Requalification Of Coated Fabrics Using Chemlok 2332 In Place Of Chemlok 233, Daniel Madler

Williams Honors College, Honors Research Projects

Rubber coated fabrics are an essential component in the deicing systems of the aerospace industry. Adhesives cements are applied to a fabric prior to being pressed into a rubber compound that will adhere to the fabric. The resulting fabric maintains the strength of the fabric with the added benefits of elasticity and compatibility from the rubber compound. UTC Aerospace Systems relies on these coated fabrics to create safe deicers for the aerospace industry. Chemlok 233, a now obsolete primer cement, was used extensively in the coated fabrics used by UTC. Materials testing and performance evaluation allowed for a replacement cement, …

Compression Set Improvement Of Thermoplastic Vulcanizates For High Temperature Tubing, Mitchell Valaitis

Williams Honors College, Honors Research Projects

It was hypothesized that increasing the curative level of the fluorocarbon rubber (FKM) used in manufacturing of thermoplastic vulcanizate (TPV) materials would decrease the compression set values of the TPV enough for it to be suitable as a flexible, lightweight alternative to high operating temperature thermoset rubber tubing currently being used for power steering hose. First, promising TPV formulations were identified by varying the polyamide (PA) and FKM used in a Brabender mixer. Four different types of polyamide and four different types of FKM were investigated, with two of the FKM types and one polyamide type identified as being promising. …

Multidimensional Mass Spectrometry Of Chemonic™ Ccg-6 Nonionic Surfactant With Separation By Polarity And Shape, Charles Johnson

Williams Honors College, Honors Research Projects

Chemonic™ CCG-6 surfactant is a water-soluble poly(ethylene glycol) (PEG) conjugated alkyl glyceride emollient. This surfactant exists as a complex mixture of a glycerol cores conjugated with poly(ethylene glycol) branches (PEGylation) that were partially esterified with caprylic (C8) and capric (C10) acids. These may be esterified on one, two, or all three arms of the glyceride. The architecture of the structures in this mixture was studied using multidimensional mass spectrometry (MS). Mass spectrometry was interfaced with ultra-performance liquid chromatography (UPLC) and ion mobility (IM) separation. The mixture was separated by reversed-phase LC, oligomers of the star-branched polymer were separated according to …

Sequence Effects On The Glass Transition Temperature, William Drayer

Williams Honors College, Honors Research Projects

Lithium ion batteries are widely used for the energy needs of portable electronic devices. Unfortunately, current liquid organic solvents used as the electrolytic portion of the battery have low thermal stability, resulting in batteries that may combust upon failure. This flammability can be attributed to the configurational strain in cyclic organic electrolytes. Due to the lack of configurational strain in a flexible polymer chain, designing polymer electrolytes for use in lithium ion batteries may result in a safer battery due to their lower flammability in comparison to traditional liquid organic electrolytes. From the perspective of an electrolytic polymer, lowering the …

Electrospinning Aqueous Solutions Of Poly(Ethylene Oxide) Using A Corona-Type Apparatus, Nicholas Neill

Williams Honors College, Honors Research Projects

The purpose of this project was to evaluate working parameters for the corona spinneret to create electrospun fibers/ fiber mat. This project was set-up using a Box-Behnken design of experiment. The working parameters were investigated by performing the electrospinning process, altering the working conditions, collecting the electrospun fibers. The scope of this project includes three primary operational conditions: distance between the spinneret and the collection plate, the viscosity (weight percent) of PEO in the spinning solution and the weight percent of NaCl in the spinning solution. The distance between the spinneret and the collection plate were varied to 18 cm, …

Effects Of Hofmeister Ions On Gelation Of Gelatin And Pluronic Hydrogels, Eric Britton

