Polymer Science Commons^™

Tuning The Morphology Of Triblock Copolymers Via Homopolymer Blending, John F. Searles

Honors Theses

Morphology plays an important role in the physical properties of block copolymer (BCP) materials. Depending on the type of morphology and chemical composition of the blocks, BCPs are used in applications ranging from soft biomaterials for biomedical devices to rigid materials for ballistics protection. Due to incompatibility between comonomers and required block weight ratios to achieve targeted morphologies, it is generally necessary to use complex, time-consuming, and expensive synthetic techniques to prepare BCPs. As a result, there is increased interest in the development of new processing methods to tailor block copolymer morphology without the need for additional synthesis. The morphological …

Experimental Evaluation Of Mesh Size In Physically Crosslinked Polymer Gels Using Dynamic Light Scattering, Duncan M. Hill

Honors Theses

Block copolymer gels are under consideration as drug delivery patches. Controlling and modeling the transport inside the gel is an important contribution to the successful delivery of pharmaceuticals. The diffusive transport of a solute – such as a therapeutic compound – within the gel can be described by the mesh size of the gel, which is defined as the distance between polymer chains. Existing experimental evaluations of mesh size do not work for block copolymer gels due to differences in the fundamental gel structure. As such, an experimental method of measuring mesh size of block copolymer gels using dynamic light …

The Biological Activity Of Dual-Responsive Glycopolymers For Intracellular Codelivery Of Antigen And Lipophilic Adjuvant, Micaela Shields

Honors Theses

Subunit vaccines present themselves as an attractive alternative to traditional approaches to vaccines, which utilizes whole organisms to trigger an immune response. While these traditional approaches have proven themselves reliable within the history of vaccinations, they generally deliver subpar robust cellular-mediated immunity and pose many safety risks. Composed of proteins and /or peptides, subunit vaccines are safer and more precise alternatives to traditional approaches. However, the pharmacokinetic properties of the macromolecules that make up these vaccines hinder the subunit vaccine’s level of immunogenicity [d1] Examples of this hindrance include but are not limited to aggregation at the injection site and …

Development Of A Solution Synthesis Of Poly(Sebacic Anhydride) With The Activating Agent 4-Toluenesulfonyl Chloride: Understanding The Effect Of Different Bases On The Reaction Products, Patricia Poley

Honors Theses

The overall goal of this honors thesis was to develop a solution synthesis of Poly(Sebacic Anhydride) with the activating agent 4-toluenesulfonyl chloride and understand the effects of varying temperature, bases, and the addition order of reagents on the reaction.

Polyanhydrides are a class of hydrophobic, degradable polymers used in controlled drug delivery for 30 years. They are synthesized through three general methods: melt polycondensation, solution polycondensation, and ring-opening polymerization. Of these three methods, solution polycondensation typically results in products with lower molecular weight. Previous work in the Vogel lab identified two new ways to synthesize anhydrides using solution polycondensation reactions …

Layered Epoxide-Amine/Boron Nitride/Graphene Nanocomposites For Enhanced Multifunctional Shielding, Alyssa J. Necaise

Honors Theses

The development of high-power electromagnetic wave sources in the modern era has the ability to interfere with aircraft electronics and cause localized heating – necessitating advanced materials for electromagnetic interference (EMI) and thermal shielding. Multifunctional nanoparticles dispersed within polymer matrices can combat these issues; however, the best way to combine thermally and electrically conductive species to maximize electromagnetic interference shielding and thermal shielding is undetermined. Multifunctional layered epoxide/amine nanocomposites were prepared from tetra and octafunctional epoxide monomers (TGDDM and SU-8), 4,4-DDS tetrafunctional amine curative, and 1 wt.% hexagonal boron nitride nanoplatelets and/or 1 wt.% graphene nanoplatelets to form monolayer and …

Development Of Upconverting Films Containing Singlet Sink, Blake Mckay

Honors Theses

Upconversion is the conversion of light from a longer wavelength to a shorter wavelength. This technique has a wide range of applications in solar technology, bioimaging, drug delivery, and many other fields.¹ In this study, a three-part upconverting system was developed including a component termed singlet sink in order to increase upconversion efficiency. The components of this system included Palladium (II) Octaethylporphrin (PdOEP), pyrenebutanol, and 9-phenyl-10-(p-tolylethynyl)-anthracene (PTEA). A procedure was developed in order to create and process films containing these three materials dispersed in a poly(methyl methacrylate) (PMMA) matrix. Upconversion was analyzed in both solution and the …

Investigating The Effect Of Polymer Hydrogels On The Antimicrobial Properties Of Activated Carbon Through The Utilization Of Bacterial, Viral, And Parasitic Microorganisms, Zoe Gunter

Honors Theses

Activated carbon (AC) has long been utilized in biomedical applications due to its innate antimicrobial characteristics. However, little is understood about the mechanism of action that allows AC to prohibit the propagation of different pathogen species. To further ascertain these characteristics and how they affect the propagation of pathogens, procedures were designed with bacterial, viral, and parasitic agents which were utilized in conjunction with varying concentrations of polymer hydrogels to examine the antimicrobial efficacy of AC. The studies performed for this thesis were conducted employing coconut-based AC and Noveon^® AA-1 Polycarbophil USP or Carbopol^® 974P NF hydrogels which, …

