Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Masters Theses

Discipline
Institution
Keyword
Publication Year

Articles 31 - 60 of 153

Full-Text Articles in Petroleum Engineering

Proppant Transport With Varying Injection Points And Its Impact On Proppant Development Inside A Fracture, Shail Janakbhai Soni Jan 2018

Proppant Transport With Varying Injection Points And Its Impact On Proppant Development Inside A Fracture, Shail Janakbhai Soni

Masters Theses

"This study presents experimental work which examines the effect of perforation placement and density on proppant placement within a hydraulic fracture. The study also investigates the effect of proppant angularity.

Experiments were conducted with ceramic proppant injected in a fracture slot model consisting of three injection points at the bottom, middle and top of the fracture slot, and two outlets, at the bottom and top of the fracture model. The effect of single point injection height was investigated by injecting solely at the bottom, middle or top of the apparatus, for both bottom and top outlet conditions. Multiple injection points …


The Role Of Flexural Slip In The Development Of Chevron Folds, Yuxing Wu Jan 2018

The Role Of Flexural Slip In The Development Of Chevron Folds, Yuxing Wu

Masters Theses

"Chevron folds are characterized by straight limbs and narrow hinge zones. One of the conceptual models to initiate and develop chevron folds involves flexural slip during folding. While some kinematical models show the necessity for slip to initiate during chevron folding, recent numerical modeling studies of visco-elastic effective single layer buckle folding have shown that flexural slip does not result in chevron folds. In this study, several 2D finite element analysis models are run, distinguished by 1) geometry of the initial perturbation (sinusoidal and white noise), 2) varying thewavelength of the initial perturbation (10%, 50%, and 100% of the dominant …


Hydraulic Fracture Design Optimization For Nubian Sandstone Formation In Libya, Housameddin Mohamed Sherif Jan 2018

Hydraulic Fracture Design Optimization For Nubian Sandstone Formation In Libya, Housameddin Mohamed Sherif

Masters Theses

There is growing interest in developing unconventional oil and gas reserves in Libya, such as the tight portions of the Nubian sandstone.

Well-X7 is a development well drilled to a TD of 13,005' penetrating the Upper Nubain Sandstone (UNSS) at 12,122'-12,207' and the Lower Nubain Sandstone (LNSS) at 12,524'-12,880' KB. Based on open hole logs, the UNSS has 71 ft of net pay and the LNSS was found to have 295 ft of net pay. Openhole logs also showed low permeabilities of 2.5 and 3 md for the UNSS and LNSS, respectively. The well was initially perforated in both zones …


Preformed Particle Gel Conformance Control Performance In Partially Opened Fracture And Fully Opened Fracture Systems, Ghith Ali Ahmed Biheri Jan 2017

Preformed Particle Gel Conformance Control Performance In Partially Opened Fracture And Fully Opened Fracture Systems, Ghith Ali Ahmed Biheri

Masters Theses

"Conformance problems, such as reservoir heterogeneity can result in a significant decrease in oil recovery, and an excessive water production. Millimeter particle gels (PPG) have been used as conformance control agents to plug open fractures, however, very little research has been conducted to study their ability to plug partially open fractures. This research studies the ability of the PPG to plug partially open fracture to improve conformance and increase recovery in oil reservoirs. Rectangular Sandstone cores were used to conduct the experiments. Fracture widths used include 2, 3.5, 5 mm. For each fracture width, four gel strengths were used; gel …


A Comprehensive Analysis Of Lost Circulation Materials And Treatments With Applications In Basra's Oil Fields, Iraq: Guidelines And Recommendations, Husam Hasan Alkinani Jan 2017

A Comprehensive Analysis Of Lost Circulation Materials And Treatments With Applications In Basra's Oil Fields, Iraq: Guidelines And Recommendations, Husam Hasan Alkinani

Masters Theses

"Lost circulation materials (LCM's) have been widely used to avoid or stop losses. Due to a large number of current available LCM's and their different applications, classification of LCM's is very important. The most recent LCM classification was published around 50 years ago, and this paper intends to fill this gap with an updated classification including conventional and new technologies. Lost circulation materials and treatments are re-classified into various categories based on their appearance, applications, chemical and physical properties.