Williams Honors College, Honors Research Projects

The purpose of the project was to observe the effects of the Hofmeister series of ions on the gelation of gelatin and Pluronic-127 hydrogels. Hydrogels are semi-solid materials that contain a network of joined molecules through intermolecular interactions which are capable of holding water. Gelatin and Pluronic-127 (PF-127) are thermoreversible, physical crosslinked gels. Gelation occurs when temperature, or other driving forces, reduce the polymer chain solubility until a distinct 2-phase system forms. When aqueous ions are present in solution, they exhibit specific ion effects that have either a stabilizing or destabilizing effect on the solubility of proteins and other polymers. …

Tandem Mass Spectrometry (Ms/Ms) For Determination Of Architecture Of Synthetic Polymers, Shoumik Saha

Williams Honors College, Honors Research Projects

Tandem Mass Spectrometry (MS/MS) was used to determine the architecture of synthetic polymers and they are difluorene-N₃, 3-difluorene-N₃ and VPOSS-3-difluorene. VPOSS materials usually exhibit electrochemical properties and the research was performed to determine their accurate structure and to provide evidence of their proper synthesis. The compounds were mixed with a matrix solution, DCTB, and a silver salt to enable proper protonation. The solvent mixture was on a MALDI plate and then put into the mass spectrometer. The mass spectrum generated was analyzed and each fragment was identified to structures with the synthetic polymers via ChemDraw. Thus, trial …

Correlation Of Electrospun Polyvinylpyrrolidone Fiber Mat Thickness With Basis Weight, Fiber Diameter, Pore Size Distribution, And Air Permeability, Leah Mcpherson

Williams Honors College, Honors Research Projects

This project developed correlations between electrospun polyvinylpyrrolidone fiber mat thickness, basis weight, fiber diameter, pore size, and air permeability. The hypotheses were thinner fibers produce thicker mats, pore size decreases with fiber diameter, pore size and permeability decrease as basis weight increases. Project results could be used for modeling or quality control purposes.

Fiber diameter distributions were analyzed using a Scanning Electron Microscope and FibraQuant 1.3 software. Four conditions were chosen for further study: 0.284 ± 0.104 µm, 0.379 ± 0.128 µm, 0.520 ± 0.138 µm, and 0.733 ± 0.177 µm. Lower PVP concentrations produced thinner fibers.

Sample thickness (nm) …

Modeling The Effect Thickener Structure Has On The Oil Release Of Grease, Dana Cressman

Williams Honors College, Honors Research Projects

Our hypothesis was that the thickener type and micelle concentration of grease affected its viscoelastic properties. Measurements were made using a TA AR G2 rheometer and calculations were made using TA rheometer analysis software to characterize the viscoelastic response of grease under oscillatory shear and frequency tests. The oscillatory frequency tests determined the critical micelle concentration. The oscillatory stress tests were taken at temperatures from 5 to 65 degrees Celsius to create a master curve based on time temperature superposition of the measurements. The crossover points of G’ and G” on the oscillatory stress tests demonstrated where the grease transitions …

Design Of Rubber Extraction Process From Tks Dandelion, Trevor A. Cody

Williams Honors College, Honors Research Projects

A design was developed for a controlled environment agriculture 3D greenhouse to grow and harvest TKS dandelions, as well as a processing plant to extract natural rubber and inulin from the roots. The design capacity was scaled for both pilot- and full-scale production: 100 and 100,000 tonnes of natural rubber per year, respectively. The byproducts of the process were dandelion greens, inulin, cellulose, and glucose; all of these except for cellulose were able to be valorized. The greenhouse was designed based on existing 3D hydroponic growing environments, and the extraction process was designed based on the original TKS dandelion extraction …

Design Of Natural Rubber Extraction From Tks Dandelion, Jehad S. Alrawajfeh, Trevor Cody, Jason Pogozelski

