Civil and Environmental Engineering Commons^™

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

Electrified Membrane For Water Treatment And Resource Recovery: Advancing Multiscale Strategies In Gas-Involving Reactions, Jianan Gao

Dissertations

Multifunctional, modular, and scalable water treatment technologies that operate without chemical additives are crucial for addressing global water pollution challenges. While traditional membrane-based separation processes are crucial for ensuring clean water supplies, they primarily focus on pollutant removal rather than on the upcycling of pollutants into valuable resources. Electrified membrane filtration presents a robust alternative, utilizing minimal or no chemical additives and harnessing electrical power to directly reduce contaminants or produce reactive oxidants or reductants on-site.

This dissertation is dedicated to the development of innovative electrochemically reactive membranes designed to address three major challenges: (1) the engineering of electrocatalysts with …

Microwave Catalysis-Enabled Membrane Processes For Microbial Inactivation, Fangzhou Liu

Dissertations

The COVID-19 pandemic has highlighted the urgent need for advanced technologies to combat virus transmission. Traditional membrane filtration technologies primarily serve as physical barriers, capturing pollutants but failing to inactivate microbial agents such as bacteria and viruses. These membranes typically target larger particles but are ineffective against sub-micrometer viral particles. Thus, there's a critical demand for membrane filtration processes that combine robust filtration with antifouling and reaction -enabled functions for efficient pathogen disinfection. This research explores a novel microwave-assisted membrane filtration process incorporating catalytic reactions to enhance microbial disinfection and prevent membrane fouling, offering a groundbreaking solution to global challenges …

Environmental Impacts Potential Of Natural Gas Production Through Life Cycle Assessment, Akmal Al Afghani, Mochamad Adhiraga Pratama, Astryd Viandila Dahlan

Journal of Materials Exploration and Findings

Life cycle assessment (LCA) is a methodology used to evaluate potential environmental impacts in various industry sectors, including the oil and gas industry to quantify the environmental impacts and determine the processes that have significant impacts along their production cycle. This environmental impact study adheres to ISO 14040:2016 and 14044:2017 standards, using the ReCiPe methodology within a gate-to-gate scope to analyze potential environmental impacts of 1 MMSCFD natural gas production. The impact categories analyzed in this study are Global Warming Potential (GWP), Particulate Matter Formation (PM), Ozone Formation (OF), and Terrestrial Acidification (TA). The results of this study identified several …

Extraction Of Neutron-Gamma Irradiated Diffusion Pump Oils, Cooper L. Tillman

All Theses

This work successfully demonstrates solvent extraction methods for separation of oil from the by-products when two commercially available vacuum pump oils were exposed to an intense neutron and gamma-ray radiation environment. Nuclear fusion power at a commercial scale has accelerated the need for radiation resistant vacuum technology, such as oil-based diffusion pumps. Polyphenyl ether and aromatic silicone oils were irradiated at the Rhode Island Nuclear Science Center (RINSC) up to MGy absorbed doses with neutron and gamma-ray radiation. Solvent extractions were performed using hexane and isopropanol to characterize the oil extraction as a function of total absorbed dose. The by-products …

An Experimental Study On Mixed Hydrocarbon Gas On Transport Through Subsurface And Atmospheric Interfaces With Application To Natural Gas Pipline Leak Dection And Quantification, Richard Kolodziej

Civil and Environmental Engineering Theses and Dissertations

Natural gas (NG) production and usage as a fuel source have surged in recent years, becoming a critical component of the global energy system and requiring extensive belowground pipeline infrastructure. Leaks in belowground pipelines release fugitive methane (CH₄) emissions, posing significant environmental, safety, and economic risks. Effective leak detection and quantification (LDAQ) methods are essential for identifying and measuring leaks to enable timely repairs and accurately address these threats. However, few studies have characterized the effectiveness of current and advanced LDAQ survey methods for belowground NG pipelines, with existing work often limited to technology-centric evaluations or studies of …

Rock Structural Changes Monitored By Fibre Bragg Grating Sensors And Nuclear Magnetic Resonance During Static And Dynamic Carbonated Brine Core Flooding Experiments, Bruno Da Silva Falcão, Lionel Esteban, Ausama Giwelli, Ahmed Al-Yaseri, Alireza Keshavarz, Jeremie Dautriat, Stephanie Vialle, Stefan Iglauer

