Thermodynamics Commons^™

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Predicting Simulation Times For Multiphase Thermal-Hydraulic Models, Andrew Yule, Andrew Taylor

SMU Data Science Review

Addressing the challenge of computationally intensive OLGA

simulations in the oil and gas industry, a machine learning framework is

developed for accurate runtime prediction. A specialized feature extraction

pipeline identifies key parameters—such as simulation time, time step,

number of branches, and section count—from OLGA input files that serve as

high-impact predictors. Multiple predictive models, including regression,

tree-based ensembles, and neural networks, are implemented to validate

accuracy and robustness. Results reveal that prioritizing simulations based on

predicted runtimes optimizes licensing resources and reduces operational

costs, making real-time scheduling more efficient. This research demonstrates

the effectiveness of data-driven runtime prediction in enhancing …

Equilibration And Transport Of Binary Mixtures On Planar And Porous Nanomaterials, Andrew Torres

Electronic Theses and Dissertations

We present results of a Kinetic Monte Carlo investigation of the adsorption dynamics of binary gas mixtures on planar and porous sorbents, with a focus on identifying and characterizing kinetic processes involved in uptake evolution and how they influence equilibrium conditions. We also investigate varying thermodynamic simulation parameters such as interactions, alkane lengths, partial pressures and pore configurations to determine how they impact these kinetic processes as well as equilibrium properties. This study matters both for better understanding how kinetics and equilibrium are connected and for improving practical techniques in separation applications. For planar surfaces, weak species overshoot kinetic processes …

Theoretical And Experimental Investigation Of Liquid-Liquid Phase Separation: Characterizing Elastin-Like-Polypeptides, Adam D. Quintana

Chemical and Biological Engineering ETDs

This dissertation develops and validates a semi-empirical Flory–Huggins-based interaction model, combined with Cahn–Hilliard simulations, for predicting multi-component liquid–liquid phase separation (LLPS) in elastin-like polypeptide (ELP) systems. Equilibrium droplet compositions, measured using a PDMS-based microfluidic device, enabled direct parameterization of interaction coefficients. The model was applied to generate phase diagrams and assess composition dependence in ternary mixtures. Cahn–Hilliard simulations were conducted to explore potential phase morphologies under different interfacial conditions. Multi-component Lattice Boltzmann simulations were implemented to model droplet morphology evolution under varying interfacial and diffusive parameters, reproducing experimentally relevant morphologies. A three-phase wetting study revealed conditions for selective wetting and …

Experimentally Driven Numerical Model Of Carbon/Polyaniline-Based Glucose Monitoring Sensors: An Evaluation Using A New Figure Of Merit, Ziad Khalifa, Kyrillos Selim, Amira Ali, Sameh Abdellatif

Chemical Engineering

This study presents an experimentally driven numerical model for evaluating carbon/polyaniline (PANI)- based glucose monitoring sensors (GMSs), focusing on innovative configurations using graphene-PANI and carbon nanotube (CNT)-PANI composites. We performed a thorough analysis of the morphological, electrophysical, and electrical properties of these materials, ultimately leading to the extraction of key electrical parameters for integration into a finite element model (FEM). This model simulates the entire sensor, enabling the estimation of critical performance metrics such as sensitivity, limit of detection (LOD), linearity, and power consumption. Our findings demonstrate that the CNT-PANI configuration significantly outperforms the laser-induced graphene (LIG)-PANI electrode, achieving a …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Comprehensive Review Of Sensible Thermal Storage Systems For Cooking Applications, Anna K. Shariishoy

Tanzania Journal of Engineering and Technology (TJET)

This paper reviewed the sensible thermal storage systems specifically designed for cooking applications. The review focuses on the characteristics of storage materials, their practical applications, and the overall performance of the systems. The review consolidated an array of experimental and numerical research published across various sources such as journals, conferences, books, online resources, and professional reports. A systematic review is used to reach the conclusion of this paper. Significant findings from this study include the wide range of storage capacities attained from small-scale systems that can store ~1–5 MJ of energy for a single meal to bigger systems that can …

