Ion-Imprinted Polymer-Based Sensors For Toxic Metal-Ion Detection In Water: Coordination Chemistry, Transduction Strategies, And Environmental Applications, Ghita Yammouri, Gymama Slaughter

Center for Bioelectronics Publications

Toxic metal contamination in aquatic environments remains a persistent threat to human health and ecosystems. Yet, the high cost, infrastructure demands, and centralized nature of conventional analytical methods constrain routine monitoring. Ion-imprinted polymers (IIPs), a subclass of molecularly imprinted polymers, have emerged as promising synthetic recognition materials for metal-ion sensing because they generate coordination-defined binding sites with high selectivity, chemical stability, low cost, and reusability. This review summarizes recent advances in Ion-imprinted polymer (IIP)-based sensing technologies for toxic metal-ion detection in water from 2016 to 2026. It examines the fundamental recognition chemistry of IIPs, major synthesis strategies used to generate …

Removal Of Fluoroquinolones From Water Systems Employing Rice Husk Composited Sponges Via Nanoadsorption, Dalia Kanaa

Theses and Dissertations

A novel nanocomposite of polyvinyl alcohol formaldehyde (PVF) sponge loaded with green zinc oxide nanoparticles (ZnONP) and referred to as (NP-PVF) was fabricated as a potential adsorbent of ciprofloxacin from water. A simple mechanical foaming process was used to synthesize the adsorbent. Rice husk extract was used to synthesize zinc oxide nanoparticles (ZnONP) for its phytochemicals as reducing agents. A facile and low-energy-dependent extraction method was used that did not require the use of high-temperature annealing. The synthesized nanoparticles showed a maximum UV absorption at 347 nm, which corresponds to a 3.58 eV band gap energy. FTIR confirmed the successful …

Polyvinyl Alcohol–Red Cabbage Nanofibers As Ph-Responsive Freshness Sensors For Advanced Food Packaging Technology, Foliatini Foliatini, Singgih Wibowo, Henny Rochaeni, Suhartini Suhartini, Fachrurrazie Fachrurrazie, Arzzaq Imanda Prianditya, Pradnadia Putri Hadriansyah, Naura Athira Putri Siregar, Novi Nurpadilah, Putri Alfiani, Maudi Rahim, Endah Sriwahyuni

Makara Journal of Science

The development of innovative food packaging technologies, particularly those capable of monitoring freshness, has become increasingly important in the food industry. This research explores the development of a pH-responsive freshness sensor using polyvinyl alcohol–red cabbage (PVA/RC) nanofibers. The nanofibers are fabricated through the electrospinning technique and meticulously analyzed via scanning electron microscopy, Fourier-transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). The results underscore the fine structure of the nanofiber matrix, with an average diameter of ~68 nm. FTIR analysis substantiates the presence of anthocyanin compounds from RC within the PVA/RC nanofibers, which confirms the integration of beneficial components into …

Carbon-Based Nanocomposite Membranes For Membrane Distillation: Progress, Problems And Future Prospects, Chhabilal Regmi, Yuwaraj K. Kshetri, S. Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

The development of an ideal membrane for membrane distillation (MD) is of the utmost importance. Enhancing the efficiency of MD by adding nanoparticles to or onto a membrane’s surface has drawn considerable attention from the scientific community. It is crucial to thoroughly examine state-of-the-art nanomaterials-enabled MD membranes with desirable properties, as they greatly enhance the efficiency and reliability of the MD process. This, in turn, opens up opportunities for achieving a sustainable water–energy–environment nexus. By introducing carbon-based nanomaterials into the membrane’s structure, the membrane gains excellent separation abilities, resistance to various feed waters, and a longer lifespan. Additionally, the use …

Optimizing The Expression Of Polyethylene Terephtalate Hydrolase-Encoding Synthetic Gene In Escherichia Coli Arctic Express (De3), Jocelyn Nataniel, Maria Ulfah, Dini Achnafani, Niknik Nurhayati, Gabriela Christy Sabbathini, Sri Rezeki Wulandari, Abinawanto Abinawanto, Is Helianti

