Process Control and Systems Commons^™

Importance Of Morphological Features In Orthoptera Identification, Kamilov Mirzoyan, Alisher Khamroev, Hudayberdiev Mirzaakbar

Chemical Technology, Control and Management

This article analyzes the problems of implementing image recognition methods and algorithms for identifying biological objects. The Orthoptera group was chosen as a biological object. Orthoptera is a taxonomic order of insects that includes grasshoppers, crickets, locusts, and others. Approaches to the formation and identification of features of Orthoptera species and the formation of training and control samples of their samples are proposed. Estimation algorithms (ACE) were chosen as algorithmic support for identifying Orthoptera collections. ACE is based on the principle of partial priority. Approaches to the formation of a training and testing complex based on the data from the …

The Potentials Of Faecal Sludge Treatment Using Local Conditioners In Tanzania: A Review, Doglas Benjamin1

Tanzania Journal of Engineering and Technology (TJET)

Worldwide, every day human beings generate millions of tons of Faecal Sludge (FS), which is rich in water, nutrients, energy, and organic compounds. Yet FS is not being managed in a way that permits us to derive value from its reuse, while at the same time, millions of farmers struggle with depleted soils and lack of water. In most of the developing countries, energy for cooking is mainly derived from cutting of trees, either as wood or charcoal. Resource recovery and reuse from FS can create livelihoods, enhance food security, support green economies, reduce waste and contribute to cost recovery …

Process/Equipment Design Implications For Control System Cybersecurity, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

An emerging challenge for process safety is process control system cybersecurity. An attacker could gain control of the process actuators through the control system or communication policies within control loops and potentially drive the process state to unsafe conditions. Cybersecurity has traditionally been handled as an information technology (IT) problem in the process industries. In the literature for cybersecurity specifically of control systems, there has been work aimed at developing control designs that seek to fight cyberattacks by either giving the system appropriate response mechanisms once attacks are detected or seeking to make the attacks difficult to perform. In this …

A Model-Based Framework For The Smart Manufacturing Of Polymers, Santiago D. Salas Ortiz

LSU Doctoral Dissertations

It is hard to point a daily activity in which polymeric materials or plastics are not involved. The synthesis of polymers occurs by reacting small molecules together to form, under certain conditions, long molecules. In polymer synthesis, it is mandatory to assure uniformity between batches, high-quality of end-products, efficiency, minimum environmental impact, and safety. It remains as a major challenge the establishment of operational conditions capable of achieving all objectives together. In this dissertation, different model-centric strategies are combined, assessed, and tested for two polymerization systems.

The first system is the synthesis of polyacrylamide in aqueous solution using potassium persulfate …

Stability Analysis Of A More General Class Of Systems With Delay-Dependent Coefficients, Chi Jin, Keqin Gu, Islam Boussaada, Silviu-Iulian Niculescu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper presents a systematic method to analyse the stability of systems with single delay in which the coefficient polynomials of the characteristic equation depend on the delay. Such systems often arise in, for example, life science and engineering systems. A method to analyze such systems was presented by Beretta and Kuang in a 2002 paper, but with some very restrictive assumptions. This work extends their results to the general case with the exception of some degenerate cases. It is found that a much richer behavior is possible when the restrictive assumptions are removed. The interval of interest for the …

On Accounting For Equipment-Control Interactions In Economic Model Predictive Control Via Process State Constraints, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Traditionally, chemical processes have been operated at steady-state; however, recent work on economic model predictive control (EMPC) has indicated that some processes may be operated in a more economically-optimal fashion under a time-varying operating policy. It is unclear how time-varying operating policies may impact process equipment, which must be investigated for safety and profit reasons. It has traditionally been considered that constraints on process states can be added to EMPC design to prevent the controller from computing control actions which create problematic operating conditions for process equipment. However, no rigorous investigation has yet been performed to analyze whether, when a …

