Other Chemical Engineering Commons^™

A Foundational Approach To Extrusion And Compounding, David Frankart

Williams Honors College, Honors Research Projects

With a history of nearly 200 years, polymer processing and compounding is constantly changing to fit the material science needs of the era. Exposure of undergraduate students to the technology and practices used in industry today in a lab setting would create new opportunities for experiential learning and growth. The objective was to set up a 0.75”, 25 L/D Thermo Haake single screw extruder for lab use and run trials of material in a single screw extruder to set up a basis for experiments. Trials were run of co-polyester resin through a single screw extruder with carbon fiber additives varying …

Understanding Effects Of Engineering Outreach On Elementary Students, Thomas Cobb

Williams Honors College, Honors Research Projects

Currently, there is a desire to increase engineering understanding held by elementary students. As such, there needs to be a way to stimulate not only engineering, but other science, technology, engineering, and mathematics (STEM) topics in a young student’s lifestyle. One way to emphasize the importance of STEM while also showing how fun it can be is through different hands on activities led by individuals partaking in undergraduate studies or the industry. While having the students participate in the activities, it is important to understand what the students are learning and how the activity overall is viewed. With the help …

Improving The Delivered Specific Impulse Of Composite Rocket Propellant Through Alteration Of Chemical Composition: Methodology And Parameters For Characterization Of Propellant And Validation Of Simulation Software Common To The Amateur Rocketry Community, Isaac O'Brien, Austin Ryan

Williams Honors College, Honors Research Projects

In this study, two solid composite rocket propellants were designed utilizing ProPEP, a rocket propellant formulation software common in the amateur and hobby rocketry communities. The two propellants were designed to optimize specific impulse relative to a literature propellant designed by 1020 Research Labs. The literature propellant was also tested in order to validate the design of experiment as well as the mixing and testing procedures. All three propellants, which includes the literature propellant RCS-P, and the two novel propellants AKR-P1 and AKR-P2 were characterized with static tests. The results of the static tests provide data on propellant performance and …

Fluidized Bed Classroom Demonstration Unit, Theresa Chapa

Williams Honors College, Honors Research Projects

Fluid and Thermal Operations is a 4th year chemical engineering course at the University of Akron designed to introduce undergraduate students to the engineering and mathematical concepts behind the operation of a fluidized bed. The purpose of this honors project is to design and manufacture an inexpensive and portable unit that can be used in the classroom to visually demonstrate three functions of a fluidized bed to students. The fluidized bed is manufactured from items that can be purchased from a department or hardware store, is capable of being transported by a single person to and from a classroom and …

Cataloging The Degree Of Sensitization Via Electrochemical Reactivation For Studying The Corrosion Behavior Of Inconel 718, Austenitic, And Duplex Stainless Steels, Bradley Lynes

Williams Honors College, Honors Research Projects

Corrosion resistant materials can be expensive, but usually reduce the life cycle cost of metallic assets. However, negligent sensitization of these materials can lead to aggressive, intergranular corrosion. Using the methodology of the double loop electrochemical potentiokinetic reactivation (DL-EPR), this project investigates different steel reinforced bars and Inconel to determine the degree of sensitization after a heat treatment of 900°C for 2 hours. The purpose of this research is to validate and determine the appropriate test parameters for performing further DL-EPR test in the future. Additionally, the kinetics observed for each sample during the DL-EPR test will be analyzed and …

Effects Of Hofmeister Ions On Transition Temperature Of Two Thermo-Responsive Polymers, Joshua Moser

Williams Honors College, Honors Research Projects

It was hypothesized that through the use of Hofmeister Ions, the lower critical solution temperature (LCST) of poly(vinyl methyl ether) (PVME) and poly(ethylene glycol)- poly(N-isopropylacrylamide) (PEG-b-pNIPAAm) block-copolymer could be controlled. Through literature searches and small lab experiments, our team found that there may be a connection between Hofmeister effects and phase transition of a thermo-responsive polymer. To try and prove this, the lab team decided to take four cations (Mg²⁺,Na⁺, Cs⁺, K⁺) in solution with the thermo-responsive polymers and compared their LCST to solutions of the thermo-responsive polymer in de-ionized …