Makara Journal of Science

The waste of polyethylene terephthalate (PET) plastic waste in Indonesia is a pressing concern due to its slow degradation and potential environmental damage. One promising solution is to utilize polyethylene terephthalate hydrolase from Ideonella sakaiensis (IsPETase), an enzyme that specifically degrades PET. However, inducing the expression of IsPETase synthetic gene in Escherichia coli BL21 (DE3) has been challenging because much of it remains insoluble. This study aimed to express IsPETase in E. coli Arctic Express (DE3) and optimize the conditions to enhance its production. First, pET22b(+)pelB-IsPETase was inserted into E. coli Arctic Express (DE3). The …

Exploring Natural Raw Materials For The Development Of Hot Melt Adhesives For Linings Of Paintings, Erica Factor

Williams Honors College, Honors Research Projects

Natural raw materials will be explored for developing hot melt adhesives for the lining of paintings. The leading raw material is a natural resin called "Damar". This resin is obtained from the tree family Dipterocaupocea in India and Southeast Asia. This material has shown promising results from initial testing. Damar, with the potential for other natural raw materials, will be combined with synthetic ingredients to create sustainable formulations. The formulations will be tested on linen to replicate the application onto paintings. The sustainability, tackiness, texture, and overall performance of each formula will be considered. Once a formulation has been selected, …

Development Of Non-Viral Nano-Carriers For Gene Delivery And Covid-19 Vaccines, Zhongyu Li

Dissertations

Gene therapy is one of the most promising medical fields with the potential to effectively advance the treatment of difficult diseases by producing therapeutic proteins or repairing defective gene sequences. However, gene therapy presents severe challenges in delivery including renal clearance, phagocytosis, enzymatic degradation, protein absorption, and cellular internalization barriers, which have been barriers for translation into the clinic. Naked nucleic acids, with their intrinsic negative charge, electrostatically repulse the anionic cell membrane, preventing cellular uptake. Also, they are considered foreign genetic material when introduced into the body and are rapidly cleared by the reticuloendothelial system or degraded by nucleases, …

Mimicking The Namib Desert Beetle With Hydrophilic And Hydrophobic Surfaces, Tyler Bracewell

Williams Honors College, Honors Research Projects

The Namib Desert beetle, Stenocara gracilipes, condenses fog that rolls in off the west coast of Namibia to provide itself with the water it needs for the day. By lifting its abdomen into the air to collect the water vapor, it condenses on hydrophilic bumps that are about 500μm in diameter and are spaced apart about 500-1500μm. Once the water reaches a critical size, the droplet rolls off the hydrophilic bump and onto the flat hydrophobic surface of the elytra. Since the beetle is angled with its abdomen in the air, the water rolls down to its mouth. A …

Recovering And Upgrading Kraft Lignin For Application In Flexible Polyurethane Foam, Peng Quan

Dissertations, Master's Theses and Master's Reports

Lignin is the second abundant natural polymer and has been highlighted as a potential substitute for fossil-based raw materials. However, the inherent molecular heterogeneity and the complex recovery processes result in the challenge of controlling the molecular properties and value-added applications of lignin in large scale. To address those issues, a novel acid-liquefaction process was developed in this study to recover Kraft lignin with improved molecular homogeneity directly from black liquor.

In the first study, the liquefaction parameters were screened based on yield and molecular weight properties of the recovered lignin. Then, the recovered lignin samples were used to replace …

Therapeutic Injectable Iron-Chelating Hydrogels, Debbie Campbell-Rance

Theses and Dissertations

ABSTRACT

Therapeutic Injectable Iron-Chelating Hydrogels for Improved Central Nervous System Regeneration

By

Debbie S. Campbell-Rance

A dissertation submitted in partial fulfillment of the requirements of the degree of Doctor of Philosophy at Virginia Commonwealth University 2021.

Director: Xuejun Wen, M.D., Ph.D., AIMBE Fellow, Alice T. and William H. Goodwin Jr. Endowed Chair Professor in Regenerative Medicine, Institute for Engineering and Medicine, Department of Chemical and Life Science Engineering

Severe traumatic brain and spinal cord injuries are major global public health and socioeconomic problems in terms of mortality and morbidity. Currently there are two main lines of treatment under development for …

Development Of Polymeric Cxcr4 Targeting Carriers For Sirna Delivery To Treat Acute Kidney Injury, Weimin Tang

