Polymer Science Commons^™

Experimental Evaluation Of Membranes In The Recovery Of Hydrogen From Serpentinization, Rafael Dos Santos

LSU Master's Theses

Natural hydrogen generated through serpentinization reactions has emerged as a promising low-carbon energy resource. However, serpentinization-derived gas streams commonly contain methane (CH₄) and carbon dioxide (CO₂), requiring purification before hydrogen can be utilized in industrial applications. Membrane-based gas separation technologies offer a potentially cost-effective solution for hydrogen recovery; however, to the best of the author's knowledge, no previous studies have specifically investigated their application to serpentinization-derived gas streams.

This work evaluates the performance of two commercial polymeric membrane modules (Evonik and Generon) and one palladium-copper (Pd-Cu) membrane module (Okaya) for hydrogen recovery from gas compositions representative of serpentinization environments. An …

Strengthening Kidney Dialysis One Membrane At A Time: Enhancing Tempo-Oxidized Nanocellulose And Ionic Liquid Membrane Strength Through The Variation Of Cosolvents, Bailey M. Butler

Chemical Engineering Undergraduate Honors Theses

Chronic kidney disease occurs when the kidneys lose the ability to effectively filter the blood, which causes waste build up. End-stage kidney disease (ESKD) is the most severe case of kidney disease and requires either dialysis or a kidney transplant. Hemodialysis, the most common form of dialysis, is an extremely time-intensive and physically burdensome process that is currently limited by membrane performance. The polysulfone (PSf) membranes that are widely used for dialysis today have many limitations, including fouling, toxin rejection, and essential protein loss. Recently, new membranes made from TEMPO-Oxidized nanocellulose dissolved in 1-ethyl-3-methylimidazolium acetate (EMIM-Ac) have shown promising characteristics, …

Polymer Charge Effects On Scaling In Membrane Distillation, Lucia Milans Del Bosch

Chemical Engineering Undergraduate Honors Theses

This research evaluates the effectiveness of polymeric inhibitors at suppressing scaling during direct contact membrane distillation (DCMD). Anionic polyacrylic acid (PAA), neutral polyethylene glycol (PEG), and cationic polyethyleneimine (PEI), were investigated. Experiments were conducted using both hypersaline single-salt and multi-component mixed-salt feeds to determine how the presence of different ions influences performance. Results from single-salt experiments showed that PAA and PEG effectively maintained permeate flux through chelation and steric hindrance, respectively, while PEI caused rapid membrane failure due to interfacial aggregation and pore wetting. In complex mixed-salt solutions, PEG was the additive, maintaining a steady flux with only a 7.33% …

Purifying Circular Rna Therapeutics, Karen Guillen-Cuevas

All Dissertations

Circular RNA (circRNA) has emerged as a promising therapeutic modality due to its enhanced stability and resistance to exonuclease degradation compared with linear mRNA. However, its stability and functionality depend strongly on achieving high purity, and current methods such as size-exclusion chromatography suffer from peak overlap, low yields, and poor scalability. This dissertation addresses these limitations by developing ultrafiltration-based strategies to purify circRNA directly from in vitro transcription (IVT) and self-splicing (circularization) reactions. First, the feasibility of ultrafiltration was demonstrated using polyethersulfone membranes, where sieving coefficients and critical flux values of circRNA, precursor RNA, and nicked RNA were measured to …

Superhydrophobic Cerium-Based Metal–Organic Frameworks/Polymer Nanofibers For Water Treatment, Samar A. Salim, Hani Nasser Abdelhamid,

Nanotechnology Research Centre

No abstract provided.