Williams Honors College, Honors Research Projects

A design was developed for a controlled environment agriculture 3D greenhouse to grow and harvest TKS dandelions, as well as a processing plant to extract natural rubber and inulin from the roots. The design capacity was scaled for both pilot- and full-scale production: 100 and 100,000 tonnes of natural rubber per year, respectively. The byproducts of the process were dandelion greens, inulin, cellulose, and glucose; all of these except for cellulose were able to be valorized. The greenhouse was designed based on existing 3D hydroponic growing environments, and the extraction process was designed based on the original TKS dandelion extraction …

Characterization Of Polyurethane For Use As Substrate In Nanofiber Sensor For Biomedical Applications, Megan Theaker

Williams Honors College, Honors Research Projects

The purpose of this project is to begin to determine properties of polymer nanocomposites that make a suitable substrate for nanofiber sensors. In this work, sensitivity of a sodium ion selective sensor constructed with polyurethane was used as a benchmark for comparison with sensors constructed with nylon-6. The sensors were characterized using contact angle and chronoamperometry. Using an ANOVA analysis, the results showed that the multi-walled carbon nanotube type was a significant factor on sensor response both with and without additional functionalization of the polymer by calixarene. The weight percentage of polyurethane in the electrospinning solution was also statistically significant …

Stability And Retention Enhancement Of Low Fouling Polystyrene Sulfonic Acid (Pss) And Polyethylene Glycol (Peg) Blend Films With Silane Coupling Agents, Sean Stybel

Williams Honors College, Honors Research Projects

The goal of this research project was to apply silane coupling agents for enhanced stability and retention of a low fouling polymeric coating to an inorganic substrate. A blend of polystyrene sulfonic acid (PSS) and polyethylene glycol (PEG) was crosslinked in order to create a low fouling film. The film was prepared by spin coating a PSS-PEG solution on an inorganic substrate coated with a layer of a silane coupling agent (3-aminopropyltriethoxysilane, APTES, solution), followed by thermal curing. The research was limited to less than one year and only used lab equipment available at the University of Akron. Stability and …

Separation Of Water From Ulsd Using Superhydrophobic Ps Nanofiber Mats, Alisa G. Webel

Williams Honors College, Honors Research Projects

Superhydrophobic polystyrene nanofiber membranes have potential to separate micron scale water droplets from organic due to their hydrophobicity and small pore openings. Polystyrene nanofibers were electrospun into flat sheets and cylindrical filter membranes. The fibers were crosslinked to increase strength and reduce solubility in diesel fuel. The filters were tested and the filtration efficiency was compared to their non-crosslinked counterparts. The optimal electrospinning conditions to create superhydrophobic nanofibers were found to be 20 wt. % PS fibers at 1 mL/hr. under a current of 20kV and at a distance of 20 cm away from the ground. It was found that …

Construction Of Polyurethane Fabric Nanocomposites For Use In Resistance Temperature Detectors-Effect Of Polyurethane Concentration, Multi-Walled Carbon Nanotubes, And Oxidant, Jordan M. Shaffer

Williams Honors College, Honors Research Projects

Current resistance temperature detectors (RTDs) are rigid and create pressure points when used in contact with the human body. The current RTDs can also not be used in confined areas like the inside of a prosthetic. The research done for this paper explores the possibility of creating a soft fabric like RTD that can accurately measure temperature. This RTD could be used in medical devices, be placed in prosthetic legs, and be worn for a long period of time creating no discomfort for the user. Polyurethane scaffolds were created through an electrospinning process and multiwalled carbon nanotubes were adhered to …

Bio-Inspired Structural Colors Produced Via Self-Assembly Of Synthetic Melanin Nanoparticles, Ming Xiao, Yiwen Li, Michael C. Allen, Dimitri D. Deheyn, Xiujun Yue, Jiuzhou Zhao, Nathan C. Gianneschi, Matthew D. Shawkey, Ali Dhinojwala