Wells in Basra's oil fields are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha, and Shuaiba formations. …


Evaluation Of Swelling And Re-Swelling Of Preformed Particle Gels (Ppg) When Exposed To Co₂, Sujay Suresh Jan 2017

Evaluation Of Swelling And Re-Swelling Of Preformed Particle Gels (Ppg) When Exposed To Co₂, Sujay Suresh

Masters Theses

"Long term water/gas flooding induces high permeability channels in reservoirs. Reservoir heterogeneity becomes the most prominent challenge faced in mature oil fields. Gel treatment has been a proven solution to counter the problem of reservoir heterogeneity, to provide in-depth treatment and improve the sweep efficiency for reservoirs. Preformed particle gels (PPGs) were developed as an alternative to in-situ gels as they preferentially penetrate and shutoff high permeability zones, leaving the low permeability zones undamaged. These gels have been predominantly used in water flooding projects, but have not been employed in carbon dioxide (CO2) flooding projects. CO2 Resistant …


Study Of Surface Complexation And Mineral Dissolution During Water-Rock Interaction In High Salinity Waterflooding At Elevated Temperatures, Sameer Salasakar Jan 2017

Study Of Surface Complexation And Mineral Dissolution During Water-Rock Interaction In High Salinity Waterflooding At Elevated Temperatures, Sameer Salasakar

Masters Theses

"High salinity waterflooding for carbonate reservoirs is efficient and cheap method used for improved oil recovery. Various mechanisms have been proposed including adsorption/desorption on rock surface, mineral dissolution and precipitation, multicomponent ion exchange, interfacial tension reduction, fine migration and double layer expansion. These all process alter the wettability which leads to improved oil recovery.

Objective of this study was to understand processes that occur during water-rock interaction when high salinity water is flooded into the reservoir. In this work, effect of temperature on water-rock interaction is studied along with effect of pH and specific surface areas of calcite at normal …


Geomechanical Analysis Of The Wellbore Instability Problems In Nahr Umr Formation Southern Iraq, Haider Qasim Mohammed Jan 2017

Geomechanical Analysis Of The Wellbore Instability Problems In Nahr Umr Formation Southern Iraq, Haider Qasim Mohammed

Masters Theses

"Wellbore instability problems play a major rule of increasing nonproductive time (NPT) during drilling processes. In most cases, the cost of drilling a well can be reduced by designing a suitable operational window using geomechanical models. Several wellbore instability problems have been encountered during drilling Nahr Umr Formation in an oil field in southern Iraq. These problems include but are not limited to, mechanical stuck, caving, and tight holes. Data from twenty vertical wells are investigated to reveal the major factors that control the instability problems and to design an optimum mud window. A geomechanical model is developed to determine …


An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen Jan 2017

An Investigation Of Borax For Sealing Inflow From Berea Sandstone, Tri-Tris Bao Nguyen

Masters Theses

"Well inflow control is a major challenge for the oil and gas industry. Erle Haliburton revolutionized well inflow control with his patent for cementing oil wells in 1921. Soon after, cement became the accepted material to establish well integrity and has been ever since. Cement is used in all phases of the well life cycle, and it is expected to hold indefinitely once set. Yet based on the nature of cement and the placement techniques, flow pathways may develop from improper cementing jobs or from cement degradation over time. Well integrity is especially crucial for wellbore plugging and abandonment, since …


Evaluation Of Preformed Particle Gel As A Diverting Agent For Acidizing, Bo Wei Jan 2017

Evaluation Of Preformed Particle Gel As A Diverting Agent For Acidizing, Bo Wei

Masters Theses

"Preformed particle gels (PPGs) have been developed and successfully used to improve conformance in heterogeneous reservoirs. However, no research has been reported to show their potential diverting applications in acidizing because of their unknown performance in this process. This work targets on evaluating the potential of PPGs to be used as diverting agents and factors influencing the diverting performance.

