Membrane Science Commons^™

Continuous Sorption Of Ionic Dyes Onto Nanoporous Faujasite Zeolite And The Regeneration Of The Adsorbent, Frederick O. Oshomogho, Miracle Aisosa Omorogieva

BAU Journal - Science and Technology

This study evaluates the efficiency of synthesized faujasite zeolite in the continuous removal of methylene blue from water and tests the reusability of the regenerated adsorbent. Faujasite Zeolite was synthesized from locally available aluminosilicate clay in Edo State using standard methods documented in the literature. XRF analysis affirmed the elemental composition, showing high levels of silica and alumina, which increased its adsorption capacity. SEM images depicted a crystal-clear structure with an octahedral shape and visible micro-pores on the surface. TGA showed effective thermal stability below 300 ºC, with a 10% weight loss between 28.59 ºC and 300 ºC. BET analysis …

Nanostructured Cathode Catalysts For Aem Electrolysis: From Catalyst Design To Degradation And Hydrogen Dynamics, Yamini Kumaran

Electronic Theses & Dissertations (2024 - present)

Anion exchange membrane water electrolysis (AEMWE) presents a promising pathway toward cost-effective and sustainable hydrogen production by integrating the chemical robustness of alkaline systems with the compact, zero-gap design of proton exchange membrane electrolyzers. However, the widespread implementation of AEMWE is limited by the availability of highly active and durable platinum-group-metal (PGM)-free catalysts and by an incomplete understanding of their degradation behavior under realistic operating conditions.

This dissertation focuses on the development, characterization, and mechanistic investigation of nanostructured MoNi₄–MoO₂-based electrodes for efficient and stable hydrogen generation under alkaline and membrane-integrated environments. MoNi₄–MoO₂ nanorods …

Anion Exchange Membrane Transport And Accelerated Testing Methods For Co2 Electrolyzers With Cu-Based Electrocatalyst, John C. Hendershot

LSU Doctoral Dissertations

Electrocatalytic carbon dioxide (CO₂) reduction to C₂₊ products holds promise for low carbon intensity fuels, chemicals, and food; however, durability challenges, particularly bicarbonate (HCO₃^-)and carbonate (CO₃^2-) salt precipitation, hinder their commercialization. This report considers water (H₂O) and ion transport properties of conventional anion exchange membranes (AEMs) in zero-gap membrane electrode assembly (MEA) configurations using Cu electrocatalysts. Transport characterization includes H₂O diffusion, permeability, potassium (K⁺) diffusion, and transference numbers using three commercial AEMs, including piperidinium-based (Versogen), quaternary ammonium-based (Fumasep), and imidazolium-based (Dioxide Materials) membranes. Accelerated lifetime …

Pd-Based Hydrogen Separation Membranes Synthesized Via A Liquid-Phase Route, Chase W. Thompson

Chemical and Biological Engineering ETDs

Palladium (Pd) membranes have gained significant attention for their ability to selectively separate hydrogen, a critical process for clean energy applications such as fuel cells and hydrogen storage. However, challenges such as grain growth, sintering, hydrogen embrittlement, and film uniformity limit their scalability and long-term stability. This thesis focuses on the controlled synthesis, deposition, and stability of Pd nanoparticles to optimize membrane performance for hydrogen separation. This work investigates solution-phase synthesis of Pd nanoparticles, focusing on temperature, precursor concentration, and solvent composition as key variables influencing particle growth and dispersion. Pd membranes were fabricated using nanoparticle deposition onto porous supports, …

Anion Exchange Membrane Durability For Electrochemical Co2 Reduction In Membrane Electrode Assembly Cells, Soundarzo Tasnim

LSU Master's Theses

The electrochemical reduction of CO₂ using membrane electrode assembly (MEA) cells has emerged as a promising approach for carbon capture and conversion into valuable products. This study investigates the degradation mechanisms of anion exchange membranes (AEMs) in CO₂ reduction applications, focusing on Sustainion X37-50, PiperION, and FAA-3-50. The research analyzes the impact of chemical and mechanical degradation on membrane performance, highlighting key stability challenges in long-term operation. Fourier transform infrared spectroscopy (FTIR) and electrochemical impedance spectroscopy (EIS) were employed to monitor functional group stability and ionic conductivity loss over extended operation. The results indicate that hydroxide-induced degradation leads to nucleophilic …