Sustainable Polylactic Acid Foam Development Through Solid-State Processing, Philip Onffroy

Honors Theses

Plastics play a vital role in global materials industries, but they contribute to environmental and ecological toxicity effects that accelerate climate change. One important category of plastic material is polymer foams, which have widespread applications in insulation, packaging, and storage. Current bio-based plastic foams that originate from natural, non-petroleum feedstocks are potential solutions but do not yet have adequate properties to supplant petrochemical-based plastic foams. This project aims to generate, test, and analyze bio-based polylactic acid (PLA) polymer foams developed through methods involving solid-state processing such as solid-state shear pulverization (SSSP) and cryogenic milling. SSSP has previously been shown to …

Assessing Solvent Viscosity Impact On The Physical Characteristics Of Polymeric Organogels, Cameron Hong

Honors Theses

Traditionally, studies of polymeric organogels focus on the impact of polymer factors (e.g., molecular weight and polymer concentration) on the gels’ mechanical and transport properties. Alternatively, this study seeks to assess the impact of altering solvent viscosity, while holding polymer factors constant. The gels in this study were composed of different viscosity mineral oils, styrene-ethylene-butylene-styrene (SEBS) triblock copolymer as a gelator, and oleic acid (OA) as a model drug. Samples were formulated to have 6.5, 11.2, and 15.7 wt% SEBS copolymer for each mineral oil, varying in viscosity from ≈30 mPa*s to ≈500 mPa*s. Uniaxial mechanical testing was performed to …

Assessing The Impact Of Block-Selective Homopolymers On The Diffusion Of Payload Through Polymeric Organogels, Ian Coates

Honors Theses

Styrenic polymer gels have received recent attention for their application in transdermal patches due to their unique properties. Previous research in the pharmaceutical industry has identified that polymeric gels, specifically styrenic gels, have the potential to encompass multiple functions of the transdermal delivery patch including controlling mechanical and delivery properties. To tailor styrenic gels either the gel nanostructure or the drug complex can be controlled. Specifically, this thesis investigated the effect of gel nanostructure in an attempt to control the gel diffusivity and mechanical properties. To control gel nanostructure a phase selective styrene homopolymer was used at varying concentrations. It …

Determination Of Hydrogel Degradation By Passive Mechanical Testing, Avery Rosh-Gorsky

Honors Theses

This paper details a new technique to measure the mechanical properties of ETTMP PEGDA hydrogels using Hertz Contact Theory and simultaneously analyze both the model drug release and gel erosion in situ. This method involves curing a drug loaded hydrogel in a standard cuvette and placing a glass bead and phosphate buffer solution (PBS). Over time, the cross-linked network of the hydrogel breaks down, and, as a result, the ball sinks into the hydrogel. This method provides a macroscopic and inexpensive way to continuously and passively measure properties of the hydrogel as the hydrogel degrades. By plotting both the …

Investigating The Effect Of Hydrophilic Block Length On The Co-Assembly Behavior Of Amphiphilic Triblock Copolymers, Alexandra M. Garrett

Honors Theses

Polymer vesicles and micelles have been of interest in the scientific community for the past few decades due to potential biomedical applications in areas such as drug delivery, nanoreactors, and biosensing. Polymer vesicles and micelles are formed through the self-assembly of amphiphilic block copolymers. The objective of this project is to gain a better understanding of the influence of hydrophilic block copolymer length and composition in controlling the resulting morphologies from the co-assembly of triblock copolymers. First, a hydrophobic block composed of poly(methyl acrylate) was synthesized using reversible addition-fragmentation chain-transfer (RAFT) polymerization mediated by a difunctional chain-transfer agent. The block …

Biocompatible, Responsive Polysoaps Via Raft Copolymerization For The Delivery Of Model Cancer Therapeutics, Mason Dearborn

Honors Theses

Many chemotherapeutic drugs are small, hydrophobic molecules that require water-soluble, biocompatible nanocarriers for enhanced vascular circulation. Existing polymeric carriers either conjugate the drug along a copolymer backbone or sequester drugs within a protected interior domain to be delivered to specific sites in the body. Such therapeutic systems must overcome a myriad of hurdles, beginning with complex, multi-step syntheses, followed by other inherent barriers that limit the efficiency of drug delivery at the targeted site. This work aims to circumvent a number of these issues using biocompatible, stimuli-responsive polysoaps that are capable of unimeric micelle formation, hydrophobic drug delivery, and triggered …

Outlining The Biocidal Mechanisms Of Synthetic Antimicrobial Peptide Mimics, Tyler D. Brown

Honors Theses

Each day, antibiotic resistance affects the livelihood of individuals worldwide, especially in relation to hospital-acquired diseases. In an effort to combat this resistance, antimicrobial peptides, small biopolymers produced naturally by multicellular organisms, can be used to selectively eliminate bacteria and have demonstrated great potential as alternatives to conventional antibiotics. Many naturally-occurring antimicrobial peptides possess high concentrations of lysine and arginine amino acid residues, which are protonated and positively-charged at physiological pH. Herein, we describe the design and synthesis of antimicrobial peptide mimics, using amino acid mimics. N-3-aminopropyl methacrylamide (APMA) and 3-guanidinopropyl methacrylamide (GPMA) monomers mimic the amino acid residues lysine …