Polymer Science Commons^™

Microanalysis Of Polymer Chain Diffusion In Heat Seals, Russell Cooper

All Theses

Heat sealing is an integral method for the closure and protection of packaging. Previous work has shown that seal strength is developed by the interdiffusion of polymer chains within heat seals. Heat seals were made between two dissimilar materials. Poly(ethylene-co-acrylic acid) (EAA) was heat sealed to ionomer. Diffusion within the EAA-ionomer heat seals was estimated. The diffusion estimates were then related to resulting seal strength in the EAA-ionomer sealant system. Heated tooling sealing was utilized to make heat seals at 40 psi (275.79 kPa), 0.5 seconds, and a range of temperatures between 180˚F (82.22˚C) and 300˚F (148.89˚C). Scanning electron microscopy …

Synthesis And Characterization Of Chemically Functionalized Shape Memory Nanofoams For Unattended Sensing Applications, Anna Paola Soliani

All Dissertations

The work in this dissertation is devoted to the synthesis and characterization of novel materials for off-line unattended sensing: shape-memory grafted nanofoams. The fabrication process and characterization of highly efficient, polymeric nanosensor element with the ability to selectively detect analytes and retain memory of specific exposure events is reported. These shape memory nanofoams could potentially act as efficient and highly sensitive coatings for evanescent waveguide-based optical monitoring systems. On exposure to specific analytes, the polymeric coatings locally change their internal structure irreversibly at the nanolevel, affecting the local optical properties such as refractive index. Currently, enrichment polymer layers (EPLs) are …

Thermally Responsive Polymer Electrolytes For Inherently Safe Electrochemical Energy Storage, Jesse Kelly

All Dissertations

Electrochemical double layer capacitors (EDLCs), supercapacitors and Li-ion batteries have emerged as premier candidates to meet the rising demands in energy storage; however, such systems are limited by thermal hazards, thermal runaway, fires and explosions, all of which become increasingly more dangerous in large-format devices. To prevent such scenarios, thermally-responsive polymer electrolytes (RPEs) that alter properties in electrochemical energy storage devices were designed and tested. These RPEs will be used to limit or halt device operation when temperatures increase beyond a predetermined threshold, therefore limiting further heating. The development of these responsive systems will offer an inherent safety mechanism in …

Designing Magnetically Responsive Ultrafiltration Membranes, Robert William Dong

Graduate Theses and Dissertations

Ultrafiltration (UF) membranes developed out of a need for protein separation processes. Currently, they are used in a variety of industries ranging from food manufacturing to pharmaceuticals for two main purposes: concentration, separation, and buffer exchange. UF membrane processes in product streams undergo frequent use and like all membrane processes experience a gradual decline in performance due to fouling phenomena both irreversible and reversible. Ultimately, performance declines to a point where the UF membrane needs to be replaced. Frequent replacement of UF membranes is detrimental to major industries that require high product throughput using UF processes. Thus, it is important …

The Development Of A Laminated Copolyester Electric Guitar, Addison S. Karnes

Electronic Theses and Dissertations

This thesis is an investigation of the fabrication and assembly methodologies employed in the development of a proof-of-principle prototype electric guitar composed of laminated copolyester. The objective of the project was to develop the processes and procedures to create an optimized physical and visual bond between layers to minimize vibratory dissipation, thus maximizing sustain. A high speed CNC router, abrasive waterjet, laser engraver-cutter, as well as various manual fabrication and assembly methods were investigated in the construction of the guitar prototypes. The lamination processes explored include low-temperature, heat-assisted pressure bonding, solvent and chemical welding, and contact adhesives. The project concluded …

Low Molecular Weight Glucosamine/L-Lactide Copolymers As Potential Carriers For The Development Of A Sustained Rifampicin Release System: Mycobacterium Smegmatis As A Tuberculosis Model, Jorge Ragusa