Form Stable Phase-Change Materials, Russell Dent, Marjan Kashfipour, Nitin Mehra, Jiahua Zhu

Williams Honors College, Honors Research Projects

This work investigates the use of two different polyols, xylitol (Xyl) and erythritol (Ery), in conjunction with boron nitride (BN) aerogels, for the purpose of creating thermally conductive composites. While the BN filler in Xyl composites achieved a high anisotropic thermal conductivity of up to 4.53 W/m-K at 18.2 weight percent filler loading, they do not exhibit good phase-change material qualities due to a low solidification enthalpy even at low cooling rates. Alternatively, the BN-Ery composites have shown promising results with a solidification enthalpy of 225.14 J/g and a melting enthalpy of 385.84 J/g at a heat rate of 5 …

Prevention Of Harmful Algal Blooms By The Mitigation Of Phosphorus Nutrient Loading Via Filtration By Steel Wool And Activated Carbon, Ronald Simpson, Sara Kidd, Samantha Zidd

Williams Honors College, Honors Research Projects

Harmful Algal Blooms (HABs) are a devastating ecological and economic consequence of the abundance of nutrient-rich agricultural runoff entering aquatic ecosystems (Baker et al. 2014). Bio-available phosphorus from synthetic fertilizers is one of the major nutrients contributing to this global issue. Previous studies indicated that dissolved phosphorus can be removed from an aqueous environment when passed through a composite mixture of granular steel wool particles and activated carbon (Erickson, Gulliver, and Weiss, 2007). In this project, we conducted experiments using higher quality concentration measurements to determine what grades of steel wool (SW-0000, SW-000, SW-00) and types of activated carbon (granulated …

Evaluation Of Silane-Doped Epoxy Coatings For Resisting Aluminum Corrosion By Oxalic Acid, An A. Niger Metabolite, Alex Pica

Williams Honors College, Honors Research Projects

The goal of this study was to investigate whether silane-doped epoxy coatings are capable of preventing corrosion of aluminum alloy 2024-T3 by oxalic acid, one of the primary metabolites of the fungus Aspergillus Niger. Previous research suggested the success of these types of coatings at preventing AA 2024-T3 corrosion in saline solutions, and this study was meant to build on those findings by investigating the efficacy of the coating in an acidic environment.

Each coating was applied to an AA 2024-T3 coupon by dissolving the epoxy and varying amounts of 3-aminopropyltriethoxysilane in acetone and then dripping the solution onto …

Environmentally Friendly Alternates To Chemlok 233 Adhesive Cement, Madeline M. Busch

Williams Honors College, Honors Research Projects

The purpose of this project was to determine and qualify suitable, environmentally friendly replacement(s) for the current Chemlok 233 adhesive cement used by UTC Aerospace. Chemlok 233 was discontinued by the manufacturer based on the availability of a hazardous solvent (Trichloroethylene – TCE). The Chemlok 233 Control and four Experimental alternates with similar properties were lab tested for adhesion strength in various UTC proprietary cement specifications. The specifications modeled Chemlok’s uses in the construction of pneumatic de-icers. Chemlok 2332 was selected for use in Cement A, and Chemlok 402 was chosen for use in Cement B based on their highest …

Interfacial Corrosion Of Copper And The Formation Of Copper Hydroxychloride, Mary Teague, Shengxi Li, Hongbo Cong

Williams Honors College, Honors Research Projects

Electrical circuitry is an industry, among many others, heavily using the element of copper. Ensuring the mechanical integrity of Cu is crucial, especially in salt environments, for the multifaceted composition of circuits. 4N NaCl solution (equilibrium concentration in ~84% RH) simulated this three-phase system. Rectangular Cu samples were partially immersed in both ambient and continuous lab air sparging atmospheres to understand waterline corrosion of the metal. Open circuit potentials (OCP) were continuously taken during the immersion testing for a maximum of 5 days. A scanning electron microscopy (SEM) equipped with an energy dispersive X-ray spectrometer (EDS), Raman spectroscopy, and 3-D …

