Civil and Environmental Engineering Commons^™

Effect Of Household Oil Contamination And Agricultural Soil Contamination On Phyllosilicate Nanocatalyst Performance During Pyrolysis Of Polyolefins, Joey Velasquez

Master's Theses

The effect of household oil and agricultural soil contamination on catalyst performance during polyolefin pyrolysis was simulated on mixed virgin plastic pellets by evaluating contamination influence on mixed plastic degradation temperatures. Three phyllosilicate nanocatalysts including Fulcat435, Fulcat22F and Y-Zeolite were evaluated in this work based on a literature review of catalyzed plastic pyrolysis and these catalysts’ ability to lower plastic decomposition temperature by 50 °C – 100 °C. These findings were confirmed in this research through thermogravimetric analysis of a polyolefin mixture and further developed in furnace experiments containing household oil and agricultural contamination. Household oil contamination deactivated each of …

Toxicity And Biodegradability Of Novel Boronium Vs Conventional Ammonium Based Anti Microbial Compounds In Wastewater Treatment Systems, Noor Shalan

Poster Presentations

Quaternary ammonium compounds (QACs) are highly effective as disinfectants, herbicides, and pesticides; thus, overuse causes elevated levels of residual toxicity in domestic and industrial wastewater. QACs can be toxic to essential bacteria breaking down pollutants in wastewater treatment plants (WWTPs) and can remain untreated in effluent, harming the environment, and contributing to antibiotic resistance, posing risks to human health. Novel boronium-based antimicrobial compounds have demonstrated efficacy in eliminating bacteria, fungi, and viruses. If the boronium compounds exhibit lower residual toxicity, they could offer a promising alternative to QACs. Because these compounds are still in development, their potential toxicity to the …

Incorporating Recycled And Repurposed Plastic Into 100% Reclaimed Asphalt Pavement, Basant Bhatt

Graduate Theses and Dissertations (2019 - present)

The increasing awareness of sustainability in the asphalt industry has driven the use of recycled materials like reclaimed asphalt pavement (RAP) and waste plastic. This study examines the incorporation of recycled polypropylene (rPP), recycled high-density polyethylene (rHDPE), and recycled low-density polyethylene (rLDPE) at 0.3%, 0.6%, and 0.8% dosages into 100% RAP, along with the warm mix asphalt additive Evotherm® P25. Laboratory tests were conducted to evaluate the mechanical and durability performance of the modified asphalt mixtures while rutting and fatigue life were evaluated using mechanistic-empirical (ME) analysis in PerRoad software. Both plastic type and dosage had a statistically significant impact …

Feasibility Of Liquid Carbon Sources For Algae Growth, Brady S. Jones

Chemical Engineering Undergraduate Honors Theses

This thesis explores the use of electrochemically produced aqueous bicarbonate as a novel liquid-phase carbon source for enhancing algal biomass productivity. Targeting the freshwater microalgae Chlorella Saccharophila, the study investigates its growth response to varying bicarbonate concentrations and compares the efficacy of liquid bicarbonate delivery with traditional gaseous CO₂ bubbling methods. Results demonstrate that Chlorella Saccharophila can sustain growth solely on bicarbonate, and that bicarbonate-fed cultures yielded higher biomass than those supplied with gaseous CO₂ or hybrid systems. These findings validate the potential of bicarbonate-based carbon delivery for scalable algae cultivation, offering key advantages such as gas-free operation, improved …

Kinetic Growth Rate Analysis Of Coelastrella Sp. In Aquaculture Wastewater., Rob Skarvan

Master of Engineering Theses

The demand for sustainable food and energy production continues to rapidly rise. Utilizing aquaculture wastewater as microalgae growth medium is a potential opportunity for nutrient recycling and industrial symbiosis, but more research is required to understand how best to design and scale-up a dual-purpose facility. This study investigates the growth of Coelastrella sp. in aquaculture wastewater compared to industry-standard growth medium BG-11 and modified tap water as controls. Though cell size and pigment density varied throughout media, aquaculture wastewater performed very comparably to BG-11 as a microalgae culture broth.

The Monod equation can model Coelastrella sp. growth based …

Dust Analyses In Ventilation Ducts, Karolina Vyhlidalova, Petr Vlček, Olga Rubinová, Jiří Bernard

Journal of Sustainable Construction Materials and Technologies

The paper describes the importance of monitoring the dust in the atmosphere of human life. It deals with the issue of dust in air ducts, approaching the methods that can be used to detect the amount of dust. For conditions for buildings in the Czech Republic there is created the methodology of quantitative and qualitative evaluation of dust sediment for the needs of HVAC and other building surfaces. The scale for visual evaluation was created and it has been elaborated the assessment of kind of particles contained in dust.