Predicting The Influence Of Aggregate Size And Distribution On Cementitious Concrete Properties: A Review, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

Cement concrete has been in use for centuries as one of the primary construction materials. Its demand in the construction industry is expected to continue for several centuries before the full development of alternative products. However, one of the main areas of research interest is understanding how its constituents can be tailored to make its properties predictable to reduce risks associated with structural failures, reconstruction and reduced durability. These hindrances associated with cementitious concrete result from several attributes, including constituent material characteristics, mixing ratios and workmanship. Understanding the predictability of cement concrete properties requires computer modelling tools to provide reliable …

Root Cause Analysis Of Performance Degradation For An Xyz Thermal Power Plant In Tanzania, Simon I. Marandu

Tanzania Journal of Engineering and Technology (TJET)

Thermal power plants in Tanzania have been experiencing performance degradation, typically arising from component and subsystem failures, which contribute to power system instability and unreliability. This paper presents a case study of the root causes of performance degradation of an XYZ thermal power plant. The study was conducted by reviewing plant documentations, including maintenance and operational data logbooks, and by standardising the approach through the adoption of ISO 14224:2016 for maintenance and reliability data exchange. Data evaluation was carried out using principal component analysis and scree plot analytical techniques to enhance the depth and accuracy of root cause identification. Additionally, …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Using Gaussian Process Regression To Learn Thermodynamic Equations Of State With Uncertainty Quantification, Austen T. Lee

Chemical Engineering Undergraduate Honors Theses

This study investigates the use of derivative-informed Gaussian Process (GP) models to estimate thermodynamic behavior across temperature and density by building a Helmholtz-based equation of state. Argon, a stable monatomic gas, was chosen as a case study within the vapor region. The GP model was trained using values of experimentally measurable properties found by taking first and second derivatives of the original potential function. Results show that while the GP model offered uncertainty quantification and informed thermodynamic behavior, it predicted values that deviated from the ground truth depending on the property. The model exhibited high confidence in regions with substantial …

Ultrafast Laser Surface Structuring For Wettability Control On Copper, Akshay Arvind Nagvenkar

All Theses

Wettability is a crucial surface property influencing various phenomena, including heat transfer, cell adhesion, and corrosion. Engineering devices can achieve superior performance by precisely manipulating surface wettability. As a result, extensive research has focused on developing surfaces that exhibit either extreme water attraction (superhydrophilic) or strong water repellency (superhydrophobic). Tailoring surface wettability paves the way for numerous applications, such as drag reduction in marine vessels, controlled drug delivery, efficient water collection, advanced liquid transport systems, oil-water separation, anti-corrosion coatings, friction reduction, and self-cleaning materials. Ultrafast laser surface structuring is a promising approach for engineering multifunctional surfaces, effectively modifying material properties …

Cellulose Recovery From Waste Denim Fabrics Through Indigo Vat Dye Reduction And Spandex Dissolution, Tito N. Venance

Tanzania Journal of Engineering and Technology (TJET)

This study addresses environmental conservation by tackling end-of-life management for post-consumer denim garments through the recycling of cotton fibres from waste denim. The purification process involved dithionite reduction of vat dyes in the presence of an alkali followed by selective dissolution of spandex using N,N-dimethylformamide (DMF). Optimal conditions for dye removal were determined at 90°C for 120 minutes with sodium hydroxide at 25 g/L, sodium dithionite at 6 g/L and PVP at 4.5 g/L, while spandex extraction was achieved using a 5% DMF solution at 70°C for 4 hours. Ultraviolet (UV)-vis spectrophotometric analysis indicated a significant increase in whiteness (DL*). …

Assessment Of Factors Contributing On Early Rotting Of Chromated Copper Arsenate Treated Utility Power Distribution Wood Poles In Tanzania, Innocent J. Macha