Design And Characterization Of Lignin-Based, Thermoresponsive Soft Composites With Improved Mechanical And Transport Properties, Missoury D. Wolff

All Dissertations

In an attempt to reduce reliance on petroleum-based polymers, lignin – an abundant biopolymer – has gained popularity as a sustainable alternative. However, research on lignin-containing soft composites – i.e., hydrogel (bio)composites – has largely been heuristic, providing limited insight into the fundamental structure-processing-property relationships that govern performance improvements in this emerging class of ‘green’ soft composites. As such, this dissertation presents a systematic investigation of how lignin molecular weight (MW), composite composition, and the concentrations of crosslinker and accelerator impact the mechanical and transport characteristics of soft composites composed of lignin, poly(N-isopropylacrylamide) (PNIPAm), and poly(vinyl alcohol) (PVA).

In the …

Modern Ir-Spectroscopic Methods For The Analysis Of Hydroxybenzene-Methanal Resin Obtained On The Basis Of 2,5-Furandion, Sherali Anvarovich Umarov, Ravshan Israilovich Ismailov Ismailov

Technical science and innovation

The chemical changes occurring during the synthesis of hydroxybenzene-methanal resins obtained on the basis of 2,5-furandion under various ratios and temperature conditions were investigated using the IR spectroscopic method. Analysis of the compositional changes in the resin during the production of the thermoreactive resin revealed that the content of hydroxyl groups (~3300–3500 cm⁻¹) decreased, while the aldehyde groups (~1700–1750 cm⁻¹) increased; moreover, the presence of ether groups (~1050–1150 cm⁻¹) indicated that the process was successful. The synthesis of resins based on thermoreactive hydroxybenzene-methanal resins was carried out at high temperatures (70°C, 80°C, 95°C). During the identification of the functional groups …

Development Of Ex-Situ Accelerated Chemical Stress Test Protocol For Common Anionic Exchange Membrane Chemistries, Michael D. Friend, Michael D. Friend

Master's Theses

The development of sustainably produced hydrogen fuel (“green hydrogen”) is key for the transition to clean energy sources. Green hydrogen is produced via water electrolysis. As with many clean energy sources, one of the major barriers for scaling water electrolysis is cost. A newer category of water electrolysis is Anionic Exchange Membrane (AEM) water electrolysis. AEM electrolysis systems have the potential to cost less as they do not require the expensive precious metal catalysts the current high preforming Proton Exchange Membrane water electrolysis technologies do. However, AEM lifetimes must be long enough to be cost competitive and AEM chemical durability …

Synthesis Of Activated Carbon From Coconut Shell And Recycled Styrofoam Nanofiber For Water Filtration, Rahma Dani, Ismet Ismet, Leni Marlina, Rona Alisya, Muhamad Abel Kirana Aldi, Anggi Ludiansyah, Lintang Auliya Kurdiati, Meutia Kamilatun Nuha Ap Idjan, Agung Mataram, Muhammad Rama Almafie, Ida Sriyanti

Makara Journal of Science

Water pollution affects life sustainability; hence, several efforts have been exerted to overcome this problem. For ex-ample, nanofiber membrane technology is introduced to retain solutes while allowing only water molecules to pass through the system. Therefore, this study aimed to maximize the technology for water filtration using the electrospin-ning method by combining Styrofoam waste-based polymer with activated carbon from coconut shell waste (ACCS). The nanofiber diameter produced ranged from 590 nm to 610 nm with porous characteristics and without beads. The carbon content varied from 68.04% to 69.84%, according to the energy dispersive X-ray measurement, demonstrating the composite’s effectiveness. The …

Voltammetric Determination Of Hydrogen Peroxide At Decorated Palladium Nanoparticles/Poly 1,5- Diaminonaphthalene Modified Carbon-Paste Electrode, Ziad Khalifa, Mohamed Fathi Abo Oura, Magdi Abdelazzem, Ablah Hathoot

Chemical Engineering

In this work, palladium nanoparticles (PdNPs)/p1,5-DAN/ carbon paste electrode (CPE) and p1,5-DAN/CPE sensors have been developed for determination of hydrogen peroxide. Both sensors showed a highly sensitive and selective electrochemical behaviour, which were derived from a large specific area of poly 1,5 DAN and super excellent electroconductibility of PdNPs. PdNPs/p1,5-DAN/CPE exhibited excellent performance over p1,5-DAN/CPE. Thus, it was used for detecting hydrogen peroxide (H2O2) with linear ranges of 0.1 to 250 μM and 0.2 to 300 μM as well as detection limits (S/N= 3) of 1.0 and 5.0 nM for square wave voltammetry (SWV) and cyclic voltammetry (C.V) techniques, respectively. …