Assessment Of Long Time Approximation Equation To Determine Thermal Conductivity Of High Porous Materials With Nss Probe, Hussein Humaish, Bastien Ruet, Laurent Marmoret, Hassen Beji

Journal of Sustainable Construction Materials and Technologies

Recent economic changes have increased the focus on energy conservation in buildings. Improve insulation represents one of the biggest challenge to save energy. The TP02 Huksefux® Non Steady State Probe (NSSP) has been used to determine the thermal conductivity of the building insulation materials. Usually, the long term approximation equation (linear form) is applied to determine the thermal conductivity when using hot wire techniques. Long term approximation has been successfully used to characterize glycerol: a fluid which doesn’t present contact resistance and porosity. But, an S-shaped appears for more porous materials. So to generalize the possibility of using this method, …

Selective Lithium Extraction Using Ion-Sieves From Geothermal Brine, Agyare Asante, Abigail Berardi, Jayla Standin, Elliott Walker, Ujjwal Pokharel, Sandeep Kumar

Graduate Student Government Association Research Conference

Lithium (Li) is a critical component in modern green energy technologies, serving as the cornerstone for advanced batteries used in electric vehicles, renewable energy storage, and portable electronics. To address the increasing global demand for lithium, this study explores the synthesis and performance of ion-sieve novel adsorbents derived from the spinel-type precursor Li₄Mn_4.5Zr_0.5O₁₂ (LMZO). The precursor was produced using an economical solid-phase reaction that involved lithium, manganese, magnesium, and zirconium salts. This was followed by a two-stage calcination process involving 200 K for 2 hours and 450 K for 24 hours. Acid activation …

Preliminary Assessment Of Non-Volatile Particulate Matter And Gaseous Emissions From A Premixed Pre-Vaporized Combustor Designed For Civil Supersonic Transport, Ugochukwu Ewuzie, Godwin Ifeanyi Ogbuehi, Steven Achterberg, Monday Uchenna Okoronkwo, Philip D. Whitefield

Miners Solving for Tomorrow Research Conference

No abstract provided.

Sorption-Spectroscopic Method For Determining Mn Ions In Wastewater, Zulayho Asanalievna Smanova, Zukhra Ziyatovna Yakshieva, Nazira Kuchkarbayevna Madusmanova, Gulyorkhon Otkir Qizi Miradkhamova

Technical science and innovation

In this article, the processes of metal complex synthesis are studied in detail. Zinc OEDF+NTF complexation reactions were carried out in the presence of polyhydric alcohols, ethylene glycol, glycerol, and citric acid. For the first time, the synergistic efficiency of a mixture of zinc OEDF+NTF complexes with methyldiethanolamine, used as an inhibitor of mineral salt accumulation, was studied. It was found that when selecting the components in equivalent amounts, the inhibition efficiency of the composition is at least 90%. The high efficiency of inhibiting mineral salt accumulation in the composition is due to the presence of methyldiethanolamine, alkylimidazoline, and their …

Environmental Life Cycle Assessment Of Class A Biosolids Production Using Conventional And Low-Cost, Low-Tech Processes At Small Water Resource Recovery Facilities, Janna Brown, Robert Handler, Jennifer G. Becker, Eric Seagren

Michigan Tech Publications

Producing Class A biosolids that can be distributed or land-applied without restriction is a beneficial way to reuse wastewater treatment solids. For small water resource recovery facilities (WRRFs) in particular, low-cost, low-tech (LCLT) processes may be an appealing alternative to conventional technologies for producing Class A biosolids, such as processes to further reduce pathogens (PFRPs). Conventional Class A biosolids treatment processes tend to be energy-intensive and involve complex equipment and operations. However, a systematic comparison of the overall sustainability of conventional processes and LCLT alternatives for producing Class A biosolids to aid decision makers in selecting treatment processes is not …

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Statistical Investigation Of Gypsum Crystallization Kinetics, Azmain A. Akash

LSU Master's Theses

Gypsum, a naturally occurring mineral salt, is frequently encountered in industrial processes such as seawater desalination and power plant cooling. Over the years, significant effort has been devoted to controlling the crystallization of gypsum through various chemical approaches, including acidification, chelating agents, and antiscalant polymers. Nevertheless, the cost associated with chemical treatments may be reduced by incorporating physical operational strategies to complement chemical methods in regulating gypsum crystallization.