The swelling properties of three types of PPGs (PPG #1, #2, and #3) were first studied in brine and acid, including the swelling kinetics and equilibrium, PPG strength, and deswelling performance. Effects of different brine concentration, acid concentration, and temperature were …


Overview Of Co₂ Leakage Problems And Sealants For Co₂ Leakage Remediation, Shudai Peng Jan 2017

Overview Of Co₂ Leakage Problems And Sealants For Co₂ Leakage Remediation, Shudai Peng

Masters Theses

"Excessive Carbon Dioxide (CO₂) emission has become a serious issue and caused lots of environmental problems. Carbon Capture and Storage (CCS) program has been developed to reduce the CO₂ content in the atmosphere. CO₂ storage has been targeted mainly on depleted oil or gas reservoirs and deep saline aquifers. However, leakage could occur through wellbores, cap rocks, formation faults, and fractures during and after CO₂ injection. To minimize the risk, different types of sealants have been investigated to prevent CO₂ leaks. The aim of this thesis is to provide a comprehensive review of the materials which could be used as …


Evaluation Of Preformed Particle Gels Penetration And Propagation Behavior For A Conformance Control Treatment In Partially Open Conduits, Ahmed Mohamed Aldalfag Jan 2017

Evaluation Of Preformed Particle Gels Penetration And Propagation Behavior For A Conformance Control Treatment In Partially Open Conduits, Ahmed Mohamed Aldalfag

Masters Theses

"Preformed particle gels (PPGs) serve as a conformance control agent and have been used widely to control excess water production through conduits, fractures or fracture-like features. This research ranks the parameters that impact PPG resistance to water flow in partially opened conduits. Experiments were conducted to examine the effect of brine concentration, PPG injection pressure, back pressure, reducing water salinity and matrix permeability on PPG resistance to water flow through conduits, PPG penetration to the matrix. PPGs were swelled in different concentration brines and were injected into the conduits at a few designed injection pressures. PPG swollen in high brine …


Determination Of Significant Parameters That Drive Fracture Optimization In The Glauconite Formation, Southern Chile, Ghassan Saleh Mahdi Alqatrani Jan 2017

Determination Of Significant Parameters That Drive Fracture Optimization In The Glauconite Formation, Southern Chile, Ghassan Saleh Mahdi Alqatrani

Masters Theses

"The Glauconite Formation in the Magallanes Basin of Southern Chile is a clay- and silica-rich formation with low permeability. As with many of the unconventional resources, the Glauconite Formation requires a hydraulic fracturing operation to enhance the productivity of the wells in this area.

Data and pertinent information of fracturing, completion, and reservoir quality parameters along with post-fracture production data were collected to initiate a database of nearly 70 wells, to be used to develop a better understanding of the fracturing behavior, optimize the well stimulation, and overcome the major barriers in the hydraulic fracturing of the Glauconite Formation. The …


Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia Jan 2017

Deformation Processes At The Leading Edge Of The Sevier Fold And Thrust Belt, Southwest Utah, William Joseph Michael Chandonia

Masters Theses

"Deformation processes leading to formation and abandonment of 'triangle zones' along the leading edge of the Sevier fold and thrust belt are investigated near Kanarraville, Utah through construction of a detailed geologic map and cross-section along Spring Creek. Here the eastern limb of the Kanarra fold, a Sevier structure, is well exposed along the Hurricane Cliffs due to uplift and erosion of the footwall of the Hurricane Fault. The east-verging Kanarra fold changes from upright to overturned within Spring Creek. Within the fold limb, parasitic folds, minor thrust faults, and duplex structures result in local tectonic overthickening of units and …


Effect Of Fracture Heterogeneity On Proppant Transport And Settling Mechanism, Dhurgham Abdulameer Kadhim Jan 2017

