Open Access. Powered by Scholars. Published by Universities.®

Petroleum Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Biochemical and Biomolecular Engineering

Institution
Keyword
Publication Year
Publication
Publication Type

Articles 31 - 60 of 82

Full-Text Articles in Petroleum Engineering

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman Jan 2024

Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …


Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao Jan 2024

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. The optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. The primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …


Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song Jan 2024

Lessons Learned From Laboratory Study And Field Application Of Re-Crosslinkable Preformed Particle Gels Rppg For Conformance Control In Mature Oilfields With Conduits/Fractures/Fracture-Like Channels, Baojun Bai, Thomas P. Schuman, David Smith, Tao Song

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This Paper Surveys the Role of Re-Crosslink able Preformed Particle Gels (RPPG) in Addressing Conformance Challenges within Mature Oilfields. Despite Widespread Preformed Particle Gel (PPG) Application in 15,000+ Wells, their Limitations in Sealing Fractures and Conduits Prevalent in Mature Reservoirs Have Driven the Development of RPPG Formulations. Synthesized in Various Sizes from Micrometer to Millimeter Levels, These Environmentally Friendly RPPGs Are Tailored for Diverse Reservoir Conditions. Findings Showcase the Successful Laboratory-Scale Creation and Upscaling of RPPG Products, Offering Adaptability to Temperatures from 20 to 175°C, Customizable Sizes, Swelling Ratios (5 to 40 Times), and Re-Crosslinking Times Spanning Minutes to Days. …


Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai Jan 2024

Would Self-Supported Fracture Contribute To The Hydrocarbon Production In Shale Reservoir Besides Proppant-Supported Fracture, Y. Sun, G. Li, S. Zeng, J. Wu, J. Liu, M. Xu, C. Dai, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

During hydraulic fracturing in deep shale gas reservoirs, it is difficult to pump proppants long distances, and self-supported fractures are formed at the far and upper ends of the fractures. The self-supported fracture could hold the fracture space by its surface structure again fracture closure. However, it faces various aspects of impairment during shale gas reservoir development, which affect its conductivity. Among the impairment, long-term production results in a decline of bottom hole pressure, which will compact the fracture space, and self-supported fractures without proppant are more sensitive than those with proppant. In this paper, we conducted a series of …


Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao Jan 2024

Descriptive Statistical Analysis Of Experimental Data For Wettability Alteration With Smart Water Flooding In Carbonate Reservoirs, Muhammad Ali Buriro, Mingzhen Wei, Baojun Bai, Ya Yao

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Smart water flooding is a promising eco-friendly method for enhancing oil recovery in carbonate reservoirs. the optimal salinity and ionic composition of the injected water play a critical role in the success of this method. This study advances the field by employing machine learning and data analytics to streamline the determination of these critical parameters, which are traditionally reliant on time-intensive laboratory work. the primary objectives are to utilize data analytics to examine how smart water flooding influences wettability modification, identify key parameter ranges that notably alter the contact angle, and formulate guidelines and screening criteria for successful lab design. …


Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai Jan 2024

Evaluation Of Novel Preformed Particle Gel System For Conformance Control In Mature Oil Reservoirs, Abdulaziz Almakimi, Ahmed Ben Ali, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

To address challenges associated with excessive water production in mature oil reservoirs, this study introduces a carboxymethyl cellulose (CMC)-based material as a novel preformed particle gel (PPG) designed to plug excessive water pathways and redistribute the subsequent injected water toward unswept zones. Through microwave-assisted grafting copolymerization of CMC with acrylamide (AM), we successfully generated multi-sized dry particles within the range of 250–800 µm. Comprehensive analyses, including Fourier-transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), have confirmed the chemical composition and morphology of the resulting carboxymethyl cellulose-grafted crosslinked polyacrylamide (CMC/PAMBA). Swelling kinetics and rheology tests were conducted to confirm the …


Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai Nov 2023

Development Of Eco-Friendly Chitosan-G-Polyacrylamide Preformed Particle Gel For Conformance Control In High-Temperature And High-Salinity Reservoirs, Reem Elaf, Ahmed Ben Ali, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Oil and gas extraction has become challenging nowadays due to the accompanying amount of excess produced water that results in poor recoverability of hydrocarbon, besides other environmental and economic isues. A recent and efficient technology for conformance control is the injection of preformed particle gels (PPGs), which results in a more practical production process. Nevertheless, existing treatments fail in high-temperature reservoirs, are extremely sensitive to salinity, and are hazardous. The characteristics of the designed PPG, such as mechanical strength and thermal durability, is mainly depend on their crosslinking method. Polysaccharides-based gels prepared by physical crosslinking are weaker than the ones …


Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman May 2023

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …


A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai Feb 2023

A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling excessive water production in mature oil fields has always been a desired objective of the oil and gas industry. This objective calls for planning of more effective water-control gel treatments with optimized designs to obtain more attractive outcomes. Unfortunately, planning such effective treatments remains a dilemma for reservoir engineers due to the lack of methodical design tools in the industry. This paper presents a novel systematic design approach for polyacrylamide-based bulk gel treatments by classifying their field projects according to the gel volume-concentration ratio (VCR) into three design types. In terms of one another, the approach estimates either the …


A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai Feb 2023

A Systematic Design Approach For Bulk Gel Treatments Based On Gel Volume-Concentration Ratio In Field Projects, Munqith Aldhaheri, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Controlling excessive water production in mature oil fields has always been a desired objective of the oil and gas industry. This objective calls for planning of more effective water-control gel treatments with optimized designs to obtain more attractive outcomes. Unfortunately, planning such effective treatments remains a dilemma for reservoir engineers due to the lack of methodical design tools in the industry. This paper presents a novel systematic design approach for polyacrylamide-Based bulk gel treatments by classifying their field projects according to the gel volume-concentration ratio (VCR) into three design types. in terms of one another, the approach estimates either the …


The Success Story Of First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Reid Edwards, Samson Ning, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang Jan 2023

The Success Story Of First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Reid Edwards, Samson Ning, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The primary goal of the first ever polymer flood field pilot at Milne Point is to validate the use of polymers for heavy oil Enhanced Oil Recovery (EOR) on Alaska North Slope (ANS). The specific objectives are systematic evaluation of advanced technology that integrates polymer flooding, low salinity water flooding, horizontal wells, and numerical simulation based on polymer flood performance data. Accordingly, under the co-sponsorship of the US Department of Energy and Hilcorp Alaska LLC the first ever polymer field pilot commenced on August 28, 2018 in the Schrader Bluff heavy oil reservoir at the Milne Point Unit (MPU) on …


Experimental Study: Investigating The Anions And Cations' Effects On The Elasticity Of The Anionic And Cationic High Viscosity Friction Reducers, Xiaojing Ge, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai, Yuwei Zhang Jan 2023

Experimental Study: Investigating The Anions And Cations' Effects On The Elasticity Of The Anionic And Cationic High Viscosity Friction Reducers, Xiaojing Ge, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai, Yuwei Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) are widely used as friction-reducing agents and proppant carriers during hydraulic fracturing. The reuse of produced water has gained popularity due to environmental and economic benefits. Currently, the field's most commonly used friction reducers are anionic and cationic HVFRs. Anionic HVFRs are typically pumped with freshwater, while cationic HVFRs are used with high Total Dissolved Solids (TDS) produced water. Cationic friction reducers are believed to have better TDS tolerance, friction reduction performance, and proppant transport capabilities compared to anionic friction reducers under high TDS conditions due to their superior viscoelastic properties. In addition, the impact …


Comparative Study Of Proppant Transport In The Vertical Fracture For High Viscosity Friction Reducers And Slickwater Fracturing With High-Tds Marcellus Shale Formation Water, Xiaojing Ge, Abdulmohsin Imqam, Baojun Bai Jan 2023

Comparative Study Of Proppant Transport In The Vertical Fracture For High Viscosity Friction Reducers And Slickwater Fracturing With High-Tds Marcellus Shale Formation Water, Xiaojing Ge, Abdulmohsin Imqam, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) have been gaining more attention and increasing in use as proppant carriers. Reusing of produced water has also been driven by both environmental and economic benefits. However, high total dissolved solids (TDS) of produced water and high reservoir temperature significantly decrease the viscoelastic properties of HVFRs even for the cationic ones, which further reduce their proppant transport capabilities. Increasing loadings of HVFRs also has very limited effects on improving their proppant transport performances under high-TDS and high-Temperature conditions. The ultimate objective of this experimental study is to investigate the injection rate effects on the proppant …


Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai Jan 2023

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …


Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai Jan 2023

Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) have been recently gaining more attention and increasing in use, not only as friction-reducing agents but also as proppant carriers. The settling velocity of the proppant is one of the key outputs to describe their proppant transport capability. However, it is influenced by many factors such as fluid properties, proppant properties, and fracture properties. Many empirical/physics-based models and correlations to predict particle settling velocity have been developed. However, they are usually based on certain assumptions and have applicable limits. In contrast, machine learning models can be considered as a black box. The objective of this …


Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman Jan 2023

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …


Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai Jan 2023

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …


Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control, Jingyang Pu, Baojun Bai, Thomas P. Schuman Jan 2023

Re-Assembling Polymer Particle Package For Conformance Control And Fluid Loss Control, Jingyang Pu, Baojun Bai, Thomas P. Schuman