Polymer Science Faculty Research

Structural colors arising from interactions of light with submicron scale periodic structures have been found in many species across all taxa, serving multiple biological functions including sexual signaling, camouflage, and aposematism. Directly inspired by the extensive use of self-assembled melanosomes to produce colors in avian feathers, we set out to synthesize and assemble polydopamine-based synthetic melanin nanoparticles in an effort to fabricate colored films. We have quantitatively demonstrated that synthetic melanin nanoparticles have a high refractive index and broad absorption spanning across the UV–visible range, similar to natural melanins. Utilizing a thin-film interference model, we demonstrated the coloration mechanism of …

Effects Of Magnetic Nanoparticles And External Magnetostatic Field On The Bulk Heterojunction Polymer Solar Cells, Kai Wang, Chao Yi, Chang Liu, Xiaowen Hu, Steven Chuang, Xiong Gong

Polymer Science Faculty Research

The price of energy to separate tightly bound electron-hole pair (or charge-transfer state) and extract freely movable charges from low-mobility materials represents fundamental losses for many low-cost photovoltaic devices. In bulk heterojunction (BHJ) polymer solar cells (PSCs), approximately 50% of the total efficiency lost among all energy loss pathways is due to the photogenerated charge carrier recombination within PSCs and low charge carrier mobility of disordered organic materials. To address these issues, we introduce magnetic nanoparticles (MNPs) and orientate these MNPS within BHJ composite by an external magnetostatic field. Over 50% enhanced efficiency was observed from BHJ PSCs incorporated with …

Electrospinning Of S-B-S Triblock And S-I-S Triblock Copolymers For Use In Fuel Filtration, Kevin Houser

Williams Honors College, Honors Research Projects

The following research project looked into the potential of using nanofibers of syrene-isoprene-styrene triblock copolymer produced through the electrospinning process for the filtration of water out of fuel as well as a comparison of styrene-isoprene-styrene triblock to the styrene-butadiene-styrene triblock nanofibers produced at equivalent operating parameters. Based on the work completed, it is concluded that the styrene-isoprene-styrene triblock is not suitable for use in filtration with the current electrospinning conditions. On average, the styrene-isoprene-styrene triblock produced nanofibers of lower average diameter and lower standard deviation in diameter when compared to styene-butadiene-styrene triblock.

Optimization Of Polydopamine Coatings, Helen C. Terrill Ms.

Williams Honors College, Honors Research Projects

Polydopamine coatings were fabricated onto the surfaces of glass slides, silicon wafers, and Teflon pieces. A method to change surface properties was optimized, providing a new way of using substrates by means of make-over surface properties. The technology has a wide range of potential approaches including high performance coatings and biomedical surfaces. The experiments can be conducted with various types of surface modifications to make surfaces hydrophilic, hydrophobic, conductive, or magnetic. The changes of film thickness and surface energy as functions of incubation time were quantified by means of ellipsometry, profilometry, and contact angle measurements. The use of primer polydopamine …

Nylon-6 Fabric Nanocomposite Resistance Temperature Detectors - Effects Of Oxidant, Mwcnt, And Nylon-6 Concentration, Rebecca Howdyshell

Williams Honors College, Honors Research Projects

Abstract

The purpose of this honors project is to construct and test temperature detectors, which can be used for the advancement of exercise devices, prosthetic sockets, or medical applications. Resistance Temperature Detectors (RTDs) are an effective way to measure temperature due to the dependence of the RTD material’s resistance on temperature. The focus of this project was to develop an RTD for prosthetic socket or exercise applications, where the RTD is in close contact with the skin of the user. Generally, RTDs are constructed from platinum, copper, or nickel. However, metal RTDs have a tendency to be large and rigid, …

Did Mineral Surface Chemistry And Toxicity Contribute To Evolution Of Microbial Extracellular Polymeric Substances?, Jie Xu, Jay M. Campbell, Nianli Zhang, William J. Hickey, Nita Sahai