Effect Of Fracture Heterogeneity On Proppant Transport And Settling Mechanism, Dhurgham Abdulameer Kadhim

Masters Theses

"Proppant transport modeling through fractures with slickwater fluid systems assumes uniform and homogeneous fracture widths by implying constant fluid behavior at wall boundaries. Hydraulic fracturing mineback operations have demonstrated that induced fractures are heterogeneous and varying in width. This work investigates the impact of fracture width heterogeneity, roughness, and leak-off on ceramic proppant transport and settling, using proppant distribution concepts of Equilibrium Dune Level (EDL) and equilibrium Dune Length (EDX). Experimental work was conducted to investigate the impact of fracture width heterogeneity by varying fracture width along two plexiglass sheets. To mimic actual hydraulic fractures, the injection side was designed …


Quantifying Ceramic Proppant Transport In Complex Fracture Networks, Vivekvardhan Reddy Kesireddy Jan 2017

Quantifying Ceramic Proppant Transport In Complex Fracture Networks, Vivekvardhan Reddy Kesireddy

Masters Theses

"Water fracs have become an essential part of unconventional reservoirs to create deeper fracture networks. Proppant transport in water fracs is challenging in terms of fluids ability to carry the proppant deeper into these fracture networks. This experimental study investigates the impact of the flow rates, fracture widths and complexity controlling the ability of proppant to flow into complex fracture networks. This research attempts to nullify the knowledge gap in understanding width heterogeneity in primary and secondary fractures. This study speaks for settling pattern and proppant transport through a slot flow model with a unique approach to understand stage wise …


Survey And Data Analysis Of Weak Gel Treatments In Injection Wells, Zhuxing Chen Jan 2017

Survey And Data Analysis Of Weak Gel Treatments In Injection Wells, Zhuxing Chen

Masters Theses

"Excessive water production is a major concern in mature reservoirs. Weak gels have been applied in injection wells for in-depth profile modification. However, the data range and distribution of each parameter that affects performance of weak gels have not been studied thoroughly.

China has the largest amount of chemical-based conformance control treatments. This paper presents a summary of comprehensive data ranges and distributions for weak gel treatments based on the laboratory experiments and field applications in China from 2001 to 2010. The data set includes 76 cases compiled from China Academic Journals papers. In this study, reservoir properties, gel properties …


Well Log Interpretation And 3d Reservoir Property Modeling Of Maui-B Field, Taranaki Basin, New Zealand, Aziz Mennan Jan 2017

Well Log Interpretation And 3d Reservoir Property Modeling Of Maui-B Field, Taranaki Basin, New Zealand, Aziz Mennan

Masters Theses

"Maui-B is one of the largest hydrocarbon-producing fields in the Taranaki Basin. Many previous works have estimated reservoir volume. This study uses 3D property modeling, which is one of the most powerful tools to characterize lithology and reservoir fluids distribution through the field. This modeling will help in understanding the reservoir properties and enhancing the production by selecting the best location for future drilling candidates. In this study, 3D seismic, core, and well log data were used to build and define a structural model, facies analysis, and petrophysical parameters. After well log interpretation and petrophysical parameter calculations, each parameter was …


Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang Jan 2016

Evaluation Of Highly Viscous Polymeric Fluids And Recrosslinked Degraded Gel, Danlu Zhang

Masters Theses

”This work presents the evaluations of two products. One can be used for hydraulic fracturing to achieve viscosity stable under high shear rate, and the other is potential to be applied to enhance oil recovery from mature oilfield.

The first experiment is to synthesize and evaluate a new polymeric fracturing fluid that can resist high shear rate of 511-1 with favorable viscosity. Zirconium crosslinked fracturing fluids are lack of self-healing ability after shearing, and the difficulties still exist in maintaining viscous with lower polymer content exposed to high shearing conditions, therefore, the research is trying to develop a new …


A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi Jan 2016

A Comprehensive Study Of Lost Circulation With Application In The South Rumaila Field, Iraq, Abo Taleb Tuama Al-Hameedi

Masters Theses

“Drilling mud losses and problems associated with lost circulation while drilling account for a major expense in drilling oil and gas wells. By industry estimates, more than 2 billion USD is spent annually to combat and mitigate this problem (Ali et al., 2015).