Operation And Process Control Development For A Pilot-Scale Leaching And Solvent Extraction Circuit Recovering Rare Earth Elements From Coal-Based Sources, Douglas Kweku Addo

Theses and Dissertations--Mining Engineering

The US Department of Energy in 2010 has identified several rare earth elements as critical materials to enable clean technologies. As part of ongoing research in REEs (rare earth elements) recovery from coal sources, the University of Kentucky has designed, developed and is demonstrating a ¼ ton/hour pilot-scale processing plant to produce high-grade REEs from coal sources. Due to the need to control critical variables (e.g. pH, tank level, etc.), process control is required. To ensure adequate process control, a study was conducted on leaching and solvent extraction control to evaluate the potential of achieving low-cost REE recovery in addition …

A Nonlinear Systems Framework For Cyberattack Prevention For Chemical Process Control Systems, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Recent cyberattacks against industrial control systems highlight the criticality of preventing future attacks from disrupting plants economically or, more critically, from impacting plant safety. This work develops a nonlinear systems framework for understanding cyberattack-resilience of process and control designs and indicates through an analysis of three control designs how control laws can be inspected for this property. A chemical process example illustrates that control approaches intended for cyberattack prevention which seem intuitive are not cyberattack-resilient unless they meet the requirements of a nonlinear systems description of this property.

Economic Model Predictive Control Design Via Nonlinear Model Identification, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Increasing pushes toward next-generation/smart manufacturing motivate the development of economic model predictive control (EMPC) designs which can be practically deployed. For EMPC, the constraints, objective function, and accuracy of the state predictions would benefit from process models that describe the process physics. However, obtaining first- principles models of chemical process systems can be time-consuming or challenging such that it is preferable to develop physics-based process models automatically from process operating data. In this work, we take initial steps in this direction by suggesting that because experiments that are used to characterize first-principles models often target specific types of data, an …

State Measurement Spoofing Prevention Through Model Predictive Control Design, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Security of chemical process control systems against cyberattacks is critical due to the potential for injuries and loss of life when chemical process systems fail. A potential means by which process control systems may be attacked is through the manipulation of the measurements received by the controller. One approach for addressing this is to design controllers that make manipulating the measurements received by the controller in any meaningful fashion very difficult, making the controllers a less attractive target for a cyberattack of this type. In this work, we develop a model predictive control (MPC) implementation strategy that incorporates Lyapunov-based stability …

Data-Based Nonlinear Model Identification In Economic Model Predictive Control, Laura Giuliani, Helen Durand

Chemical Engineering and Materials Science Faculty Research Publications

Many chemical/petrochemical processes in industry are not completely modeled from a first-principles perspective because of the complexity of the underlying physico-chemical phenomena and the cost of obtaining more accurate, physically relevant models. System identification methods have been utilized successfully for developing empirical, though not necessarily physical, models for advanced model-based control designs such as model predictive control (MPC) for decades. However, a fairly recent development in MPC is economic model predictive control (EMPC), which is an MPC formulated with an economics-based objective function that may operate a process in a dynamic (i.e., off steady-state) fashion, in which case the details …

Some Insights Into The Migration Of Double Imaginary Roots Under Small Deviation Of Two Parameters, Dina Alina Irofti, Keqin Gu, Islam Boussaada, Silviu-Iulian Niculescu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper studies the migration of double imaginary roots of the systems’ characteristic equation when two parameters are subjected to small deviations. The proposed approach covers a wide range of models. Under the least degeneracy assumptions, we found that the local stability crossing curve has a cusp at the point that corresponds to the double root, and it divides the neighborhood of this point into an S-sector and a G-sector. When the parameters move into the G-sector, one of the roots moves to the right halfplane, and the other moves to the left half-plane. When the parameters move into the …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters tau_i, i = 1, 2, . . . ,K. The characteristic quasipolynomial of such an equation is a multilinear function of exp(-tau_i s). It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delayper- scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters τi, i = 1, 2, . . . , K. The characteristic quasipolynomial of such an equation is a multilinear function of e−τis. It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delay-per-scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence between …

