Civil and Environmental Engineering Commons^™

Robb Garden Building: Revit Up, Gimelle Jacala, Colin Strong, Jason Wu

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Community Resource Center, Jackie Koyama, Daryll Mendoza, Kourtnie Sicam

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Operation Bim: Robb Garden Building Project, Michael White, Daniel Seif, Suman Bhardwaj

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Rheological Properties Considering The Effect Of Aggregates On Concrete Slump Flow, Tae Yong Shin, Jae Hong Kim, Seong Ho Han

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Rheology of concrete allows us to understand the flow behavior of concrete and further extend the quantitative evaluation of its construction performance. The use of a concrete rheometer is promising for the purpose but sometimes limited high associated cost and procedure complexity. This study proposes a simulation-based model that correlates the slump flow test results to a concrete's rheological properties, allowing quantitative evaluation through this simple method. The proposed model is based on single-fluid simulation using the volume-of-fluid method, with an extension to accommodate the partial segregation of coarse aggregates. Either the channel flow or the L-shaped panel filling of …

Case Study: Mitigating Schedule Impacts From Oshpd Regulations On Medical Equipment, Peter K. Lee

Construction Management

The vast majority of healthcare construction projects in the state of California work with OSHPD—Office of Statewide Health Planning and Development—to meet California’s Hospital Seismic Safety Law. While meeting the state’s Hospital Seismic Safety Law is important and even critical, working with OSHPD’s stringent regulations does imply additional concerns to be addressed by the project team. One concern regards the approval of bigger medical equipment and its impact on the overall construction schedule. This paper examines the factors that contribute to delays in the construction schedule, responsible parties for the delay, and responsibilities of each involved party. Based on an …

Bridge Build, Andrew Little

Student Scholarship

Bridge build design that includes not only a building process, but a research paper to make the best build possible as well.

How We Compute N Matters To Estimates Of Mixing In Stratified Flows, Robert S. Arthur, Subhas K. Venayagamoorthy, Jeffrey R. Koseff, Oliver B. Fringer

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Most commonly used models for turbulent mixing in the ocean rely on a background stratification against which turbulence must work to stir the fluid. While this background stratification is typically well defined in idealized numerical models, it is more difficult to capture in observations. Here, a potential discrepancy in ocean mixing estimates due to the chosen calculation of the background stratification is explored using direct numerical simulation data of breaking internal waves on slopes. Two different methods for computing the buoyancy frequency, one based on a three-dimensionally sorted density field (often used in numerical models) and the other based on …

On The Propagation Of Gravity Currents Over And Through A Submerged Array Of Circular Cylinders, Jian Zhou, Claudia Cenedese, Tim Williams, Megan Ball, Subhas K. Venayagamoorthy, Roger I. Nokes

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The propagation of full-depth lock-exchange bottom gravity currents past a submerged array of circular cylinders is investigated using laboratory experiments and large eddy simulations. Firstly, to investigate the front velocity of gravity currents across the whole range of array density (i.e. the volume fraction of solids), the array is densified from a flatbed towards a solid slab under a particular submergence ratio, where is the flow depth and is the array height. The time-averaged front velocity in the slumping phase of the gravity current is found to first decrease and then increase with increasing. Next, a new geometrical framework consisting …

Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang

Conference papers

The support by central government of national Building Information Modelling (BIM) programmes is common throughout the developed world today. To further understand how the different international governments have supported their BIM programmes the BIM Innovation Capability Programme (BICP) research team in Ireland recently completed a comprehensive Global BIM Study to help inform the National BIM Council (NBC) of Ireland in developing a Roadmap to Digital Transition for Ireland’s Construction Sector. This paper details the findings of a more concentrated investigation on a selection of jurisdictions on how particular international BIM programmes are orgainsed, managed and the level of governmental support …

Ireland’S Bim Macro Adoption Study: Establishing Ireland’S Bim Maturity, Barry Mcauley, Alan Hore, Roger West, Mohamad Kassem, Shiyao Kuang

