Complex Fluids Commons^™

Development Of Lignin-Based Copolymers And Polymer Blends, David Chem

Graduate Theses and Dissertations

Increasing industrial interest in reducing fossil fuels in virgin polymer production and incorporating bio-based polymeric materials has led researchers to explore the potential of utilizing plant-based polymers such as lignin. Chapter 1 of this thesis presents a comprehensive overview of copolymerization and blending techniques for lignin and synthetic polymers, emphasizing different types of modifications and copolymerization techniques as well as key parameters such as temperature, reaction time, pH level, and solution compositions. These valorization methods are directed towards the development of high-value lignin-based materials with properties well-suited for various commercial applications. Chapter 2 offers a fundamental exploration into the amination …

Influence Of Metal-Coordinating Comonomers On The Coordination Structure And Binding In Magnetic Poly(Ionic Liquid)S, Kayla Foley, Lucas Condes, Keisha B. Walters

Chemical Engineering Faculty Publications and Presentations

A poly(ionic liquid) (PIL), poly(acrylamide-co-diallyl dimethylammonium chloride), was systematically complexed with Co²⁺, Fe³⁺, and Co²⁺/Fe³⁺ (mixed) at different molar equivalencies to form a series of magnetic PILs (MPILs). These novel MPILs were utilized to examine molecular structure and binding between the polymer and metal species using comprehensive spectroscopic studies in both dry and liquid states. FTIR, X-ray photoelectron, UV-vis, and Raman spectroscopies showed evidence of metal coordination of both the iron and cobalt chloride species with the acrylamide comonomer. Using AC susceptibility measurements, the MPILs were found to have magnetic properties …

Measuring Plume Concentration Variations Under Neutral Atmospheric Conditions, Daniel Williams

Chemical Engineering Undergraduate Honors Theses

Hazardous gases are increasingly becoming a large safety concern as the world continues to grow and industrialize. The modeling of when hazardous gases breach containment is an extremely important objective of consequence assessment planning and response. To improve the understanding of the variability inherent in passive gas releases, a test program to demonstrate the variability of gas concentration measurements at different location in a passive gas plume released from an area source in the ultra-low speed wind tunnel at the Chemical Hazards Research Center. A Flame Ionization Detector was used to measure the concentration of the source cloud. Methane was …

Surface-Driven Instabilities At Oil-Water Interfaces, Anelisse Claros Mendieta

Graduate Theses and Dissertations

Fluid-fluid interactions are such a wide area and can be observed in different scenarios such as geothermal systems, waterflooding of reservoirs, oil recovery, and water treatment processes. This thesis aims to deepen the understanding of fluid-fluid interactions which include Marangoni flows, charge related instabilities, and surface activity. This thesis studied the interactions of micrometer-sized droplets of an oil (toluene) with surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium …

Investigative Study Of Microalgal And Electrochemical Wastewater Treatment Systems And Modeling Of The Wafer-Enhanced Electrodeionization Using Supervised Learning, Humeyra Betul Ulusoy Erol

Graduate Theses and Dissertations

Wastewater has a serious impact on environment and public health due to its high concentration of nutrients and toxic contaminants. Without proper treatment, excess nutrients discharged in wastewater can cause a damage to the ecosystem such as undesirable pH shifts, cyanotoxin production, and low dissolved oxygen concentrations.

Main objectives of this dissertation work were to investigate i) the biofuel potential of P. cruentum when grown in swine wastewater, ii) the influence of four most commonly used ion exchange resins on the system efficiency and selectivity for the removal of sodium, calcium, and magnesium ions, and iii) the modeling of wafer-enhanced …

Applications Of Ionic Liquids In Membrane Separation, Mohanad Kamaz

Graduate Theses and Dissertations

Ionic liquids represent an emerging attractive material in membrane technology. The central theme of this doctoral dissertation is to develope novel membranes using ionic liquids. Two different approaches were used to prepare ionic liquid membranes including the immobilization of ionic liquid within the membrane pores or the use of pressure assembly method to deposit a selective ionic liquid layer on the top membrane surface.

