Thermodynamics Commons^™

Techno-Economic Analysis Of Implementing Carbon Capture And Storage (Ccs) At The Punagaya 2×100 Mw Coal Power Plant, Ricky Andreas Kristianto Siringoringo, Rahma Muthia, Widodo Wahyu Purwanto

Journal of Materials Exploration and Findings

The increase in greenhouse gases due to the combustion of fossil fuels is one of the major drivers of global warming and consequently drives the development of low-carbon technologies such as Carbon Capture and Storage (CCS). The aim of this study is to evaluate the technical and economical feasibility of the implementation of CCS technology in the Punagaya Subcritical Coal-Fired Power Plant (CFPP) 2×100 MW as a part of the energy transition strategy towards Net Zero Emissions (NZE) 2060. The simulation was carried out using Aspen HYSYS software, including coal combustion, CO₂ capture through MDEA-PZ solvent, dehydration, transportation, and storage …

On The Use Of Lorawan For Smart Fishing Applications In The Blue Economy Sector, Eva Shayo

Tanzania Journal of Engineering and Technology (TJET)

The growth of digital technology is expected to transform small-scale fishery sectors, where a need for robust, low-cost, long-range communication networks becomes critical. There exist several technologies that are used in the fishery sector but they are never affordable to small scale fisheries. This study evaluates the feasibility of using low cost Long Range Wide Area Network (LoRaWAN) technology specifically tailored for smart fishing environments to small scale fishery sector. Using simulation, we assess the performance of the key performance metrics including probability of success and energy efficiency under varying device densities and time. During evaluation, we considered end devices …

Physicochemical Properties And Chemical Compositions Of Cashew Nut Shell Liquid Extracted With Carbon Dioxide–Expanded Hexane, Neema Msuya, Joseph Yn Philip, Frank Jacob, Kando K. Janga

Tanzania Journal of Engineering and Technology (TJET)

Cashew nut shell liquid (CNSL) is a mixture of phenolic compounds that can effectively replace commercially available phenols in various applications. This study investigated the physicochemical properties and chemical composition of CNSL extracted using CO₂–expanded hexane (CXH) and compared to the traditional Soxhlet extraction method. Steamed cashew nut shells (sCNS) were used in both cases.  The CXH was carried under varying CO₂-mole fractions (0.468-0.892) and temperatures (20-36 °C) whereas Soxhlet extraction was performed at atmospheric pressure and hexane boiling point. Response Surface Methodology (RSM) with Central Composite Face-Centred Design (CCFD) was employed to evaluate the effect …

Improving The Reliability And Performance Of A Supersonic Indraft Tube Wind Tunnel, Christian J. Kaml

Master's Theses

Access to supersonic testing is increasing in demand, and wind tunnels remain one of the safest and most cost-effective methods for gathering high-speed flow data. Despite being more economical than alternative options, supersonic wind tunnel facilities often require substantial investment to construct, operate, and maintain.

The novel indraft tube tunnel architecture was conceived as a high-speed flow testbed that incorporates features of both Ludwieg tubes and indraft wind tunnels to maintain costs low enough to be accessible even to small universities. This design was first developed and tested in 2018 at California Polytechnic State University, featuring a cost per test …

A Comparative Study Of Tin Electrorefining In Molten Licl–Kcl–Cacl₂: Experimental Two-Electrode Current Control And Theoretical Three-Electrode Potential Control, Bryant Johnson, George Ankrah, Ander Fuller, Devin Rappleye

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

Molten salt electrorefining is a mature technology for metal recovery, yet conventional current‑controlled, two‑electrode operation provides limited electrochemical selectivity and restricted insight into electrode‑specific behavior. In this work, a simplified model is developed to compare current‑controlled two‑electrode electrorefining data with a potential‑controlled three‑electrode electrorefining simulation using tin in molten LiCl–KCl–CaCl₂ as a surrogate for plutonium processing. The model examines anodic and cathodic limitations under fixed‑potential operation and evaluates implications for selectivity, efficiency, and runtime relative to experimentally demonstrated two‑electrode performance. Results indicate that independent potential control enables operation closer to thermodynamic selectivity limits, with the potential to suppress impurity oxidation …

Computational Study Of Rotating Detonation Combustors, Aditya Balasubramaniam

Mechanical and Aerospace Engineering Theses

Rotating detonation combustors (RDCs) are pressure-gain combustion devices that sustain one or more continuously rotating detonation waves, offering potential thermodynamic and performance advantages over conventional deflagration-based systems. Their behavior depends strongly on combustor geometry and operating conditions. Understanding these effects is therefore essential for the design and optimization of practical RDCs. Accordingly, this thesis numerically investigates annular RDCs with two primary objectives: (1) to evaluate the effects of propellant mass flux and (2) to assess the influence of annular width on detonation-wave dynamics and combustor performance.