Optimization And Dft Study For Boosted Electooxidation Of Formic Acid At Niox Modified Pt Using Urea Derivatives As Blending Fuels, Aya Saada

Biochemical Engineering

This paper addresses the enhancement of formic acid electrooxidation (FAO) at Pt and Pt-NiOx nanoparticles based-catalysts assisted with urea derivatives as blending fuels. Blending formic acid with various ratios of urea derivatives showed noticeable enhancements of FAO as demonstrated by a favorable negative shift of its onset potential (Eonset) and increase of its peak current density concurrently with suppression of the amount of CO poisoning reaction intermediate. Among all the used derivatives, phenyl urea (PU) showed superior enhancing effect towards the direct FAO with a minimal CO formation together with a favorable negative shift of Eonset by 150 mV. The …

Integrating Medical Plastic Waste Pyrolysis And Circular Economy For Environmental Sustainability, Attia Attia, Mohamed Bassyouni Prof., Reem Nasser Eng., Moataz El-Bagoury Eng., Islam Shaker Eng., Yasser Elhenawy Prof., Dina Aboelela Dr.

Biochemical Engineering

A critical assessment of pyrolysis technologies and reactor designs was discussed, highlighting various reactor configurations. This study explored the influence of catalysts, temperature, heating rate, and residence time on the pyrolysis process, and addressed their effects on product distribution and composition. Safety considerations and strategies for mitigating the potential environmental impacts of pyrolysis were presented. Comparative analyses of the environmental impacts of traditional waste disposal methods versus pyrolysis-based approaches provided insights into the potential reduction of greenhouse gas emissions and other pollutants. The circular economy approach was explored in the context of medical plastic waste pyrolysis. The potential for closing …

Membrane Reactor Modeling And Optimization For Hydrogen Production, Ayooluwa Tomiwa Akintola

Graduate Theses, Dissertations, and Problem Reports (ETD)

There has been an ongoing trend toward cleaner fuels for more environmentally benign forms of energy generation. Recently, hydrogen has been identified as a clean fuel for energy generation. However, the most established, efficient, and widely utilized technique for producing hydrogen remains the steam methane reforming (SMR) in the presence of catalyst. Unlike other fossil fuels, utilizing methane from natural gas in an SMR process to produce hydrogen emits less, but yet a notable sum of carbon dioxide. Furthermore, the endothermic nature of SMR reactions imply that there is a high energy requirement to obtain a substantial amount of hydrogen …

Synthesis, Characterization And Testing Of Graphene-Based Materials For Proton-Exchange Membrane Fuel Cell Catalysts, Hassan Shirzadi Jahromi

Dissertations

The requirement for low cost and efficient catalysts for fuel cells motivated the proposed research on Nitrogen-doped reduced graphene oxide (N-rGO) integrated with transition metal zeolitic imidazolate frameworks (ZIFs). Synthesis, characterization and performance evaluation of the newly synthesized nitrogen-doped graphene oxide-based catalysts for Proton Exchange Membrane Fuel Cells (PEMFCs) constitutes the main objective of this thesis.

