Polymer Science Commons^™

Effects Of Hofmeister Ions On Lower Critical Solution Temperatures Of Poly(N-Isopropylacrylamide) And Poly(Vinyl Methyl Ether), Joseph Joaquin

Williams Honors College, Honors Research Projects

The goal of this study is to compare how four different Hofmeister anions (Cl-, SCN-, F-, and I-) affect the Lower Critical Solution temperature (LCST) on two thermo-responsive polymers: poly(N-isopropylacrylamide) (pNIPAAM) and poly(vinyl methyl ether) (PVME). pNIPAAm is commonly used in the environmental applications such as monitoring, oil-water separations, or antifouling materials, and in medical industry from drug delivery to tissue engineering. When pNIPAAM or PVME reaches a temperature above their LCST, they become hydrophobic, and the polymer chains coiled, leading to their aqueous solutions turn opaque. PVME exhibits a similar LCST as that of pNIPAAM, so it can be …

Theoretical And Experimental Investigation Of Liquid-Liquid Phase Separation: Characterizing Elastin-Like-Polypeptides, Adam D. Quintana

Chemical and Biological Engineering ETDs

This dissertation develops and validates a semi-empirical Flory–Huggins-based interaction model, combined with Cahn–Hilliard simulations, for predicting multi-component liquid–liquid phase separation (LLPS) in elastin-like polypeptide (ELP) systems. Equilibrium droplet compositions, measured using a PDMS-based microfluidic device, enabled direct parameterization of interaction coefficients. The model was applied to generate phase diagrams and assess composition dependence in ternary mixtures. Cahn–Hilliard simulations were conducted to explore potential phase morphologies under different interfacial conditions. Multi-component Lattice Boltzmann simulations were implemented to model droplet morphology evolution under varying interfacial and diffusive parameters, reproducing experimentally relevant morphologies. A three-phase wetting study revealed conditions for selective wetting and …

A Comparative Study On Natural Vs. Synthesized Polymers Combined With Silica Nanoparticles To Maximize Secondary Oil Recovery, Attia Attia, Mohamed Sadek Hamedi Al, Waleed Abd-Alsabour Ali Eng., Zeyad Tamer Elshony Eng.

Petroleum Engineering and Gas

Polymer flooding is a well-established technique for enhancing oil recovery from reservoirs. In this study, we investigate the performance of two different polymers, Xanthan Gum, and HPAM for secondary oil recovery in the sand pack. The effects of polymer concentration and high salinity on oil recovery are studied. The polymers are characterized using various measurements and tests, including viscosity, shear rate, and interfacial tension. The sand pack flooding experiments are conducted under various conditions, including varying polymer slugs, and nanosilica (silicon dioxide SiO2) concentration. The results are analyzed to determine the optimal conditions for polymer flooding for enhanced oil recovery. …

Fundamental Study Of Nonlinear Electrophoresis, Joseph Armakan Bentor

All Dissertations

Classical electrophoretic theory describes the linear response of particles suspended in Newtonian fluids under weak electric fields. When the electric field exceeds this weak limit, a nonlinear response arises due to non-uniform surface conduction over the curved particles. This nonlinear behavior introduces dependencies on fluid and particle properties not considered in the classical theory, offering potential advantages for microfluidic particle manipulation. While this phenomenon has been extensively studied theoretically and numerically in Newtonian fluids, experimental investigations have been relatively limited.

Fluid rheology can significantly alter particle dynamics under applied electric fields. Rheological properties like shear-thinning and elasticity which are not …

Characterization Of Tunable And Responsive Functionalized Cellulose Nanofiber (Cnf) Gels With Applications As A 3d Bioprinting Ink, Charles Joseph Jouaneh

Senior Honors Projects

No abstract provided.

Experimental Evaluation Of Mesh Size In Physically Crosslinked Polymer Gels Using Dynamic Light Scattering, Duncan M. Hill

Honors Theses

Block copolymer gels are under consideration as drug delivery patches. Controlling and modeling the transport inside the gel is an important contribution to the successful delivery of pharmaceuticals. The diffusive transport of a solute – such as a therapeutic compound – within the gel can be described by the mesh size of the gel, which is defined as the distance between polymer chains. Existing experimental evaluations of mesh size do not work for block copolymer gels due to differences in the fundamental gel structure. As such, an experimental method of measuring mesh size of block copolymer gels using dynamic light …

Development Of Lignin-Based Copolymers And Polymer Blends, David Chem

Graduate Theses and Dissertations

Increasing industrial interest in reducing fossil fuels in virgin polymer production and incorporating bio-based polymeric materials has led researchers to explore the potential of utilizing plant-based polymers such as lignin. Chapter 1 of this thesis presents a comprehensive overview of copolymerization and blending techniques for lignin and synthetic polymers, emphasizing different types of modifications and copolymerization techniques as well as key parameters such as temperature, reaction time, pH level, and solution compositions. These valorization methods are directed towards the development of high-value lignin-based materials with properties well-suited for various commercial applications. Chapter 2 offers a fundamental exploration into the amination …

