Production Based On Motor Environment, Omayma Y. Al Azzam, Janie C. Watts, Justin E. Reynolds, Juliana E. Davis, Dana N. Reinemann

Faculty and Student Publications

Introduction—Myosin II has been investigated with optical trapping, but single motor-filament assay arrangements are not reflective of the complex cellular environment. To understand how myosin interactions propagate up in scale to accomplish system force generation, we devised a novel actomyosin ensemble optical trapping assay that reflects the hierarchy and compliancy of a physiological environment and is modular for interrogating force effectors.

Methods—Hierarchical actomyosin bundles were formed in vitro. Fluorescent template and cargo actin filaments (AF) were assembled in a flow cell and bundled by myosin. Beads were added in the presence of ATP to bind the cargo AF …

Study Of Water Desalination: A Persian Gulf City, Grégoire Saury

Student Theses and Dissertations

Water desalination represents an important challenge of tomorrow’s world. Water needs never stop to increase and certain areas of the world relies on ways to have access to this resource. Desalination is a process that offers an alternative access to this vital resource by using seawater as process input. These installations are implementing several purifications units designed to transform seawater into drinkable water. So, they eliminate salt but also any kind of pollution present in the water. Here, the goal will be to design a process able to provide drinkable water for a 200,000 habitants town located in the Persian …

Photochemical Formation Mechanisms And Applications Of Mn Oxide Nanomaterials, Zhenwei Gao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Manganese (Mn) oxides are ubiquitous in aquatic and terrestrial environments, and the rich redox chemistry of manganese is of interest in engineered systems, such as batteries and water oxidation catalysts. Mn oxides have large surface areas and are highly active in adsorption and redox reactions. Our research group recently reported photochemically-assisted abiotic inorganic oxidation of Mn2+(aq) to δ-MnO2 nanosheets in the presence of nitrate and without a microorganism, demonstrating that abiotic Mn oxidation processes are not negligible. My doctoral work focuses on investigating the effects of various aquatic chemistry parameters, including reactive oxygen species (ROS), peroxyl radical (ROO•), reactive halogen …

Advanced Nanomaterials And Module Designs For Efficient Photothermal Water Treatment, Deoukchen Ghim

McKelvey School of Engineering Graduate Student Theses & Dissertations

Water scarcity is one of the most serious challenges that human beings face, and the demand for clean water will continuously increase as populations grow. Creating potable water from saline water is an important way to meet global freshwater demands. However, current desalination techniques require high energy consumption and a large scale to be efficient, restricting their utilization in remote and underdeveloped areas. These constraints motivate the development of sustainable water treatment methods that can be used with less energy input, in small modular configurations, and in off-grid water treatment systems. As an abundant and renewable energy source, sunlight has …

Nano-Bio Interactions: Implications And Applications, Anushree Ghosh

McKelvey School of Engineering Graduate Student Theses & Dissertations

Rapid expansion of technology development at the nanoscale has underpinned a promising industry. Towards this, there remain significant information gaps which are critical with regard to decision making processes and ultimate industrial sustainability. From an implication point of view, understanding how common biological macromolecules, including glycolipids and/or biopolymers produced by bacteria and fungi, which are ubiquitous in the environment, is fundamental to predicting the behavior of released/produced nanoparticles. Conversely, other bio-based tailored macromolecules, including mussel foot protein (MFP), have significant potential as functional material coatings for advanced applications.This PhD thesis is focused on interfacial processes related to superparamagnetic iron oxide …

The Generation And Transport Of Charged Aerosols: Fundamental Study And Applications In Medicine And Energy Conversion, Hao Zhou

McKelvey School of Engineering Graduate Student Theses & Dissertations

Charged aerosols have significant implications in the field of functional material synthesis, pharmaceutical coating, and drug delivery. Electrospray systems are an effective methodology for generating highly charged monodispersed droplets in the size range from nanometer to micrometer. The prediction of surface charge, size and morphology of nanoparticles resulting from charged droplets are highly required for the precise control of nanoparticle properties and their effective utilization. However, the evolution of charged droplet is not well understood due to the existence of coulombic fission and ion evaporation processes. Thus, the goal of this dissertation is to elucidate how the precursor properties and …

Nanoscale Interfacial Control Of Ion Behaviors And Caco3 Formation In Environmental Systems, Yaguang Zhu

McKelvey School of Engineering Graduate Student Theses & Dissertations

Interfaces in environmental systems can change the distribution of pollutants and nutrients, determine the fate and transport of nanoparticles, and affect the efficiency of engineering projects. Complex interactions, including electrostatic interactions, Van der Waals interactions, chemical interactions, and ion-surface specific interactions, can all contribute to different ion, ion-pair, and nanoparticle formations near interfaces. Although environmental interfaces play critical roles, only a limited number of studies have considered the nanoscale picture of how they control ions and nanoparticles. Thus, this dissertation addresses three research questions: (1) How does sulfate chemically interact with calcium carbonate (CaCO3) during its heterogeneous formation on quartz …