College of Polymer Science and Polymer Engineering

Modern ecological niches are teeming with an astonishing diversity of microbial life in biofilms closely associated with mineral surfaces, which highlights the remarkable success of microorganisms in conquering the challenges and capitalizing on the benefits presented by the mineral-water interface. Biofilm formation capability likely evolved on early Earth because biofilms provide crucial cell survival functions. The potential toxicity of mineral surfaces toward cells and the complexities of the mineral-water-cell interface in determining the toxicity mechanisms, however, have not been fully appreciated. Here, we report a previously unrecognized role for extracellular polymeric substances (EPS), which form biofilms in shielding cells against …

Clay Minerals For Nanocomposites And Biotechnology: Surface Modification, Dynamics And Responses To Stimuli, Hendrik Heinz

College of Polymer Science and Polymer Engineering

Clay minerals find a wide range of application in composites, paints, drilling liquids, cosmetics, and medicine. This article reviews chemical and physical properties of natural and organically modified clay minerals to understand the nanometre-scale structure, surface characteristics, and application in functional materials. The relation between fundamental properties and materials design is emphasized and illustrated by examples. The discussion comprises the following: an overview; surface structure and cation density; solubility and solubility reversal by surface modification; the degree of covalent and ionic bonding represented by atomic charges; the distribution of metal substitution sites; measurements and simulations of interfacial properties at the …

Temperature Dependent Droplet Impact Dynamics On Flat And Textured Surfaces, Azar Alizadeh, Vaibhav Bahadur, Sheng Zhong, Wen Shang, Ri Li, James Ruud, Masako Yamada, Liehui Ge, Ali Dhinojwala, Manohar Sohal

College of Polymer Science and Polymer Engineering

Droplet impact dynamics determines the performance of surfaces used in many applications such as anti-icing, condensation, boiling, and heat transfer. We study impact dynamics of water droplets on surfaces with chemistry/texture ranging from hydrophilic to superhydrophobic and across a temperature range spanning below freezing to near boiling conditions. Droplet retraction shows very strong temperature dependence especially on hydrophilic surfaces; it is seen that lower substrate temperatures lead to lesser retraction. Physics-based analyses show that the increased viscosity associated with lower temperatures combined with an increased work of adhesion can explain the decreased retraction. The present findings serve as a starting …

Effect Of Surface Freezing On Meniscus Relaxation In Side Chain Comb Polymers, Shishir Prasad, Zhang Jiang, Michael Sprung, Sunil K. Sinha, Ali Dhinojwala

College of Polymer Science and Polymer Engineering

We have observed a sharp slowing down of the relaxation of the liquid meniscus for polydn-alkyl acrylate) at temperatures where there are no abrupt changes in bulk viscosity or surface tension. This slowing down is due to the formation of a surface-ordered monolayer above the bulk melting temperatures. X-ray photon correlation spectroscopy measurements reveal that the surface capillary fluctuations are also significantly slower due to the formation of the ordered monolayer for film thicknesses comparable to that of the precursor films. The slowing down of the precursor film dynamics is responsible for slower meniscus relaxation below the surface ordering transition …

Exploring Stress Overshoot Phenomenon Upon Startup Deformation Of Entangled Linear Polymeric Liquids, Yangyang Wang, Shi-Qing Wang

College of Polymer Science and Polymer Engineering

This work explores the picture associated with stress overshoot during sudden continual (i.e., startup) external deformation of entangled polymeric liquids and proposes a specific scaling form to depict the intermolecular interactions responsible for chain deformation. Following a previously proposed idea that the stress overshoot in startup deformation is a signature of yielding, we search for ingredients that should go into the description of the force imbalance at the yield point and show that the expression for the intermolecular locking force f(iml), derived from the characteristics associated with the yield point, can be tested against experiment. New rate-switching experiments support the …

Nature Of Steady Flow In Entangled Fluids Revealed By Superimposed Small Amplitude Oscillatory Shear, Pouyan E. Boukany, Shi-Qing Wang