Patents

This invention is broadly concerned with compositions and processes for oilfield applications. More specifically, this invention relates to novel polymer constructed packages that, when pumped into a petroleum well, provide tunable characteristics of transformation and delayed self-assembly with each other under reservoir conditions to yield strong, elastic, bulk gel materials. The compositions comprise a polymer, assembling agents, and optional additives used for the re-assembly stage are uniformly-distributed within the initial gel particles. The polymer particle packages absorb water and swell upon exposure to water, thus exposing the "assembling agents" that enable re-assembly. Both swelling and re-assembly are proportionally controlled via …


Re-Crosslinking Particle Gel For Co2 Compliance Control And Co2 Filtration Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman Jan 2022

Re-Crosslinking Particle Gel For Co2 Compliance Control And Co2 Filtration Blocking, Yifu Long, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the composition of particle gels for CO2 - EOR and CO2 storage . More particularly , CO2 resistant particle gels are provided that can re - crosslink at subterranean conditions . These particle gels can be deployed to improve the conformance of CO , flooding , CO , huff - puff , or Water - Alternative - Gas ( WAG ) . The applications may also involve CO2 storage , such as the blocking of CO2 leakage and similar CO2 processing .


Fiber Assisted Re-Cross-Linkable Polymer Gel And Preformed Particle Gels For Fluid Loss And Conformance Control, Baojun Bai, Ze Wang, Zhe Sun, Jingyang Pu, Thomas P. Schuman Jan 2022

Fiber Assisted Re-Cross-Linkable Polymer Gel And Preformed Particle Gels For Fluid Loss And Conformance Control, Baojun Bai, Ze Wang, Zhe Sun, Jingyang Pu, Thomas P. Schuman

Patents

Described herein are compositions useful for controlling fluid flow, for example in a target zone of a subterranean environment, and methods of forming and using the same. The composition generally comprises a quantity of fibers and a quantity of swellable particles, which may be dispersed in a carrier fluid. The composition may be synthesized in the form of a bulk gel or may be gelatinated during use. The fibers in the compositions provide improved performance as compared to prior PPG and RPPG particle containing compositions. Specifically, the compositions reinforce the re-cross-linked/re-associated hydrogel plug in underground features and support proper rehydration …


Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu Oct 2021

Understanding The Plugging Performance Of Hpam-Cr (Iii) Polymer Gel For Co2 Conformance Control, Xindi Sun, Baojun Bai, Ali Khayoon Alhuraishawy, Daoyi Zhu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

With the demand for conformance control in carbon dioxide (CO2) flooding fields, hydrolyzed polyacrylamide-chromium [HPAM-Cr (III)] polymer gel has been applied in fields for CO2 conformance control. However, the field application results are mixed with success and failure. This paper is intended to understand the HPAM-Cr (III) polymer gel plugging performance in CO2 flooding reservoirs through laboratory experiments and numerical analysis. We conducted core flooding tests to understand how the cycles of CO2 and water affect the HPAM-Cr (III) polymer gel plugging efficiency to CO2 and water during a water-alternating-gas (WAG) process. Berea Sandstone …


Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol May 2021

Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol

Graduate Theses and Dissertations

Wastewater has a serious impact on environment and public health due to its high concentration of nutrients and toxic contaminants. Without proper treatment, excess nutrients discharged in wastewater can cause a damage to the ecosystem such as undesirable pH shifts, cyanotoxin production, and low dissolved oxygen concentrations.

Main objectives of this dissertation work were to investigate i) the biofuel potential of P. cruentum when grown in swine wastewater, ii) the influence of four most commonly used ion exchange resins on the system efficiency and selectivity for the removal of sodium, calcium, and magnesium ions, and iii) the modeling of wafer-enhanced …


Modelling And Analysis Of Performance For Biogas Fuelled Gas Engine Using Matlab, Indran Kunusilin Jan 2021

Modelling And Analysis Of Performance For Biogas Fuelled Gas Engine Using Matlab, Indran Kunusilin

Student Works (2020-2029)

A wide-ranging performance evaluation of a multi-cylinder gas engine operating wit biogas as a fuel were studied based on its performance parameters such as effective power, torque, SFC, MEP and Thermal Efficiency and its HRR analysis with the aid of modeling software, MATLAB. The analysis and performance study were used based on the thermodynamic model of an Otto cycle, which is based on the gas engines used. Parameters such as cylinder pressure with domain of crank angle and heat addition model (using Wiebe function ) were studied to model the and analyze the HRR .Besides that , the contributing factors …