Research outputs 2022 to 2026

One proposed solution to reduce greenhouse gas emissions is the capture and storage of carbon dioxide (CCS) in geological formations such as depleted oil and gas reservoirs. Injected carbon dioxide (CO2) forms carbonic acid once dissolved in the formation water, which can lead to dissolution of certain types of rock minerals. This may weaken rock geomechanical properties that can jeopardize the safety of long-term storage. In this work, the use of Fibre Bragg Grating (FBG) sensors associated with Nuclear Magnetic Resonance (NMR) was investigated to measure the change in rock strain during core flooding experiments. Optical fibres were glued onto …

Understanding The Impact Of Microplastic Contamination On Soil Quality And Eco-Toxicological Risks In Horticulture: A Comprehensive Review, N. P. Gayathri, Geena Prasad, Vaishna Prabhakaran, Vishnu Priya

Research outputs 2022 to 2026

The horticulture sector, essential for global food production, confronts significant challenges with prevalent pollutants, mainly microplastics. The presence of microplastics in the food chain has induced physiological stress and a multifactorial food safety concern. The complexity of the problem, arising from intricate interactions among microplastics, organisms, and ecosystems, poses a substantial challenge to food safety, necessitating an immediate strategic perspective due to the associated risks to human health and eco-toxicology. Significant knowledge gaps persist regarding their impact on terrestrial ecosystems, especially in horticulture. This study addresses the urgent need to comprehend the implications of microplastics on soil health, eco-toxicological risks, …

Microplastic Abundance And Removal In Stormwater Using Green Infrastructure, Meghana Parameswarappa Jayalakshmamma

Dissertations

Microplastics (MPs) are increasingly recognized as a pervasive environmental contaminant, conveying other contaminants, accumulating in aquatic organisms, and posing ecological risks. The existing research has primarily focused on MPs in wastewater treatment plant effluents in surface waters. However, the role of stormwater systems in MP transport has been less explored. Given the rise in MPs from urban sources, stormwater runoff from urban areas may serve as a critical conduit for transporting land-based MPs into aquatic environments. Green infrastructures (GIs) have been recognized for mitigating flooding and improving water quality from minor storms by trapping stormwater pollutants. Yet, the capability of …

Synthesis Of Geopolymer Using Coal Fly Ash And Corn Stover, Anu Paneru

Master's Theses

The development of each nation is dependent on its infrastructure, and nations are competing with others in infrastructure, especially in the construction of roadways, since they play a vital role in the economic and social development of the nation. The conventional materials used for road construction are cement and asphalt, which pose significant environmental challenges. This thesis explores the potential of fly ash (FA) and corn stover (CS) in synthesizing geopolymer, as an alternative material for the construction of roads. The study examines the impact of FA and CS percentages and the particle sizes of CS on the compressive strength, …

Pet And Polyolefin Plastics Supply Chains In Michigan: Present And Future Systems Analysis Of Environmental And Socio-Economic Impacts, Utkarsh S. Chaudhari, Kamand Sedaghatnia, Barbara K. Reck, Kate Maguire, Anne T. Johnson, David Watkins, Robert M. Handler, Tasmin Hossain, Damon S. Hartley, Vicki S. Thompson, Alejandra Peralta, Jenny L. Apriesnig, David Shonnard

Michigan Tech Publications

Many actions are underway at global, national, and local levels to increase plastics circularity. However, studies evaluating the environmental and socio-economic impacts of such a transition are lacking at regional levels in the United States. In this work, the existing polyethylene terephthalate and polyolefin plastics supply chains in Michigan were compared to a potential future (‘NextCycle’) scenario that looks at increasing Michigan’s overall recycling rate to 45%. Material flow analysis data was combined with environmental and socio-economic metrics to evaluate the sustainability of these supply chains for the modeled scenarios. Overall, the NextCycle scenario for these supply chains achieved a …

Advancing Simultaneous Extraction And Sequential Single-Particle Icp-Ms Analysis For Metallic Nanoparticle Mixtures In Plant Tissues, Lei Xu, Xingmao Ma, John Yang, Joel G. Burken, Paul Ki-Souk Nam, Honglan Shi, Hu Yang

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Engineered Nanoparticles (ENPs) Have Been Increasingly Used in Agricultural Operations, leading to an Urgent Need for Robust Methods to Analyze Co-Occurring ENPs in Plant Tissues. in Response, This Study Advanced the Simultaneous Extraction of Coexisting Silver, Cerium Oxide, and Copper Oxide ENPs in Lettuce Shoots and Roots using Macerozyme R-10 and Analyzed Them by Single-Particle Inductively Coupled Plasma-Mass Spectrometry (ICP-MS). Additionally, the Standard Stock Suspensions of the ENPs Were Stabilized with Citrate, and the Long-Term Stability (Up to 5 Months) Was Examined for the First Time. the Method Performance Results Displayed Satisfactory Accuracies and Precisions and Achieved Low Particle Concentration …