Residence Time Distribution Of Mixing Based On Mathematical Modeling, Michelle Ayers

Williams Honors College, Honors Research Projects

Two different mathematical models were investigated for their use in describing the residence time distribution (RTD) of an industrial mixer. The first model investigated was the tanks-in-series model, while the second model was a combination of two branches of tanks-in-series. The tanks-in-series model is capable of characterizing the mixing present in the flow, but cannot detect non-idealities in flow such as bypassing and dead space. The multi-branch model has mathematical complexity, but it uses the second branch of flow to detect the presence of this non-ideal flow, determine if it is dead space of bypassing, and characterize how well-mixed the …

Investigation Of Scanning Kelvin Probe Techniques, Nicholas D'Angelo Jr., Hongbo Cong

Williams Honors College, Honors Research Projects

The original scope of this work was to advance the understanding of corrosion properties of additively manufactured (AM) materials by correlating microstructural defects in AM materials to the material conventional counterparts utilizing a scanning kelvin probe [Ametek VeraSCAN Electrochemical System]. However, upon the initiation of project research, it was observed that the system was not operational due to unknown hardware and software problems. The evolved scope of this work was to reconcile the operational issues and develop a repair and mitigation plan. After extensive troubleshooting, it was determined that the software was not properly configured, and the electrometer had permanently …

Vanadium Redox Flow Batteries: Design And Experimentation, Matthew George

Williams Honors College, Honors Research Projects

Vanadium flow batteries (VFB) are a type of battery that has potential as a grid-scale energy storage solution. An original design for a lab-scale VFB is presented herein, along with a procedure for electrolyte preparation from V₂O₅ using oxalic acid. The flow cell is constructed from Delrin, Teflon, Kynar, Santoprene, Nafion, graphite plate, and porous carbon. Two diaphragm pumps along with polyethylene, PVC, and Santoprene tubing are used. The active area is 58 cm². The battery was charged using a DC power supply at a constant current of 4 A with corresponding initial voltage of …

Modeling The Effect Thickener Structure Has On The Oil Release Of Grease, Dana Cressman

Williams Honors College, Honors Research Projects

Our hypothesis was that the thickener type and micelle concentration of grease affected its viscoelastic properties. Measurements were made using a TA AR G2 rheometer and calculations were made using TA rheometer analysis software to characterize the viscoelastic response of grease under oscillatory shear and frequency tests. The oscillatory frequency tests determined the critical micelle concentration. The oscillatory stress tests were taken at temperatures from 5 to 65 degrees Celsius to create a master curve based on time temperature superposition of the measurements. The crossover points of G’ and G” on the oscillatory stress tests demonstrated where the grease transitions …

Controlled Humidity Chambers To Maintain Red Roses’ Freshness And Improve Their Shelf Life, Rima Vasudevan

Williams Honors College, Honors Research Projects

Floriculture is the third largest agricultural crop in the United States of America. Flowers are usually transported in pots of mud or with the roots still submerged in water to increase their shelf life and ensure freshness during long hours of transport. This not only increases the weight of the transport materials but also makes the process expensive.