Theses & Dissertations

Acute kidney injury (AKI) is a major kidney disease that is characterized by a sudden loss of renal function which manifests by a decrease in urine output and an increase in serum creatinine. AKI is a global healthcare burden associated with high morbidity, mortality, and increasing cost. Currently there are no effective pharmacological treatments available. Apoptosis induced by p53 has been demonstrated as an important pathological mechanism for the development of AKI. Meanwhile, CXCR4/SDF-1 axis has been associated with the inflammation during AKI, and CXCR4 is overexpressed on injured tubules. This dissertation hypothesized that polycations with CXCR4 targeting ability could …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Tools And Strategies For The Patterning Of Bioactive Molecules And Macromolecules, Daniel J. Valles

Dissertations, Theses, and Capstone Projects

Hypersurface Photolithography (HP) is a printing method for fabricating structures and patterns composed of soft materials bound to solid surfaces and with ~1 micrometer resolution in the x, y, and z dimensions. This platform leverages benign, low intensity light to perform photochemical surface reactions with spatial and temporal control of irradiation, and, as a result, is particularly useful for patterning delicate organic and biological material. In particular, surface- initiated controlled radical polymerizations can be leveraged to create arbitrary polymer and block- copolymer brush patterns. Chapter 1 will review the advances in instrumentation architectures from our group that have made these …

Degumming Of Hemp Fibers Using Combined Microwave Energy And Deep Eutectic Solvent, Bulbul Ahmed

LSU Master's Theses

Hemp is considered as one of the sustainable agricultural fiber materials. Degumming or surface modification of hemp bast is needed to produce single fibers for ensuing textile and industrial applications. The traditional degumming process necessitates a high amount of alkali, which causes detrimental environmental pollution. This study offers a new method to degum hemp fibers with reduced use of harmful alkali and precious water resources. In this work, hemp bast fibers were degummed by using combined microwave energy and deep eutectic solvent (DES). The properties of hemp fibers manufactured by this method were investigated and compared with the traditional alkali …

Mechanisms Of Spontaneous Curvature Inversion In Compressed Graphene Ripples For Energy Harvesting Applications Via Molecular Dynamics Simulations, James M. Mangum, Ferdinand Harerimana, Millicent N. Gikunda, Paul M. Thibado

Physics Faculty Publications and Presentations

Electrically conductive, highly flexible graphene membranes hold great promise for harvesting energy from ambient vibrations. For this study, we built numerous three-dimensional graphene ripples, with each featuring a different amount of compression, and performed molecular dynamics simulations at elevated temperatures. These ripples have a convex cosine shape, then spontaneously invert their curvature to concave. The average time between inversion events increases with compression. We use this to determine how the energy barrier height depends on strain. A typical convex-to-concave curvature inversion process begins when the ripple’s maximum shifts sideways from the normal central position toward the fixed outer edge. The …

High Performance Mixed-Matrix Electrospun Membranes For Ammonium Removal From Wastewaters, Shu-Ting Chen, Sumith Ranil Wickramasinghe, Xianghong Qian

Chemical Engineering Faculty Publications and Presentations

Mixed-matrix electrospun membranes were developed to investigate ammonium removal from low ammonium concentration wastewaters for the first time. Particles derived from the inexpensive zeolite 13X were successfully incorporated into polyethersulfone (PES) matrices. The fabricated mixed-matrix electrospun membranes demonstrate high ammonium removal capacity reaching over 55 mg/g_zeolite, more than 2.5 times higher than the previously fabricated mixed-matrix membranes via non-solvent induced phase inversion. Moreover, the membranes fabricated exhibit high permeability and ease of regeneration. Over 90% of total ammonium nitrogen (TAN) can be removed from low TAN wastewaters such as aquaculture wastewaters. In addition to zeolite 13X, other zeolite …

Development Of Light Actuated Chemical Delivery Platform On A 2-D Array Of Micropore Structure, Hojjat Rostami Azmand, Hojjat Rostami Azmand

Dissertations and Theses

Localized chemical delivery plays an essential role in the fundamental information transfers within biological systems. Thus, the ability to mimic the natural chemical signal modulation would provide significant contributions to understand the functional signaling pathway of biological cells and develop new prosthetic devices for neurological disorders. In this paper, we demonstrate a light-controlled hydrogel platform that can be used for localized chemical delivery in a high spatial resolution. By utilizing the photothermal behavior of graphene-hydrogel composites confined within micron-sized fluidic channels, patterned light illumination creates the parallel and independent actuation of chemical release in a group of fluidic ports. The …