This study systematically examines the comparative roles of chemical and physical entropy in the gypsum crystallization process to elucidate their respective influences on gypsum growth kinetics. Chemical entropy is manipulated by adjusting …

Corrosion Of Pipes In Soil Under Cathodic Protection, Ashley Chow

Williams Honors College, Honors Research Projects

This research project focuses on understanding how various soil properties affect the corrosion of buried pipelines that are protected by cathodic protection (CP) systems. Specifically, the study seeks to evaluate key soil characteristics, including resistivity, moisture content, and pH levels to determine their influence on the efficiency of CP systems in mitigating corrosion. Through controlled laboratory experiments, carbon steel specimens were exposed to a range of simulated soil conditions to mimic real-world environments. Corrosion rates were assessed using advanced electrochemical techniques, such as linear polarization resistance (LPR) and Tafel slopes, along with traditional mass loss methods. The primary objectives of …

Pla Polymer Binder In Core Production - Influence On Final Casting Dimensions, Artur Soroczyński, Krzysztof Rechowicz

Virginia Digital Maritime Center (VDMC) Faculty Publications

The foundry industry is seeking an ecological alternative to synthetic molding resins. This study evaluates the technological properties of core sands bonded with biodegradable polylactide (PLA). Cores prepared on a 2% quartz sand matrix were subjected to casting processes using two alloys with extremely different pouring temperatures: gray cast iron (approx. 1200 °C) and AK11 silumin (approx. 710 °C). The research methodology included macroscopic assessment, dimensional analysis using 3D scanning (GOM Inspect), and qualitative knock-out assessment supported by numerical temperature field simulation. The results showed that the high crystallization temperature of cast iron leads to complete thermal degradation of the …

Life Cycle Assessment Of Renewable Hydrocarbon Fuels Produced By The New Cool Gas To Liquid (Cool Gtl) Process, Elochukwu Okoye

Dissertations, Master's Theses and Master's Reports

The Cool Gas-to-Liquid (Cool GTL) process converts biogas and captured CO₂ into renewable hydrocarbon fuels, contributing to GHG emissions reduction in transportation. This report explains a Life Cycle Assessment (LCA) study that was completed to evaluate the environmental impact of different feedstocks, hydrogen sources, and electricity inputs. The analysis considers biogas from food waste, manure, and landfill sources, as well as biogenic, fossil, and direct air capture (DAC) CO₂ feedstocks. Results show that biogas pathways provide the greatest GHG reductions, with the best case (food and manure biogas + solar hydrogen + solar electricity) achieving a net-negative GWP …

Reuse Of Calcium Carbonate (Caco3) Recovered From Discarded Carpets As Filler In Fiber-Reinforced Polymer (Frp) Composites, Roshan Devkota

Graduate Theses, Dissertations, and Problem Reports (ETD)

Over four billion pounds of carpet are discarded annually in the United States, making carpet waste a significant environmental concern. Calcium carbonate (CaCo₃) constitutes up to 45% of the mass of most synthetic carpets. Reusing this CaCo₃ as a filler in the rapidly growing fiber-reinforced polymer (FRP) industry, which is projected to reach USD 10.38 billion, presents a low-cost, practical approach to developing a market-based solution to post-consumer carpet waste.

This study investigates the reuse of CaCo₃ recovered from discarded carpet backing as a filler in FRP composites, focusing on its mechanical viability in comparison to virgin CaCo₃. The methodology …

Black Soldier Fly Larvae (Bsfl) Bioconversion For Circular Economy: A Study In Polaman Village, Siswo Sumardiono, Rizka Amalia, Syaikha Butsaina Dhiya’Ulhaq, Nurika Nazilatul Ilmi, Hermawan Dwi Ariyanto

ASEAN Journal of Community Engagement

Conventional organic waste management methods often lead to environmental degradation and underutilization of valuable resources. In rural areas, such as Polaman Village, limited awareness and inefficient disposal systems exacerbate these issues, thus necessitating innovative and sustainable solutions. This study explores black soldier fly larvae (BSFL) bioconversion as a community-based solution for organic waste management, addresses environmental challenges, and promotes economic empowerment by converting waste into valuable by-products. The study employed a mixed-methods approach, beginning with baseline assessments of waste generation and existing management practices to identify community needs. Educational workshops and hands-on training sessions introduced BSFL bioconversion techniques to local …

