Polymer Science Commons^™

Bio-Papcz: Corn Starch-Based Composite Bioplastic Reinforced With Pineapple Leaf Fiber (Palf), Zinc Oxide (Zno), And Polyvinyl Alcohol (Pva), Marvin C. Caya, Shervin Austin C. Huang, Jovar Khalel J. Maghari, Ruel M. Levida

Sinaya: A Philippine Journal for Senior High School Teachers and Students

Plastic pollution poses a serious global threat, as petroleum-based plastics persist for centuries, and their surging production of over 450 million tons overwhelms ecosystems (Ritchie et al., 2023). Using a quantitative experimental research design, the study examined the effects of varying concentrations of cornstarch-based bioplastic reinforced with pineapple leaf fiber (PALF), polyvinyl alcohol (PVA), and zinc oxide (ZnO) on the bioplastic’s tensile strength and soil degradability. Sample C2 (ZnO 3.0 %w/w; PVA 9.0 %w/w) demonstrated the optimal tensile properties with a tensile strength of 0.76 MPa and an elongation at break of 6.40%, which was attributed to the addition of …

Effect Of Varying Chitosan Molecular Weights On The Morphology And Physical Characteristics Of Pva/Chitosan Composite Hydrogels, Yuan Alfinsyah Sihombing, Halida Rahmi Luthfianti, William Xaveriano Waresindo, Marathur Rodhiyah, Nur’Aini Nafisah, Dian Ahmad Hapidin, Dhewa Edikresnha, Khairurrijal Khairurrijal

Makara Journal of Science

We employed the innovative freeze–thaw method to investigate the effect of chitosan (CS) molecular weights incorporated into polyvinyl alcohol on the morphology and physical characteristics of the hydrogel. This study aimed to unravel the intricate relationships between CS molecular weight variations, CS concentration, and the number of freeze–thaw cycles (4 or 6 cycles) on hydrogel swelling degree and weight loss. Incorporating CS improved the hydrogel structure and enhanced its porosity, resulting in remarkable increases in swelling degree ranging from 2 to 6 times the initial weight. Higher molecular weight CS (310,000–375,000 Da) exhibited a lower swelling degree than medium molecular …

Modern Ir-Spectroscopic Methods For The Analysis Of Hydroxybenzene-Methanal Resin Obtained On The Basis Of 2,5-Furandion, Sherali Anvarovich Umarov, Ravshan Israilovich Ismailov Ismailov

Technical science and innovation

The chemical changes occurring during the synthesis of hydroxybenzene-methanal resins obtained on the basis of 2,5-furandion under various ratios and temperature conditions were investigated using the IR spectroscopic method. Analysis of the compositional changes in the resin during the production of the thermoreactive resin revealed that the content of hydroxyl groups (~3300–3500 cm⁻¹) decreased, while the aldehyde groups (~1700–1750 cm⁻¹) increased; moreover, the presence of ether groups (~1050–1150 cm⁻¹) indicated that the process was successful. The synthesis of resins based on thermoreactive hydroxybenzene-methanal resins was carried out at high temperatures (70°C, 80°C, 95°C). During the identification of the functional groups …

Effect Of Temperature On Physicochemical Properties Of Plasticized Hydroxypropyl Methylcellulose K100–Carbopol 934 Films Containing Propylene Glycol As Plasticizer, Braja Bihari Panda, Rudra Narayan Sahoo, Amit Kumar Nayak

Makara Journal of Science

This paper studies the effect of different temperatures on different important physicochemical characteristics of plasti-cized hydroxypropyl methylcellulose (HPMC) K100-Carbopol 934 films containing propylene glycol (as a plasticizer), such as the rheology, thickness, folding endurance, tensile strength, elongation, and in vitro swelling with diffusion ki-netics. Rheology of HPMC K100-Carbopol 934 blend dispersions containing propylene glycol (before film casting) demonstrates that the flow is shear thinning and pseudoplastic. In the study of in vitro swelling, the relaxation-controlled transport is the predominant process of solvent diffusion into these plasticized HPMC K100–Carbopol 934 blend films under study. The results suggest that the solvent transport …