A finite-volume framework is used to solve the compressible reactive Euler equations with hydrogen–air …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Predicting Simulation Times For Multiphase Thermal-Hydraulic Models, Andrew Yule, Andrew Taylor

SMU Data Science Review

Addressing the challenge of computationally intensive OLGA

simulations in the oil and gas industry, a machine learning framework is

developed for accurate runtime prediction. A specialized feature extraction

pipeline identifies key parameters—such as simulation time, time step,

number of branches, and section count—from OLGA input files that serve as

high-impact predictors. Multiple predictive models, including regression,

tree-based ensembles, and neural networks, are implemented to validate

accuracy and robustness. Results reveal that prioritizing simulations based on

predicted runtimes optimizes licensing resources and reduces operational

costs, making real-time scheduling more efficient. This research demonstrates

the effectiveness of data-driven runtime prediction in enhancing …

Equilibration And Transport Of Binary Mixtures On Planar And Porous Nanomaterials, Andrew Torres

Electronic Theses and Dissertations

We present results of a Kinetic Monte Carlo investigation of the adsorption dynamics of binary gas mixtures on planar and porous sorbents, with a focus on identifying and characterizing kinetic processes involved in uptake evolution and how they influence equilibrium conditions. We also investigate varying thermodynamic simulation parameters such as interactions, alkane lengths, partial pressures and pore configurations to determine how they impact these kinetic processes as well as equilibrium properties. This study matters both for better understanding how kinetics and equilibrium are connected and for improving practical techniques in separation applications. For planar surfaces, weak species overshoot kinetic processes …

Theoretical And Experimental Investigation Of Liquid-Liquid Phase Separation: Characterizing Elastin-Like-Polypeptides, Adam D. Quintana

Chemical and Biological Engineering ETDs

This dissertation develops and validates a semi-empirical Flory–Huggins-based interaction model, combined with Cahn–Hilliard simulations, for predicting multi-component liquid–liquid phase separation (LLPS) in elastin-like polypeptide (ELP) systems. Equilibrium droplet compositions, measured using a PDMS-based microfluidic device, enabled direct parameterization of interaction coefficients. The model was applied to generate phase diagrams and assess composition dependence in ternary mixtures. Cahn–Hilliard simulations were conducted to explore potential phase morphologies under different interfacial conditions. Multi-component Lattice Boltzmann simulations were implemented to model droplet morphology evolution under varying interfacial and diffusive parameters, reproducing experimentally relevant morphologies. A three-phase wetting study revealed conditions for selective wetting and …

Zn–Assisted Synthesis Of M (Mn/Fe/Co/Ni)-N-C Catalysts For Multifunctional Electrochemical Activity, Kemila A. Chaudhary

Electronic Theses & Dissertations

The design and development of atomically dispersed M-N-C catalysts (metal (M) supported on an nitrogen-carbon (NC) matrix with high multifunctional electrocatalytic performance is desirable but proved to be very challenging. Herein, we synthesized M-N-C catalysts (M = Fe, Co, Mn, and Ni) using Zn-assisted high temperature treatment and characterized using various techniques. The prepared catalysts were tested for their electrocatalytic performance towards oxygen and hydrogen evolution reaction (OER and HER) as well as oxygen reduction reaction (ORR) in alkaline media. The results indicated that Mn-N-C catalyst showed higher performance towards both the ORR (E_1/2 = 0.90 V) and …

Using Gaussian Process Regression To Learn Thermodynamic Equations Of State With Uncertainty Quantification, Austen T. Lee