The South Rumaila field in Iraq is one of the largest oilfields in the world. Wells drilled in this field are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha and Shuaiba formations. Lost circulation events range from seepage losses to complete loss of the borehole and are a critical issue in field development. …


Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue Jan 2016

Experimental Evaluations Of Selected Sealants To Remediate Co₂ Leakage, Aaron Jeffrey Blue

Masters Theses

"Carbon Dioxide (CO2) sequestration into porous and permeable brine-filled aquifers is seen as one of the most feasible solutions for reducing the amount of greenhouse gases released into the atmosphere from coal-fired power plants. To safely store the CO2, it must be trapped under an impermeable rock acting as a seal. One of the concerns with CO2 sequestration is the generation of new fractures or reopening of existing fractures caused by CO2 injection in the sealing formation. This project evaluates the potential of sealing these fractures by injecting sealing materials into them. These sealing …


Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang Jan 2016

Variable Stress Orientations In The Offshore Nile Delta: The Role Of Salt As A Mechanical Detachment Horizon, Weicheng Zhang

Masters Theses

"The offshore Nile Delta is characterized by variations of the maximum horizontal stress orientation in subsalt and supra-salt sequences. Margin-parallel SH, typical for tertiary deltas, is observed for regions that are below or do not contain evaporites. In sequences underlain by evaporates pre-dominantly margin-normal SH is observed. This observation yielded the first conclusive in situ evidence that salt acts as a mechanical detachment layer. In this study, 3D finite element analysis (FEA) is used to simulate the total stress distribution in the offshore Nile Delta featuring evaporate sequences. Several parameters such as different salt sequence geometries, friction coefficient on faults, …


Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang Jan 2016

Effect Of Reservoirs Heterogeneity On Injection Pressure And Placement Of Preformed Particle Gel For Conformance Control, Ze Wang

Masters Theses

"Preformed particle gels (PPG) have been successfully applied as a plugging agent for plugging fractures and then divert displacing fluid into poorly swept zones. However, PPG propagation and plugging mechanisms through open fractures have not been studied thoroughly.

This work investigated the influence of some factors (particle size, brine concentration, heterogeneity, and brine salinity) on gel injectivity, plugging performance for water flow through open fractures. Five-foot tubes were used to mimic open fractures. Three models were designed to conduct the work, including (1) single fracture with uniform fracture width, (2) single fracture with different widths, and (3) two parallel fractures …


Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge Jan 2016

Study On The Applicability Of Relative Permeability Modifiers For Water Shutoff Using Numerical Simulation, Dheiaa Khafief Khashan Alfarge

Masters Theses

"Water production is a challenging problem to be controlled during hydrocarbon-reservoirs production life. Disproportionate Permeability Reduction (DPR) is often used as water shutoff treatment in production wells when other conventional solutions like mechanical isolations are difficult to perform. This study applied numerical simulation methods to diagnose the factors impacting DPR treatment success on macroscopic level and to see when, where and at which conditions DPR treatment can give best results.

This work indicated that the following points should be considered before DPR treatment is executed in any reservoir to get a successful treatment. Firstly, this research explored that DPR performance …


Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood Jan 2016

Mitigation Of Wellbore Instability In Deviated Wells By Using Geomechanical Models And Mpd Technique, Husam Raad Abbood

Masters Theses

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe presents a significant wellbore stability problem for deviated wells. In this study, two solutions are utilized to address this problem. The first approach is a 1-D Geomechanical model of the Mishrif formation compiled based on the state of stress and rock strength parameters. It is utilized to assess the contribution of borehole collapse leading to the stuck pipe problems. The results of this study show that wells characterized by stuck pipe are drilled along azimuths which promote wellbore collapse. Three different failure criteria, the …


Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani Jan 2016

Conceptual Parameters Necessary For Modeling Wettability Alteration In An Enhanced Smart Brine-Chalk System, Ahmed Abdulkareem Hussein Albahrani

Masters Theses

"Achieving higher recovery of oil from proven carbonate reserves around the world is not an easy task. One promising new method, especially for carbonate reservoirs, is the use of "Smart Water" technology, which is an injection water with carefully determined, optimal ionic composition and salinity. Recent experiments have shown good recovery results, but the mechanism of wettability alteration by this fluid are still not well understood. The goal of this study is to review the high and optimal salinity and ionic composition literature plus perform dimensional analysis of key variables in order to shed light on the physical and chemical …


An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding Jan 2016

An Investigation Of Plugging And Increasing Oil Recovery In Sandstone Porous Media By Micrometer-Size Particle Gel, Haifeng Ding

Masters Theses

"Micrometer-size particle gel (microgel) has been developed and successfully applied to improve conformance in mature reservoirs. However, quite few researches have been published to address on their effect on oil recovery and rock permeability modification.

This work conducted a series of core flooding experiments to investigate the injectivity, plugging efficiency and improving oil recovery potentials of a couple of microgels synthesized in our lab.

First, this work studied the impact of permeability and crosslinker concentration on PAM type microgel treatment. Results shows that microgel treatment would have a less plugging efficiency in lower permeability rocks, which could be caused by …


Impact Of Repeated Cyclic Production Scheme On Eur In Low-Permeability Reservoirs, Samarth Gupte Jan 2016

Impact Of Repeated Cyclic Production Scheme On Eur In Low-Permeability Reservoirs, Samarth Gupte

Masters Theses

"Productivity in low-permeability reservoirs declines quickly compared to conventional reservoirs. These tight reservoirs have very high initial oil production rates but as soon as the oil near the fractured area is recovered, the production declines rapidly making economic oil and gas production a challenge for the industry. This study investigates the impact of repeated shut-in/production cycles on the ultimate recovery of oil in such environments.

A reservoir model with multiple fractured horizontal well having 30 transverse fractures is created using CMG. Reservoir permeability is varied over the range of 0.000001 md to 10 md and shut-in/production cycles of 2-weeks, 1-month, …


Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long Jan 2016

Study And Development Of Robust Preformed Particle Gels For Conformance Control, Yifu Long

Masters Theses

"To improve the oil recovery of mature reservoirs, technologies referring to conformance control have been widely developed and implemented. Among various technologies, preformed particle gel (PPG) treatment has attracted increasing attentions. PPGs, as a kind of deformable plyometric superabsorbent, could be pumped through injection wells as plugging agents to block the fracture or high-permeability zone in a reservoir.

In decade usage of PPGs, an intensively employed material is poly(acrylamide) (PAM) based hydrogel. However, conventional PAM gel did reveal deficient in formidable conditions, such as formations with high temperature and high salinity. Therefore, a novel PPG based on starch-grafting-poly(acrylamide)/nano-composite (SAC) hydrogel …


Correlation Anaylsis Of Magnesite Dissolution Rate And Magnesite Spatial Distribution, Yao Wang Jan 2016

Correlation Anaylsis Of Magnesite Dissolution Rate And Magnesite Spatial Distribution, Yao Wang

Masters Theses

"This thesis presents a correlation analysis of the spatial distribution and permeability of magnesite dissolution and focuses on its overall rate and average porosity. Magnesite dissolution is affected by several aspects.

A reservoir's large spatial distribution can make capturing the magnesite dissolution difficult, so in this study, a variogram was built in Petrel using a percentage variation of magnesite and sand. The variogram also handles different major and minor directions in anisotropy. After building the magnesite model, simulation of magnesite dissolution was achieved in Cruch Flow to get the magnesite dissolution rate and average porosity.

For correlation analysis, a regression …