Synthesis Of Uv-Blocking Titanium Oxide Films Via Remote-Type Atmospheric Pressure Plasma Cvd, Hayate Endo, Akira Shirakura, Shinya Kudo, Tetsuya Suzuki

Journal of Applied Packaging Research

This study aims to enhance UV resistance in plastics, focusing on polycarbonate (PC) and polypropylene (PP) commonly used in reuseable packaging. Traditional organic UV absorbers face safety and cost challenges, prompting our investigation into alternative methods. We utilized chemical vapor deposition (CVD), specifically Atmospheric Pressure Plasma Enhanced CVD (AP-PE-CVD), to apply titanium oxide (TiO₂) thin films. This innovative approach, using a remote-type AP-PE-CVD technique, enables coating on complex surfaces and 3D objects. The produced TiO2 films, containing over 20% titanium, showed a UV transmittance of 14.5% at 310 nm and effective UV blocking starting at 372 nm. The …

Elucidating The Impact Of Casting Solvent On Vanadium Ion Transport In Solution-Cast Ionomer Biocomposites Containing Lignin, Zhongyu Wang

All Theses

This paper attempts to investigate the influence of solvent choice to the Nafion-lignin proton exchange membranes that used in the vanadium redox flow batteries. The influence of two different solvents: DMF and DMSO were investigated in this paper. Results show that when using DMSO as solvent, Nafion-lignin membranes' vanadium ion cross over can be greatly reduced in comparing with membranes prepared from DMF. Also, membranes prepared from DMSO also show higher water uptake ability and lower ion exchange capacity than the membranes prepared from DMF. This paper has also investigated the influence of lignin type to the membranes. Results show …

Sulfonated Ionomer Composite Membranes For Use In Vanadium Redox Flow Batteries, Xueting Wang

All Dissertations

While vanadium redox flow batteries (VRFBs) have garnered significant attention as a promising scalable energy storage technology, the current membrane material used in this technology, Nafion™, suffers from high cross mixing of vanadium ions in the liquid electrolytes, directly impacting battery performance properties such as the voltage and coulombic efficiencies, as well as resulting in a reduction in the overall battery lifetime. The use of ionomer nancomposites has proven to be one promising route of directly addressing the issue of high ion crossover, though the mechanism by which the nanoparticles act to reduce crossover remains in open question. Herein, the …

Synthesis, Characterization, And Performance Assessment Of Reusable And Biodegradable Antimicrobial Polymeric Membranes For Aerosolized Pathogen Inactivation And Filtration, Ebuka Ogbuoji

Theses and Dissertations--Chemical and Materials Engineering

Air filtration technology has proven effective in purifying air by trapping particulates which can cause adverse health effects. High Efficiency Particulate Air (HEPA) filters, capable of capturing over 99.99% of PM_0.3, are recommended for critical applications. However, conventional non-woven HEPA filters rely on electrostatic interactions to trap smaller particles, which can deplete over time or after cleaning, reducing filtration efficiency and posing health risks. Additionally, these filters contribute to plastic waste.

