Petroleum Engineering Commons^™

Characterization Of Fracture Initiation In Non-Cylindrical Buckle Folds Using 3d Finite Element Analysis, Eli Jacob Steinbeck

Masters Theses

"The spatial distribution of fracture sets associated with buckle folds has been well documented in field studies. There are difficulties, however, in placing accurate constraints on the timing of the initiation of individual fracture sets during the deformation history of the fold under in-situ conditions. This study investigates specific conditions that give rise to the initiation of various fracture sets in the hinge and limb of a pericline, based on an analysis of the effective stress evolution during the processes of buckling and erosional unloading. A 3D finite element modeling approach is used to simulate the effective stress evolution in …

Fluid Flow Through Deformation Band, Huining Zhang

Masters Theses

"Cataclastic deformation bands, which are common in porous sandstone, have the potential to restrict fluid flow. Geological studies have shown that permeability of deformation band shear zones can be one to five orders of magnitude less than for the sandstone host rock. However, recent studies based on simplified analytical estimates have shown that fluid flow in jointed deformation bands may not be retarded since joints play an important role in conducting fluids. In this study, 2 dimensional finite element analysis (FEA) is used to simulate the total discharge flow rate through jointed deformations. Variations of single planar and conjugate jointed …

Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani

Masters Theses

"Achieving higher recovery of oil from proven carbonate reserves around the world is not an easy task. One promising new method, especially for carbonate reservoirs, is the use of "Smart Water" technology, which is an injection water with carefully determined, optimal ionic composition and salinity. Recent experiments have shown good recovery results, but the mechanism of wettability alteration by this fluid are still not well understood. The goal of this study is to review the high and optimal salinity and ionic composition literature plus perform dimensional analysis of key variables in order to shed light on the physical and chemical …

Exploring Reservoir Connectivity With Production Data: Two New Methods And A New Technique, Ghazwan Faisal Jasim Al-Khmaysawee

Masters Theses

"This study presents two new, simple methods to explore reservoir connectivity, which has a significant impact on field development strategy. Identifying reservoir connectivity during primary depletion plays an important role in achieving the most cost-effective and highest production possible. It is also very important in future secondary and tertiary oil recovery, particularly when costs dictate a limited number of wells such as those in deepwater environments.

The presented methods are reciprocal-productivity index versus total field material-balance time trend lines and reciprocal-productivity index versus time trend lines. Those two methods are quick, simple, inexpensive, and only need rate and pressure data …

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …

Sensitivity Analysis Of Geomechanical Parameters In A Two-Way Coupling Reservoir Simulation, Hector Gabriel Donoso

Masters Theses

"Currently reservoir simulators model geomechanical effects such as compaction, subsidence, fault reactivation, breach of the seal integrity, etc. using only the rock compressibility to change the pore volume. However, rock compressibility as a scalar quantity is unfit to represent the true rock mechanics in the reservoir. In order to accurately represent geomechanical effects in a reservoir simulation, a two-way coupling simulation of the stress analyzer and the reservoir simulator was done. Based on the poroelasticity theory during the production or depletion of the reservoir the porosity and permeability changed due to the stress or pore pressure changes.

A sensitivity analysis …

Impact Of Repeated Cyclic Production Scheme On Eur In Low-Permeability Reservoirs, Samarth Gupte

Masters Theses

"Productivity in low-permeability reservoirs declines quickly compared to conventional reservoirs. These tight reservoirs have very high initial oil production rates but as soon as the oil near the fractured area is recovered, the production declines rapidly making economic oil and gas production a challenge for the industry. This study investigates the impact of repeated shut-in/production cycles on the ultimate recovery of oil in such environments.