Insight Into The Application Of Engineered Phenol Polymer Nanocomposites For Geothermal Well Applications To Modify Fracture Permeability, Fatemeh Hamidi

Civil Engineering ETDs

In enhanced geothermal systems, the efficient transfer of heat from the formation to the fluid circulating through the fracture network can be compromised when thermal short-circuiting occurs due to preferential flow through highly conductive fractures. This study introduces a pioneering approach using newly developed phenol polymer nanocomposites as an engineering solution to address the challenges associated with preferential flow in geothermal wells, which can lead to thermal short-circuiting. Multiple phenol polymer nanocomposites were formulated, incorporating aluminum oxide, COOH-functionalized graphitized multi-walled carbon nanotubes (MWCNTs), and graphene nanoparticles, each with a 0.5 wt.% polymer dosage. This research successfully modified the crosslinking process …

Investigating The Impact Of Secondary Activation Time On The Adsorption Properties Of Activated Biochar For Arsenic Removal From Wastewater, Achyuth Bharadwaj Rayarao

Graduate Theses and Dissertations (2019 - present)

Biochar, a naturally occurring and renewable carbon material, becomes porous through activation. Activated biochar is an ideal candidate for use as an adsorbent. The objective of this study is to investigate whether activated biochar derived from Colorado soft pine serves as a better adsorbent and demonstrates enhanced adsorption capabilities after undergoing secondary physical activation at various activation times. The effect of secondary action time on physical adsorption properties drawn from the analysis of isotherm plots, surface areas and pore size patterns were examined by using a physisorption analyzer. Chemical structures were identified using both ultimate and proximate analyses, while porosity …

An Assessment Of Methane Cracking Technologies For Hydrogen Production And Reduction Of Greenhouse Gases, Alisa E. Pjetrovic

2024 Spring Honors Capstone Projects - Archive

Methane reformation and methane pyrolysis involve separating, or cracking, the components of methane, leading to the production of hydrogen gas, and in the case of pyrolysis, solid carbon. Because methane is known as a leading cause of climate change, these technologies are gaining attention as the global community moves to address methane as a greenhouse gas. This study aims to assess, through a systematic literature review, the current state-of-the-art methane cracking technologies based on seven technology criteria: hydrogen production capability, environmental impact, value of carbon produced, reaction stability, operating temperature requirements, energy requirements, and Technology Readiness Level (TRL). This study …

Enhanced Phosphogypsum Thermal Reduction By Carbon In Presence Of Sodium Chloride At High Temperature, Li Chao, An Xuebin, Jing Hu, Yixiao Wang, Shizhao Wang, Yunshan Wang, Gang Yang, Yong Sun

Research outputs 2022 to 2026

This paper reports an enhanced approach of thermal reduction of phosphogypsum (PG) in the presence of sodium chloride (NaCl) in its molten phase. The thermodynamic together with in-situ thermogravimetric-Fourier transform infrared spectroscopy (TG-FTIR) result indicates the yield of CaS (solid) at the investigated temperature range (800–850 °C). Addition of NaCl not only appreciably reduces the activation energy of this reaction (800–850 °C) on average from 315 to 175 (kJ·mol−1) materially, but also significantly improve the conversion from CaSO4 to CaS. Additionally, the NaCl based waste salt (NaCl-WS) containing organic compounds (0.21 wt%) was found to produce similar results when compared …

Smart Manufacturing Of Cement: From Lab-Scale Simulation And Testing To Industry-Scale Deployment., Juan David Tabares Tamayo

Electronic Theses and Dissertations

Cement kilns are controlled by experienced process operators who follow experience-based industry guidelines using data collected and fundamental knowledge. The manufacturing process, which is equipped with sensors and equipment, transfers data/information to the operators to aid standardized decision-making operations. In contrast, companies have used such data to develop and implement digital solutions for predictive control systems; in effect, FLSmidth and Rockwell Automation. However, despite the availability of automated control systems and investigation in automation for process monitoring and optimization, opportunities to radically optimize cement manufacturing are still abundant and in need of implementation. Therefore, this research developed simulation models and …