Chemical Engineering Undergraduate Honors Theses

This study investigates the use of derivative-informed Gaussian Process (GP) models to estimate thermodynamic behavior across temperature and density by building a Helmholtz-based equation of state. Argon, a stable monatomic gas, was chosen as a case study within the vapor region. The GP model was trained using values of experimentally measurable properties found by taking first and second derivatives of the original potential function. Results show that while the GP model offered uncertainty quantification and informed thermodynamic behavior, it predicted values that deviated from the ground truth depending on the property. The model exhibited high confidence in regions with substantial …

The Effects Of Snow Cover On The Dynamic Pressure Of Nuclear Detonation Blast Waves, Adam Card, Andrew W. Decker

Faculty Publications

Blast pressure is the primary military targeting metric for nuclear weapons. Any local conditions that affect blast pressure have the potential for altering nuclear plans, both from defensive and offensive standpoints. Understanding the impact of snow to the blast wave, therefore, provides a benefit both to military planners and to warfighters on the ground, for any operation occurring in arctic environments. No existing data provides a quantitative description of how snow on the ground affects a nuclear detonation blast wave passing over it. Similar blast waves passing over dust have experimentally proven to enhance blast pressure in a localized region.1 …

Metathesis Or Isomerization: Counteranion Directed Reactivity Of Grubbs I, Paul D. Miller, Joe B. Calkins, Craig A. Bayse, Trandon A. Bender

Chemistry & Biochemistry Faculty Publications

Catalytic isomerization of alkenes has garnered interest for many years, but there are remaining challenges when it comes to thermodynamic selectivity and uncontrolled isomerization. Nonbiased substrates, be it sterically or thermodynamically, remain challenging for many catalysts, with a few examples available in the more modern literature. Herein, we present the controlled isomerization of linear alkenes with a cocatalytic mixture of commercially available catalyst and reagents: Grubbs I, tris(pentafluorophenyl)borane, and triethylsilane. DFT calculations indicate that an observed alkylidyne hydride intermediate is in rapid equilibrium with an alkylidene that binds the alkene substrate. This combination results in a pi-acidic metal and a …

Investigations Of Conjugate Heat Transfer And Fluid Flow In Partitioned Porous Cavity Using Darcy-Forchheimer Model: Finite Element-Based Computations, Nasir Yasin, Shafee Ahmad, Muhammad Umair, Zahir Shah, Narcisa Vrinceanu, Ghadah Alhawael

Mathematics & Statistics Faculty Publications

The conjugate heat transfer and fluid flow has vast applications in thermal engineering, particularly for cooling in thermal devices, and automobile engines. This study investigates conjugate heat transfer in 2D enclosures, featuring thin solid fins attached to a porous bottom wall. The porous medium is considered isotropic and homogeneous by the Darcy-Forchheimer model, with fluid phases in local thermal equilibrium. The boundary conditions at the porous fluid interface ensure continuity of the velocities, stresses, temperature, and heat flux. The phenomenon is mathematically modelled by obtaining a set of partial differential equations. The finite element method (FEM) is used to perform …

(R2090) Analysis Of Heat And Mass Transfer In Mhd Boundary Layer Flow Of Chemically Reacting Fluid, Dharati Sheth, Manisha Patel, Dilip Joshi

Applications and Applied Mathematics: An International Journal (AAM)

Analysis of the effects of heat and mass transfer on the chemically responding boundary layer flow of a Casson fluid across a porous stretched sheet in the existence of a crosswise magnetic field is the aim of the existing work. The partial differential equations that control the current flow problems can be converted into similarity equations by applying the right similarity technique. Our goal is to use the DTM-Pade approximation to analytically solve the derived similarity equations. The transformed similarity equations are a group of nonlinear ordinary differential equations for the present flow problem. The analytical approach of the differential …

Novel Nanocomposite Of Carbonized Chitosan-Zinc Oxide-Magnetite For Adsorption Of Toxic Elements From Aqueous Solutions, Dalia A. Ali Eng, Ganna Gaber Ismail Eng.