Nature-Inspired Material Strategies Towards Functional Devices, Sayantan Pradhan

Theses and Dissertations

Naturally sourced, renewable biomaterials possess outstanding advantages for a multitude of biomedical applications owing to their biodegradability, biocompatibility, and excellent mechanical properties. Of interest in this dissertation are silk (protein) and chitin (polysaccharide) biopolymers for the fabrication of functional biodevices. One of the major challenges restricting these materials beyond their traditional usage as passive substrate materials is the ability to combine them with high-resolution fabrication techniques. Initial research work is directed towards the fabrication of micropatterned, flexible 2D substrates of silk fibroin and chitin using bench-top photolithographic techniques. Research is focused on imparting electrochemical properties to silk proteins using conducting …

Valorization Of Xylan In Agroforestry Waste Streams, Harrison Appiah

Graduate Theses, Dissertations, and Problem Reports (ETD)

Valorization of Xylan in Agroforestry Waste Streams.

Harrison Appiah

Microwave-assisted deep eutectic solvent and gamma-valerolactone metallic chloride catalyzed conversion of xylan to furfural were investigated using a 2x3 factorial experimental design at two levels of percent microwave power, reaction time, and catalyst concentration. The levels of each factor studied were (20%, 60% microwave power, 2, 4 minutes, and 10, 20mg) respectively. The effect of three metallic chloride catalysts (LiCl, FeCl3.6H20, CuCl2) on the conversion of xylan to furfural was also investigated. The gamma-valerolactone-ferric chloride sent system exhibited the highest mean yield of furfural (56.50%). The next highest furfural yield of …

Gravity-Drawing Flexible Silicone Filaments As Fiber Optics And Model Foldamers, Katherine Snell

CMC Senior Theses

Here, we present a method of gravity-drawing polydimethylsiloxane (PDMS) silicone fibers with application as fiber optics and as model foldamers. Beginning as a viscous liquid, PDMS is cured using heat until its measured viscosity reaches 4000 mPa•s. The semi-cured elastomer is then extruded through a tube furnace to produce thin (diameters on the order of hundred micrometers) filaments with scalable lengths. PDMS is biocompatible, gas-permeable, flexible, and hydrophobic. Additionally, the PDMS surface hydrophobicity can be modified via UV exposure, O2 plasma, and corona discharge. We demonstrate the patternibility (i.e patterns of hydrophobicity) of PDMS fibers, adding complexity to potential foldamer …

Evaluation Of Biodegradability Characteristics Of Cellulose-Based Film As Per Is/Iso 14855-1, Narayan C. Saha Dr, Gaurav Madhu Dr, Diksha B. Kadu Ms

Journal of Applied Packaging Research

Biodegradable polymers (especially those derived from plant sources) begin their lifecycle as renewable resources, usually in the form of starch or cellulose. In this paper, the evaluation of biodegradability of cellulose-based polymer film under controlled composting conditions as per the guidelines of IS/ISO 14855 (Part-1) standard has been described. Microcrystalline cellulose (MCC) powder was taken as positive-control polymer. The apparatus used to analyse the degree and rate of biodegradation was developed indigenously. The validation of the biodegradability testing apparatus was also performed as per the prescribed test method given in IS/ISO 14855-1.

Development Of Starch-Polyvinyl Alcohol (Pva) Biodegradable Film: Effect Of Cross-Linking Agent And Antimicrobials On Film Characteristics, Aniket Satish More, Chandani Sen, Madhusweta Das

Journal of Applied Packaging Research

To satisfy the need of developing eco-friendly flexible antimicrobial packaging film with minimum use of synthetic chemical ingredients, the present study examined the efficacy of citric acid (CA) as cross-linking agent and essential oils (EOs), viz., cinnamon essential oil (CEO) and oregano essential oil (OEO) as natural antimicrobials in corn starch-polyvinyl alcohol (CS-PVA) film. Compared to film prepared from filmogenic solution (FS) containing 75 kg CS+8.75 kg PVA+24.6 kg glycerol per m³ FS, film additionally containing CA at 0.07 kg/kg CS indicated 95% higher ultimate tensile strength (UTS) and 27% lower water vapor permeability (WVP). Film developed with incorporation …

Producing Food Packaging Printing Ink Via Green Emulsion Aggregation Method, Maryam Ataeefard, Shohre Rouhani