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti

Makara Journal of Science

Water pollution affects life sustainability; hence, several efforts have been exerted to overcome this problem. For ex-ample, nanofiber membrane technology is introduced to retain solutes while allowing only water molecules to pass through the system. Therefore, this study aimed to maximize the technology for water filtration using the electrospin-ning method by combining Styrofoam waste-based polymer with activated carbon from coconut shell waste (ACCS). The nanofiber diameter produced ranged from 590 nm to 610 nm with porous characteristics and without beads. The carbon content varied from 68.04% to 69.84%, according to the energy dispersive X-ray measurement, demonstrating the composite’s effectiveness. The …

Optimization Of Tps Films Using An Adaptive Design Of Experiments Approach In A Bayesian Optimization Framework, Theresa Marks, Gracie White, Scott Lohman, Mayank Malhotra

The Journal of Purdue Undergraduate Research

Plastic pollution, amounting to 12 million tons annually, necessitates sustainable alternatives to single-use plastics. Compostable thermoplastic starch (TPS) films show promise but lack strength and durability compared to traditional plastics. This study employs an adaptive design of experiments (DoE) approach to enhance TPS films by optimizing testing points. The research focuses on varying concentrations of plasticizers (acetic acid and glycerol) in a water and potato starch mixture, aiming to identify the optimal ratio maximizing tensile strength and % elongation at break. Gaussian process regression (GPR) with uncertainty estimation and Bayesian optimization (BO) utilizing an acquisition function (AF) are employed. The …

Polyvinyl Alcohol–Red Cabbage Nanofibers As Ph-Responsive Freshness Sensors For Advanced Food Packaging Technology, Foliatini Foliatini, Singgih Wibowo, Henny Rochaeni, Suhartini Suhartini, Fachrurrazie Fachrurrazie, Arzzaq Imanda Prianditya, Pradnadia Putri Hadriansyah, Naura Athira Putri Siregar, Novi Nurpadilah, Putri Alfiani, Maudi Rahim, Endah Sriwahyuni

Makara Journal of Science

The development of innovative food packaging technologies, particularly those capable of monitoring freshness, has become increasingly important in the food industry. This research explores the development of a pH-responsive freshness sensor using polyvinyl alcohol–red cabbage (PVA/RC) nanofibers. The nanofibers are fabricated through the electrospinning technique and meticulously analyzed via scanning electron microscopy, Fourier-transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). The results underscore the fine structure of the nanofiber matrix, with an average diameter of ~68 nm. FTIR analysis substantiates the presence of anthocyanin compounds from RC within the PVA/RC nanofibers, which confirms the integration of beneficial components into …

Synthesis Of Uv-Blocking Titanium Oxide Films Via Remote-Type Atmospheric Pressure Plasma Cvd, Hayate Endo, Akira Shirakura, Shinya Kudo, Tetsuya Suzuki

Journal of Applied Packaging Research

This study aims to enhance UV resistance in plastics, focusing on polycarbonate (PC) and polypropylene (PP) commonly used in reuseable packaging. Traditional organic UV absorbers face safety and cost challenges, prompting our investigation into alternative methods. We utilized chemical vapor deposition (CVD), specifically Atmospheric Pressure Plasma Enhanced CVD (AP-PE-CVD), to apply titanium oxide (TiO₂) thin films. This innovative approach, using a remote-type AP-PE-CVD technique, enables coating on complex surfaces and 3D objects. The produced TiO2 films, containing over 20% titanium, showed a UV transmittance of 14.5% at 310 nm and effective UV blocking starting at 372 nm. The …

Optimizing The Expression Of Polyethylene Terephtalate Hydrolase-Encoding Synthetic Gene In Escherichia Coli Arctic Express (De3), Jocelyn Nataniel, Maria Ulfah, Dini Achnafani, Niknik Nurhayati, Gabriela Christy Sabbathini, Sri Rezeki Wulandari, Abinawanto Abinawanto, Is Helianti