The synthesis of N-rGO combined with cobalt, nickel, or iron ZIFs was carried out using wet chemical methods followed by one step pyrolysis at 900°C, resulting in catalysts with highly porous structures and uniform metal nanoparticle distribution. These were characterized for structure, microstructure, composition …

Voltammetric Determination Of Hydrogen Peroxide At Decorated Palladium Nanoparticles/Poly 1,5- Diaminonaphthalene Modified Carbon-Paste Electrode, Ziad Khalifa, Mohamed Fathi Abo Oura, Magdi Abdelazzem, Ablah Hathoot

Chemical Engineering

In this work, palladium nanoparticles (PdNPs)/p1,5-DAN/ carbon paste electrode (CPE) and p1,5-DAN/CPE sensors have been developed for determination of hydrogen peroxide. Both sensors showed a highly sensitive and selective electrochemical behaviour, which were derived from a large specific area of poly 1,5 DAN and super excellent electroconductibility of PdNPs. PdNPs/p1,5-DAN/CPE exhibited excellent performance over p1,5-DAN/CPE. Thus, it was used for detecting hydrogen peroxide (H2O2) with linear ranges of 0.1 to 250 μM and 0.2 to 300 μM as well as detection limits (S/N= 3) of 1.0 and 5.0 nM for square wave voltammetry (SWV) and cyclic voltammetry (C.V) techniques, respectively. …

Exploring The Morphological Surface Resistance And Optical Absorption Of Thin Black Carbon Nanotube Films For Electronic And Optoelectronic Devices, Ziad Khalifa, Sameh Osama Abdellatif

Chemical Engineering

This study investigates the optical and electrical properties of thin black films of carbon nanotubes (CNTs) fabricated under various conditions to explore their potential integration as either a perfect broadband absorber or enhanced counter electrode. The study involves SEM measurements, surface resistance measurements, and UV–Vis. spectrometer analysis. The results show that the CNT thin films exhibit high electrical conductivity and strong light absorption across various wavelengths. Optically, we investigated the impact of varying the growth temperature and catalyst temperature on the absorption profile of the thin films. The fabricated and deposited CNTs showed broadband absorption spectra, reaching 92.8% of the …

Process Simulation For Converting Co2 Emissions From The Cementindustry To Dimethyl Ether, Nour Abou Seada, Dina Aboelela

Biochemical Engineering

Climate change is the leading severe problem in the twenty-first century, which is associated with greenhouse gas emissions,carbon dioxide that is the foremost cause of global warming and super greenhouse effect. In this concern, to avoid hazardousproblems, the steady stream of CO2 effluents existing in the atmosphere must be transformed to beneficial products for beingused as an abundant chemical feedstock. Implementing a new green strategy, which is known for the catalytic hydrogenationof CO2 into alternative fuels and valuable chemicals, will be a long-lasting solution to alleviate CO2 emissions. In this paper,a process simulation showing the synthesis of dimethyl ether (DME) …

Hydrogen Production From Microbial Electrolysis Cells Powered With Microbial Fuel Cells, Dina Aboelela

Biochemical Engineering

No abstract provided.

Functionalized Microfiltration Membranes For Aerosol Capture To Chloro-Organic Degradation, Rollie George Mills

Theses and Dissertations--Chemical and Materials Engineering

The environmental remediation of water and air sources is a challenging field, due to widespread contamination, pollutant variety, and efficiency of existing treatment options. Remediation of certain pollutants, such as per- and polyfluorinated chemicals (PFAS), polychlorinated biphenyls (PCBs), volatile organic compounds (VOCs), and viral aerosols, has shown promise via adsorptive, degradative, or filtration-based processes, each with their respective advantages and limitations. Membrane technology is one option that has exhibited considerable pollutant removal from environmental sources via reverse osmosis (RO) filtration, but is limited by low permeabilities and lack of pollutant detoxification. With the support of NIEHS and NSF, the functionalization …

Performance And Fouling During Bioreactor Harvesting, Da Zhang

Graduate Theses and Dissertations

Tangential flow filtration has many advantages for bioreactor harvesting as the permeate could be introduced directly to the subsequent capture step, the process is easy to scale up, and fouling of the filter is limited by the cross flow. However, membrane fouling has limited its widespread use. This is particularly problematic given the high cell densities encountered today. Here a reverse asymmetric commercial membrane, BioOptimal™ MF-SL (Asahi Kasei), where the more open surface faces the feed stream, and the tighter barrier layer faces the permeate stream, has been investigated for bioreactor harvesting. The open surface contains pores up to 40 …