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Tuberculosis, a highly contagious disease, ranks as the second leading cause of death from an infectious disease, and remains a major global health problem. In 2013, 9 million new cases were diagnosed and 1.5 million people died worldwide from tuberculosis. This dissertation aims at developing a new, ultrafine particle-based efficient antibiotic delivery system for the treatment of tuberculosis. The carrier material to make the rifampicin (RIF)-loaded particles is a low molecular weight star-shaped polymer produced from glucosamine (molecular core building unit) and L-lactide (GluN-LLA). Stable particles with a very high 50% drug loading capacity were made via electrohydrodynamic atomization. Prolonged …

Study Of Polyaniline For Use In An Organic Field Effect Transistor, Thomas Martin Sprinkle

Chemistry & Biochemistry Theses & Dissertations

Polyaniline's emeraldine base form was synthesized via chemical polymerization in HCl acidic media utilizing ammonium persulfate as the oxidant. Synthesis was done at room temperature and -30 'C and characterized for differences by X-ray diffraction, thermogravimetric analysis, and differential scanning calorimetry. Methanol soxhlet extraction was done to increase number average molecular weight from 77,400 to 81,000 and decrease the poly dispersity index from 3.82 to 2.14. Films were cast using N, N'- Dimethylpropyleneurea and N-Methylpyrrolidone and showed poor mechanical properties upon acidic doping.

Cyclic voltammetry was done with HC1 as the acidic media and an ITO coated slide as the …

Humic Substances-Based Polymer System, Gerard R. Thiel

Patents (University of Northern Iowa)

A system for use in forming polymer compositions, including as a replacement for phenolic based resin systems, for instance, in preparing foundry molds. In a preferred embodiment, the system includes the use of a) a polyermizable hydroxyl-containing component comprising a humic substance (as can be provided by lignite), b) an isocyanate component, and c) a catalyst, and preferably amine catalyst, component adapted to catalyze the polymerization of a) and b). The system is optionally used as binder system in the presence of a filler, such as, in combination with a foundry aggregate such as sand. A polymer system of this …

Polymer-Based Thermoelectric Devices, Stuart W. Hilsmier, Edward P. Tomlinson, Bryan Boudouris

The Summer Undergraduate Research Fellowship (SURF) Symposium

Currently, over 50% of all energy generated in the US is lost as waste heat, and thermoelectric generators offer a promising means to recoup some of this energy, if their efficiency is improved. While organic thermoelectric materials lack the efficiency of their inorganic counterparts, they are composed of highly abundant resources and have low temperature processing conditions. Recently, a new class of redox-active polymers, radical polymers, has exhibited high electrical conductivity in an entirely amorphous medium. In addition, these radical polymers have a simple synthetic scheme and can be highly tunable to provide desired electrical properties. In this study, the …

Radical Polymers As Anodic Charge Extraction Layers In Small Molecule Organic Photovoltaic Devices, Krystopher S. Jochem, Aditya G. Baradwaj, Bryan W. Boudouris

The Summer Undergraduate Research Fellowship (SURF) Symposium

Organic photovoltaic (OPV) devices based on the copper (II) phthalocyanine(CuPc)/ fullerene(C₆₀) system are an innovative photovoltaic technology optimal for situations requiring low-cost, transparent, and flexible devices. Furthermore, the high degree of reproducibility of this system allows for the ready study of new OPV technologies. Here, we have used this system to elucidate systematic structure-property-performance relationships for a new OPV anode modifier. The addition of interfacial modifier materials between the organic CuPc/C₆₀ layers and the metallic anode drastically can improve efficiency. Radical polymers are a class of polymers with aliphatic backbones and pendent stabilized radical groups. Here, we …

High-Productivity Membrane Adsorbers: Polymer Surface-Modification Studies For Ion-Exchange And Affinity Bioseparations, Heather Chenette