Makara Journal of Science

The waste of polyethylene terephthalate (PET) plastic waste in Indonesia is a pressing concern due to its slow degradation and potential environmental damage. One promising solution is to utilize polyethylene terephthalate hydrolase from Ideonella sakaiensis (IsPETase), an enzyme that specifically degrades PET. However, inducing the expression of IsPETase synthetic gene in Escherichia coli BL21 (DE3) has been challenging because much of it remains insoluble. This study aimed to express IsPETase in E. coli Arctic Express (DE3) and optimize the conditions to enhance its production. First, pET22b(+)pelB-IsPETase was inserted into E. coli Arctic Express (DE3). The …

Study Of Reactive Distillation Equipment For Eterification Process, Abbos Elmanov, Abdulaziz Bakhtiyorov, Adham Norkobilov, Olimjon Maksudov, Zarif Oripov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to study the chemical technological processes for eterification processes, and the reactive distillation unit, which carries out the reaction and separation process in one device, was chosen as the object of research. А reаctive distillаtion system is exаmined to produce for the production of Ethyl Acetate (EtAc) viа eterificаtion of acetic acid (HAc) with ethаnol. Optimizаtion methods using sensitivity analysis аre аlso conducted. Cаlculаtion of vаpor liquid equilibrium of the mixture system is done using UNIFАC model. Heat integration from the distillate stream of the column to the acid feed stream and from bottom …

Robust Gasification Trial Results For A Variety Of Difficult-To-Recycle Packaging-Related Materials, Bruce A. Welt

Journal of Applied Packaging Research

Currently, recycling requires nearly absolute sorting of materials to accommodate the limited capabilities of existing recycling infrastructure. Whether a material is “recyclable” depends more on the method of recycling than the material itself. Our dependence upon sorting has limited success of recycling and has stifled our ability to achieve circular economy sustainability with plastic packaging materials. Our dependence upon sorting is rooted in our material-specific recycling processes. However, newer robust recycling processes are commercially available that reduce or eliminate the need to sort waste, and can convert mixed waste into primary feedstock chemicals, such as methanol for subsequent manufacture of …

Retracted: Fabrication And Characterization Of Wood Fiber Reinforced Polymer Composites, Firoz Ahmed, Omar Faroque, Saif Hasan, Khan Rajib Hossain, Rezaul Karim Sheikh

Al-Bahir

Wood-polymer composites (WPCs) combine the properties of wood and polymers. Creating composites involves adding plant or wood fibers as fillers to a polymer matrix. This study used mahogany and mango wood sawdust as reinforcement materials, while high-density polyethylene (HDPE) and polyvinyl chloride (PVC) were used as matrices. The investigated data in this study comprises four different (10, 20, 30, and 40) weight percentages (wt%) of mahogany and mango sawdust paired with corresponding wt% (90, 80, 70, and60) of HDPE and PVC matrices. The extrusion method produced composites with different amounts of sawdust and polymer matrices. Wood polymer composites were characterized …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

Removal Of Hexavalent Chromium From Water By Chitosan-Enhanced Ultrafiltration, Putu A. Y. Indiasih, Anindita D. Syaifudin, Nurul Faiqotul Himma, Bambang Ismuyanto

Makara Journal of Technology

Polymer-enhanced ultrafiltration has gained increasing attention as a selective separation process to remove small solutes, such as metal ions, from water or wastewater. Hexavalent chromium Cr(VI) is one of the metal ions in wastewater that has received considerable attention because of its toxicity. Chitosan was used in this study as the polymer to bind Cr(VI) to enhance its removal by ultrafiltration. The effects of chitosan-to-Cr(VI) ratio on Cr(VI) rejection and permeate flux were investigated. In addition, the fouling tendency was evaluated. Results showed that the addition of chitosan with a mass ratio of 12.5 increased the Cr (VI) rejection from …