Optimizing Virus Prefiltration For Biopharmaceutical Manufacturing, Solomon Isu

Graduate Theses and Dissertations

Virus filters are single-use devices that use a size-based separation process. In virus filters, contaminating virus particles are retained while the therapeutic molecules pass through the membrane pores. Virus filters are an essential component of the overall virus clearance strategy. Sections 1 and 2 of this dissertation provide an introduction and extensive review of monoclonal antibody (mAb) process development, where virus filtration is pivotal. In section 3, prefiltration studies were performed with an industrially relevant IgG1 type mAb using adsorptive and size-exclusion-based prefilters with different mechanisms of action. This mAb has an isoelectric point range of 7.1 to 8.0 and …

Microcystin-Lr Removal From Water Via Enzymatic Linearization And Ultrafiltration, Abelline Fionah, Cannon Hackett, Hazim Aljewari, Laura Brady, Faisal Alqhtani, Isabel C. Escobar, Audie K. Thompson

Chemical Engineering Faculty Publications and Presentations

Microcystin-LR (MC-LR) is a toxin produced by cyanobacteria that can bloom in freshwater supplies. This study describes a new strategy for remediation of MC-LR that combines linearization of the toxin using microcystinase A, MlrA, enzyme with rejection of linearized byproducts using membrane filtration. The MlrA enzyme was expressed in Escherichia coli (E. coli) and purified via a His-tag with 95% purity. Additionally, composite membranes made of 95% polysulfone and 5% sulfonated polyether ether ketone (SPEEK) were fabricated and used to filter a solution containing cyclic and linearized MC-LR. Tests were also performed to measure the adsorption and desorption of MC-LR …

Scale-Up Of Flow-Electrode Capacitive Deionization Method For Hard Water Softening, Noah Henry

Williams Honors College, Honors Research Projects

This study’s purpose is to further document a capacitive deionization design that could be capable of purifying H₂O at a household scale where clean water is otherwise unobtainable in applicable regions of the world. The hypothesis behind this study was continuously larger scaled electrochemical cell-units would increase their water softening capabilities in sustainable fashion. The trend at which performance will scale is currently unknown. The units studied were constructed using graphite plates, anion exchange membranes, cation exchange membranes, and Teflon channels. Three streams, two being CaCl₂ solutions in DI H₂O (one being concentrated with CaCl …

Abiotic Sensor For Electrochemical Determination Of Chlorpyrifos In Natural Water Based On The Inhibition Of Silver Nanoparticles Oxidation, Ziad Khalifa, Moustafa Zahran, Magdy Zahran, Magdi Abdelazzem

Chemical Engineering

Chlorpyrifos, organophosphorus pesticide, is a persistent organic pollutant that may cause serious health problems. Herein, a simple, green, and sensitive electrochemical inhibition sensor based on silver nanoparticles (AgNP)-modified glassy carbon (GC) electrode was developed for the determination of chlorpyrifos in natural water for the first time. The chemical reduction technique based on natural reducing and capping agents such as dissolved organic matter (DOM), natural latex (NL) and mucilage was employed for AgNP synthesis. DOM-AgNP, NL-AgNP, and Mucilage-AgNP were immobilized on GC by sticking technique under the same voltammetric and electrolytic conditions. The oxidation behavior of the three modified electrodes was …

Dynamic Study Of Mo/Zsm-5 Catalyst For Ch4 Dehydroadomation, Hadi Yahya Almusawa

Graduate Theses, Dissertations, and Problem Reports (ETD)

Methane dehydroaromatization (CH₄-MDA) is a highly promising venture for natural gas utilization/exploitation, i.e., direct conversion of methane (CH₄) to liquid aromatics (benzene) and hydrogen. This process is a catalytic reaction and therefore, is subject to all the advantages and constraints of catalysis. This study discussed the structure and reactivity of Mo/ZSM-5 zeolite catalysts and their effect on the active conversion of methane to valuable aromatic products such as benzene: 1) The preparation and characterization of Mo/ZSM-5, which are crucial steps in any catalytic reaction process since a better performing catalyst consequently leads to better outcomes; 2) …