Conference papers

Since 2016 the BIM Innovation Capability Programme (BICP) has captured the capability of the Irish Construction Industry’s and the Higher Education Institutes’ (HEIs) response to the increased requirement for BIM on Irish construction and engineering projects. One of the primary responsibilities of the BICP research team is to collate data to assist the National BIM Council of Ireland in the formulation of a National BIM Roadmap. To assist the Council with this task the BICP research team applied five macro BIM maturity conceptual models to assess Ireland’s BIM maturity. The results from the models were further utilised to develop a …

What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan

Conference papers

There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …

A Modeling Enterprise For Chemistry Of Indoor Environments (Cie), G. C. Morrison, N. Carslaw, M. S. Waring

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

No abstract provided.

Bs News November/December

Building Services Engineering

No abstract provided.

Establishing The Key Pillars Of Innovation Required To Execute A Successful Bim Strategy Within A Construction Sme In Ireland, Barry Mcauley, Patrick Carroll

Conference papers

The recent resurgence of the Irish Construction Industry comes at a time of global transition towards an information revolution, with technology now playing a vital role within our post-recessionary society. BIM is now seen as a core technology at the forefront of this transformational change which can present Construction SMEs with opportunities to new financial ventures. If any SME organisation is to be successful with BIM adoption then innovation must be the starting point. The aim of this paper is to establish the enabling factors required for innovating a BIM strategy within a SME Construction Organisation. The methodology involved a …

Dermal Uptake Of Benzophenone-3 From Clothing, Glenn C. Morrison, Gabriel Bekö, Charles J. Weschler, Tobias Schripp, Tunga Salthammer, Jonathan Hill, Anna Maria Andersson, Jørn Toftum, Geo Clausen, Hanne Frederiksen

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Benzophenone-3 (also known as BP-3 or oxybenzone) is added to sunscreens, plastics, and some coatings to filter UV radiation. The suspected endocrine disruptor BP-3 has been detected in the air and settled dust of homes and is expected to redistribute from its original sources to other indoor compartments, including clothing. Given its physical and chemical properties, we hypothesized that dermal uptake from clothing could contribute to the body burden of this compound. First, cotton shirts were exposed to air at an elevated concentration of BP-3 for 32 days; the final air concentration was 4.4 μg/m3. Next, three participants wore the …

Understanding Sanitation Preferences: An Exploratory Study In The Sirohi District Of Rajasthan, Karen Mac

Independent Study Project (ISP) Collection

Of all the countries in the world, India has the highest number of people practicing open defecation, causing adverse health outcomes from the unconfined spread of faecal matter. The Government of India is ambitiously aiming to end this practice through the construction of 12 million toilets by 2019, but historically, many toilets across India have gone unused. This study focused on understanding: (1) the reasons why people continue to openly defecate despite having toilets and (2) the requirements of a toilet that rural households would be willing to use. Along with 36 observations of household toilets, semi-structured group (n=8) and …

The Bridge Newsletter Winter 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Hands-on experience in concrete materials research and construction practices
-Making ACML progress
-Taos bridge project

The Professional Constructor, Full Issue, Volume 42, Number 02

The Professional Constructor

No abstract provided.

Measuring Rheological Properties Of Cement Pastes: Most Common Techniques, Procedures And Challenges, Dimitri Feys, Rolands Cepuritis, Stefan Jacobsen, Karel Lesage, Egor Secrieru, Ammar Yahia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Science of Rheology is Increasingly Used to Describe the Properties of Fresh Cement Paste. Compared to Standard Workability Tests, Rheological Properties Allow for More Fundamental Investigation, More Precise Phenomenological Description of Flow Properties and Serve as Input for Numerical Simulations. Standard Commercially Available Rheometers Are Typically Used to Perform Those Measurements. However, the Results of the Measurement Depend on the Geometry, Testing Procedure and a Number of Potential Artefacts. This Technical Letter Describes the Most Common Techniques and Procedures Used to Assess the Rheological Properties of Cement Paste, as Well as Challenges during Measurements and Actions to Counter These …