All Dissertations

This Dissertation centers on the surface-modification of macroporous membranes to make them selective adsorbers for different proteins, and the analysis of the performance of these membranes relative to existing technology. Traditional chromatographic separations for the isolation and purification of proteins implement a column packed with resin beads or gel media that contain specific binding ligands on their exposed surface area. The productivity of this process is balanced by the effective use of the binding sites within the column and the speed at which the separation can take place, in addition to the need to maintain sufficient protein purity and bioactivity. …

A Soft Condensed Matter Approach Towards Mathematical Modelling Of Mass Transport And Swelling In Food Grains, Michael Chapwanya, N. Misra

Articles

Soft condensed matter (SCM) physics has recently gained importance for a large class of engineering materials. The treatment of food materials from a soft matter perspective, however, is only at the surface and is gaining importance for understanding the complex phenomena and structure of foods. In this work, we present a theoretical treatment of navy beans from a SCM perspective to describe the hydration kinetics. We solve the transport equations within a porous matrix and employ the Flory–Huggin’s equation for polymer–solvent mixture to balance the osmotic pressure. The swelling of the legume seed is modelled as a moving boundary with …

Improved Efficiency Organic Photovoltaic Cells Through Morphology Control And Process Modification, Qi Wu

Dissertations

Organic photovoltaic (OPV) cells have drawn great attention due to the potential to produce flexible, light weight, affordable solar cells using polymer organic photovoltaic materials; however, the current power conversion efficiency achieved for these systems is too low for widespread implementation of the technology. Morphology and phase separation are key factors determining the performance of organic photovoltaic cells. Precise control of the size and distribution of the phase-separated photoactive domains is necessary for optimum photon-electron conversion. Polyhedral oligomeric silsesquioxane (POSS) nanostructered chemicals have the potential to provide enhanced control of morphology, crystallinity, and phase dispersion in polymeric blend systems. In …

Fundamental Investigations Of Clay/Polymer Nanocomposites And Applications In Co-Extruded Microlayered Systems, Jeremy John Decker

Dissertations

The second and fourth generations of hydroxylated dendritic polyesters (HBP2, HBP4) were combined with unmodified sodium montmorillonite clay (Na+MMT) in water to generate a broad range of polymer clay nanocomposites from 0 to 100% wt/wt Na+MMT. X-ray diffraction (XRD) and transmission electron microscopy (TEM) were used to investigate intercalation states of the clay galleries. It was shown that interlayer spacings were independent of generation number and changed over the composition range from 0.5 nm to 3.5 nm in 0.5 nm increments that corresponded to a flattened HBP conformation within the clay tactoids.

The HBP4/Na+MMT systems were investigated to study the …

Fluorine Containing Uv-Curable Materials For Advanced Transport Applications, James Thomas Goetz

Dissertations

The characterization of structure, thermal, gas transport, and free volume properties of two unique UV cured polymeric systems are studied and reported. In the initial pursuit of waterproof high water vapor transport membranes, it became apparent that the UV curing of fluorinated materials yielded routes to develop unique materials that fundamentally challenge conventional models for free volume and light gas transport behavior. UV-curing provides a means to rapidly “lock-in” morphologies that are accessible in the small molecule, monomer phase but rapidly become kinetically inaccessible when constraints such as covalent bonding and cross linking limit motion in the polymer system. This …

Interfacial Interactions Between Carbon Nanoparticles And Conjugated Polymers, Yanqi Luo

Master's Theses

Conjugated polymer based electronics, a type of flexible electronic devices, can be produced from solution by traditional printing and coating processes in a roll-to-roll format such as papers and graphic films. This shows great promise for the emerging energy generation and conversion. The device performance of polymer electronics is largely dependent of crystalline structures and morphology of photoactive layers. However, the solution crystallization kinetics of conjugated polymers in the presence of electron acceptor nanoparticles has not been fully understood yet. In this study, solution crystallization kinetics of poly (3-hexylthiophene) in the presence of carbon nanotubes and graphene oxide has been …

Opto-Electronic Devices With Nanoparticles And Their Assemblies, Chieu Van Nguyen

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Nanotechnology is a fast growing field; engineering matters at the nano-meter scale. A key nanomaterial is nanoparticles (NPs). These sub-wavelength (< 100nm) particles provide tremendous possibilities due to their unique electrical, optical, and mechanical properties. Plethora of NPs with various chemical composition, size and shape has been synthesized. Clever designs of sub-wavelength structures enable observation of unusual properties of materials, and have led to new areas of research such as metamaterials. This dissertation describes two self-assemblies of gold nanoparticles, leading to an ultra-soft thin film and multi-functional single electron device at room temperature. First, the layer-by-layer self-assembly of 10nm Au nanoparticles and polyelectrolytes is shown to behave like a cellular-foam with modulus below 100 kPa. As a result, the composite thin film (~ 100nm) is 5 orders of magnitude softer than an equally thin typical polymer film. The thin film can be compressed reversibly to 60% strain. The extraordinarily low modulus and high compressibility are advantageous in pressure sensing applications. The unique mechanical properties of the composite film lead to development of an ultra-sensitive tactile imaging device capable of screening for breast cancer. On par with human finger sensitivity, the tactile device can detect a 5mm imbedded object up to 20mm below the surface with low background noise. The second device is based on a one-dimensional (1-D) self-directed self-assembly of Au NPs mediated by dielectric materials. Depending on the coverage density of the Au NPs assembly deposited on the device, electronic emission was observed at ultra-low bias of 40V, leading to low-power plasma generation in air at atmospheric pressure. Light emitted from the plasma is apparent to the naked eyes. Similarly, 1-D self-assembly of Au NPs mediated by iron oxide was fabricated and exhibits ferro-magnetic behavior. The multi-functional 1-D self-assembly of Au NPs has great potential in modern electronics such as solid state lighting, plasma-based nanoelectronics, and memory devices.

Adviser: Ravi F. Saraf

Calculated Vs. Experimental Values For Volume And Surface Resistivity In Various Polymer Compounds, Megan Webster

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Versatile due to their resistance to high stress environments including but not limited to extreme temperature, pressure, and stress, polymers additionally have many uses in electrical applications wherein antistatic or conductive properties are preferential, i.e. conductive seals, oil pipeline spheres, and gaskets, to name a few. Being a complex material, many factors may affect the electrical resistivity of a given polymer compound including type and amount of carbon black, type of rubber, cure time and temperature, and dispersion, amongst other factors. External conditions such as relative humidity and temperature also play key roles. This paper will analyze five different rubber …

Mechanism Of Insulin Aggregation: Applied To Alzheimer's Disease, Milos Atz

Honors Scholar Theses

Alzheimer’s disease, a debilitating neurodegenerative illness, is caused by the irreversible aggregation of beta-amyloid proteins in the brain. In Alzheimer’s brains, the protein can become disfigured, causing it to aggregate into long, insoluble fibers that deposit on brain tissue. Studying the aggregation mechanisms of amyloid proteins can lead to a deeper understanding of the progression of Alzheimer’s disease and possibly point towards a potential cure or treatment for the disease. Heat induced aggregation of insulin provides a model system to study the aggregation of amyloidogenic proteins. This study investigates the early stages of heat induced insulin aggregation using dynamic light …

Study Of The Structure-Property Relationships That Determine The Effects Of Latexes And Starch Containing Latex Emulsions On The Performance Of The Barrier Coatings (Sub-Coat) For Paper, Joanna Marie Monfils

Master's Theses

The history of carbonless paper dates back to the 1940s. Before this, a carbon copy sheet was needed between sheets of paper to be able to produce one or more copies simultaneously during writing. The pressure from a pen or typewriter would help deposit the ink of the carbon paper onto the blank sheet of paper under the original written sheet to create a “carbon copy.” This method did however, have its disadvantages. Not only did it produce a limited number of copies, but it was also a messy process. So came the creative process of using microencapsulated dyes to …

Outlining The Biocidal Mechanisms Of Synthetic Antimicrobial Peptide Mimics, Tyler D. Brown