In chapter 2, imidazolium ionic liquids with three different alkyl halides were successfully synthesized and used to prepare supported ionic liquid membranes (SILMs). SILMs preraper were tested for aqueous and nonaqueous applications. For nonaqueous applications, the …

Covalent Organic Frameworks For The Capture, Fixation, Or Reduction Of Co2, John Ozdemir, Imann Mosleh, Mojtaba Abolhassani, Lauren F. Greenlee, Robert T. Beitle Jr., M. Hassan Beyzavi

Chemical Engineering Faculty Publications and Presentations

Covalent organic frameworks (COFs) are porous crystalline organic polymers which have been the subject of immense research interest in the past 10 years. COF materials are synthesized by the covalent linkage of organic molecules bonded in a repeating fashion to form a porous crystal that is ideal for gas adsorption and storage. Chemists have strategically designed COFs for the purpose of heterogeneous catalysis of gaseous reactants. Presented in this critical review are efforts toward developing COFs for the sequestration of CO2 from the atmosphere. Researchers have determined the CO2 adsorption capabilities of several COFs is competitive with the highest surface …

The Synthesis, Purification, And Characterization Of The P3 Peptoid, Myles Joyce

Chemical Engineering Undergraduate Honors Theses

The relatively young field of nano-systems has vast applications over various different fields. Peptoids (peptide analogues) and their uses are consistently investigated components of these nano-studies. A particularly interesting group of peptoids are able to self-assemble into secondary structures under the right conditions. The P3 peptoid is able to form microspheres if properly synthesized and purified. Microspheres are frequently studied due to their low surface area to volume ratios. This unique aspect of microspheres makes them an excellent candidate for drug delivery systems; however, these systems must also be robust so that the desired compound can be encapsulated within the …

Development Of Microdialysis Probes In Series Approach Toward Eliminating Microdialysis Sampling Calibration: Miniaturization Into A Pdms Microfluidic Device, Randy Espinal Cabrera

Graduate Theses and Dissertations

A new microdialysis sampling method and microfluidic device were developed in vitro. The method consisted of using up to four microdialysis sampling probes connected in series to evaluate the relative recovery (RR) of different model solutes methyl orange, fluorescein isothiocyanate (FITC)-dextran average mol. wt. 4,000 (FITC-4), FITC-10, FITC-20, and FITC-40. Different flow rates (0.8, 1.0, and 1.5 µL/min) were used to compare experimentally observed relative recoveries with theoretical estimations. With increasing the number of probes in series, the relative recovery increases and ~100% (99.7% ± 0.9%) relative recovery for methyl orange was obtained. For larger molecules such as fluorescein isothiocyanate …

Particle Image Velocimetry Design & Installation, Zach Ritchie

Mechanical Engineering Undergraduate Honors Theses

This work will mainly focus on the design, construction, and installation of the Particle Image Velocimetry (PIV) system in the Chemical Hazards Research Center wind tunnel. The PIV system utilizes a Class IV (double pulsed) laser, optics to produce a light sheet, timing circuitry, and a high-resolution camera (with buffered output) to measure a system’s velocity (two-dimensional) field by determining the displacement of particles over the time between laser pulses. For maximum mobility and functionality, the PIV system was installed in the center of the tunnel on a moveable cart with the laser and camera mounted to an adjustable support. …

A Computational Study Of The Potential For Lng Tanker Polystyrene Foam Insulation Failure Under Fire Exposure, Jeffrey David Martinez

Graduate Theses and Dissertations

Liquefied natural gas is shipped across the oceans in large marine carriers. The carriers house the LNG using several different insulation systems. One of these systems involves large aluminum spheres insulated with polystyrene foam. Polystyrene foam is very susceptible to heat degradation. This raised issues as to the extent of possible insulation failure caused by a large ship fire. Experiments were done investigating the nature of polystyrene’s thermal degradation, notably by Brauman, Chen, and Matzinger and Butler. A large scale investigation was also performed by Sandia National Laboratory. However, computational modeling of the degradation was lacking. This work set out …

Novel Separation Methods Using Electrodialysis/Electrodeionization For Product Recovery And Power Generation, Alexander Miguel Lopez-Rosa