Journal of Applied Packaging Research

Digital printing will become more and more important in the packaging industry. Digital printing technology is growing because it allows the print suppliers to improve the level of service they offering to their customers, as well as, it opens new opportunities and helps them to make more money. Additives, dyestuffs, resin and other chemicals in packaging printing ink may influence safety of the food. Therefore, choosing suitable materials are very important in food packing ink. Over the last years, many printing ink manufacturers moved toward more sustainable inks. Drivers for this development, besides the resource scarcity and a higher legislative …

Bio-Inspired Structural Colors Produced Via Self-Assembly Of Synthetic Melanin Nanoparticles, Ming Xiao, Yiwen Li, Michael C. Allen, Dimitri D. Deheyn, Xiujun Yue, Jiuzhou Zhao, Nathan C. Gianneschi, Matthew D. Shawkey, Ali Dhinojwala

Polymer Science Faculty Research

Structural colors arising from interactions of light with submicron scale periodic structures have been found in many species across all taxa, serving multiple biological functions including sexual signaling, camouflage, and aposematism. Directly inspired by the extensive use of self-assembled melanosomes to produce colors in avian feathers, we set out to synthesize and assemble polydopamine-based synthetic melanin nanoparticles in an effort to fabricate colored films. We have quantitatively demonstrated that synthetic melanin nanoparticles have a high refractive index and broad absorption spanning across the UV–visible range, similar to natural melanins. Utilizing a thin-film interference model, we demonstrated the coloration mechanism of …

Inhalable Nanocomposites And Anticancer Agents For Cancer Therapy, Nathanael A. Stocke

Theses and Dissertations--Chemical and Materials Engineering

Cancer is designated as the leading cause of mortality worldwide and lung cancer is responsible for nearly 30% of all cancer related deaths. Over the last few decades mortality rates have only marginally increased and rates of recurrence remain high. These factors, among others, suggest the need for more innovative treatment modalities in lung cancer therapy. Targeted pulmonary delivery is well established for treating pulmonary diseases such as asthma and provides a promising platform for lung cancer therapy. Increasing local deposition of anticancer agents (ACAs) and reducing systemic exposure of these toxic moieties could lead to better therapeutic outcomes and …

Multi-Platform Arabinoxylan Scaffolds As Potential Wound Dressing Materials, Donald C. Aduba Jr

Theses and Dissertations

Biopolymers are becoming more attractive as advanced wound dressings because of their naturally derived origin, abundance, low cost and high compatibility with the wound environment. Arabinoxylan (AX) is a class of polysaccharide polymers derived from cereal grains that are primarily used in food products and cosmetic additives. Its application as a wound dressing material has yet to be realized. In this two-pronged project, arabinoxylan ferulate (AXF) was fabricated into electrospun fibers and gel foams to be evaluated as platforms for wound dressing materials. In the first study, AXF was electrospun with varying amounts of gelatin. In the second study, AXF …

A Soft Condensed Matter Approach Towards Mathematical Modelling Of Mass Transport And Swelling In Food Grains, Michael Chapwanya, N. Misra

Articles

Soft condensed matter (SCM) physics has recently gained importance for a large class of engineering materials. The treatment of food materials from a soft matter perspective, however, is only at the surface and is gaining importance for understanding the complex phenomena and structure of foods. In this work, we present a theoretical treatment of navy beans from a SCM perspective to describe the hydration kinetics. We solve the transport equations within a porous matrix and employ the Flory–Huggin’s equation for polymer–solvent mixture to balance the osmotic pressure. The swelling of the legume seed is modelled as a moving boundary with …

Determining A Method For Rendering Low Cost Cdse(Zns) Core(Shell) Quantum Dots Aqueous Soluble Via Amphiphilic Polymer Wrapping, Patrick Mcbride

Materials Engineering

Herein is described the procedure of two amphiphilic polymer wrapping techniques that may be employed for obtaining aqueous soluble quantum dots (QDs) for use in biological fluorescent imaging applications. The advent of QDs has led to new nanoscale fluorescent materials that exhibit unparalleled quantum yields (QYs), high resistance to photobleaching, tunable emissions, and
absorption over a large optical range. However, the QD synthesis employed here at Cal Poly to obtain bright, photostable CdSe(ZnS) core(shell) QDs involves the use of organic solvents and surfactants, leading to hydrophobic QDs. Since all of biology relies on aqueous solubility, this hydrophobicity creates a major …