Influence Of Metal-Coordinating Comonomers On The Coordination Structure And Binding In Magnetic Poly(Ionic Liquid)S, Kayla Foley, Lucas Condes, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

A poly(ionic liquid) (PIL), poly(acrylamide-co-diallyl dimethylammonium chloride), was systematically complexed with Co²⁺, Fe³⁺, and Co²⁺/Fe³⁺ (mixed) at different molar equivalencies to form a series of magnetic PILs (MPILs). These novel MPILs were utilized to examine molecular structure and binding between the polymer and metal species using comprehensive spectroscopic studies in both dry and liquid states. FTIR, X-ray photoelectron, UV-vis, and Raman spectroscopies showed evidence of metal coordination of both the iron and cobalt chloride species with the acrylamide comonomer. Using AC susceptibility measurements, the MPILs were found to have magnetic properties …

Investigating The Rheological Behavior Of A Simple Yield Stress Fluid Under Shear Flows, Francesco Accetta

Theses

Many soft materials display unique and complex rheological behavior characterized by a transition from a solid-like to a fluid-like state upon the application of a force that exceeds the threshold to flow, known as the yield stress. Yield stress fluids are found in a wide range of commonly encountered materials including microgels, emulsions, and foams, and have been widely studied by rheologists over the last several decades. Carbopol is a popular polymeric microgel system as it displays simple, non-thixotropic rheological behavior and is typically seen as an ideal yield stress fluid. Previous research has demonstrated the reproducible behavior of shear …

The Effect Of Different Fracturing Fluids On The Productivity Of Multi-Staged Fractured Marcellus Shale Horizontal Wells, Vida Gyaubea Matey-Korley

Graduate Theses, Dissertations, and Problem Reports (ETD)

While hydraulic fracturing has undeniably improved the production from oil and gas reservoirs, this technology is not without limitations. The primary hurdles lie in the areas of proppant transport, fluid rheology, and stress management. Despite the extensive research conducted in this domain, there remains a considerable amount of work to be done for comprehensive solutions that account for the complex interactions among fracturing fluid, proppant distribution, and geomechanical conditions. Achieving this will then make room for a holistic and efficient hydraulic fracturing strategy.

This study addresses the above-mentioned problem by examining the impact of fluid type on proppant transport and …

Mechanical And Adhesive Properties Of Supramolecular, Mussel-Inspired Hydrogels, Daniel Darby

Theses and Dissertations--Chemical and Materials Engineering

The exceptional mechanical and adhesive properties of mussel byssal threads come from supramolecular interactions of ligands found in the proteins comprising them. Ligands can form hydrophobic interactions, π-π stacking interactions, and hydrogen bonds, but the strongest supramolecular interaction they demonstrate is metal-ligand coordination. Specifically, Histidine (His-) and nitrodopamine (nDOPA) ligands coordinate to metals in a bidentate fashion and take on tris-, bis-, and mono- modalities (3, 2, or 1 ligand per ion, respectively). The distribution of these modalities is controlled by equilibrium thermodynamics. These same ligands can be used as crosslinks in supramolecular hydrogel networks. Supramolecular hydrogel networks are dissipative, …

Mechanisms Of Emulsion Destabilization: An Investigation Of Surfactant, Stabilizer, And Detergent Based Formulations Using Diffusing Wave Spectroscopy, Jordan N. Nowaczyk

Theses and Dissertations

Conventional approaches for studying emulsions, such as microscopy and macroscopic phase tracking, present challenges when it comes to establishing detailed mechanistic descriptions of the impact of emulsifier and stabilizer additives. Additionally, while a combination of sizing methods and macroscopic phase tracking can provide insights into droplet size changes and concentration, the use of multiple measurements can be cumbersome and error-prone. It is the focus of this work, to present a new method for studying water in oil (W/O) emulsions that involves using diffusing wave spectroscopy (DWS) to examine the impact of three different surface stabilizing additives at varying concentrations. By …

Water Recovery From Bioreactor Mixed Liquors Using Forward Osmosis With Polyelectrolyte Draw Solutions, Calen Raulerson

All Theses

The objective of this research was to test the feasibility of using forward osmosis (FO) with polyelectrolyte draw solutions to recover water from bioreactor mixed liquors. When combined with an Anaerobic Osmotic Membrane Bioreactor (AnOMBR), such a system could process fecal and food waste from astronauts aboard the International Space Station (ISS) and reclaim important nutrients and water. This project focused on measuring the obtainable water recovery rates from bioreactor effluent, and the identifying challenges associated with the operation.