Graduate Theses and Dissertations

The use of electrodialytic separations for the purification of products has been a vital technique for the past 50 years in the chemical industry. Originally used for demineralization and desalination, electrodialysis and its counterparts have expanded to assist in product purification, waste and hazard removal, and power generation. This research focused on the development of high purity organic acids purification with low power requirements. Work resulted in the development of a new type of electrodialysis process, specifically the use of ionic liquids as a secondary solvent for the development of dual solvent electrodialysis. Through dual solvent electrodialysis, ions were recovered …

Characterization And Quantification Of Monomers, Oligomers, And By-Products From Xylan During Biomass Pretreatment, Ching-Shuan Lau

Graduate Theses and Dissertations

Biomass pretreatment generates inhibitory products, which reduce the overall yield of xylose for ethanol production. Understanding of hemicellulose depolymerization into xylose is essential to identify the pretreatment conditions that maximize xylose formation, but minimize the generation of these inhibitory products, such as formic acid and furfural. Thus, the goal of this project is to understand how dilute acid pretreatment parameters affect hemicellulose depolymerization, maximize xylose concentrations, and minimize by-products formation.

To progress towards this goal, rates and mechanisms of hemicellulose release must be determined. Birchwood xylan was used as the starting material to produce xylose oligomers. The hydrolyzed birchwood xylan …

Plasmonic Pervaporation Via Gold Nanoparticle-Functionalized Nanocomposite Membranes, Aaron Russell

Graduate Theses and Dissertations

Butanol derived from biological feedstocks has significant potential as a liquid fuel source, but the separation methods used in its production can be prohibitively expensive and are therefore currently the subject of extensive research. Pervaporation is a promising membrane process that is effective in butanol separations, but involves a large energy demand. This study examines the possibility of increasing flux and energy efficiency in pervaporation via plasmonic heating of gold nanoparticle-functionalized, polymer nanocomposite membranes (AuNCMs) in lieu of conventional feed heating. An economic analysis demonstrated that plasmonic pervaporation could achieve significant reductions in energy usage and utility cost in butanol …

Degradation Of Polystyrene Foam Under Radiant Heat Flux, James Butler

Graduate Theses and Dissertations

As the demand for liquefied natural gas has increased, safety concerns about the performance of transport vessels under fire conditions have been raised. Current codes for the sizing of the pressure relief systems require that the vessels are able to withstand an emmissive heat flux of 108kW/m2 and do not take into account the effects of insulation loss due to thermal decomposition of the insulation materials. To address this possible oversight in the current code models were presented to a working group organized by the Society of International Gas Tanker and Terminal Operators Ltd. focusing on the decomposition rate of …

L'Oreal Waste Minimization, Caitlin Burns, Joe Baugh, Allen Busick, Ryan Black, Emily Evans, Matthew Margis

Chemical Engineering Undergraduate Honors Theses

The purpose of this design project is to reduce the amount of waste being generated at L’Oreal’s North Little Rock manufacturing facility. To accomplish this, the design team visited the North Little Rock manufacturing facility to examine the areas producing the most waste. After gaining a detailed understanding of these areas, the UP1 production line was identified as one of the largest opportunities for waste reduction in the L’Oreal manufacturing facility. In the UP1 processing area, mascara is mixed in large mixing tanks and then pumped in to barrels to be packaged. The 2,000 liter and 1,000 liter Olsa tanks …

Kinetics Determination Of Soybean Oil Transesterification In The Design Of A Continuous Biodiesel Production Process, Irwin Jacob, Ed Clausen, Danielle Julie Carrier

Biological and Agricultural Engineering Undergraduate Honors Theses

One-step batch transesterification consisting of three stepwise reversible reactions of pure soybean oil with methanol was conducted at two different mixing speeds (600 and 300 rpm) to produce soybean oil fatty acid methyl esters (biodiesel). In both batch reactions, sodium methoxide (1.09 wt% based on soybean oil) was used as the catalyst, the reaction temperature was 60oC, and the methanol-to-oil molar ratio was 6:1. The objectives were to determine and/or investigate: 1) the mechanism and order of the reaction, 2) the reaction rate constants, 3) the effect of changes in mixing intensity on the reaction rate, 4) the comparison of …