Design And Planned Obsolescence. Theories And Approaches For Designing Enabling Technologies, Matteo Zallio, Damon Berry

Articles

We are currently living in a decade where smart objects and Internet of Things (IoT)-based devices are becoming part of daily life in different contexts. This research seeks to investigate and verify, by using a formal literature review methodology, the most visible aspects of technological development, within the Industry 4.0 and IoT scenario, in relation to the theories of the so called “Planned Obsolescence”.

This study covers a defined number of works on Design theories and practices on how to face the issue of built-in obsolescence of devices in the era of the Connected Devices. The majority of the works …

Impact Of Surface Ozone Interactions On Indoor Air Chemistry: A Modeling Study, M. Kruza, A. C. Lewis, G. C. Morrison, N. Carslaw

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

An INdoor air Detailed Chemical Model was developed to investigate the impact of ozone reactions with indoor surfaces (including occupants), on indoor air chemistry in simulated apartments subject to ambient air pollution. The results are consistent with experimental studies showing that approximately 80% of ozone indoors is lost through deposition to surfaces. The human body removes ozone most effectively from indoor air per square meter of surface, but the most significant surfaces for C6-C10 aldehyde formation are soft furniture and painted walls owing to their large internal surfaces. Mixing ratios of between 8 and 11 ppb of C6-C10 aldehydes are …

Bs News September/October

Building Services Engineering

No abstract provided.

Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe

Conference papers

This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …

Impacts Of Rail Transit Investments On Demographics And Land Use: 1990-2010, Aubrey Trinidad

All Theses

This paper studies the changes in land use and population characteristics around station areas following the building of rail transit stations in 14 major cities in the United States from 1990 to 2010. It answers the question: how have investments in US rail transit made since the 1990s affected land use and demographics? It also looks at the specific effects of investments on population density, race, and ethnicity, means of transportation, median housing value, median household income, vehicle access share, occupations, and land use represented by the share of multifamily versus single-family housing. Using block group level US census data …

Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

The Irish Government has requested that Enterprise Ireland, an organisation responsible for the development and growth of Irish enterprises in world markets to actively promote the use of BIM in Ireland. This promotion has taken the form of an opportunity for Enterprise Ireland clients to apply for a grant under their BIM Enable and BIM Implementation schemes and also through their funding of the BIM Innovation Capability Programme (BICP) of Ireland. The BICP is a two-year project (2016-2018) which seeks to capture the capability of the Irish Construction Industry and the Higher Education Institutes to respond to the increased requirement …

The Prevalence Of Six Sigma Trends In The Construction Industry In Pakistan, Muhammad M. Hassan

Masters Theses & Specialist Projects

Economic development in any country or area depends heavily on the performance of the construction industry. This is because the subsequent development of infrastructure increases economic activity, living standards, direct foreign investments, and business opportunities. The construction industry in Pakistan also plays a significant role in its economic activity, and the government’s focus towards increasing infrastructure development provides the construction industry with growth prospects. It is observed that quality management practices in the Pakistan construction industry are highly inadequate to enhance quality. The construction industry there is highly challenged with inadequate delays in projects and project quality. The need for …

Bs News July/August

Building Services Engineering

No abstract provided.

Implementing Subspace Identification On Shake Table Model, Zoe T. Cooperband

Architectural Engineering

Stochastic Subspace Identification is a field of applied mathematics that takes collected experimental time-history data and gives out information about the system that produced the data. SSI is typically used in control analysis but here we apply the methods to the modal analysis of structures. This senior project didn’t involve theory - instead much of the work was in research behind how Subspace Identification works, implementing the algorithm in MATLAB, and applying the program to shake table data to validate the program. In other words, building the framework to make SSI a usable tool and practical learning experience for other …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …