Petroleum Engineering Commons^™

Plugging Performance Of Preformed Particle Gels In Fractures And Its Influencing Factors, Ze Wang

Doctoral Dissertations

"Preformed particle gels (PPG) has been successfully applied to combat the water channeling caused by fractures or fracture-like channels. Understanding the placement and plugging of PPG in fractures is crucial for gel treatment design. The objective of the dissertation is to explore the plugging performance of three PPG products in two types of fracture models, the partially and fully open fractures. The following studies has been conducted and conclusions have been drawn based on the results and analysis. First, the placement and plugging performance of conventional PPG was investigated using core flooding experiments conducted partially open fractures. The plugging efficiency …

Building Shared Knowledge For Eor Technologies: Screening Guideline Constructions, Dashboards, And Advanced Data Analysis, Na Zhang

Doctoral Dissertations

"Successful implementation of enhanced oil recovery (EOR) technology requires comprehensive knowledge and experiences based on existing EOR projects. EOR screening guidelines and EOR reservoir analog are served as such knowledge which are considered as the first step for a reservoir engineer to determine the next step techniques to improve the ultimate oil recovery from their assets. The objective of this research work is to provide better assistance for EOR selection by using fundamental statistics methods and machine learning techniques.

In this dissertation, a total of 977 worldwide EOR projects with the most uniformed, high-quality, and comprehensive information were collected from …

Novel Insights Into Low Salinity Water Flooding Enhanced Oil Recovery In Sandstone Reservoirs, Hasan N. Al-Saedi

Doctoral Dissertations

"Ever growing global energy demand and the natural decline in oil production from mature oil fields have been the main incentives to search for methods to increase recovery efficiency for several decades. Water flooding is extensively applied worldwide to improve oil recovery. The recent drop in oil prices has turned the oil industry to the cheapest improved oil recovery (IOR) techniques, such as low salinity (LS) waterflooding. Also, the reduction in reservoir energy and the friendly environmental aspects of low salinity water flooding (LSWF) provide additional incentives for its use. That LS water requires decreasing only the active divalent cations …

Investigating The Performance Of High Viscosity Friction Reducers Used For Proppant Transport During Hydraulic Fracturing, Mohammed Salem Ba Geri

Doctoral Dissertations

"Over the last few recent years, high viscosity friction reducers (HVFRs) have been successfully used in the oil and gas industry across all premier shale plays in North America including Permian, Bakken, and Eagle Ford. However, selecting the most suitable fracture fluid system plays an essential role in proppant transport and minimizing or eliminating formation damage.

This study investigates the influence of the use of produced water on the rheological behavior of HVFRs compared to a traditional linear guar gel. Experimental rheological characterization was studied to investigate the viscoelastic property of HVFRs on proppant transport. In addition, the successful implication …

Insights Into Well Performance And Completion Optimization Using A Coupled Fracfocus And Drillinginfo Database, Mustafa A. Al-Alwani

Doctoral Dissertations

“The hydraulic fracturing designs, drilling, and completion trends are undergoing continuous change as the oil and gas industry pushing the boundaries of the traditional designs to increase wells productivity and meet the energy demand. The lateral length in addition to the amount of proppant and water used in well stimulation have witnessed a paradigm shift over the past few years. The motivation for this work began with a desire to better understand well performance as a function of the type of fracturing fluid treatment applied. An early objective was to compare whether East Texas Cotton Valley wells stimulated with water …

Intelligent Data-Driven Decision-Making To Mitigate Or Stop Lost Circulation, Husam Hasan Alkinani

Doctoral Dissertations

”Lost circulation is a challenging problem in the oil and gas industry. Each year, millions of dollars are spent to mitigate or stop this problem. The aim of this work is to utilize machine learning and other intelligent solutions to help to make better decision to mitigate or stop lost circulation. A detailed literature review on the applications of decision tree analysis, expected monetary value, and artificial neural networks in the oil and gas industry was provided. Data for more than 3000 wells were gathered from many sources around the world. Detailed economics and probability analyses for lost circulation treatments’ …

Thermomechanical Analysis Of Rock Asperity In Fractures Of Enhanced Geothermal Systems, Chao Zeng

Doctoral Dissertations

"Enhanced Geothermal Systems (EGS) offer great potential for dramatically expanding the use of geothermal energy and become a promising supplement for fossil energy. The EGS is to extract heat by creating a subsurface system to which cold water can be added through injection wells. Injected water is heated by contact with rock and returns to the surface through production well. Fracture provides the primary conduit for fluid flow and heat transfer in natural rock. Fracture is propped by fracture roughness with varying heights which is called asperity. The stability of asperity determines fracture aperture and hence imposes substantial effect on …

A Proactive Drilling System To Prevent Stuck Pipe And Differential Sticking, Ethar H. K. Alkamil

Doctoral Dissertations

"During drilling operations for the E oilfield in the Mishrif formation in southern Iraq, stuck pipe and differential sticking have been identified as significant geomechanical and drilling problems for several deviated wells. In this work, an integrated approach with three phases is presented to serve as a proactive geo-drilling system to prevent wellbore instability. In the first phase, a comprehensive geomechanical assessment of the Mishrif formation has been carried out to evaluate the in-situ stresses, maximum horizontal stress orientation, pore pressure, rock properties, and rock strength parameters. Moreover, the geomechanical evaluation has been incorporated into the mud design using three …

Comprehensive Evaluation Of A Novel Eor Method-Coupling Low Salinity Water Flooding And Preformed Particle Gel To Enhance Oil Recovery In Fractured Reservoirs, Ali K. Alhuraishawy

Doctoral Dissertations

"Excess water production in oil fields is becoming a challenging economic and environmental problem as more reservoirs are maturing. Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks. The recovery of oil from carbonate reservoirs is usually low due to their extreme heterogeneity caused by natural fractures and the nature of oil-wet matrix. Also, oil recovery from fractured sandstone reservoirs is often low due to areal heterogeneity. Gel treatments have proven to be a successful and inexpensive fluid diversion method when used to plug the thief zones …

Geomechanical Characterizations And Correlations To Reduce Uncertainties Of Carbonate Reservoir Analysis, Farqad Hadi

Doctoral Dissertations

"Although carbonate reservoirs hold a wealth of hydrocarbon, they are among the most difficult types of reservoirs to be characterized. Carbonate reservoirs by nature have complex depositional environments and diagenetic processes in which brittle, ductile, fractured rocks, and vugular pores may all exist within small interval. This huge variance in the rock mechanical properties can cause challenges in the reservoir's development, especially in applications related to geomechanics.

The main objective of this research is to geomechanically characterize and correlate the carbonate mechanical properties with their petrophysical properties. A comprehensive review for the geomechanical-petrophysical properties of carbonates was conducted from previous …

Integrated Study On The Applicability Of Co₂-Eor In Unconventional Liquids Rich Reservoirs, Dheiaa Khafief Khashan Alfarge

Doctoral Dissertations

"Unconventional Liquids Rich Reservoirs (ULR) such as Bakken, Niobrara, and Eagle Ford have become the main target for oil and gas investors as conventional formations started to deplete and diminish in number. These unconventional plays have a huge oil reserve; however, the predicted primary oil recovery is still low as an average of 7.5 %. Unconventional Improved Oil Recovery (UIOR) techniques are still a new concept in the oil industry because there is no commercial project for any IOR technique so far. Injecting carbon dioxide (CO₂) might be the most potential strategy to improve oil recovery in such complex plays. …

Limiting Key Drilling Parameters To Control Mud Losses In Basra's Oil Fields, Iraq, Abo Taleb Tuama Al-Hameedi

Doctoral Dissertations

"Wells in Basra's oil fields are highly susceptible to lost circulation problems when drilling through the Dammam, Hartha, and Shuaiba formations. Drilling engineers are challenged to select the optimum value for key drilling parameters such as ECD, Yp, MW, WOB, ROP, and RPM to mitigate mud losses in these formations. Many of these drilling parameters are inter-related and the overall impact of changing key parameters require extensive drilling experience and study. A multi-regression analysis was performed on mud loss event data for more than 300 wells drilled in Basra's oil fields. From this analysis, a model was developed to predict …

Synthesis And Comprehensive Studies Of Nanogels For Enhanced Oil Recovery, Jiaming Geng

Doctoral Dissertations

“Nanomaterials have been developed and applied for enhanced oil recovery (EOR) in oil industry. Among the developed nanomaterials, nano-sized crosslinked polymeric gel particles (nanogels) have shown the potential in improving both the macro- and micro-displacing efficiency. This dissertation focuses on the synthesis and the potential EOR mechanisms of nanogels. Nanogels with positive, negative, and neutral charges were synthesized through suspension polymerization. The morphology, size distribution, and zeta potential of nanogels were elucidated by corresponding technologies, such as scanning electron microscopy and dynamic light scattering. The ability of nanogels in oil-water interfacial tension (IFT) reduction and oil-in-water (o/w) emulsion stabilization was …

Screening Guidelines And Data Analysis For The Application Of In-Situ Polymer Gels For Injection Well Conformance Improvement, Munqith Naeem Rashak Aldhaheri

Doctoral Dissertations

"Excessive water production represents a major industry challenge because of its serious economic and environmental impacts. Polymer gels have been effectively applied to mitigate water production and extend the productive lives of mature oilfields. However, selecting a proper gel technology for a given reservoir is a challenging task for reservoir engineers because of the associated geological and technical complexities and the absence of efficient screening tools.

A comprehensive review for the worldwide gel field projects was conducted to develop an integrated systematic methodology that determines the applicability of three injection well gel technologies including bulk gels, colloidal dispersion gels, and …

Mass Transfer Studies In Heavy Oil Recovery Using Solvents, Vijitha Mohan

Doctoral Dissertations

"Heavy oil, sometimes called bitumen, is known for its high viscosity (above 100 cp) and low API gravity (below 22⁰). In most cases, viscosity reduction is needed for the final product. There is a considerable amount of heavy oil in Alberta, Canada and the world's largest heavy oil deposit is in Venezuela. Yet less than 1% of it can be recovered because of its high viscosity. For shallow reservoirs, it is possible to resort to open cast mining. For deeper reservoirs, steam is used at ~ 350 ⁰C which gets the oil viscosity reduced to 1cp, which can now be …

Numerical Simulation Of Viscoelastic Buckle Folds: Implications For Stress, Fractures, Porosity And Fluid Flow, Xiaolong Liu

Doctoral Dissertations

"Over the past several decades, buckle folds have been exclusively studied by numerous methods. However, lots of assumptions and simplifications are made, which may not result in realistic in-situ stress conditions leading to rock failure. This study represents the first numerical simulation of folding under the consideration of gravity and pore pressure to simulate the structural development of buckle folds.

The first topic covered in this dissertation is the fracture associated to the single layer fold. It is concluded that burial depth, viscosity, and permeability are critical for the initiation of major fracture sets at the hinge zone with varying …

Investigation Of Hydraulic Fracture Complexity And The Benefits Of Maximizing Or Minimizing Complexity In Unconventional Resources, Rashid Sheikh Kassim

Doctoral Dissertations

"This dissertation discusses two separate, yet inter-related studies. The first study was an extension of historical work comparing transversely fractured versus longitudinally fractured horizontal wells in multiphase flow environment. The second study investigated hydraulic fracture complexities and the benefits of maximizing or minimizing complexities in unconventional resources and tight reservoirs.

The main objective of this research was to investigate fracture complexity and its impact on well performance and economics. To achieve that objective, three different integrated completions and reservoir models were built. Two of the three models, a hybrid reservoir model and micro-seismic based SRV (stimulated reservoir volume) model, were …

Rock And Fluid Flow Characterization On Unconventional Reservoir Using Confocal-Laser-Microscopy And Micromodels, Songyuan Liu

Doctoral Dissertations

"Unconventional oil reservoirs have become significant sources of petroleum production and have even better potential in the future. Many unconventional oil systems consist of nanoscale pore throats, sub-micro-scale pores and micro-scale fractures that are significantly smaller than those from conventional reservoirs. To understand fluid flow behavior in unconventional reservoir, lab approaches were conducted using lab-on-chip method for the direct visualization of the water/oil flow in sub-micro-scale channels and the flow behavior with influence of surfactant and fractures.