This dissertation investigated the feasibility of using flat sheet polymeric membranes fabricated via nonsolvent-induced phase separation (NIPS) as reusable and biodegradable alternatives to commercially available non-biodegradable air …

Functionalized Microfiltration Membranes For Aerosol Capture To Chloro-Organic Degradation, Rollie George Mills

Theses and Dissertations--Chemical and Materials Engineering

The environmental remediation of water and air sources is a challenging field, due to widespread contamination, pollutant variety, and efficiency of existing treatment options. Remediation of certain pollutants, such as per- and polyfluorinated chemicals (PFAS), polychlorinated biphenyls (PCBs), volatile organic compounds (VOCs), and viral aerosols, has shown promise via adsorptive, degradative, or filtration-based processes, each with their respective advantages and limitations. Membrane technology is one option that has exhibited considerable pollutant removal from environmental sources via reverse osmosis (RO) filtration, but is limited by low permeabilities and lack of pollutant detoxification. With the support of NIEHS and NSF, the functionalization …

Novel Membrane Materials For Nutrient Recovery From Nutrient-Rich Resources, Km Prottoy Shariar Piash

Graduate Theses, Dissertations, and Problem Reports (ETD)

Global demand for fertilizer production is expanding substantially to meet the food demand of an increasing world population. Anaerobic digestate (AD) of various centralized wastewater facilities contains substantial amounts of ammonium (NH₄⁺) (300-800 mg/L), potassium (K⁺) (13-120 mg/L), and phosphorus (P) (30-100 mg/L)- based nutrients. In addition to reducing energy costs and CO₂ emissions compared to conventional fertilizing raw material manufacturing, recovering nutrients from these waste streams could help mitigate problems such as eutrophication, which otherwise incurs billions of dollars losses to US economy annually. Apart from nutrients, wastewater streams also contain organic pollutants …

Amine-Functionalized Lignin-Based Ionomer Nanocomposites For Redox Flow Batteries, Joshua Wilder

All Theses

As the development of energy storage technologies for renewable energy sources continues to garner attention, vanadium redox flow batteries (VRFBs) have emerged as promising source for grid-scale energy storage. A major component of the VRFB is the ion exchange membrane (IEM), as it serves to physically separate the two liquid electrolytes and also directly impacts the battery’s capacity, efficiency, and cost. The current industry standard IEM, Nafion™, not only accounts for a large portion of the cost of the VRFB but also suffers from poor proton selectivity. Herein, we have synthesized sulfonated poly(ether ether ketone) (SPEEK) composite membranes containing amine …

Removal Of Hexavalent Chromium From Water By Chitosan-Enhanced Ultrafiltration, Putu A. Y. Indiasih, Anindita D. Syaifudin, Nurul Faiqotul Himma, Bambang Ismuyanto

Makara Journal of Technology

Polymer-enhanced ultrafiltration has gained increasing attention as a selective separation process to remove small solutes, such as metal ions, from water or wastewater. Hexavalent chromium Cr(VI) is one of the metal ions in wastewater that has received considerable attention because of its toxicity. Chitosan was used in this study as the polymer to bind Cr(VI) to enhance its removal by ultrafiltration. The effects of chitosan-to-Cr(VI) ratio on Cr(VI) rejection and permeate flux were investigated. In addition, the fouling tendency was evaluated. Results showed that the addition of chitosan with a mass ratio of 12.5 increased the Cr (VI) rejection from …

Beeswax Wraps As An Alternative To Single-Use Plastics, Sarah Skiver

Williams Honors College, Honors Research Projects

The project goal was to compare the food storage efficacy of sustainable beeswax wraps verses the single-use plastic methods of resealable plastic sandwich bags and plastic cling wrap. The goal was also to test the reusability of the beeswax wraps, as it is a key advantage of beeswax wraps that is advertised. The project purpose was to explore sustainable and eco-friendly alternatives to single use plastics, which are harmful to the environment in both their production and their disposal. Food spoilage was compared in beeswax wrap, plastic sandwich bags, and plastic cling wrap, and spoilage was also observed in a …

Application Of The Core Shell Model For Strengthening Polymer Filament Interfaces, Yu-Chung Lin, Aniket Raut, Yiwei Fang, Yifan Yin, David Sprouster, Tai-De Li, Guillaume Freychet, Mikhail Zhernenkov, Steve Nitodas, Jonathan Sokolov, Yuval Shmueli, Miriam Rafailovich

