Membrane Science Commons^™

Separation Of Oil From A Brackish Water Stream, Kayli A. Quinton

Chemical Engineering Undergraduate Honors Theses

In the past 40 years, a variety of enhanced oil recovery (EOR) methods have been developed and applied to mature and mostly depleted oil reservoirs. Chemical and sonic stimulation are two enhanced oil recovery methods in which emulsions are created either as a primary or secondary effect. The resulting emulsion viscosity is considerably lower than that of dry crude thus increasing permeability of and recovery from pay zones. During Chemical enhanced oil recovery, caustic or preformed surfactants are injected into oil reservoirs, which results in flooding and periodic breakthrough of stable oil-water emulsions. The emulsions from chemical enhanced oil recovery …

Evapoporometry: An Effective Analytical Technique For Membrane Pore Size Characterization Of Hollow Fiber Membranes, Alex J. Moix

Chemical Engineering Undergraduate Honors Theses

A new analytical technique called evapoporometry has shown to be an effective and inexpensive method for membrane pore size characterization. This technique is based on the correlation between vapor pressure and pore size as described by the Kelvin equation. Evapoporometry has many advantages over tradition pore size characterization techniques. This technique allows for large sample sizes, uses minimal equipment, is capable of analyzing membranes within a wide range of pore sizes, and provides a highly descriptive representation of the pore distribution. This research looks at the application of evapoporometry as a technique for characterization of hollow fiber membranes. Using the …

Effects Of Magnetically Induced Micro-Mixing On Nanofiltration Performance, Guanghui Song

Graduate Theses and Dissertations

Nanofiltration (NF) is a relatively new membrane separation process mainly used for removing low molecular weight species from aqueous and non-aqueous solutions. NF membranes suffer from concentration polarization leading to membrane fouling thus compromised membrane performance. Magnetically responsive nanofiltration (NF) membranes functionalized with superparamagnetic nanoparticles (SPNs) attached to the chain ends of grafted polymer nanolayers have been shown to be effective in breaking concentration polarization at the membrane-liquid interface under an appropriate external oscillating magnetic field. Under an oscillating magnetic field, the movement of the polymer chains acts as micro-mixer leading to the suppression of concentration polarization and improved filtration …

Modified Polysulfone Nanofiltration Membrane Synthesis For Hydraulic Fracturing Water Recycle, Blake Alexander Johnson

Graduate Theses and Dissertations

The use of hydraulic fracturing has resulted in significant increases in the yield of oil and natural gas, as water pumped into wells at high pressure cracks the formations and releases the hydrocarbons that are locked in the rocks. This process has created large volumes of brackish water that is very difficult to process and is often disposed of into injection wells. Suspended solids and some dissolved solids are more readily removed, but the multivalent ions found in certain salts can precipitate in a well and complicate the reuse of flowback in future hydraulic fracturing operations.

Nanofiltration, a membrane separation …

Elevated Test Pressure Significantly Reduces Dynamic Accumulation Oxygen Transmission Rate (Astm F3136) Measurement Time For Barrier Packaging Films, Bruce A. Welt

Journal of Applied Packaging Research

Measurement of gas transmission rates of materials is important for successful package design. The dynamic accumulation (DA) method (ASTM F3136) is becoming increasingly popular for measuring oxygen transmission rate (OTR) due to its simplicity and low cost. However, measurement time increases with barrier properties of materials, limiting measurement throughput. A dynamic accumulation measurement prototype capable of operating up to 1,000 psig was developed in order to accelerate gas transfer by boosting concentration gradients via elevated absolute pressures. Results show that measurement results were independent of test pressure while measurement times were substantially reduced. These results also suggest that gas transmission …

Enhancing Grain Boundary Ionic Conductivity In Mixed Ionic–Electronic Conductors, Ye Lin, Shumin Fang, Dong Su, Kyle S. Brinkman, Fanglin Chen

Faculty Publications

Mixed ionic–electronic conductors are widely used in devices for energy conversion and storage. Grain boundaries in these materials have nanoscale spatial dimensions, which can generate substantial resistance to ionic transport due to dopant segregation. Here, we report the concept of targeted phase formation in a Ce0.8Gd0.2O2−δ–CoFe2O4 composite that serves to enhance the grain boundary ionic conductivity. Using transmission electron microscopy and spectroscopy approaches, we probe the grain boundary charge distribution and chemical environments altered by the phase reaction between the two constituents. The formation of an emergent phase successfully avoids segregation of the Gd dopant and depletion of oxygen vacancies …

Designed Synthesis Of Nanoporous Organic Polymers For Selective Gas Uptake And Catalytic Applications, Pezhman Arab

Theses and Dissertations

Design and synthesis of porous organic polymers have attracted considerable attentions during the past decade due to their wide range of applications in gas storage, gas separation, energy conversion, and catalysis. Porous organic polymers can be pre-synthetically and post-synthetically functionalized with a wide variety of functionalities for desirable applications. Along these pursuits, we introduced new synthetic strategies for preparation of porous organic polymers for selective CO₂ capture.

Porous azo-linked polymers (ALPs) were synthesized by an oxidative reaction of amine-based monomers using copper(I) as a catalyst which leads to azo-linkage formation. ALPs exhibit high surface areas of up to 1200 …

Modeling Of Nitrogen Separation From Natural Gas Through Nanoporous Carbon Membranes, Moustafa A. Soliman, A A. Al-Rabiah, Abdelhamid M. Ajbar, F A. Almalki, Omar Y. Abdelaziz

Chemical Engineering

This work presents a theoretical investigation of the use of nanoporous carbon membranes for the separation of nitrogen from natural gas. A mathematical model to predict the performance of the membrane is developed. The model is a combination of the well known dusty gas model, which describes the transfer of multi-components mixture in porous media, together with a surface diffusion model. The model is first validated using the literature results for the separation of hydrogen from hydrocarbons mixture. The model is then applied to the nitrogen-hydrocarbons system. The membrane performance is evaluated in terms of nitrogen recovery, methane loss, nitrogen …

Long Term Blood Oxygenation Membranes, Joseph V. Alexander

Theses and Dissertations--Biomedical Engineering

Hollow fiber membranes are widely used in blood oxygenators to remove carbon dioxide and add oxygen during cardiopulmonary bypass operations. These devices are now widely used off-label by physicians to perform extracorporeal blood oxygenation for patients with lung failure. Unfortunately, the hollow fiber membranes used in these devices fail prematurely due to blood plasma leakage and gas emboli formation.

This project formed ultrathin (~100nm) polymer coatings on polymer hollow fiber membranes. The coatings were intended to “block” existing pores on the exterior surfaces while permitting high gas fluxes. This coating is synthesized using surface imitated control radical polymerization.

The coating …

Biomolecule Localization And Surface Engineering Within Size Tunable Nanoporous Silica Particles, Daniel M. Schlipf

Theses and Dissertations--Chemical and Materials Engineering

Mesoporous silica materials are versatile platforms for biological catalysis, isolation of small molecules for detection and separation applications. The design of mesoporous silica supports for tailored protein and biomolecule interactions has been limited by the techniques to demonstrate biomolecule location and functionality as a function of pore size. This work examines the interaction of proteins and lipid bilayers with engineered porous silica surfaces using spherical silica particles with tunable pore diameters (3 – 12 nm) in the range relevant to biomolecule uptake in the pores, and large particle sizes (5 - 15 µm) amenable to microscopy imaging

The differentiation of …