Seeding Effects Of Submicron Caal-No3 Ldh Particles On The Hydration And Properties Of Portland Cement And Sulfoaluminate Cement Pastes, Sukanta K. Mondal, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Layered double hydroxide (LDH) is reported to improve the durability of concretes, primarily due to its ability to exchange anionic species, including chloride, which is implicated in corrosion-driven durability issues. However, there is no comprehensive study investigating the effect of LDH on the properties of different cement systems at both early and mature ages. in this study, the early age and mature age properties of Portland cement (OPC) and calcium sulfoaluminate (CSA) cement pastes seeded with submicron-sized calcium aluminum-NO3 LDH (CaAl-NO3 LDH) were investigated. the effects of the 1–5%mass dosage of LDH on the hydration of both cement systems were …

Thermo-Elasto-Plastic Stability Of Biaxially Loaded Hollow Rectangular Section Steel Beam-Columns With Applied Torsion, George Adomako Kumi

Civil & Environmental Engineering Theses & Dissertations

Presented herein is an experimental and theoretical study of biaxially loaded hollow rectangular section steel beam-columns with applied torsion at elevated temperatures. The theoretical analysis is based on a system of simultaneous materially nonlinear differential equations of equilibrium for which an iterative semi-analytic solution approach is formulated. Although the primary goal of this research is to study the influence of elevated temperatures on the steel member with the complex loading, rigorous analysis is also conducted of the member at ambient temperature for comparison. The experimental part of the study involves conducting tests on the members at both ambient and high …

Quasi-Static And Impact Load Response Of Bfrp-Reinforced Concrete Beams And Post-Terrorist-Attack Sub-Assemblages, José Luis Carrasquillo

Civil & Environmental Engineering Theses & Dissertations

This dissertation presents the outcome of a theoretical and experimental study of Basalt Fiber Reinforced Polymer (BFRP) reinforced concrete beams and post-terrorist-attack subassemblages subjected to either quasi-static or impact load. Both BFRP reinforcement as well as BFRP fabric are used in this investigation. The sub-assemblage consists of an otherwise two-span beam converted to a fixed-end single-span one owing to the loss of a middle column blasted off during the terrorist attack. The simply supported beams are subjected to a midspan quasistatic or an impact load. However, each sub-assemblage is subjected to a quasi-static load up to collapse to simulate the …

Steminism: Analyzing Factors That Improve Retention Of Women In Stem, Kira Carter, Jane Kelley, Jason Vasser-Elong, Rc Patterson

Dissertations

Our co-authored research ‘Steminism: Analyzing Factors That Improve Retention for Women as STEM Majors’ analyzed factors that contributed to the retention of women in science, technology, engineering, and mathematics (STEM) programs at Missouri University of Science & Technology (Missouri S&T). Women make up half of the US population, and while careers in (STEM) are an integral part of the US economy, women are underrepresented in these career fields. The purpose of our dissertation is to address the underrepresentation of women in STEM majors. Our methodology included homogeneous sampling to collect qualitative data. More specifically, we consulted with academic advisors and …

Identification Of Early Opportunities For Simultaneous H2 Separation And Co2 Storage Using Depleted Coal Seams, Masoud Aslannezhad, Mohammad Sayyafzadeh, Stefan Iglauer, Alireza Keshavarz

Research outputs 2022 to 2026

Hydrogen (H2) production by steam methane reforming (SMR) is an economically viable technique on a commercial scale. However, this process produces large amounts of carbon dioxide (CO2), which eventually negates the benefits of employing H2 as an industrial input and clean energy carrier. This issue has led to increasing interest in capturing CO2 emissions from SMR to produce H2. This study proposes and investigates the use of coalbed methane (CBM) resources for separating the mixture of H2 and CO2 gases. The competitive adsorption mechanism in CBM not only can separate the H2 gas from the mixture but also results into …

Strategies To Mitigate Efflorescence In Walls Constructed Using Clays Bricks; A Review Article, Marwa Abdulkareem. Anber, Soran Abdulrahman Ahmad, Naros Rahman Mahmoud, Kawan Fuoad. Kayani, Mohammed Ali Abdulrehman

Al-Esraa University College Journal for Engineering Sciences

_{The construction of buildings, especially residential housing for communities, is a significant industry on a global scale. Masonry units such as bricks, blocks, and stones are often utilized materials. Bricks are highly regarded because to their widespread availability, cost-effectiveness, and excellent insulating capabilities. Nevertheless, the presence of efflorescence presents a difficulty in the construction of brick walls. Efflorescence refers to the process in which salts move to the outer layer of the brick, resulting in the formation of white deposits and negatively impacting its visual appeal. Efflorescence is caused by various circumstances, such as the existence of salts in bricks, …}