Advanced Science Research Center

While surface segregation has been intensively studied in thin films, relatively little has been investigated in filament geometries. In contrast to thin films, the filament surface forms a continuum, with interactions both at the free air and internal filament interface, which makes it difficult to achieve an equilibrium configuration. This asymmetry has become particularly apparent with the increasing use of additive manufacturing where entire structures are constructed via layered deposition of filamentous layers from a moving thermal nozzle. In addition, this process is highly non-equilibrated with poor thermal retention and is responsible for insufficient filament–filament interfacial fusion and internal pore …

Development Of A New Affinity Membrane For Rapidly Purifying Non-Antibody Proteins, Friendship Edioma

All Theses

This thesis project describes the modification and evaluation of a new affinity membrane for rapid chromatographic purification of non-antibody proteins. The affinity membrane utilizes Im7/CL7 coupling technology developed by Dr. Vassylyev's lab at the University of Alabama Birmingham (UAB), licensed by TriAltus Bioscience. The behavior of the membrane was evaluated using purified CL7-tagged Cas9 as my model protein for static and dynamic binding capacity analysis.

Chapter one provides an overview on biopharmaceutical drug production process development. I discuss how protein drugs are produced, isolated, and purified from the cell supernatant after upstream phases are completed. Despite increasing demands for biologics, …

Reactive Thin Film Polymers And Thin Film Composite Membranes For The Rapid Screening Of Uranium Isotopes, Abenazer W. Darge

All Dissertations

Traditional radiochemistry approaches for the detection of trace-level alpha-emitting radioisotopes in water require lengthy offsite sample preparations and do not lend themselves to rapid quantification. Therefore, a novel platform is needed that combines onsite purification, concentration, and isotopic screening with a fieldable detection system. My dissertation research objective was to develop novel reactive thin polymer films and thin film composite membranes for the selective separation of uranium from environmental water followed by direct isotopic analysis by alpha spectroscopy. Chapter 1 reviews progress made on uranium separation from aqueous matrices and discusses methods used for the determination of isotopic composition.

Chapter …

Isolation And Production Of Tandem Collagen Binding Domain From Clostridial Collagenase Colg And Developments In C1q Reagent Production For Future Molecule Characterization Work, Stephanie Beitle

Chemical Engineering Undergraduate Honors Theses

This thesis covers a two part project: the production methods to create a double collagen binding domain molecule with a growth factor for wound healing applications and the development of a new in-house production method for isolating C1q from bovine blood. The wound healing molecule was created using transformation, sonication, and purification before being tested via electrophoresis SDS page and Western blots to confirm the molecule’s presence. The C1q in-house production method utilizes an ultrafiltration flow cell rather than dialysis at a critical point in the process, allowing for researchers to not only be able to use a single small …

Synthesis And Phase Transition Characterization Of Liquid Crystal Membranes With Slit-Like Pores, Isaac Hopwood

Chemical Engineering Undergraduate Honors Theses

Membranes with slit-like pores have been of interest for some time due to their ability to reject smaller particles than traditional cylindrical-pored membranes at the same fluid flux. However, using liquid crystals as a template for this sort of membrane has not been thoroughly investigated. In this study, the liquid crystal mixture of RM257 (2-Methyl-1,4-phenylene bis(4-(3-(acryloyloxy)propoxy)benzoate)) and 5CB (4-Cyano-4'-pentylbiphenyl) for the purpose of manufacturing membranes with slit-like pores, the phase transition behavior of this LC mixture at various mole fractions of RM257, and the impact of mole fraction of RM257 in the liquid crystal (LC) mixture and membrane manufacturing conditions …

Quantification Of Slit-Like Pores Through Using Liquid Crystals As A Template, Dominique Savage