Study On Engine Performance And Exhaust Pollutant Using Isobutanol - Calophyllum Inophyllum Biodiesel - Diesel Ternary Blends In A Diesel Engine, Mohd Azham Mohd Alwi Jan 2021

Study On Engine Performance And Exhaust Pollutant Using Isobutanol - Calophyllum Inophyllum Biodiesel - Diesel Ternary Blends In A Diesel Engine, Mohd Azham Mohd Alwi

Student Works (2020-2029)

Renewable energy sources such as biodiesel and bio-alcohol are desirable and are alternative to meet energy demand and control emission, from renewable sources such as ethanol, methanol, butanol, and pentanol. Biodiesel has a notable interest in offering many advantages with few disadvantages and needs to be extended for comprehensive use. Applying greater alcohols such as butanol with biodiesel in fuel blends is a beneficial technic to enhance the fuel characteristics and use biodiesel and alcohol efficiently. Isobutanol is an organic compound that has very low volatility, higher-chain alcohols have energy densities close to gasoline. It is not as volatile or …


Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning Jan 2021

Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three …


First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang Jan 2021

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska's 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska's challenging environment. …


Production Of Renewable Hydrocarbon Fuel Via Titanium Oxide-Alumina (Tio2-Al2o3) Catalytic Deoxygenation Reaction, Xian Yih Ooi Apr 2020

Production Of Renewable Hydrocarbon Fuel Via Titanium Oxide-Alumina (Tio2-Al2o3) Catalytic Deoxygenation Reaction, Xian Yih Ooi

Student Works (2020-2029)

The renewable hydrocarbon-like biofuel from biomass is crucial to substitute fossil fuel. Catalytic deoxygenation is a biofuel upgrading process to eliminate the high oxygen content in biofuel which will lead to corrosion, instability and lower heating value problems. The choice of support is significant to provide the maximum acid strength for the hydrogenolysis of C-O bonds. Al2O3 supported catalyst has drawn attention due to the high acidity. However, the high acidity leads to coke deposition, unstable and deactivation of the catalyst. Thus, it is important to develop methods to improve catalyst performance, reduce catalyst coking and enhance catalyst lifetime. Recently, …


Emulsion Stability Of Heavy Oil With Surfactants And Nanoparticles, Zainab Abdulmohsein, Baojun Bai, Parthasakha Neogi Jan 2020

Emulsion Stability Of Heavy Oil With Surfactants And Nanoparticles, Zainab Abdulmohsein, Baojun Bai, Parthasakha Neogi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The recovered crude oil is often in form of an emulsion and the recovery is cut off when water to oil ratio exceeds a certain amount. The emulsions vary from water-in-oil to oil-in-water and the step that follows is to coalesce droplets to get two continuous liquids. Difficulties arise when the oil contains emulsifiers. There are naturally occurring surfactants, or the oil recovered is by enhanced oil recovery techniques which have additives that stabilize the droplets. We have considered below a heavy oil (viscosity 650-750 mPa.s) containing one of the three surfactants: a nonionic surfactant or a cationic surfactant or …


Co2-Eor Mechanisms In Huff-N-Puff Operations In Shale Oil Reservoirs Based On History Matching Results, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai Aug 2018

Co2-Eor Mechanisms In Huff-N-Puff Operations In Shale Oil Reservoirs Based On History Matching Results, Dheiaa Alfarge, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Improved Oil Recovery (IOR) techniques in Unconventional Liquids Rich Reservoirs (ULR) are still a new concept because there is no commercial project for any IOR technique so far. Carbon dioxide (CO2) based EOR technique has been effectively applied to improve oil recovery in the tight formations of conventional reservoirs. Extending this approach to unconventional formations has been extensively investigated over the last decade because CO2 has unique properties which make it the first option of EOR methods to be tried. However, the applications and mechanisms for CO2-EOR in unconventional reservoirs would not necessarily be the same as …


Understanding Inhibition Of A Biodesulfurization Enzyme To Improve Sulfur Removal From Petroleum, Yue Yu Jan 2018

Understanding Inhibition Of A Biodesulfurization Enzyme To Improve Sulfur Removal From Petroleum, Yue Yu

Theses and Dissertations--Chemical and Materials Engineering

The biodesulfurization 4S-pathway is a promising complementary enzymatic approach to remove sulfur from recalcitrant thiophenic derivatives in petroleum products that remain from conventional hydrodesulfurization method without diminishing the calorific value of oil. The final step of this pathway involves the carbon-sulfur bond cleavage from HBPS, and the production of the final products 2-hydroxybiphenyl (HBP) and sulfite, has been recognized as the rate-limiting step, partially as a result of product inhibition. However, the mechanisms and factors responsible for product inhibition in the last step have not been fully understood. In this work, we proposed a computational investigation using molecular dynamic simulations …