A reservoir model with multiple fractured horizontal well having 30 transverse fractures is created using CMG. Reservoir permeability is varied over the range of 0.000001 md to 10 md and shut-in/production cycles of 2-weeks, 1-month, …

Single Phase Gas Flow Response Of Fractured Horizontal And Vertical Wells To Repeated Production, Divya Kandlakunta

Masters Theses

"Historically, the conventional approach to well production has been to produce continuously, minimizing interruptions to flow insofar as possible. Yet some operators have observed improved well flow rates and ultimate recovery after a significant well shut-in periods. These production increases have not been documented. This study investigates the production impact of cyclic production/shut-in on fractured vertical and horizontal gas well performance.

A numerical reservoir model in Stimplan software was used to model production in fracture stimulated vertical and horizontal gas wells. Reservoir permeability is varied over a range of 0.0001 md to 1 md, and the shut-in period was varied …

Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long

Masters Theses

"To improve the oil recovery of mature reservoirs, technologies referring to conformance control have been widely developed and implemented. Among various technologies, preformed particle gel (PPG) treatment has attracted increasing attentions. PPGs, as a kind of deformable plyometric superabsorbent, could be pumped through injection wells as plugging agents to block the fracture or high-permeability zone in a reservoir.

In decade usage of PPGs, an intensively employed material is poly(acrylamide) (PAM) based hydrogel. However, conventional PAM gel did reveal deficient in formidable conditions, such as formations with high temperature and high salinity. Therefore, a novel PPG based on starch-grafting-poly(acrylamide)/nano-composite (SAC) hydrogel …

Computational Fluid Dynamic Analysis In High Permeability Hydraulic Fractured Horizontal Gas Wells, Hrithu Vasudevan

Masters Theses

"Hydraulic fracturing of horizontal wells in unconventional reservoirs has become the dominant type of well completion performed in the United States. In very low permeability reservoirs (~.00001-.0001 mD), the wellbore is aligned with the minimum horizontal stress, and the completion includes multiple transverse fractures. These fractures may be placed with either open hole sleeve type completion systems (OHMS), or cased hole plug and perf systems (P-n-P). In slightly higher permeability reservoirs (1 to 10 mD) multiple longitudinal fractures have been found to be preferred to completions with transverse fractures.

This study presents an evaluation of gas well productivity for both …

Correlation Anaylsis Of Magnesite Dissolution Rate And Magnesite Spatial Distribution, Yao Wang

Masters Theses

"This thesis presents a correlation analysis of the spatial distribution and permeability of magnesite dissolution and focuses on its overall rate and average porosity. Magnesite dissolution is affected by several aspects.

A reservoir's large spatial distribution can make capturing the magnesite dissolution difficult, so in this study, a variogram was built in Petrel using a percentage variation of magnesite and sand. The variogram also handles different major and minor directions in anisotropy. After building the magnesite model, simulation of magnesite dissolution was achieved in Cruch Flow to get the magnesite dissolution rate and average porosity.

For correlation analysis, a regression …

Effect Of Polymer On Disproportionate Permeability Reduction To Gas And Water For Fractured Shales, Lingbo Liu

Masters Theses

"Large volumes of fracturing fluid are required in shale slickwater fracs, and a considerable amount of polymer friction reducer would remain in microfractures if the polymer has not been broken before gas production. It is of major interest to evaluate the effect of polymer on water/gas flow behavior in the microfractures of shale reservoirs. We fabricated six shale fracture models with different fracture widths and set up a core flooding apparatus to conduct brine/gas-injection experiments before and after polymer treatment. A method by which to calculate the residual resistance factor for gas (F_rr,gas) was defined. The experimental results …

Experimental Study Of Crude Oil Emulsion Stability By Surfactants And Nanoparticles, Zainab Alabdulmohsen

Masters Theses

"Surfactants and nanoparticles are materials being widely used for enhanced oil recovery (EOR). Surfactants are mainly used to reduce the interfacial tension between oil and water which could form a stable film of emulsion between these two immiscible fluids. Also, nanotechnology is a potential candidate to offer another solution to improve oil recovery. Nanoparticles can form a solid layer at the droplet's interface and stand as resistant stabilizer under harsh reservoir conditions.