The research conducted provides the first stages of an alternative packaging material that can lower the weight of transport materials and maintain the freshness of the flowers. The experiments conducted in this work support the hypothesis that using controlled high (>60%) …

Role Of Salt On Coating Failure, Kyle Krause

Williams Honors College, Honors Research Projects

It is important to understand the role of salt in the coating failure because it may influence the coating degradation mechanism that is related to coating performance. This project will study the role of salt on two types of organic coatings under two different immersion environment. The environment selected was 3.5% by weight sodium chloride solution and deionized (DI) water. The two coatings were Neorez 1080 (a waterborne polyurethane) and Joncryl 587-AC (a solvent borne polyurethane). Each coating was tested in each environment using electrochemical impedance spectroscopy (EIS) measurement which presented a total of four data sets. The equivalent circuit …

Corrosion Resistance Of Silane Coatings On Aluminum And Magnesium Alloys, John Demopoulos

Williams Honors College, Honors Research Projects

The purpose of this project was to increase the corrosion resistance of aluminum and magnesium alloys by coating the coupons with a silane on the surface. Four different silanes: 3-aminopropyltriethoxysilane (APTES), Bis(triethoxysilylpropyl)amine (Bis), (Heptadecafluoro-1,1,2,2-tetrahydrodecyl)trichlorosilane (FTS), and (Heptadecafluoro-1,1,2,2-tetrahydrodecyl)triethoxysilane (non Cl FTS) will be used and compared to see which silane would give the best corrosion resistance. Each silane solution was coated on the coupons by using a solution method in which the coupon was submerged for 24 hours and then thermally cured for another 24 hours. Once the coating was applied, the water contact angle and the thickness of the coating …

Chemical Modification Of Crumb Rubber To Increase Its Bonding With Concrete, Mary T. Mccannon, Kendall J. Sweitzer

Williams Honors College, Honors Research Projects

The hydrophilicity of crumb rubber was increased with wet chemical modification and added to concrete to increase its adhesion with concrete, consequently the compressive strength relative to that of concrete with untreated rubber. Other modification methods were tested on crumb rubber and rubber sheets to yield an increase in hydrophilicity. Certain tests were less reliable for powder testing or tedious and time consuming and concrete materials and rubber may not be homogeneous.

For wet chemical modification, several approaches were attempted. First, crumb rubber was soaked in 5% sodium hydroxide, 5% potassium permanganate and saturated sodium bisulfite, tested for hydrophilicity using …

Titanium Nanoparticles Synthesized Via Hydrothermal Reaction, Kyle W. Hodge

Williams Honors College, Honors Research Projects

The main goal of this project was to determine if increasing the time and temperature of a hydrothermally reacted titanium nanotube would increase the size of the nanotubes. Five experiments were conducted while varying the time and temperature of the reaction: 120°C for 24 hours, 120°C for 48 hours, 150°C for 24 hours, 180°C for 24 hours, and 180°C for 48 hours. Following the synthesis of all of these samples x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy-dispersive spectroscopy (EDS) analyses were performed. The XRD analysis revealed anatase titanium nanoparticles formed in the 120°C and 150°C samples, this could …

Separation Of Water From Ulsd Using Superhydrophobic Ps Nanofiber Mats, Alisa G. Webel

Williams Honors College, Honors Research Projects

Superhydrophobic polystyrene nanofiber membranes have potential to separate micron scale water droplets from organic due to their hydrophobicity and small pore openings. Polystyrene nanofibers were electrospun into flat sheets and cylindrical filter membranes. The fibers were crosslinked to increase strength and reduce solubility in diesel fuel. The filters were tested and the filtration efficiency was compared to their non-crosslinked counterparts. The optimal electrospinning conditions to create superhydrophobic nanofibers were found to be 20 wt. % PS fibers at 1 mL/hr. under a current of 20kV and at a distance of 20 cm away from the ground. It was found that …

Investigation Of Degradation Of Amine Sorbent, Elijah Arendt

Williams Honors College, Honors Research Projects

The purpose of this study is to investigate the performance of amine-grafted sorbents, specifically when they are degraded at 120°C. This study varied the amine source and the amount of it in the sorbent. The additive type and the amount of it was also manipulated. The performance of sorbents is characterized by CO₂ capture capacity, which is the amount (in mmol) of CO₂ captured per gram of sorbent at 40°C. The best performing sorbents are ones that maintain their CO₂ capture capacity after degradation. When the amount of additive was manipulated, the sorbents containing 2% b.w. and …