Capacity Of Self Compact Concrete Walls Using Attapulgite As A Partial Replacement Of Cement Under One Way And Two Way Action Restriction, Wissam Kadhim Alsaraj, Luma Abdul Ghani Zghair, Akhlas Hashem Mohammed

Al-Esraa University College Journal for Engineering Sciences

This investigation about the structural performance of sustainable self-compact concrete walls exposed to eccentric axial regularly dispersed loading, including the effect of aspect ratio (AR) and slenderness ratio (λ) by one-way and two-way action. The experimental program includes testing ten wall panels, the eccentricity of the loading system equivalent to one-sixth of depth. These wall panels are separated into four groups, each one consisting of three specimens. first and second groups clarify the aspect ratio (H/L) effect. The results indicated for decreasing AR from (0.75 to 0.625), (0.625 to 0.5), and (0.75 to 0.5), the increase of final load is …

Exploring The Benefits Of Feature Selection Based On Bat Algorithm And Deep Learning In Brain Cancer Diagnosis, Noor Fawzi Shafiq

Al-Esraa University College Journal for Engineering Sciences

Brain cancer is considered one of the most dangerous types that must be treated as soon as possible. Therefore, it is necessary to detect brain cancer in its early stages to enhance the diagnosis of the condition. This study proposes to combine the bat algorithm (BA) with deep learning methods to identify and classify brain tumors in medical images accurately.

In this paper, the bat algorithm was used to select distinctive features from the input brain images. The Bat Algorithm (BA) is a metaheuristic optimization algorithm that mimics the echolocation behavior of bats. It efficiently explores the feature space to …

Unveiling The Hidden Threat: How Wireless Networks Fuel Serious Cyber Attacks, Ibtesam Jomaa Hawi

Al-Esraa University College Journal for Engineering Sciences

The spread of wireless networks has led to an increase in serious cyber attacks due to their weak architecture. This article focuses on reevaluating cybersecurity in wireless network technology by integrating statistical information detection methods and artificial intelligence (AI) algorithms. To construct a wireless networking scenario that accurately reflects real-life conditions, we created a data fabrication that included four pre-existing anomalies as well as four newly introduced anomalies. The synthetic dataset created from these generation processes contains 20 thousand distinguishable values, which are later divided into training and validation sets. Using the strategy described before, we began to analyze the …

A Study On Improving The Accuracy And Effectiveness Of Similarity Detection Processes In Text Files Using Nlp Techniques, Noor Abdulmuttaleb Jaafar

Al-Esraa University College Journal for Engineering Sciences

The rapid expansion of the Internet has revolutionized access to information, especially in the area of unstructured data, most of which consists of textual content. While instant access to information brings many advantages, it has also given rise to a prevalent problem – plagiarism. Copying and reusing materials without proper permission poses a significant threat to academic integrity and integrity. Rates of plagiarism, especially in academic and scientific publications, have risen with the advent of the Internet, reaching alarming levels, such as 60% in student projects. This study examines the proposed model that includes computation of similarity using cosine coefficients, …

An Intelligent System Using Deep Learning For Healthcare Monitoring In Light Of The Covid-19 And Future Pandemics Based On Iot, Sara Salman Qasim, Rajaa J. Khanjar, Jamal Nasir Hasoon, Baesher Abdullateff Abad, Ali Hussein Fadil, Shajan.M. Alsowaidi

Al-Esraa University College Journal for Engineering Sciences

Recently, the Internet of Things has become a compelling research field as a new topic of research in various disciplines, particularly in the field of healthcare, because the Internet of Things is rebuilding modern healthcare systems by integrating technology, economics, and social perspectives. The development of healthcare systems from traditional to more personalized systems in which patients can be easily diagnosed, monitored and treated and many people can be helped. People are treated and cared for remotely and this is what some people need in the crisis the world has been through like COVID-19. This epidemic is caused by the …

Speech Coding Based On A Hybrid Approach: Dct, Huffman And Run-Length Coding, Sundos Abdulameer Alazawi, Esraa Jaffar Baker, Shahbaa Mohammed Abdulmaged

Al-Esraa University College Journal for Engineering Sciences

The exponential expansion of data in the digital world necessitates the development of effective methods for data transmission and storage. Data compression (DC) strategies are suggested to reduce the quantity of data stored or conveyed due to constrained resources. As a result of DC ideas' ability to efficiently use existing storage space and transmission capacity, different methods have been developed in various areas. Speech coding is a lossy method of coding; therefore, the output signal differs slightly from the input signal. Speech coding is useful for message encryption, communication over long distances and speech quality. In the fields of digital …