In this work, tight sandstone thin slice was characterized using confocal-laser-microscope. Using designed micromodels, microscopic study of interface and residual oil distribution as …

Data Analysis And Application Guidelines Of Particle Gel Treatments, Yue Qiu

Doctoral Dissertations

“Water production is a severe worldwide issue in mature oilfields, which results in shortening the economic life of oil and gas wells. Particle gel have been widely applied in mature oilfields to improve reservoir sweep efficiency and control water production. To date, more than 10,000 injection wells were successfully treated by particle gels. However, considerable uncertainty still exists regarding to where and how particle gel treatments can be best applied.

The main objective of this study is to provide application guidelines and prediction model for particle gel treatments through data analysis. In this study, four particle gel treatment datasets have …

The Effect Of Testing Conditions On Lost Circulation Materials' Performance In Simulated Fractures, Montri Jeennakorn

Doctoral Dissertations

"Lost circulation (LOC) problems increase costs of drilling significantly. It is not only the cost of the drilling fluid that is lost into the formation but also the costs of subsequent problems that can be higher than the cost of the drilling fluids. LOC also possibly leads to a serious risk of blowout incident.

Lost circulation materials (LCM) are regularly added to the drilling fluids with an expectation of plugging the flow path. Due to the difficulties of testing and monitoring LCM sealing processes in the field, LCM evaluation in the laboratory is often used to prove and assure successful …

Wetting Kinetics In Forced Spreading, Amer Mohammad Al-Shareef

Doctoral Dissertations

"Under dynamic conditions, the dynamic contact angle (the angle that the liquid makes with the solid) of a liquid on a solid surface varies dramatically with substrate velocity from its equilibrium value. Experimental data of the dynamic contact angles for polydimethylsiloxane (PDMS or silicone oil) under air on a glass substrate coated with teflon, for water under PDMS, for solutions of the polymer polyethylene oxide (PEO) under air, for solutions of PEO under PDMS, were obtained to simulate and understand the systems of brine or brine containing a polymer displacing viscous crude. A variety of solid substrates were used other …

Modeling Gas Inflow For Extremely Low Permeability Shale Using Cfd, Chatetha Chumkratoke

Doctoral Dissertations

"Computational fluid dynamics (CFD) has been used to model 2-D well inflow over a range of permeabilities to study the impact of various well completion strategies (Augustine, 2011). Augustine's 2-D model was subsequently extended for 3-D flow by Thepporprapakorn (2013), for gas flow in the permeability range of tight gas (0.01 mD).

This work presents a 3-D CFD model of gas inflow valid for extremely low ranges of permeability (0.00001 mD). In extremely low permeability, gas flow is complex and includes flow from fractures, flow through porous media, and diffusive gas transport. Diffusive gas transport is important when strong density …

Modeling Explosive Lensing On A Cylindrical Body In Air: A First Step Towards Sealing An Underwater Offshore Oil Spill, Phillip R. Mulligan

Doctoral Dissertations

"In 2010, the British Petroleum (BP) Deepwater Horizon accident leaked oil into the Gulf of Mexico for 87 days. A fast response method that can seal an oil pipe and stop the release of oil is needed in order to prevent future oil leaks from turning into ecological and financial disasters. Explosives can serve this need.

This research examined how a circular implosive discontinuous explosive lens interacts with a cylindrical surface. The following research was designed to study the applicability of the Method this author developed to predict the peak pressure from multiple shockwaves converging on a centrally located cylinder. …

Development And Evaluation Of A Coaxial Cable Sensing System For Co₂ Sequestration Wellbore Integrity Monitoring, Yurong Li

Doctoral Dissertations

"Downhole monitoring plays a crucial part in geological carbon dioxide (₂) sequestration. Various downhole monitoring technologies have been explored and applied, but they are either expensive or have system longevity issues. To address this issue, a robust and cost-effective downhole sensing system based on distributed coaxial cable sensors is developed and evaluated in laboratory, and a numerical simulation with staged finite element model is conducted to study the feasibility of using the coaxial cable sensing system for monitoring and evaluation of wellbore stability during CO₂ injection.