Honors Theses

Each day, antibiotic resistance affects the livelihood of individuals worldwide, especially in relation to hospital-acquired diseases. In an effort to combat this resistance, antimicrobial peptides, small biopolymers produced naturally by multicellular organisms, can be used to selectively eliminate bacteria and have demonstrated great potential as alternatives to conventional antibiotics. Many naturally-occurring antimicrobial peptides possess high concentrations of lysine and arginine amino acid residues, which are protonated and positively-charged at physiological pH. Herein, we describe the design and synthesis of antimicrobial peptide mimics, using amino acid mimics. N-3-aminopropyl methacrylamide (APMA) and 3-guanidinopropyl methacrylamide (GPMA) monomers mimic the amino acid residues lysine …

Optimizing Polymer Fluorescence For Explosives Detection, Rose K. Cersonsky

Honors Scholar Theses

Pyrene is commonly used for explosives detection, as when mixed with polystyrene, the fluorescence intensity of the resulting film can be used as an indicator of the presence of nitro-aromatic, nitro-ether, or nitro-amine explosives. Previous studieshave tested a three-component system including pyrene, polystyrene, and a salt, tetrabutylammonium hexafluorophosphate (TBAHP). From these previous studies, it has been seen that vapor pressure of the preparation area is a governing factor in the formation of excimers, which are instrumental in achieving and maintaining fluorescence intensity. In this study, three parameters – solution concentration, film thickness, and molecular weight of polystyrene are examined to …

Aging Of A Polymer Core Composite Conductor Under Combined Ozone And Temperature Conditions, James M. Middleton

Electronic Theses and Dissertations

The next generation High Temperature Low Sag Polymer Core Composite Conductors (HTLS PCCC) can experience harsh in-service environments including high temperature and highly concentrated ozone. In some extreme cases, it is possible that the conductors will experience temperatures of up to 180°C and ozone concentrations as high as 1% (10,000 ppm). Therefore, the primary goal of this research was to determine the most damaging aging conditions which could negatively affect the in-service life of the conductors. This included characterizing the aging in ozone and at high temperature of the HTLS PCCC hybrid composite rods and neat resin. It was found …

Development Of Cementitious Materials For Adhesion Type Applications Comprising Calcium Sulfoaluminate (Csa) Cement And Latex Polymer, Joshua V. Brien

Theses and Dissertations--Civil Engineering

The objective of this research was to develop high performing polymer modified calcium sulfoaluminate (CSA) cement materials for use in applications requiring superior adhesion characteristics. Little information is available describing interactions of CSA cement containing minor phase tri-calcium aluminate (C₃A) with commonly used admixtures. Given the scarcity of information, a basic approach for developing cementitious materials was followed. The basic approach consisted of four tasks: cement design, admixture design, polymer design and testing developed materials. The iterative, time consuming process is necessary for understanding the influence of specific constituent components on overall system behavior. Results from the cement …

Rheological Signatures In Limit Cycle Behaviour Of Dilute, Active, Polar Liquid Crystalline Polymers In Steady Shear, M. Gregory Forest, Panon Phuworawong, Qi Wang, Ruhai Zhou

Mathematics & Statistics Faculty Publications

We consider the dilute regime of active suspensions of liquid crystalline polymers (LCPs), addressing issues motivated by our kinetic model and simulations in Forest et al. (Forest et al. 2013 Soft Matter 9, 5207-5222 (doi:10.1039/c3sm27736d)). In particular, we report unsteady two-dimensional heterogeneous flow-orientation attractors for pusher nanorod swimmers at dilute concentrations where passive LCP equilibria are isotropic. These numerical limit cycles are analogous to longwave (homogeneous) tumbling and kayaking limit cycles and two-dimensional heterogeneous unsteady attractors of passive LCPs in weak imposed shear, yet these states arise exclusively at semi-dilute concentrations where stable equilibria are nematic. The results in Forest …