Quantifying The Workability Of Calcium Sulfoaluminate Cement Paste Using Time-Dependent Rheology, Sukanta K. Mondal, Adam Welz, Carrie Clinton, Kamal Khayat, Aditya Kumar, Monday Uchenna Okoronkwo

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Poor workability is a common feature of calcium sulfoaluminate (CSA) cement paste. Multiple chemical admixtures, such as set retarders and dispersants, are frequently employed to improve the workability and delay the setting of CSA cement paste. A quantitative assessment of the compatibility, efficiency, and the effects of the admixtures on cement paste workability is critical for the design of an appropriate paste formulation and admixture proportioning. Very limited studies are available on the quantitative rheology-based method for evaluating the workability of calcium sulfoaluminate cement pastes. This study presents a novel and robust time-dependent rheological method for quantifying the workability of …

Wind Tunnel Modeling Of Jack Rabbit Ii Mock Urban Environment Gas Concentration Measurements, Sami S. Fares

Graduate Theses and Dissertations

The 2015 Jack Rabbit (JR) II field trials were conducted to improve understanding of the denser-than-air dispersion of chlorine in an urban environment. The field study involved five large-scale, outdoor release trials of chlorine in a mock urban environment (MUE) at Dugway Proving Ground (DPG). Various instrumentation was deployed, including JazTM Ultraviolet-Visible (UV-Vis) point sensors capable of measuring gas-phase chlorine concentration throughout the mock urban array.

The Chemical Hazards Research Center (CHRC) was tasked by the Chemical Security Analysis Center (CSAC) with the Mock Urban Wind Tunnel (MUWT) program to study the 2015 JR II Trials at wind tunnel scale. …

The Effective Strategies For Mitigation The Impact Of Covid-19 On Construction Projects In Egypt, Nora Magdy Essa, Ibrahim Mahdi, Hassan Mohamed Ibrahim

Future Engineering Journal

From the time when the first narrated infections in Wuhan China, in late 2019, COVID-19 has had a substantial peal on human life and health. By the early of 2020, the World Health Organization (WHO) announced the eruption of COVID-19, a public health crisis of international concern. On 11 March 2020, the World Health Organization officially announced COVID-19 a pandemic. The first case was infected in Egypt of covid-19 on Feb 14, 2020 (Gilbert et al., 2020). On 16 March 2020, the Egyptian Government began issuing decisions as preventative courses as part of the country's inclusive plan to cope with …

Estimating The Weights Of Latticed Power Transmission Towers Using Genetic Programming, Ahmed M. Ebid Dr.

Future Engineering Journal

The recent booming in the power network industry inspired a lot of researchers to develop models to estimate the optimum cost of transmission towers. Unlike previous researches which depended on design the tower from scratch, this research depends on collecting actual database from several projects around the globe and applying the well-known (GP) technique to develop a model to predict the tower weight. The accuracy of the developed formula was about 84%. The developed model could be used in early tender stage or to check design economy.

Evaluation Of Aluminum Dissolution, Current Density, And Pitting Patterns During Electrocoagulation, Monica Castro Carias

USF Tampa Graduate Theses and Dissertations

Electrocoagulation (EC) is a sustainable water treatment process involving the generation of coagulants on-site through the application of a voltage on metal (usually aluminum or iron alloys). The factors that impact EC system performance have been well researched, however further research is needed on the factors that impact anodic dissolution of aluminum electrodes, especially when the technology is transferred to full-scale applications. Electrode fouling is one of the factors that can impact dissolution of the anode during EC due to the formation of a protective oxide/hydroxide layer on the electrode surface. Previous studies have addressed electrode fouling by reversing polarity, …

Understanding The Interfacial Processes Of Reactive Nanobubbles Toward Agricultural Applications, Xiaonan Shi

Dissertations

There is a growing interest in nanobubble (NB) technology because of its diverse applications (e.g., detergent-free cleaning, water aeration, ultra-sound imaging and intracellular drug delivery, and mineral processing). NBs have a higher efficiency of mass transfer compared to bulk scale bubbles due to the high specific surface areas. The high specific surface also facilitates physical adsorption and chemical reactions in the gas liquid interface. Furthermore, the collapse of NBs creates shock waves and the formation of hydroxyl radicals (OH).

However, it remains elusive why or how NBs are stabilized in water and particularly, the states of internal pressures of NBs …