The real-time distributed sensing system is composed of Fabry-Perot interferometer based …

Analysis And Mitigation Of Wellbore Breakout And Fracturing, Reza Rahimi

Doctoral Dissertations

"Mechanical wellbore integrity problems while drilling are mainly due to wellbore shear failure or tensile failure. To ensure wellbore integrity, breakout and fracture geomechanical analysis is conducted to estimate minimum and maximum drilling fluid densities. Currently, there is no agreement as to which rock failure criterion to use for estimating breakout or fracture criteria to use for analyzing drilling induced fractures. However, when wellbore integrity issues arise while drilling, mitigation strategies can be applied to rectify these problems.

This dissertation analyzes criteria for wellbore breakout and fracturing. Also, mitigation strategies for breakout and fracturing while drilling were experimentally investigated. Thirteen …

Particle Gel Propagation And Blocking Behavior Through High Permeability Streaks And Fractures, Abdulmohsin Imqam

Doctoral Dissertations

Water channeling, one of the primary reservoir conformance problems, is caused by reservoir heterogeneities that lead to the development of high-permeability streaks and fractures. These streaks and fractures prevent large amounts of oil from being recovered. The ultimate objective of this research was to provide comprehensive insight into designing better particle gel treatments intended for use in large openings, including open fractures, high permeability streaks, and conduits to increase oil recovery and reduce water production.

An intensive laboratory study was conducted to better understand the injection and placement mechanisms of millimeter and micron size preformed particle gels (PPGs) through thief …

Investigating New Accident Causation, Risk Assessment, And Mitigation Strategy Selection Tools In The Petroleum Industry, Mohammad A. Alkazimi

Doctoral Dissertations

"The inherent complexity of the processes and the volatile nature of petroleum products compel the petroleum industry to continually seek and develop tools and techniques to identify, evaluate, and mitigate potential risks that can negatively impact their process operations. Additionally, government agencies and nonprofit professional societies guide the petroleum industry with regulatory guidelines, standards, and recommended best practices. The industry and these agencies and societies work to improve operational management, to ensure safe working conditions, and to minimize risk of all kinds, so that if failures occur, damage is contained within tolerable limits (Health and Safety Executives, 2013).

The currently …

Numerical And Field Data Analysis Of Drill Stem Vibration, Mohammed Fayez Al Dushaishi

Doctoral Dissertations

"Drill stem vibration is a major cause of premature failure of drill stem components and drilling inefficiency. In severe cases, drill stem vibration may lead to wellbore instability that could lead to increased operational cost. Drill stem vibrations are affected by design decisions and the drilling environment. Examples are; bottom hole assembly configurations, selection of operational parameters, and frequent changes in lithology. Vibration modeling, analysis of vibration data, and specialized vibration reduction tools are methods in use to prevent and mitigate severe vibrations.

A drill stem vibration model was created using nonlinear strain formulation which couples the axial, lateral and …

Investigation Of Lost Circulation Materials Impact On Fracture Gradient, Mortadha Turki Alsaba

Doctoral Dissertations

"Lost circulation is a challenging problem to be prevented or mitigated during drilling. Lost circulation treatments are widely applied to mitigate losses using a corrective approach or to prevent losses using preventive approaches, also known as "wellbore strengthening". The disagreement among the different wellbore strengthening theories and the lack of understanding the strengthening mechanism resulted in the absence of a standardized method to evaluate the effectiveness of lost circulation materials (LCM) for wellbore strengthening application.

An extensive experimental investigation was performed by constructing a high pressure LCM test apparatus to investigate the effects of different parameters on the sealing efficiency …

Analysis Of Production And Pressure Data To Characterize The Performance Of Oil And Gas Reservoirs, Abuagila Ramadan Elgmati

Doctoral Dissertations

"Production data analysis is an important tool for estimating important reservoir parameters. In particular, determining the average reservoir pressure (p_av) and tracking its change with time is critical to analyzing and optimizing reservoir performance. The traditional method for determining p_av involves pressure buildup tests. A direct method for estimating (p_av) from flowing pressures and rate data is available. However, the method is for an idealized case that assumes constant production rate during pseudo steady-state (PSS) flow, which is not generally true for real wells. This research extends that approach so that it can …