This research investigates whether the combination of surfactants and nanoparticles can provide a more stable emulsion than surfactants only. Two parts of experimental study have been done in …

Evaluation Of Millimeter-Sized Preformed Particle Gel For Conformance Control Treatments Using Simple Models, Ali Abdulmohsen Al Brahim

Masters Theses

Millimeter-sized preformed particle gels (PPGs) have been successfully used to tackle the high-permeable zones, fractures and channels in mature oilfields for conformance control improvement. PPGs can significantly reduce the permeability of abnormal fractures and divert injected water to the low permeable zones where hydrocarbon was not swept by previous water flooding. Due to the irregularity of PPGs in shapes after swollen, their strength cannot be easily measured using the conventional methods. Therefore, the open hole screen plate models with various hole diameters and density were designed to establish a simple technique that can be used to measure the strength of …

Evaluation Of Preformed Particle Gel Treatment Using Homogeneous And Heterogeneous Models, Hilary Ogochukwu Elue

Masters Theses

"This research investigates the effects of preformed particle gel (PPG) in remedying the problems of excess water production and low oil recovery of heterogeneous reservoirs by placing the PPG in the high-permeability layer, thus diverting displacing brine to the unswept low permeability layer. This investigation was completed with three tasks.

The first task was to evaluate the PPG swelling kinetics and strength as a function of concentration of brine. The result of this task indicate that PPG prepared with low concentration of brine swells more, becomes weaker, more deformable than PPG prepared with high concentration of brine.

The second task …

Co₂ Miscible Flooding Application And Screening Criteria, Mingfei Yin

Masters Theses

"Field experience has shown that CO₂ miscible flooding is an effective method to improve oil recovery, but only with proper reservoir candidate selection and optimal project design. This paper discusses both CO₂ miscible and immiscible flooding mechanisms and offers some guidelines for flooding operations. New developments in MMP determination are also introduced.

This research is based on a summary of field data from 134 CO₂ projects in the U.S. Several numerical methods have been applied for data cleaning. After cleaning, data from 128 projects have been analyzed and correlated. Carbonate reservoirs and sandstone reservoirs are the two …

Synthesis Of Different Sizes & Functions Nanoparticles, Jiaming Geng

Masters Theses

"Nanogels, whose size range from 1 to 100nm, have been interested in many research areas: cosmetics, pharmaceuticals, catalysts, photochemistry, and in optical switches or sensors. In Petroleum Engineering area, nanogels can be used as conformance control agent and emulsion stabilizer. And after grafting functional groups or hybrid, nanogels can be used as tracer for the visual modeling.

Though nanoparticles have been studied for more than 20 years, few of them are about nanogels. In the thesis, stirring rate, surfactant type and concentration were found have a large impact on the synthesis of nanogels. And cationic nanogels have salt and acid …

Steam Flooding Screening And Eor Prediction By Using Clustering Algorithm And Data Visualization, Na Zhang

Masters Theses

"Enhanced Oil Recovery (EOR) techniques are vitally important in the oil industry because these techniques could not only extend the life of wells, but also produce 10% to 30% additional oil from the reservoir. However, selecting the most suitable EOR techniques for unknown reservoirs is not easy for decision making. Based on literature, EOR screening criteria could help to find the best candidates for unknown projects, which is classified into two categories: conventional EOR screening and advanced EOR screening. In this research, an artificial intelligent (AI) method, hierarchical clustering algorithm, is adapted to analyze both steam flooding projects and worldwide …

Survey And Data Analysis Of Polymer Flooding Pilot And Field Applications In China, Yandong Zhang