Tanzania Journal of Engineering and Technology (TJET)

The study aimed to assess the factors contributing to the premature decay of Chromated Copper Arsenate (CCA) treated utility power distribution wooden poles in Tanzania. Deteriorated poles samples from various regions in Tanzania were analyzed using handheld X-ray spectrometry to quantify the retention of CCA preservative chemicals. The ages of these poles were estimated based on annual growth rings. The findings indicated that premature failure of CCA treated wooden poles is attributed to an imbalance in the chemical composition of the preservative solution. The study found that CuO retention in most samples ranged between 10-18 kg/m3, significant lower that the …

Metabolite Analysis To Understand Factors Limiting Microbial Fermentation At High Substrate Concentrations, Bishal D. Sharma

Dartmouth College Ph.D Dissertations

Clostridium thermocellum, a thermophilic anaerobic bacterium, holds promise as a biocatalyst for conversion of lignocellulosic biomass into biofuels. This microbe has been subjected to various metabolic engineering strategies, including the deletion of genes encoding secondary fermentation products such as H₂, formate, acetate, and lactate, as well as the expression of heterologous genes to redirect carbon flux toward ethanol production. Despite these efforts, achieving economically viable ethanol titers remains a challenge. We hypothesized that studying how intracellular metabolite concentrations change as fermentation stops could reveal metabolic bottlenecks or regulatory mechanisms limiting ethanol production at high titers. However, metabolomics studies at …

The Effects Of Snow Cover On The Dynamic Pressure Of Nuclear Detonation Blast Waves, Adam Card, Andrew W. Decker

Faculty Publications

Blast pressure is the primary military targeting metric for nuclear weapons. Any local conditions that affect blast pressure have the potential for altering nuclear plans, both from defensive and offensive standpoints. Understanding the impact of snow to the blast wave, therefore, provides a benefit both to military planners and to warfighters on the ground, for any operation occurring in arctic environments. No existing data provides a quantitative description of how snow on the ground affects a nuclear detonation blast wave passing over it. Similar blast waves passing over dust have experimentally proven to enhance blast pressure in a localized region.1 …

Statistical Investigation Of Gypsum Crystallization Kinetics, Azmain A. Akash

LSU Master's Theses

Gypsum, a naturally occurring mineral salt, is frequently encountered in industrial processes such as seawater desalination and power plant cooling. Over the years, significant effort has been devoted to controlling the crystallization of gypsum through various chemical approaches, including acidification, chelating agents, and antiscalant polymers. Nevertheless, the cost associated with chemical treatments may be reduced by incorporating physical operational strategies to complement chemical methods in regulating gypsum crystallization.

This study systematically examines the comparative roles of chemical and physical entropy in the gypsum crystallization process to elucidate their respective influences on gypsum growth kinetics. Chemical entropy is manipulated by adjusting …

Metathesis Or Isomerization: Counteranion Directed Reactivity Of Grubbs I, Paul D. Miller, Joe B. Calkins, Craig A. Bayse, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Catalytic isomerization of alkenes has garnered interest for many years, but there are remaining challenges when it comes to thermodynamic selectivity and uncontrolled isomerization. Nonbiased substrates, be it sterically or thermodynamically, remain challenging for many catalysts, with a few examples available in the more modern literature. Herein, we present the controlled isomerization of linear alkenes with a cocatalytic mixture of commercially available catalyst and reagents: Grubbs I, tris(pentafluorophenyl)borane, and triethylsilane. DFT calculations indicate that an observed alkylidyne hydride intermediate is in rapid equilibrium with an alkylidene that binds the alkene substrate. This combination results in a pi-acidic metal and a …

Numerical Modelling And Co-Optimization Of Gasoline Fuels For Gasoline Compression Ignition Using Multi Component Approach, Ashwin Karthik Purushothaman