Bimetallic Nanoparticles Integrated Membranes For Groundwater Remediation: Synthesis, Characterization And Applications, Hongyi Wan

Theses and Dissertations--Chemical and Materials Engineering

The detoxification of chlorinated organics from groundwater, such as trichloroethylene (TCE), tetrachloroethylene (PCE), polychlorinated biphenyl (PCB) and carbon tetrachloride (CTC), is a challenging area. Reductive dechlorination has been investigated using iron and iron-based nanoparticles, such as bare Fe, sulfidized Fe (S-Fe) and palladized Fe (Pd-Fe). However, issues including particle agglomeration, difficulties in recycling and particle leaching have been reported to hinder the application and wide usage of these techniques. The integration of nanoparticles and membranes can address these issues because of the large surface area, stability, and the potential for versatile functionalities. In this study, commercial polyvinylidene difluoride (PVDF) microfiltration …

Nanostructured Metal Thin Films As Components Of Composite Membranes For Separations And Catalysis, Michael J. Detisch

Theses and Dissertations--Chemical and Materials Engineering

Novel metallic thin film composite membranes are synthesized and evaluated in this work for improved separations and catalysis capabilities. Advances in technology that allow for improved membrane performance in solvent separations are desirable for low molecular weight organic separation applications such as those in pharmaceutical industries. Additionally, the introduction of catalytic materials into membrane systems allow for optimization of complex processes in a single step. By adding a nanostructured metallic thin film to its surface, a polymer membrane may be modified to exhibit these improved properties. Using magnetron sputtering, thin metal films may be deposited on commercially available membranes to …

The Development Of Temperature And Ph Responsive Hydrogels And Membranes For Selective Sorption Of Perfluoroorganics And Nanoparticle Integrated Catalytic Degradation Of Pcb, Anthony Saad

Theses and Dissertations--Chemical and Materials Engineering

The functionalization and use of responsive and catalytic polymeric membranes and materials were explored for contaminant capture and degradation. While membranes have a wide variety of uses across multiple industries, the inclusion of materials that are temperature and pH responsive in the membrane pore domain yields a wide range of applications and possibilities for water treatment. Temperature and pH responsive polymers, as well as controlled nanostructured materials, were synthesized in membrane pores for advanced adsorption-desorption and catalytic treatment of emerging organic contaminants in water. In this study, supported by the NIEHS, poly-N-isopropylacrylamide (PNIPAm) was used as a model thermo-responsive polymer, …

Engineered Carbon-Nanocatalyst Composites And Carbon Mixed ‎Matrix Membranes ‎For Water And Wastewater Treatment ‎, Mojtaba Abolhassani

Graduate Theses and Dissertations

Carbonaceous materials such as graphene oxide, and activated ‎carbon have a wide range of ‎applications in water and wastewater treatment due to the high surface ‎area, unique structure, ‎and chemical and thermal stability. Carbon-based materials can be used as a ‎membrane, an ‎adsorbent, a support for nanomaterials, or ‎as a filler within membranes to remove contaminants ‎from water. In this research, the specific carbon materials and how their properties influence their ‎use and performance in ‎specific engineering applications is explored. ‎

Here, membrane filtration and adsorption/degradation of the water and wastewater using carbon-‎based material are investigated. The research firstly focuses …

Thin-Film Block Copolymers (Bcps) Self-Assembly As Versatile Patterning Scheme For Functional Nanomaterials, Le Zhang

LSU Master's Theses

Nanopattern generation is required for building various structural entities in every production process that involves nanostructures. Advancing nanopatterning technologies play an important role in developing and broadening the current nanopatterning technologies to meet up with the ever-demanding requirements in the realm of smaller feature sizes, smoother line-edge roughness (LER) and facile pattern transfer in pursuit of faster computer processors, better electrocatalysts and more compact and intelligent sensors, etc. Conventionally, patterning needs are heavily relied on photolithography, a technique that dominate chip-making industry for more than 50 years. However conventional photolithography is bounded by inherent resolution limits and difficult to be …