Masters Theses

"Enhanced oil recovery (EOR) processes are regarded as important methods to recovery remaining oil after primary and secondary recovery. It is significant to select the most appropriate EOR process among the possible techniques for a candidate reservoir. EOR screening criteria has been created using available EOR datasets and served as the first step to compare the suitability of each EOR method for a particular reservoir. Most of these datasets are collected from EOR surveys published by Oil & Gas Journal. This study proposes a comprehensive study of a dataset including 55 pilot and field polymer flooding applications in China. Statistical …

Performance Comparison Of Transverse And Longitudinal Fractured Horizontal Wells Over Varied Reservoir Permeability, Fen Yang

Masters Theses

"Since the first application in the mid-1980's, multiple fractured horizontal wells have proven to be an effective means of extracting hydrocarbons. These wells require careful consideration of wellbore orientation relative to the horizontal principle stress. Wellbore orientation can lead to transverse fractures which are perpendicular to the wellbore, or longitudinal fractures parallel the wellbore. Questions arise regarding whether one fracture orientation is consistently preferred over the other, or if certain conditions affect the choice.

Historical work has examined the impact of horizontal wellbore azimuth in the Barnett and Marcellus Shale where public data was reviewed and statistical well analysis was …

The Effect Of Using Different Rock Failure Criteria In Wellbore Stability Analysis, Reza Rahimi

Masters Theses

"Determination of the appropriate drilling fluid density by rock failure analysis is an essential step to control wellbore instability. To determine wellbore failure stresses, the rock strength has to be known, an appropriate constitutive model has to be selected, and finally an accurate rock failure criterion must be chosen. Linear-poro elastic modeling of the mechanical wellbore failure is the most common approach to investigate wellbore instability. Numerous failure criteria have been used for the rock failure analysis but there is not any commonly accepted agreement of which failure criteria to use. Rock failure criteria differ in two main characteristics. First, …

Numerical Simulations For Wellbore Stability And Integrity For Drilling And Completions, Nevan Christopher Himmelberg

Masters Theses

"Conventional wellbore trajectory planning is commonly based on an Andersonian state of stress [SoS] and the optimum well azimuth and inclination for a specific depth can be determined using stereographic projections of the safe mud weight window. In this thesis a new methodology using the complete stress tensor is developed to determine optimal well trajectories for complex in-situ stress scenarios. This study uses a 3D finite element analysis to simulate the SoS based on an integrated 3D MEM. The model yields the complete stress tensor at every location for a planned future well path. Using standard equations to determine the …

Updated Screening Criteria For Steam Flooding Based On Oil Field Projects Data, Mariwan Qadir Hama

Masters Theses

"Enhanced oil recovery (EOR) screening is considered the first step in evaluating potential EOR techniques for candidate reservoirs. Therefore, as new technologies are developed, it is important to update the screening criteria. Many of the screening criteria for steam flooding that have been described in the literature were based on data collected from EOR surveys biennially published in the Oil & Gas Journal. However, these datasets contain some problems, including outliers, missing data, inconsistent data and duplicate data, that could affect the accuracy of the results. Despite the importance of ensuring the quality of a dataset before running analyses, data …

An Analytical Pressure Model To Guide Downhole Sensor Placement For Carbon Dioxide Sequestration Monitoring, Yilin Mao

Masters Theses

"Injecting CO₂ into saline aquifers is currently the most viable approach to mitigate global greenhouse gas effect. Various monitoring techniques are required to achieve 99% accuracy in determining the location of the injected CO₂ plume. Sensor locations are critical to the monitoring quality necessary to meet this requirement but have scarcely been discussed. The pressure profile needs to be modeled accurately at the initial stage of CO₂ injection to guide sensor locations. The objective of this thesis was to develop an analytical solution for CO₂ sequestration based on time and distance. This will guide the locations of downhole pressure sensors …

Studies Of Influencing Factors For Shale Gas Reservoir Performance, Jiaqi Wang

Masters Theses

"Shale gas resource plays a significant role in energy supply worldwide. For economic production of shale gas, technologies of horizontal well and hydraulic fracturing are used for shale gas reservoirs. Therefore, the productivity of the shale gas reservoirs will be influenced by both reservoir condition, and hydraulic fracture properties.