The Evolution Of The University Of Al-Anbar Urban Planning Based On The Mental Picture's Diversity And The Contemporary Planning Spaces Filling, Ali Abdulsamea Hameed

Al-Esraa University College Journal for Engineering Sciences

This research concentrated on the role of environmental graphic design (EGD) and the place-making idea in the interior environment of Al-Anbar University. To develop an identity being visual for the University of Al-Anbar internal environment (IE) is this goal of project. The search sought to create and enhance the shape of the internal University of Al-Anbar vacuum by reviving the idea of place building. In order to build and filling the internal emptiness of the campus, the identity being visual must also be strengthened. The descriptive analytical approach was chosen since it was best suited to achieve the goal of …

Deciphering Mechanochemical Influences Of Emergent Actomyosin Crosstalk Using Qcm‑D, Emily M. Kerivan, Victoria N. Amari, William B. Weeks, Leigh H. Hardin, Lyle Tobin, Omayma Y. Al Azzam, Dana N. Reinemann

Faculty and Student Publications

Purpose: Cytoskeletal protein ensembles exhibit emergent mechanics where behavior in teams is not necessarily the sum of the components’ single molecule properties. In addition, filaments may act as force sensors that distribute feedback and influence motor protein behavior. To understand the design principles of such emergent mechanics, we developed an approach utilizing QCM-D to measure how actomyosin bundles respond mechanically to environmental variables that alter constituent myosin II motor behavior.

Methods: QCM-D is used for the first time to probe alterations in actin-myosin bundle viscoelasticity due to changes in skeletal myosin II concentration and motor nucleotide state. Actomyosin bundles were …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-Based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO₂, MoS₂, and Al₂O₃) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment …

Thermal Conductivity Characterization Of High Oleic Vegetable Oils Based Hybrid Nanofluids Formulated Using Gnp, Tio2, Mos2, Al2o3 Nanoparticles For Mql Machining, Anthony Chukwujekwu Okafor, Tobechukwu Kingsley Abor, Saidanvar Esanjonovich Valiev, Ignatius Echezona Ekengwu, Abiodun Saka, Monday Uchenna Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

This paper presents the results of thermal conductivity characterization of six high oleic soybean oil (HOSO) and four high oleic canola oil (HOCO)-based hybrid nanofluids formulated with four types of nanoparticles (Graphene nanoplatelet (xGnP), TiO2, MoS2, and Al2O3) at nanoparticles wt.% concentration from 1 % to 7 % in 1 % increment using the two-step method for use in MQL machining of difficult-to-cut metals. Thermal conductivity of the formulated hybrid nanofluids were measured using Thermtest Transient Hot Wire Liquid Thermal Conductivity Meter at temperatures from 25 °C to 75 °C in increment of 10 °C. Obtained results showed that thermal …

Collapse Of Pre-Covid-19 Differences In Performance In Online Vs. In-Person College Science Classes, And Continued Decline In Student Learning, Gregg R. Davidson, Hong Xiao, Kristin Davidson

Faculty and Student Publications

Abstract: Studies comparing student outcomes for online vs. in-person classes have reported mixed results, though with a majority finding that lower-performing students, on average, fare worse in online classes, attributed to the lack of built-in structure provided by in-person instruction. The online/in-person outcome disparity was normative for non-major geology classes at the University of Mississippi prior to COVID-19, but the difference disappeared in the years after 2020. Previously distinct trendlines of GPA-based predictions of earned-grade for online and in-person classes merged. Of particular concern, outcomes for in-person classes declined to match pre-COVID-19 online expectations, with lower-GPA students disproportionally impacted. Objective …

Ir Spectral Analysis Of Broussonetia Papyrefera Plant, Umid Hamroyevich Alamov, Zaytuna Ali Qizi Qurbonaliyeva, Dostonbek Qurbonsho Ugli Shomurodov, Elmurod Abduqodirovich Egamberdiev

Technical science and innovation

in this study, a method for determining the concentration of lignin, cellulose and hemicellulose in plant materials using Fourier-transform IR spectroscopy of Broussonetia papyrefera was developed and tested. The procedure is based on the use of calibration functions that reflect the dependence of the intensity of analytical absorption lines on the concentration of lignin (1512 cm-1) and cellulose (1450 cm-1) in standard samples; indirect correlation was used for hemicellulose. The model samples were ternary mixtures composed of lignin, bacterial cellulose and hemicellulose in different proportions. The proposed method was tested on a wide range of plant biomass samples.