Toward Polymer Coating With Easy Ice Release, Chenyu Wang

Theses and Dissertations

Minimizing adhesion of ice has been the subject of extensive studies for applications such aircraft wings, wind turbine blades spacecraft, power transmission wires, while a growing interest concerns coatings for aerospace applications. The work described here describes progress for coatings and ice release test method development over the last few years. Major achievements include: (1) New Rigid Adherent-Resistant Elastomers (RARE), (2) A new Epoxied Cylinder (EC) adhesion test, (3) Validation of an ice release test, and (4) Study of ice adhesion strength on coating thickness for a PDMS elastomer. Rigid Adhesion-Resistance Elastomers (RARE) are comprised of 3F 1 terminated with …

One-Step Production Of Long-Chain Hydrocarbons From Waste-Biomass-Derived Chemicals Using Bi-Functional Heterogeneous Catalysts, Cun Wen, Elizabeth A. Barrow, Jason R. Hattrick-Simpers, Jochen A. Lauterbach

Faculty Publications

n this study, we demonstrate the production of long-chain hydrocarbons (C₈₊) from 2-methylfuran (2MF) and butanal in a single step reactive process by utilizing a bi-functional catalyst with both acid and metallic sites. Our approach utilizes a solid acid for the hydroalkylation function and as a support as well as a transition metal as hydrodeoxygenation catalyst. A series of solid acids was screened, among which MCM-41 demonstrated the best combination of activity and stability. Platinum nanoparticles were then incorporated into the MCM-41. The Pt/MCM-41 catalyst showed 96% yield for C₈₊ hydrocarbons and the catalytic performance was stable …

Electrospinning Applications Air Filtration And Superhydrophobic Materials, Negar Ghochaghi, Adetoun Taiwo

Graduate Research Posters

Electrospinning is a widely applicable technique that generates non-woven fibers in the micro and nano range. In this project two of its applications are highlighted namely filtration media and enhancement of wettability. The first project demonstrates that electrospinning can be used to produce new fiber filtration media with controlled microstructure. The bimodal and unimodal orthogonal and random filters were made and characterized against their filtration efficiency and pressure drop. Figure of Merit (FOM) was also calculated and discussed. It is shown that the FOM increases when the electrospun fibers are arranged into alternating layers of aligned course and fine fibers. …

Layer-By-Layer Assemblies For Membrane-Based Enzymatic Catalysis, Andrew R. Tomaino

Theses and Dissertations--Chemical and Materials Engineering

While considerable progress has been made towards understanding the effect that membrane-based layer-by-layer (LbL) immobilizations have on the activity and stability of enzymatic catalysis, detailed work is required in order to fundamentally quantify and optimize the functionalization and operating conditions that define these properties. This work aims to probe deeper into the nature of transport mechanisms by use of pressure-induced, flow-driven enzymatic catalysis of LbL-functionalized hydrophilized poly(vinyldiene) (PVDF)-poly(acrylic acid) (PAA)-poly(allylamine hydrochloride) (PAH)-glucose oxidase (GOx) membranes. These membranes were coupled in a sealed series following cellulose acetate (CA) membranes for the elimination of product accumulation within the feed-side solution during operation. …

Generation Of Multicomponent Polymer Blend Microparticles Using Droplet Evaporation Technique And Modeling Evaporation Of Binary Droplet Containing Non-Volatile Solute, Venkat N. Rajagopalan

Theses and Dissertations--Chemical and Materials Engineering

Recently, considerable attention has been focused on the generation of nano- and micrometer scale multicomponent polymer particles with specifically tailored mechanical, electrical and optical properties. As only a few polymer-polymer pairs are miscible, the set of multicomponent polymer systems achievable by conventional methods, such as melt blending, is severely limited in property ranges. Therefore, researchers have been evaluating synthesis methods that can arbitrarily blend immiscible solvent pairs, thus expanding the range of properties that are practical. The generation of blended microparticles by evaporating a co-solvent from aerosol droplets containing two dissolved immiscible polymers in solution seems likely to exhibit a …