Chemical Engineering Undergraduate Honors Theses

The purpose of this research is to manufacture a membrane with slit-like pores to achieve particle filtration. Slit-like pore membranes are preferred over conventional membranes with cylindrical pores since slit-like pores have two length scales that can be manipulated to better control cut off and flux through the membrane. This project focuses on manufacturing slit-like pore membranes through the use of two liquid crystals, 1,4-bis[4-(6-acryloyloxyhexyloxy)benzoyloxy]-2-methylbenzene (RM257) and 4-Cyano-4′-pentylbiphenyl (5CB). This method for making slit-like pores has not been widely investigated nor has the morphology of the membrane pores and mechanical properties of such a membrane been addressed. It was found …

Extractive Membranes For The Detection And Screening Of Waterborne Plutonium, James Foster

All Dissertations

The development of rapid screening tools for special nuclear materials remains a crucial focus for nonproliferation efforts. Traditional approaches for the analysis of trace-level Pu isotopes in water requires tedious and time-consuming sample preparation steps that do not lend well to expeditious screening. Therefore, a novel analytical method that combines both Pu concentration and source preparation into a single detection system would make for an invaluable tool for nuclear security applications. Extractive membranes absorbers can help to fulfill this role as they are capable of concentrating Pu to detectable limits while subsequently serving as alpha spectrometry sample sources. In Chapter …

Tuning Electrochemical Interactions And Polymer Electrolyte Interfaces For Enhanced Organic Acid Separations Using Electrodeionization, Matthew Leo Jordan

LSU Doctoral Dissertations

Chemical separations are critical processes for chemical and industrial plants to purify and isolate products however current separation technologies, such as distillation, rely on energy intensive processes. Electrochemical separation processes, such as electrodialysis and electrodeionization, are an energy efficient alternative that are emerging as an alternative for thermal-based separations. Organic acids are weakly ionizable species and susceptible for purification from process streams using electrochemical processes. Recently the fermentation route has garnered greater attention as a means for producing value-added chemicals, such as organic acids, from a renewable feedstock and aiding the circular economy. Some of the challenges electrodialysis faces for …

Amine-Functionalized Interpenetrating Polymer Networks For Co2 Capture, James Wills

Williams Honors College, Honors Research Projects

The research performed looked to advance the studies of vacuum swing absorption of Carbon Dioxide to help combat global climate change issues. The focus of the project was to create an anime-polymer sorbent that will weakly absorb and desorb CO2. The sorbent must be durable and be able to withstand multiple uses. The creation of a porous polymer matrix aided in the amines' ability to absorb CO2. Created samples underwent several qualitative and quantitative tests to determine their usefulness as an industrial sorbent. Infrared spectroscopy was used to study the effectiveness of the amine sorbents. Studying the changes in the …

Water Recovery From Bioreactor Mixed Liquors Using Forward Osmosis With Polyelectrolyte Draw Solutions, Calen Raulerson

All Theses

The objective of this research was to test the feasibility of using forward osmosis (FO) with polyelectrolyte draw solutions to recover water from bioreactor mixed liquors. When combined with an Anaerobic Osmotic Membrane Bioreactor (AnOMBR), such a system could process fecal and food waste from astronauts aboard the International Space Station (ISS) and reclaim important nutrients and water. This project focused on measuring the obtainable water recovery rates from bioreactor effluent, and the identifying challenges associated with the operation.

AnOMBRs feature several advantages over aerobic bioreactors, and non-osmotic anaerobic membrane bioreactors (AnMBR). Anaerobic bioreactors avoid the significant energy costs of …

Phase-Field Modeling Of The Polymer Membrane Formation Process For Micro- And Ultra-Filtration, Michael Rosario Cervellere

Graduate Theses and Dissertations

Porous polymer membrane filters are widely used in separation and filtration process. Micro- and ultra-filtration membranes are commonly used in biopharmaceutical applications such as filtering viruses and separating proteins from a carrier solution. The formation of these membrane filters via phase inversion is a complex and interconnected process where varying casting conditions can have a wide variety of effects on the final membrane morphol- ogy. Tailoring membrane filters for specific performance characteristics is a tedious and time consuming process. The time and length scales of membrane formation make it extremely difficult to experimentally observe membrane formation. Modeling the membrane formation …