Dissertations, Master's Theses and Master's Reports

Future mobility is expected to rely on a broad spectrum of powertrain technologies, including battery electric vehicles (BEVs), hybrid electric vehicles (HEVs), fuel cell electric vehicles (FCEVs) and traditional internal combustion engine (ICE) vehicles. Despite the shift toward electrification, internal combustion engines are projected to remain a key component of future powertrains, either as the primary power source or as range extenders to generate electricity in hybrid systems. As such, significant research efforts continue to focus on enhancing the efficiency and reducing the emissions of ICEs to meet increasingly stringent regulatory and environmental targets. Gasoline compression ignition (GCI) has been …

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael

Mathematics & Statistics Faculty Publications

The conjugate heat transfer and fluid flow has vast applications in thermal engineering, particularly for cooling in thermal devices, and automobile engines. This study investigates conjugate heat transfer in 2D enclosures, featuring thin solid fins attached to a porous bottom wall. The porous medium is considered isotropic and homogeneous by the Darcy-Forchheimer model, with fluid phases in local thermal equilibrium. The boundary conditions at the porous fluid interface ensure continuity of the velocities, stresses, temperature, and heat flux. The phenomenon is mathematically modelled by obtaining a set of partial differential equations. The finite element method (FEM) is used to perform …

Flipped Classroom Techniques In A Thermodynamics Course In Engineering Technology, Nathan Luetke, Orlando Ayala, Vukica Jovanovic

Engineering Technology Faculty Publications

Teaching undergraduate thermodynamics presents numerous challenges to educators due to its inherently complex and abstract nature. The vast array of applications in engineering requires educators to strike a balance between theoretical principles and practical examples, thereby creating a meaningful and applicable learning experience. This paper presents an approach to teaching an undergraduate thermodynamics course in engineering technology developed over four consecutive semesters blending traditional lecture-based teaching with flipped classroom techniques. The teaching methods used, and modifications made each semester are presented along with student performance.

Membrane Reactor Modeling And Optimization For Hydrogen Production, Ayooluwa Tomiwa Akintola

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an ongoing trend toward cleaner fuels for more environmentally benign forms of energy generation. Recently, hydrogen has been identified as a clean fuel for energy generation. However, the most established, efficient, and widely utilized technique for producing hydrogen remains the steam methane reforming (SMR) in the presence of catalyst. Unlike other fossil fuels, utilizing methane from natural gas in an SMR process to produce hydrogen emits less, but yet a notable sum of carbon dioxide. Furthermore, the endothermic nature of SMR reactions imply that there is a high energy requirement to obtain a substantial amount of hydrogen …

Modeling And Simulation Of A Process For Upcycling Of Low-Density Polyethylene Plastic Waste To Ethylene, Xiaoyan Wang

Graduate Theses, Dissertations, and Problem Reports (ETD)

Ethylene is one of the most widely produced petrochemicals, with an estimated global output of 180 million metric tons in 2022. Approximately 82 million metric tons of ethylene are used annually for plastic production, primarily for polyethylene (PE), as well as polypropylene (PP) and polyvinyl chloride (PVC). The CO₂ emissions associated with PE production were approximately 14 million metric tons in 2022. Globally, an estimated 70 million metric tons of PE are produced and consumed each year, with the majority (~79%) ending up in landfills or the environment.

This project proposes a novel process in which waste low-density polyethylene (LDPE) …

Hybrid Rans-Les Analysis Of Turbulent Flame Under Near Blow-Off Condition In A Multi-Stage Swirl Combustor, Brandon O'Brien

College of Graduate Studies: Theses & Dissertations

Advances in computational resources are making computational fluid dynamics (CFD) increasingly accessible for a variety of engineering applications. However, certain complex problems, such as simulating detailed flame kinetics, remain computationally prohibitive for many users. Developing cost-effective methods to simulate these challenges would greatly benefit applications involving flame dynamics, such as turbine engines or industrial burners. This study investigates the effect of main stage swirler intensity on near lean blow-off characteristics in a multi-staged swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model …