In this thesis, parameters that will influence shale gas production were classified into two categories: reservoir properties and hydraulic fracture properties. Published shale gas simulation studies were surveyed for determining the typical ranges of those properties. CMG-GEM was employed to finish the reservoir simulation work, and CMG-CMOST was used to complete …

Investigation Of Cased Wellbore Integrity In The Wabamun Area Sequestration Project, Benjamin Lee Weideman

Masters Theses

"Loss of cased wellbore integrity can cause many significant problems, including lost production, aquifer contamination, blowouts, and other environmental damage. The objective of this study is to conduct an analysis of the Wabamun Area Sequestration Project (WASP) to determine if wells in that area are suitable for CO₂ sequestration. This was done by conducting laboratory experiments on the common cement compositions found in the area, simulating the various conditions possible in a wellbore, and by analyzing three case studies from the WASP. The cases include two existing production wells and a proposed injection well specifically designed for CO₂ sequestration. This …

Computational Fluid Dynamics (Cfd) Modeling Of Proppant Transport In A Plug-And-Perf Completion With Different Perforation Phasing, Jinlin Zhang

Masters Theses

"Perf-and-plug is a completion technique commonly used in multistage fracturing. Fracture performance modeling assumes that fluid and proppant distributes uniformly among all perforations along the length of the wellbore in a plug and perf completion Crespo et al. (2012) has conducted a limited proppant flow experiment using a 63 foot stage, and three 0.42 inch, zero phased simulated perforations. His work demonstrates proppant does not distribute evenly, but the work is limited to a single perforation scheme.

In this study, Computational Fluid Dynamics (CFD) software has been used to simulate proppant transport and distribution in a single stage of a …

Data Mining And Statistical Analysis Of Completions In The Canadian Montney Formation, Mustafa Adil Al-Alwani

Masters Theses

"This thesis documents a data-mining study and statistical analysis of well completion methods and their impact on production for more than 3300 horizontal wells in the Canadian Montney resource play.

The statistical software JMP is used to analyze well and production data for both horizontal Montney gas and oil wells, examining production trends with changes in completion parameters, such as the type of completion, fluid volume pumped, proppant load, number of fracture stages and completion costs. The analysis also provides a general understanding of average treatment characteristics, and how completions have changed with time for the Montney play.

Among the …

Data Analysis And Summary For Surfactant-Polymer Flooding Based On Oil Field Projects And Laboratory Data, Pratap D. Chauhan

Masters Theses

"Enhanced oil recovery screening is considered as an important first step towards evaluating a potential EOR technique for a candidate reservoir. A vast amount of research is continuously been conducted in EOR. Therefore, it is imperative to update the screening criteria regularly.

This study involves updating the screening criteria for surfactant polymer flooding for field projects dataset and laboratory dataset. Many of the screening criteria for surfactant-polymer flooding in the literature were achieved on the basis of data collected from the EOR surveys published biennially in Oil & Gas Journals. However, these datasets contain problems like missing data and inconsistent …

Influence Of Erosional Unloading On The State Of Stress For Low Amplitude Single-Layer Buckle Folds - Implications For Tensile Fracture Occurrence, Mengke Li

Masters Theses

"The existence of fractures associated to buckle folds is related to the strain distribution of the fold. The erosional unloading process can amplify the remnant strain in the folded layer. Two-dimensional plane strain Finite Element Analysis (FEA) is used to investigate the influence of the erosional unloading step on both the evolution of the state of stress and the associated failure patterns in low amplitude buckle folds. Sensitivity analyses on different input parameters, including viscosity, shortening ratio, and overburden pressure, are performed. Based on the simulation results, tensile stress can be initiated both in the crest and in the limb …