Sustainable Material For Urea Delivery Based On Chitosan Cross-Linked By Glutaraldehyde Saturated Toluene: Characterization And Determination Of The Release Rate Mathematical Model, Jayanudin Jayanudin, Retno S. D. Lestari, Indar Kustiningsih, Dandi Irawanto, Rozak Rozak, Reyonaldo L. A. Wardana, Fakhri Muhammad

Karbala International Journal of Modern Science

The aims of this study were to characterize the urea-loaded chitosan microspheres and determine the release kinetic constants and diffusion coefficients. An emulsion cross-linking method was used to prepare the urea-loaded chitosan microspheres. Urea was dissolved in a solution of chitosan then put into vegetable oil and stirred to form an emulsion. Glutaraldehyde saturated toluene (GST) was added into the emulsion dropwise while continuously stirring for the solidification process. Chitosan microspheres filled with urea were washed, dried, and then analyzed. Characterization of the urea-loaded chitosan microspheres was conducted using a scanning electron microscope (SEM), Raman spectroscopy, X-ray diffraction, and particle …

Effect Of Temperature, Catalyst Concentration And Time, On Polylactic Acid Production From Sisal Boles Juice By Ring Open Polymerization, Neema O. Msuya

Tanzania Journal of Engineering and Technology (TJET)

Polylactic acid (PLA) is a biodegradable and renewable alternative to non-biodegradable petrochemical-based polymers that is environmentally friendly and green. PLA can be made from a variety of agricultural wastes that contain sugars, such as sisal boles. This study aimed at analysing the possibility of producing PLA from lactic acid (LA) produced from sisal bole. A 2n factorial design was used to analyse the effects of temperature (160-180ºC), time (1-2 hrs) and tin octoate catalyst concentration (0.025-0.05%) on the PLA yield during polymerization. Minitab Version 20.2.0 was used to design the experiment and analyse the effects on the responses through ANOVA. …

The Effect Of Chitosan On The Surface Properties Of Cellulose-Based Paper Obtained From The Stem Of Flaxseed, E A. Egamberdiev, Y T. Ergashev, Kh Kh Khaydullaev, G Y. Akmalova, G R. Rakhmonberdiev

Technical science and innovation

This paper examines the effects of chitosan, starch, and polyvinyl alcohol (PVA) to improve the surface properties of cellulose-based paper obtained from local raw materials. The polymers are incorporated into the paper polythene by spraying. The results showed that the addition of chitosan to paper polythene, which is made of cellulose fibers, has an improvement in surface properties compared to the effect of other additives. The degree of exposure of starch coincided with the degree of exposure of chitosan, but it resulted in a decrease in the water absorption potential of the paper compared to chitosan at the same concentration. …

Research Of New Fireproof Supplied Polymer Composites Based On Epoxy Resin For Metal Structures, Kuvondiq Murtazaev, F.N. Nurkulov, D.N. Mukhiddinov, M.T. Аbdirova

Technical science and innovation

In the article proposes new compositions based on fire retardant expanded polymer composites of epoxy resin ED-20 and phosphorus-containing oligomers, catalysts, aluminum hydroxide and nitrogen-containing compounds.

The obtained sample of fire retardant expanded polymer composites based on epoxy resin, as well as the initial substances, were investigated by IR spectroscopy (Nicolet 5700), thermogravimetric analysis (TG) (SDT Q600) of physical and chemical properties and determination of fire retardant efficiency according to GOST R 53295-2009.

Infrared spectroscopy has been used to determine the bends and epoxy groups that characterize composites, as well as to determine the frequencies of phosphorus, nitrogen, and metal-containing …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Helicopter Shaft Heating Parameters For Polyamide-11 Coating, Selim Kevran Ph.D, Uğur Ati̇ci̇

International Journal of Aviation, Aeronautics, and Aerospace

In this study, the heating parameters required for polyamide-11 (P11) coating of the helicopter shaft were investigated. The torsion value created by the force applied to the middle of the helicopter's shaft is measured. Heating before coating affects the torsion value of the shaft. A new heating mechanism has been designed to cover the shaft surface without changing the torsion value of the shaft. Thus, the coating surface is left inside the furnace and the torsion measurement area outside of the furnace. Taguchi method was used to determine heating parameters such as furnace type, initial temperature and heating time. The …