The Importance Of Cryptography In Cloud Computing, Saja Alaam Talib

Al-Esraa University College Journal for Engineering Sciences

Cloud computing has grown as a widely accepted concept simultaneously, as the alarms for the security of data and information. This paper seeks to establish the comprehensive roles of cryptography in tackling these issues in the Cloud environment. The study begins with the historical background of cryptography and then moves on to analyze trends in information technology before discussing on the challenges to security in cloud computing. The goal of its publication is to highlight the importance of using cryptographic technologies for the protection of information confidentiality, its integrity and compliance. The combination of literature review and the case study …

A Concept Of Producing Aluminum In-Situ On The Moon Through Molten Salt Electrolysis, Jacob N. Ortega, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daniel Stutts, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

This paper presents a concept of producing aluminum in-situ on the lunar surface, namely, the Lunar In-Situ Aluminum Production through Molten Salt Electrolysis (LISAP-MSE) method developed at Missouri University of Science and Technology. This paper aims to demonstrate the use of electro-deoxidation to reduce aluminum oxide (i.e., alumina) into aluminum and oxygen gas via electrolysis in a molten salt bath for the production of aluminum on the Moon. It is shown that with a steady supply of hydrogen chloride, this in-situ resource utilization (ISRU) method could supply several necessary materials consumed in the electro-deoxidation process except hydrogen chloride to produce …

Sustainable Materials For Environment − Multifunctional Material Made From Dead Leaves And Nanostructured Materials For Antibiotic Degradation, Siyuan Fang

Dissertations, Master's Theses and Master's Reports

As environmental pollution from industrial processes and human activities continues to rise, finding efficient approaches to recycle waste materials and degrade persistent contaminants becomes increasingly critical. Dead leaves, an abundant but underutilized biomass, present an opportunity for creating value-added materials if their biocomponents can be preserved and transformed. Simultaneously, antibiotics such as tetracycline are widely found in water bodies but pose serious ecological and health risks, necessitating effective degradation methods. This dissertation addresses these challenges by leveraging natural and nanostructured materials to develop multifunctional products and advanced photocatalytic processes.

Chapter 3 of this dissertation addresses the challenge of converting waste …

Beneficiation Of Lunar Regolith Simulants Through Electrostatic Sieving And Magnetic Separation, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

In the light of future development of lunar structures, in-situ feldspar beneficiation is imperative for metal extraction. This research incorporates the tandem use of electrostatic sieving and magnetic separation for collecting a specific size range and mineral composition from lunar soil that optimizes subsequent chemical processing. While earlier works focused on silt-sized particles, this work expands that range up to medium-grained sand with a greater variety of potential lunar regolith compositions. This work shows that a 2.5 kV, 7 Hz to 30Hz frequency, single-phase square wave can lift silt and fine sand for collection. This lifting is successful directly from …

Kinetic Modeling Of Electrostatic Sieving For Lunar Regolith Beneficiation: Case Studies, Easton Ingram, Emmanuela Amen Eze, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

A new kinetic particle modeling framework was developed to investigate electrostatic transport of lunar regolith particles with applications to the concept of electrostatic sieving. The new approach is based on kinetic particle dynamics and includes major modules of sampling the particle size distribution, solving electric fields, and tracking motion of charged dust grains. Case studies for a concept of electrostatic sieving were chosen to validate the new model. The simulation achieved similar yields reported in previous works, which served as validation of the model. The new model is computationally efficient and could serve as a design, analysis, and optimization tool.

Determination Of Spore Viability In Concrete Across Several Factors Using Most Probable Number, Samuel Boyer

Williams Honors College, Honors Research Projects

To determine the lowest concentration of spore added to polyurethane-cement composite (PUCCO) particles that can still germinate after curing in concrete. This research project is a small addition to the larger research project being undertaken by Mirza Mohammed Rashiduzzaman for his Masters. The larger project involves the use of fungal spores added in concrete to act as a self-healing component when cracks form in the concrete structure over time. These spores are suspended in a protective oil and loaded into small, hardened sponge-like PUCCO cubes to act as growth points when water and air can reach the PUCCO in the …

The Impact Of Modern Buildings On Traditional Urban Environments And Urban Identity, Ann S. Ibrahim

Al-Esraa University College Journal for Engineering Sciences

Contemporary cities face significant challenges in integrating modern buildings into traditional urban environments while preserving urban identity. This study focuses on the relationship between modern architecture and urban heritage. The research problem revolves around how modern buildings affect urban identity in traditional areas, and whether they can interact positively with the urban context without distorting its traditional character.

The study aims to analyze this impact by examining a range of global examples using architectural indicators such as visual integration, spatial integration, material harmony, urban scale, accessibility, and environmental impact. A three-point scale (weak, partial, excellent) was applied to assess each …