AnOMBRs feature several advantages over aerobic bioreactors, and non-osmotic anaerobic membrane bioreactors (AnMBR). Anaerobic bioreactors avoid the significant energy costs of …

Elucidating The Properties And Mechanism For Cellulose Dissolution In Tetrabutylphosphonium-Based Ionic Liquids Using High Concentrations Of Water, Brad Crawford

Graduate Theses, Dissertations, and Problem Reports (ETD)

The structural, transport, and thermodynamic properties related to cellulose dissolution by tetrabutylphosphonium chloride (TBPCl) and tetrabutylphosphonium hydroxide (TBPH)-water mixtures have been calculated via molecular dynamics simulations. For both ionic liquid (IL)-water solutions, water veins begin to form between the TBPs interlocking arms at 80 mol % water, opening a pathway for the diffusion of the anions, cations, and water. The water veins allow for a diffusion regime shift in the concentration region from 80 to 92.5 mol % water, providing a higher probability of solvent interaction with the dissolving cellulose strand. The hydrogen bonding was compared between small and large …

Effects Of Hofmeister Ions On Gelation Of Gelatin And Pluronic Hydrogels, Eric Britton

Williams Honors College, Honors Research Projects

The purpose of the project was to observe the effects of the Hofmeister series of ions on the gelation of gelatin and Pluronic-127 hydrogels. Hydrogels are semi-solid materials that contain a network of joined molecules through intermolecular interactions which are capable of holding water. Gelatin and Pluronic-127 (PF-127) are thermoreversible, physical crosslinked gels. Gelation occurs when temperature, or other driving forces, reduce the polymer chain solubility until a distinct 2-phase system forms. When aqueous ions are present in solution, they exhibit specific ion effects that have either a stabilizing or destabilizing effect on the solubility of proteins and other polymers. …

Modeling The Effect Thickener Structure Has On The Oil Release Of Grease, Dana Cressman

Williams Honors College, Honors Research Projects

Our hypothesis was that the thickener type and micelle concentration of grease affected its viscoelastic properties. Measurements were made using a TA AR G2 rheometer and calculations were made using TA rheometer analysis software to characterize the viscoelastic response of grease under oscillatory shear and frequency tests. The oscillatory frequency tests determined the critical micelle concentration. The oscillatory stress tests were taken at temperatures from 5 to 65 degrees Celsius to create a master curve based on time temperature superposition of the measurements. The crossover points of G’ and G” on the oscillatory stress tests demonstrated where the grease transitions …

Plasma Processes And Polymers Third Special Issue On Plasma And Cancer, Mounir Laroussi, Annemie Bogaerts, Nazir Barekzi

Electrical & Computer Engineering Faculty Publications

(First paragraph) This issue of Plasma Processes and Polymers is the third in a series on the applications of low temperature plasma (LTP) against cancer, or “plasma oncology.” The papers in this issue are inspired from the talks given at the third International Workshop on Plasma for Cancer Treatment (IWPCT) which took place on April 11–12, 2016 in Washington, DC, USA. IWPCT is an international workshop that was created in 2014 as a venue to share cutting edge plasma oncology research. The first IWPCT was held in Washington DC, under the co-chairmanship of Prof. Mounir Laroussi (Old Dominion University) and …

Microstructure And Rheology Of Carbon Nanotubes At Air-Water Interfaces, Charles D. Young

Honors Scholar Theses

This work characterizes the material properties of carbon nanotubes at air-water interfaces for potential use in creating stable emulsions. Properties such as length, aspect ratio, contact angle, microstructural ordering, surface pressure, compression and shear elastic moduli, stresses, surface viscosities and non-linearity are explored. Challenges such as deviation from a classical analysis of monolayers are encountered in the form of aggregation, mechanical contributions, and interface relaxation. These factors are taken into account to explain experimental measurements and trends. Ultimately, existing models for more homogeneous systems are resolved with observations to offer insight and areas of promise moving forward.

A Soft Condensed Matter Approach Towards Mathematical Modelling Of Mass Transport And Swelling In Food Grains, Michael Chapwanya, N. Misra

Articles

Soft condensed matter (SCM) physics has recently gained importance for a large class of engineering materials. The treatment of food materials from a soft matter perspective, however, is only at the surface and is gaining importance for understanding the complex phenomena and structure of foods. In this work, we present a theoretical treatment of navy beans from a SCM perspective to describe the hydration kinetics. We solve the transport equations within a porous matrix and employ the Flory–Huggin’s equation for polymer–solvent mixture to balance the osmotic pressure. The swelling of the legume seed is modelled as a moving boundary with …