Evaluation Of Biodegradability Characteristics Of Cellulose-Based Film As Per Is/Iso 14855-1, Narayan C. Saha Dr, Gaurav Madhu Dr, Diksha B. Kadu Ms

Journal of Applied Packaging Research

Biodegradable polymers (especially those derived from plant sources) begin their lifecycle as renewable resources, usually in the form of starch or cellulose. In this paper, the evaluation of biodegradability of cellulose-based polymer film under controlled composting conditions as per the guidelines of IS/ISO 14855 (Part-1) standard has been described. Microcrystalline cellulose (MCC) powder was taken as positive-control polymer. The apparatus used to analyse the degree and rate of biodegradation was developed indigenously. The validation of the biodegradability testing apparatus was also performed as per the prescribed test method given in IS/ISO 14855-1.

Biodegradable Polymeric Film For Food Packaging, Neelam Yadav, Raminder Kaur

Journal of Applied Packaging Research

Food packaging films that show post-consumer biodegradability are rarely explored by researchers. The present study was carried out to investigate the physicomechanical characteristics of ethyl cellulose (EC) based films to be used in food packaging. Ethyl cellulose was plasticized with different percentage of polyethylene glycol (PEG). The samples of standard dimensions were subjected to different testing such as soluble matter content, moisture content, oil permeability, surface morphology, mechanical testing etc. The data obtained was analysed to decide the moderate percentage of plasticizer that can be used to provide a rational explanation of a perfect quality specimen. It has been revealed …

Review Of Challenges And Advances In Modification Of Food Package Headspace Gases, Ziynet Boz, Bruce A. Welt, Jeffrey K. Brecht, William Pelletier, Eric Mclamore, Gregory A. Kiker, Jason E. Butler

Journal of Applied Packaging Research

Modified Atmosphere Packaging (MAP) has been widely used as an effective way to preserve foods. Fresh produce, meat and meat products, seafood, and dairy products can benefit from modified gaseous atmospheres, which are usually achieved by reducing oxygen and increasing carbon dioxide concentrations, within limits, defined by product tolerances. MAP of fresh produce is particularly challenging because products are living and respiring. Respiration rates depend on several factors including temperature, oxygen, and carbon dioxide concentrations. Balancing package permeation with respiration is challenging, often due to limited selection of practical packaging materials. Failing to remain within tolerance limits of products leads …

Definite Indefiniteness Of "Molecular Weight" As A Claim Term For Polymer-Related Patents, Ping-Hsun Chen

The Journal of Business, Entrepreneurship & the Law

The molecular weight of a polymer is not just a number for a single molecule. In fact, molecular weight measurement is based on a large volume of molecules of the same polymer. Due to the non-uniformity of molecular weights, there are several methods to measure an “average molecular weight” of a polymer. Unfortunately, the Federal Circuit in Teva Pharms. USA, Inc. v. Sandoz, Inc., 789 F.3d 1335 (Fed. Cir. 2015), held that the term “molecular weight” in several polymer claims was indefinite, because the term could mean either peak average molecular weight, number average molecular weight, or weight average molecular …

Development Of Starch-Polyvinyl Alcohol (Pva) Biodegradable Film: Effect Of Cross-Linking Agent And Antimicrobials On Film Characteristics, Aniket Satish More, Chandani Sen, Madhusweta Das

Journal of Applied Packaging Research

To satisfy the need of developing eco-friendly flexible antimicrobial packaging film with minimum use of synthetic chemical ingredients, the present study examined the efficacy of citric acid (CA) as cross-linking agent and essential oils (EOs), viz., cinnamon essential oil (CEO) and oregano essential oil (OEO) as natural antimicrobials in corn starch-polyvinyl alcohol (CS-PVA) film. Compared to film prepared from filmogenic solution (FS) containing 75 kg CS+8.75 kg PVA+24.6 kg glycerol per m³ FS, film additionally containing CA at 0.07 kg/kg CS indicated 95% higher ultimate tensile strength (UTS) and 27% lower water vapor permeability (WVP). Film developed with incorporation …