Removal Of Carbamazepine From Drinking Water, Paola Marrero-Rivera, Adam Johnson, Jordan Alex Gadberry, Juan Rodriguez, Thomas Krumpolc, Zach Wiese

Chemical Engineering Undergraduate Honors Theses

Due to the increasing prevalence of prescription medication over the past few decades, pharmaceuticals have accumulated in various water sources. This has become a public health concern because many pharmaceuticals have limited research on the effects of chronic low-level exposure.One pharmaceutical of interest that has been detected in water sources is carbamazepine. Carbamazepine (CBZ) is a common pharmaceutical prescribed for the treatment of seizure disorders, neuropathic pain, and various psychological disorders. It’s mechanism of action is “sodium channel blocking,” which is the impairment of conduction of sodium ions in sodium channels. This, in effect, reduces nervous-system conductivity in key areas …

Microbial Desalination Cells With Efficient Platinum Group Metal-Free Cathode Catalysts, Morteza Rezaei Talarposhti

Chemical and Biological Engineering ETDs

Iron-nitrogen-carbon based catalyst was used at the cathode of a microbial desalination cell (MDC) and compared with platinum (Pt) and activated carbon (AC) cathode. Fe-N-C catalyst was prepared using nicarbazin (NCB) as organic precursor by sacrificial support method (SSM). Rotating ring disk electrode (RRDE) experiments shows that Fe-NCB had higher electrocatalytic activity compared to AC and Pt. The utilization of Fe-NCB into the cathode improved substantially the performance output with initial maximum power density of 49±2 μWcm^-2 in contrast to Pt and AC catalysts which have shown lower values of 34±1 μWcm^-2 and 23.5±1.5 μWcm^-2, respectively. …

Ion Size Effects On The Properties Of Charge Regulating Electric Double Layers, Divya Jyoti Prakash

Nanoscience and Microsystems ETDs

The behavior of charged interfaces formed in various systems like colloidal solution, fuel cells, battery, electro-deposition, catalysis is governed by the properties of electrical double layer(EDL). Civilized model with charge regulation boundary condition determined by thermodynamic equilibrium at the interface has been used to model electrical double layer and shows that size of the solvent plays a critical role in characterizing the properties of EDL using classical density functional theory.This thesis investigates the impact of ion size in electrolyte solutions on the electrical double layer formed at the interface using a similar model. It is found that ion size greatly …

Tunable Nanocomposite Membranes For Water Remediation And Separations, Sebastián Hernández Sierra

Theses and Dissertations--Chemical and Materials Engineering

Nano-structured material fabrication using functionalized membranes with polyelectrolytes is a promising research field for water pollution, catalytic and mining applications. These responsive polymers react to external stimuli like temperature, pH, radiation, ionic strength or chemical composition. Such nanomaterials provide novel hybrid properties and can also be self-supported in addition to the membranes.

Polyelectrolytes (as hydrogels) have pH responsiveness. The hydrogel moieties gain or lose protons based on the pH, displaying swelling properties. These responsive materials can be exploited to synthesize metal nanoparticles in situ using their functional groups, or to immobilize other polyelectrolytes and biomolecules. Due to their properties, these …

Biomimetic Devices To Drive A Thermodynamically Uphill Reaction Using Light And To Degrade Industrial Waste Stream Components, Madison Joanne Sloan

Theses and Dissertations--Chemistry

Given the amount of industrial waste produced each year, as well as the accruing amount of greenhouse gases in our atmosphere produced by the burning of fossil fuels, it is imperative that humanity develop environmentally-sustainable sources of energy and methods of remediation. Nature achieves both of these by use of enzymes as catalysts, inspiring interest in designing biomimetic systems capable of harnessing clean energy and remediating industrial waste. This study examined the ability of enzymes in electrochemical and convective flow systems to achieve these tasks. The first portion studied the incorporation of enzymes into an electrochemical system to drive the …