Passivation And Potential Fluctuation Of Az31b Alloy In Alkaline Environments, Ana C. Bacco

Williams Honors College, Honors Research Projects

Magnesium (Mg) alloys are used in many industries because of their distinctive properties, but their high chemical reactivity and poor oxide film protection make them inferior. This project focused on investigating the effects of secondary phases and intermetallic particles (IMPs) on the corrosion behavior of AZ31B Mg alloy. The test solution was chloride free NaOH with varying pH levels between 10-14, as well as testing under deaerated conditions. The open circuit potential (OCP) measurements using AZ31B in static NaOH solutions showed potential fluctuation between approximately -1.6 V_SCE (active state) and -0.4 V_SCE (passive state) during the 24-h immersion. …

Effect Of Nanofiber Morphology On Pvdf Air Filter Performance, Andrew W. Marton

Williams Honors College, Honors Research Projects

Poly(vinylidene fluoride) (PVDF) can be formed into small nanofibers by electrospinning that are useful for a variety of applications. Air filters produced with PVDF are known to capture ionic particles with high efficiency. Existing studies have focused on the effects of electrospinning conditions on nanofiber morphology. In this study fibers were generated with varying morphologies. Air filters were then made from each sample and then characterized by TSI. Air filters were found to have increased resistances relative to their capture efficiencies according to particle diameter. Capture efficiencies did not correlate strongly with particle diameter, and the presence of beads in …

Filtration Of Aerosolized Oils With Layered Filter Media And Drainage Channels, Corey A. Boldon

Williams Honors College, Honors Research Projects

The purpose of this experiment is to compare the efficiency of four different filter media with two different drainage channel materials when filtering out aerosolized oil. The filter media include 2 micron stainless steel fibers, 6.5 micron stainless steel fibers, 2 micron woven glass fibers, and 6 micron woven glass fibers. The drainage channel materials are 500 micron Teflon (PTFE) and nylon mesh.

One major application that this research is targeted towards is air compressors. Air compressors use lubricating oil to minimize wear and corrosion. During operation some of this lubricating oil is aerosolized into the outgoing air stream. Inhalation …

Iso: Understanding Elective International Certification, Lauren R. Kukwa

Williams Honors College, Honors Research Projects

The purpose of this paper is to investigate elective certification specifically as it pertains to the Process Engineering II capstone project assigned at the University of Akron in the Spring Semester of 2015. The standards for certification are those needed to obtain certification in International Organization for Standardization’s 9000:2005 Quality Management standard. The ethics of a Chemical Engineering position as it pertains to the project will also be presented and similarities between elective certification and the American Institute of Chemical Engineers Code of Ethics will be noted.

Determining The Critical Micelle Concentration Of Polymer Matrix For Drug Delivery Purposes, Katie Emmert

Williams Honors College, Honors Research Projects

Targeted oral release systems have been a large topic within drug delivery systems. There are several benefits to an oral delivery including patient convenience and lower chance of infection. The colon specifically has been researched as the release media. The colon is an ideal location for a release because the pH is stable with high levels of microorganisms. Like any type of drug delivery research, there are several hurdles to overcome. In order for a drug to be released in the colon, the drug must survive the stomach and be biocompatible. This biocompatibility and pH sensitivity was created using a …

The Impact Of Shrinkage Reducing Admixtures On The Corrosion Of Steel Rebar In Concrete, Carlee C. Mccowin, Donald P. Visco Jr.

Williams Honors College, Honors Research Projects

Chemical admixtures are prepared in modern concrete to control certain performance properties, such as strength, setting-time, and workability. In this research, the corrosion inhibition properties of various shrinkage reducing admixtures in a synthetic concrete pore solution are examined. These compounds can inhibit or promote corrosion of the carbon steel rebar in concrete structures. The corrosive effects were tested by modeling the environment of concrete in a cathodic cell with a similar pH (12-13). Each shrinkage-reducing admixture (SRA) was compared to a standard reference cell. Tafel curves were used to determine the corrosion current and potential.