Producing Food Packaging Printing Ink Via Green Emulsion Aggregation Method, Maryam Ataeefard, Shohre Rouhani

Journal of Applied Packaging Research

Digital printing will become more and more important in the packaging industry. Digital printing technology is growing because it allows the print suppliers to improve the level of service they offering to their customers, as well as, it opens new opportunities and helps them to make more money. Additives, dyestuffs, resin and other chemicals in packaging printing ink may influence safety of the food. Therefore, choosing suitable materials are very important in food packing ink. Over the last years, many printing ink manufacturers moved toward more sustainable inks. Drivers for this development, besides the resource scarcity and a higher legislative …

Film Performance Of Poly(Lactic Acid) Blends For Packaging Applications, Carlos A. Diaz, Hsunpao Y. Pao, Sungyoung Kim

Journal of Applied Packaging Research

Poly(lactic acid) (PLA), a biodegradable thermoplastic derived from renewable resources, stands out as a substitute to petroleum-based plastics. PLA based films for food packaging has been an area of both commercial and research interest within the context of sustainability. In spite of its high strength, packaging applications have been limited because PLA is more brittle than traditional oil-based plastics. Because of this, films display low tear and impact resistance and produce a loud crackling sound when manipulated. Although many studies address the toughening of PLA in the bulk, little attention has been placed on the film performance. The present study …

Occurrence Of Reverse Side Effects In Corona Treatment Of Dispersion-Coated Paperboard And Its Influence On Grease Barrier Properties, Sami-Seppo Ovaska, Ringaudas Rinkunas, Tadeusz Lozovksi, Robertas Maldzius, Jonas Sidaravicius, Leena-Sisko Johansson, Monika Österberg, Kaj Backfolk

Journal of Applied Packaging Research

The uncoated side of dispersion-barrier-coated paperboards was exposed to positive and negative direct current corona treatments in order to confirm the occurrence of backside treatment and clarify its effects on the usability of the paperboard. The main component of the coating dispersions was hydroxypropylated potato starch and the effects of talc and styrene-butadiene latex additions on backside treatment were evaluated. Coatings with a high talc proportion showed excellent initial grease resistance, but corona-induced strikethroughs caused a drastic decrease in grease penetration time. The root-mean-square roughness measurements revealed moderate surface roughening at the backside, indicating thus backside treatment. The alterations in …

Elevated Test Pressure Significantly Reduces Dynamic Accumulation Oxygen Transmission Rate (Astm F3136) Measurement Time For Barrier Packaging Films, Bruce A. Welt

Journal of Applied Packaging Research

Measurement of gas transmission rates of materials is important for successful package design. The dynamic accumulation (DA) method (ASTM F3136) is becoming increasingly popular for measuring oxygen transmission rate (OTR) due to its simplicity and low cost. However, measurement time increases with barrier properties of materials, limiting measurement throughput. A dynamic accumulation measurement prototype capable of operating up to 1,000 psig was developed in order to accelerate gas transfer by boosting concentration gradients via elevated absolute pressures. Results show that measurement results were independent of test pressure while measurement times were substantially reduced. These results also suggest that gas transmission …

Calculated Vs. Experimental Values For Volume And Surface Resistivity In Various Polymer Compounds, Megan Webster

Pursuit - The Journal of Undergraduate Research at The University of Tennessee

Versatile due to their resistance to high stress environments including but not limited to extreme temperature, pressure, and stress, polymers additionally have many uses in electrical applications wherein antistatic or conductive properties are preferential, i.e. conductive seals, oil pipeline spheres, and gaskets, to name a few. Being a complex material, many factors may affect the electrical resistivity of a given polymer compound including type and amount of carbon black, type of rubber, cure time and temperature, and dispersion, amongst other factors. External conditions such as relative humidity and temperature also play key roles. This paper will analyze five different rubber …