Process Control Laboratory Skid Refurbishment, Danny Crowder

Williams Honors College, Honors Research Projects

This project evaluates a salvaged process control skid for potential refurbishment and educational re-use. In-lab work evaluated the existing skid. Several process control elements have been recommended for replacement, including the process tank (due to corrosion), the pressure transmitter (operability/corrosion), the flow meters (mechanical) and the control system (age). The control valves, temperature elements and transmitters, pump, holding tanks, and the electrical heat exchanger should be salvaged. An I/P converter and pressure relief valve should be added to the pneumatic feed. Enclosing of all electrical components should be prioritized. An electrical schematic for a new control system should be implemented. …

Delay-Independent Stability Analysis Of Linear Time-Delay Systems Based On Frequency, Xianwei Li, Huijun Gao, Keqin Gu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper studies strong delay-independent stability of linear time-invariant systems. It is known that delay-independent stability of time-delay systems is equivalent to some frequency-dependent linear matrix inequalities. To reduce or eliminate conservatism of stability criteria, the frequency domain is discretized into several sub-intervals, and piecewise constant Lyapunov matrices are employed to analyze the frequency-dependent stability condition. Applying the generalized Kalman–Yakubovich–Popov lemma, new necessary and sufficient criteria are then obtained for strong delay-independent stability of systems with a single delay. The effectiveness of the proposed method is illustrated by a numerical example.

Orientation-Dependent Pseudomorphic Growth Of Inas For Use In Lattice-Mismatched Mid-Infrared Photonic Structures, Gregory Edward Triplett, Charles Meyer, Emily Cheng

Electrical and Computer Engineering Publications

In this study, InAs was deposited on GaAs (100) and GaAs (111)B 2 degrees towardssubstrates for the purpose of differentiating the InAs growth mode stemming from strain and then analyzed using in-situ reflection high energy electron diffraction, scanning electron microscopy, Raman spectroscopy, reflectance spectroscopy, and atomic force microscopy. The procession of InAs deposition throughout a range of deposition conditions results in assorted forms of strain relief revealing that, despite lattice mismatch for InAs on GaAs (approximately 7%), InAs does not necessarily result in typical quantum dot/wire formation on (111) surfaces, but instead proceeds two-dimensionally due primarily to the surface orientation.

Low Volume Dispensing With High Speed Dispensers, Sunny Agarwal

Graduate Dissertations and Theses

With the high pace of innovation in the semiconductor manufacturing industry, there has been an increasing demand for more energy efficient and environmental friendly products. This research relates to a complex process of fluid dispensing at low volumes on a printed circuit board. Currently, a more refined non-contact dispensing terminology named “Streaming” is widely used to stream out material at low volumes for various applications. The key solution is to frame a dispensing method that lends itself most closely to the requirements of a specific production process.

This study represents a detailed approach of dispensing low volumes of materials in …

A Review Of Some Subtleties Of Practical Relevance, Keqin Gu

SIUE Faculty Research, Scholarship, and Creative Activity

This paper reviews some subtleties in time-delay systems of neutral type that are believed to be of particular relevance in practice. Both traditional formulation and the coupled differential-difference equation formulation are used. The discontinuity of the spectrum as a function of delays is discussed. Conditions to guarantee stability under small parameter variations are given. A number of subjects that have been discussed in the literature, often using different methods, are reviewed to illustrate some fundamental concepts. These include systems with small delays, the sensitivity of Smith predictor to small delay mismatch, and the discrete implementation of distributed-delay feedback control. The …

Optimization Of Inductively Coupled Plasma Dry Etching For Planar Waveguide Fabrication., Lim Weng Hong

Student Works (2010-2019)