College of Polymer Science and Polymer Engineering

We carry out a systematic investigation into steady-state shear behavior of six entangled solutions based on a superposition of continuous shear and small amplitude oscillatory shear (SAOS). During steady shear in the shear thinning regime, the superimposed SAOS frequency sweep measurements reveal characteristics of viscous liquids, e. g., terminal dynamics, on the experimental time scale of the reciprocal shear rate. The residual entanglement network retains the same level of elastic stiffness as the equilibrium system does. Consistent with the convective constraint release idea, chains in the network are forced to pass around each other as they must do so to …

Nonlinearity In Large Amplitude Oscillatory Shear (Laos) Of Different Viscoelastic Materials, Xin Li, Shi-Qing Wang, Xiaorong Wang

College of Polymer Science and Polymer Engineering

The present work investigates nonlinear behavior in large amplitude oscillatory shear (LAOS) of four different polymeric materials using simultaneous conventional rheometric measurements and particle-tracking velocimetric observations. In contrast to most studies in the literature that treat nonlinearity in LAOS in steady state, we emphasize by the present four examples that nonlinearity in LAOS often arise in complex fluids due to time-dependent rearrangement of their microstructures in response to LAOS. Consequently, no correlation is obvious between strain dependence of the steady-state stress response and the time-dependent characteristics of the steady-state response. For instance, a highly viscoelastic material made of nano-sized polybutadiene …

Electrospinning Route For The Fabrication Of P-N Junction Using Nanofiber Yarns, A. F. Lotus, S. Bhargava, E. T. Bender, E. A. Evans, R. D. Ramsier, Darrell Hyson Reneker, G. G. Chase

College of Polymer Science and Polymer Engineering

Electrospinning is a simple, versatile, and cost effective method for generating nanoscale fibers, wires, and tubes. Nanowires and nanotubes could be important building blocks for nanoscale electronics, optoelectronics, and sensors as they can function as miniaturized devices as well as electrical interconnects. We report on a simple method to fabricate free standing ceramic nanofiber heterostructures, which exhibit rectifying behavior of a p-n junction.

Nonlinear-Optical Studies Of A Fluorinated Poled Polyimide Guest-Host System, S. F. Hubbard, K. D. Singer, F. Li, Stephen Z. D. Cheng, F. W. Harris

College of Polymer Science and Polymer Engineering

We report on poling of a low dielectric constant preimidized fluorinated fully aromatic guest-host polyimide nonlinear optical material including thermal stability of optical nonlinearities and waveguiding properties. We measured a second-harmonic coefficient (d33 = 4.9 +/- 0.5 pm/V at 1217 nm fundamental wavelength) which is accurately predicted by a thermodynamic model of poled polymers. The optical nonlinearity of a poled sample was thermally stable at 80-degrees-C for over 300 h. Films were observed to have negative birefringence. Optical losses for slab waveguides in lowest order TE and TM modes were greater-than-or-equal-to 7.7 dB/cm for doped waveguides at 800 nm wavelength …

Universal Scaling Behavior In Startup Shear Of Entangled Linear Polymer Melts, Pouyan E. Boukany, Shi-Qing Wang, Xiaorong Wang

College of Polymer Science and Polymer Engineering

We have studied stress overshoot behavior in startup shear of four monodisperse polymer melts with a range of chain entanglement from Z = 24 to 160 entanglement points per chain. In the elastic deformation regime defined by (gamma)over dot tau(R) > 1 where tau(R) is the Rouse relaxation time, (i) the peak shear stress sigma(max) scales with the time t(max) at the peak to -1/2 power, in contrast to an exponent of -1/4 in the viscoelastic regime (for (gamma)over dot tau(R) < 1), (ii) sigma(max) changes linearly with the elapsed strain at the stress peak gamma(max), which scales with the applied shear rate as (gamma)over dot(1/3), (iii) a supermaster curve collapses time-dependent shear stress growth curves up to the stress maximum at all shear rates for all the four styrene-butadiene rubber samples. (C) 2009 The Society of Rheology. [DOI: 10.1122/1.3086872]