Chemical Engineering

Herein, a novel nanocomposite (carbonized chitosan-zinc oxide-magnetite, CCZF) was developed to effectively remove toxic elements in water remediation. Combining the high adsorption capacities of chitosan with the magnetic properties of magnetite and the chemical stability of zinc oxide, the combination of these unique properties makes it an efficient and versatile material that offers a sustainable solution for water purification. The (CCZF) nanocomposite was synthesized through the coprecipitation method and characterized using various techniques, including scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) analysis, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and zeta potential analysis. The results showed …

Efficient Phosphate Removal From Water Using Ductile Cast Iron Waste: A Response Surface Methodology Approach, Mai Hassan Dr., Nada Alkhashab Eng., Ahmed Osman Dr., Dalia A. Ali Eng

Chemical Engineering

Water scarcity is a critical issue worldwide. This study explores a novel method for addressing this issue by using ductile cast iron (DCI) solid waste as an adsorbent for phosphate ions, supporting the circular economy in water remediation. The solid waste was characterized using XRD, XRF, FTIR, and particle size distribution. Wastewater samples of different phosphate ion concentrations are prepared, and the solid waste is used as an adsorbent to adsorb phosphate ions using different adsorbent doses and process time. The removal percentage is attained through spectrophotometer analysis and experimental results are optimized to get the optimum conditions using Design …

A Coarse-Grained Molecular Dynamics Study Of Gas Hydrate Formation And Dissociation, Meisam Adibifard

LSU Doctoral Dissertations

The study of gas hydrates has increased significantly over the last two decades because of their potential application in energy storage, production and transportation, water desalination, refrigeration, gas separation, etc. There is a significant interest in commercially developing natural gas hydrates because the energy content of methane hydrate reservoirs (MHRs) is at least twice that of all conventional fossil fuels combined. Additionally, due to the higher storage capacity of hydrates, it is proposed to sequester CO₂ in the form of CO₂ hydrate, thereby reducing the amount of greenhouse gases. Hence, hydrates offer a dual solution to two of …

Green Synthesis Of Carbonized Chitosan-Fe3o4-Sio2 Nano-Composite For Adsorption Of Heavy Metals From Aqueous Solutions, Dalia A. Ali Eng, Rinad Galal Ali Eng.

Chemical Engineering

Water pollution with heavy metals owing to industrial and agricultural activities have become a critical dilemma to humans, plants as well as the marine environment. Therefore, it is of great importance that the carcinogenic heavy metals present in wastewater to be eliminated through designing treatment technologies that can remove multiple pollutants. A novel green magnetic nano-composite called (Carbonized Chitosan-Fe3O4-SiO2) was synthesized using Co-precipitation method to adsorb a mixture of heavy metal ions included; cobalt (Co2+), nickel (Ni2+) and copper (Cu2+) ions from aqueous solutions. The novelty of this study was the synthesis of a new

nano-composite which was green with …

Improving Static Cold Storage Life Of The Human Heart Before Transplant, Juan Sebastian Rodriguez Paez

Theses and Dissertations

Organ storage and transportation are critical steps for the success of organ transplantation. Static cold storage (SCS) of hearts for heart transplantation (HTx) remains the standard approach. However, SCS may involve damage to the tissue resulting from extended hypothermic preservation, potentially affecting organ viability. More over, the temperature distribution on and within the heart is unknown during heart transplantation. Therefore, there is an interest to study different stages of the heart transplantation process towards determining the 3D temperature distribution on and within the heart. There could be a possibility of having a hypothermic injury in different parts of the heart …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Assessment Of Risk Factors Related To Body Pain Complaints In Tanzania Construction Industry, Fatma K. Mohamed

Tanzania Journal of Engineering and Technology (TJET)

The construction industry is associated with risks that can result in musculoskeletal diseases. Although young male workers who are presumed to be healthy dominate the industry in Tanzania, body pain complaints have been widely reported. The aim of this study is to assess the prevalence and causes of body pains in workers. A cross-sectional study involving 396 workers was conducted. A chi square test was used for testing association of independent categorical variables and binary logistic regression analysis was used to determine predictors for body pain complaints. The results show that all study participants complained of at least one form …

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …

Thermal, Electrical, And Spin Transport: Encompassing Low-Damping Ferromagnets And Antiferromagnetic/Ferromagnetic Heterostructures, Matthew Ryan Natale