Optimization of the Inductively Coupled Plasma (ICP) dry etching process parameters has been carried out. Seven main etching characteristics were considered in order to produce good etching quality. These characteristics are glass etching rates, selectivity of chromium to glass etching rate, channel side wall roughness, channel side wall vertical profile, channel cleanliness, critical dimension and resolution. Several ICP parameters that are affecting the etching characteristic were optimized in this work. These optimised ICP parameters obtained from this work are ICP power (880 W), bias power (45 W), operating chamber pressure (10 mtorr), reactant gas composition, reactant gas flow rate (35sccm …

Socio-Economic Impacts Of Computer Viruses In Tanzania, M Victor

Tanzania Journal of Engineering and Technology (TJET)

This paper reports on a research project conducted with an objective of identifying and assessing various approaches used by different computer users (Management, System Administrators and end users) in Tanzania to combat computer viruses (CVs), and to assess users' awareness level on CVs. Specifically, the study aimed at assessing the awareness level on CVs to the Tanzanian business community; analyze the socio -economic impact caused by CVs in Tanzania and; assess existing methods, capacity and limitations on controlling CVs in Tanzania. Data was collected using both questionnaires and interview from financial institutions such as NBC and BOT, and telecommunications sector …

Review Of The Product Development Process And Information Flow In The Manufacturing Industry: Problems And A Possible Wav Forward, E Opiyo

Tanzania Journal of Engineering and Technology (TJET)

No abstract provided.

Simulation Of The Communication Process In A Pin Mill, Ambrose J. M. Itika

Tanzania Journal of Engineering and Technology (TJET)

Prediction of the performance of comminution equipment by mathematical models and simulation poses a great challenge to the chemical engineer. This paper describes the simulation of grinding results obtained using an impact mill. Single particle results have been used to generate breakage and selection coefficients that were used for the evaluation of the model. Results have shown that simulation model is in good agreement with the experimental data obtained at a circumferential speed above 60 m/s. At lower speeds, the models shows only partial agreement in the middle particle size ranges. The application of the model is therefore limited for …

Diamondlike Carbon Thin Film Deposition Using A Rf Planar Coil Inductively Coupled Plasma System, Wai Soon Liew

Student Works (2000-2009)

A RF planar coil inductively coupled plasma system (ICPs) is setup for this project. The system is powered by a 13.56MHz, 550W, 500 RF generator. The RF power is transferred to the plasma via a planar induction coil. The impedance matching circuit consists of an air-core step-down transformer and a tunable vacuum capacitor. The typical E-H mode transition which is distinctive to the ICP has been observed in argon plasma, hydrogen plasma and hydrogen-methane admixture plasma. The studies carried out include the observation of intensity of light emission from the plasma, the power transferred at different pressures, the concentration of …

Application Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Arton Of Vibrational Techniques In Determination Of Dynamic Properties Of Agricultural Products-State Of The Art, Silas Kajuna

Tanzania Journal of Engineering and Technology (TJET)

Vibration is one of the techniques employed in the determination of dynamic properties of fruits and vegetables. It entails generation of a mechanical or acoustic vibrational signal which is propagated through the flesh of the agricultural material. A transducer is either attached or held close to the specimen to monitor the propagation of the signal through the specimen. The manner in which the signal is transmitted through the material is analyzed, and the dynamic properties of the specimen which relate to its firmness or its internal being are derived. The technique has been around for the past 30 years or …

An Alternative Method Of Interfacing A Dc Motor To A Microprocessor For Mo- Tion Control, M Selekwa

Tanzania Journal of Engineering and Technology (TJET)

A Simple and cheap alternative method Of interfacing a permanent mag- net dc motor to a motion control using switch- ing transistor motor drivers is presented. This method involves the use Of very few transistor-transistor logic (TTL) devices and a 555 timer to pro- duce a pulse width modulated (P WM) signal which is required by the mo- ror driver. The motor driver in this case should be of an H-bridge type. Like other methods currently in use, it relieves the MPU of all timing func- tions which are necessary in the generation of P WM signals. The present method, …