Electronic Theses and Dissertations

Continuing technological advancements bring forth escalating challenges in global energy consumption and subsequent power dissipation, posing significant economic and environmental concerns. In response to these difficulties, the fields of thermoelectrics, spintronics, and spincaloritronics emerge as contemporary solutions, each presenting unique advantages. Thermoelectric devices, based on the Seebeck effect, other a passive, carbon-free energy generating solution from waste heat. Although current thermoelectric technology encounters hurdles in achieving optimal efficiencies without intricate designs or complex materials engineering, recently research into low-damping metallic ferromagnetic thin films have provided a new method to enhance spin wave lifetimes, thus contributing to thermoelectric voltage improvements. As …

Utilization Of Caputo Fractional Derivative In Mhd Nanofluid Flow With Soret And Thermal Radiation Effects, Harshad Patel, Gopal Nanda

Applications and Applied Mathematics: An International Journal (AAM)

In existence of heat diffusion and thermal radiation, an analytical equation is found for unsteady MHD flow past an exponentially accelerating vertical plate in optically thick water based nanofluid. The governing equations are made dimensionless by similarity transformation. A definition of Caputo fractional derivative is applied to generalize governing system of partial differential equations. Laplace transform techniques are applied and obtained the analytical solutions of proposed problems. For a physical point of view, numerical results are obtained using MATLAB software and presented via graphs. From the results, it is concluded that magnetic fields tend to reduce velocity. It is also …

Type-B Energetic Processes: Introduction And Invitation To Special Issue Of Energies, James Weifu Lee, Daniel P. Sheehan

Chemistry & Biochemistry Faculty Publications

[First paragraph] Currently, there is substantial scientific evidence for the existence of Type-B energetic processes on Earth, such as the naturally occurring transmembrane-electrostatically localized protons (TELP) thermotrophic properties in life [1]. A number of groundbreaking human-made Type-B energetic processes, including (but not limited to) “asymmetric function-gated isothermal electricity production” [2], “epicatalysis generating a temperature difference between catalysis-asymmetric filaments” [3], “artificially made asymmetric membrane concentration cell” [4,5], “Fu’s experiment on heat–electric conversion using surface electron emission under a static magnetic field” [6], and the “dynamic processes in superconductors indicating Type-B energetic process” [7,8,9] have been invented and/or experimentally demonstrated. The innovative …

Type-B Energetic Processes: Their Identification And Implications, James Weifu Lee

Chemistry & Biochemistry Faculty Publications

We have now identified two thermodynamically distinct types (A and B) of energetic processes naturally occurring on Earth. Type-A energy processes, such as classical heat engines, apparently well follow the second law of thermodynamics; Type-B energy processes, such as the newly discovered thermotrophic function that isothermally utilizes environmental heat energy to perform useful work in driving ATP synthesis, follow the first law of thermodynamics (conservation of mass and energy) but do not have to be constrained by the second law, owing to their special asymmetric functions. Several Type-B energy processes such as asymmetric function-gated isothermal electricity production and epicatalysis have …

Ltspice Modeling For Gan-Git Hemt Including Cryogenic Temperature, Md Maksudul Hossain, Yuqi Wei, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

Highly efficient electrically driven avionics have led to a renewed interest in cryogenic propulsion systems with the goal of reducing carbon emission footprint. Although cryogenic converters promise better efficiency and improved power density, the successful design is incumbent upon the appropriate switching device selection and simulation-based analyses prior to initial prototyping. In this work, a datasheet-driven compact model for a gallium nitride (GaN) Gate Injection Transistor (GIT) has been proposed and implemented in LTspice, a versatile, high performance, and free circuit simulator in order to investigate the merit of the chosen device in a power electronic system.

Gan Hemt And Air Core Magnetics Based Power Converters Evaluations At Cryogenic Temperature, Yuqi Wei, Md Maksudul Hossain, H. Alan Mantooth

Electrical Engineering Faculty Publications and Presentations

Cryogenic power electronics is both advantageous and indispensable in many applications, like deep space probe, military electric vehicle, magnetic resonance imaging etc. Among different semiconductors, the gallium nitride (GaN) high electron mobility transistor (HEMT) is the most promising candidate for cryogenic applications with significant conduction loss and switching loss reductions. Moreover, there is no carrier freeze out effect for the GaN HEMTs, which is applicable in extreme low temperature operating conditions. In this work, the efficiency of GaN HEMTs based power converters with different power levels (from several Watts to several kiloWatts) are evaluated at cryogenic temperature. Three different commercial …