Catalysis and Reaction Engineering Commons^™

Winning Results Of The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Winning Works From Journal Of Electrochemistry: The 2Nd Xiamen University Short Video Abstract Contest For Science And Technology Journal Papers, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

2024 "Electrochemical Research Paradigms" Summer School Successfully Held, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Upcoming Meeting-The 1St Young Investigator Symposium On Electrosynthesis, Chinese Chemical Society, Chinese Society Of Electrochemistry (Cse)

Journal of Electrochemistry

No abstract provided.

Investigation Of Heavy Metal Composition And Associated Health Risks From Selected Groundwater Wells In Temeke, Dar-Es-Salaam, Justin M. Jeremiah

Tanzania Journal of Engineering and Technology (TJET)

Water quality continues to be the challenge to residents in Dar es Salaam due to various anthropogenic activities in the city. This study was conducted to assess groundwater quality by determining concentrations of heavy metals. Both probability and Nonprobability sampling techniques were used to collect samples from 40 groundwater wells in 24 wards of Temeke municipal and analysed using Microwave Plasma Atomic Emission Spectrometer (Agilent 4210 MP-AES) at the Geochemistry Laboratory of the University of Dar es Salaam. Results indicated varying heavy metal concentrations ranging from 0.71 ± 0.08 to 6.64 ± 0.21 mg/l for As, 0.02 ± 0.01 to …

Professor Yong Yang, The Editorial Board Member Of Journal Of Electrochemistry, Is Elected As A Fellow Of The Electrochemical Society, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

First Announcement Of 76th Annual Meeting Of The International Society Of Electrochemistry, International Society Of Electrochemistry (Ise)

Journal of Electrochemistry

No abstract provided.

Series Reports From Professor Wei’S Group Of Chongqing University: Advancements In Electrochemical Energy Conversions (1/4): Report 1: High-Performance Oxygen Reduction Catalysts For Fuel Cells, Fa-Dong Chen, Zhuo-Yang Xie, Meng-Ting Li, Si-Guo Chen, Wei Ding, Li Li, Jing Li, Zi-Dong Wei

Journal of Electrochemistry

Two major challenges, high cost and short lifespan, have been hindering the commercialization process of low-temperature fuel cells. Professor Wei’s group has been focusing on decreasing cathode Pt loadings without losses of activity and durability, and their research advances in this area over the past three decades are briefly reviewed herein. Regarding the Pt-based catalysts and the low Pt usage, they have firstly tried to clarify the degradation mechanism of Pt/C catalysts, and then demonstrated that the activity and stability could be improved by three strategies: regulating the nanostructures of the active sites, enhancing the effects of support materials, and …

Kai Wu, The Editorial Board Member Of Journal Of Electrochemistry And Chief Scientist Of Catl, Receives The National Science And Technology Progress Award, Editorial Office Of J.Electrochem.

Journal of Electrochemistry

No abstract provided.

Sorbitol-Electrolyte-Additive Based Reversible Zinc Electrochemistry, Qiong Sun, Hai-Hui Du, Tian-Jiang Sun, Dian-Tao Li, Min Cheng, Jing Liang, Hai-Xia Li, Zhan-Liang Tao

Journal of Electrochemistry

The unstable zinc (Zn)/electrolyte interfaces formed by undesired dendrites and parasitic side reactions greatly hinder the development of aqueous zinc ion batteries. Herein, the hydroxy-rich sorbitol was used as an additive to reshape the solvation structure and modulate the interface chemistry. The strong interactions among sorbitol and both water molecules and Zn electrode can reduce the free water activity, optimize the solvation shell of water and Zn²⁺ ions, and regulate the formation of local water (H₂O)-poor environment on the surface of Zn electrode, which effectively inhibit the decomposition of water molecules, and thus, achieve the thermodynamically stable …

Response To Replication Stress And Maintenance Of Genome Stability By Wrn, The Werner Syndrome Protein, David K. Orren, Amrita Machwe

Markey Cancer Center Faculty Publications

Werner syndrome (WS) is an autosomal recessive disease caused by loss of function of WRN. WS is a segmental progeroid disease and shows early onset or increased frequency of many characteristics of normal aging. WRN possesses helicase, annealing, strand exchange, and exonuclease activities and acts on a variety of DNA substrates, even complex replication and re- combination intermediates. Here, we review the genetics, biochemistry, and probably physiological functions of the WRN protein. Although its precise role is unclear, evidence suggests WRN plays a role in pathways that respond to replication stress and maintain genome stability particularly in telomeric regions.

Activity Descriptors As Tools For Designing Highly Efficient Electrocatalysts For Water Splitting, Aya Gomaa

Theses and Dissertations

There is an uprising urge to design efficient, active, and durable catalysts to achieve sustainable hydrogen production. The unambiguity of which material should be used pushed the scientific community to devote enormous efforts in exploring different elements with different ratios on trial and error bases. However, the bridge between the theoretical calculation and the experiments introduced a new realm of designing efficient catalysts by introducing the concept of activity descriptors. In the first part of the thesis, the ability to convert waste stainless steel (SS) 316L meshes into highly efficient and durable oxygen evolution reaction (OER) catalysts is demonstrated. The …

Recent Advance In Electrochemical Dehalogenative Deuteration, Peng-Fei Li, Guang-Sheng Kou, Li-Ping Qi, You-Ai Qiu

Journal of Electrochemistry

In recent years, the incorporation of deuterium atoms into organic compounds has emerged as a vital focus in the development of pharmaceutical molecules. This trend is driven by the increasing recognition of the significance of compounds containing deuterium atoms across various domains, including materials and biopharmaceuticals, where they have found widespread applications in mechanistic studies within the realms of chemistry and biology. Meanwhile, organic electrochemistry, as a relatively environmentally friendly catalytic mode with broad adaptability to redox reactions, has emerged as a crucial alternative to traditional halogen-deuterium exchange in the context of the reduction deuteration of halides. This approach circumvents …

Comparison Of Ligands In Palladium-Catalyzed Electrochemical Allyl 4-Pyridinylation, Wei-Jie Ding, Chun-Hui Yang, Zhong-Tao Feng, Shi-Rong Lu, Xu Cheng

Journal of Electrochemistry

4-CN-pyridine is a widely applied 4-pyridinylation reagent for diverse transformations. Conventionally, the reaction proceeds via an open-shell radical cross-coupling pathway. Following our previous study, in this work, we report the Pd-catalyzed allyl 4-pyrinylation reaction under electrochemical conditions. The reaction proceeds via radical-polar crossover pathway in which the role of phosphine ligand in reactivity and selectivity was extensively investigated.

Nickel-Catalyzed Α-Arylation Of Α-Cyanoacetates Enabled By Electrochemistry, Zi-Meng Li, Zhang-Jian Li, Anat Milo, Ping Fang, Tian-Sheng Mei

Journal of Electrochemistry

β-Amino acids have a wide range of applications in the field of pharmaceuticals. Utilizing a combination strategy of nickel catalysis and paired electrolysis, a catalytic α-arylation protocol of carbonyl compounds has been developed. This protocol affords various a-aryl-a-cyanoacetates, which can be reduced to high-value-added α-aryl-β-amino acids. The cross-coupling reaction of electron-deficient aryl bromides with a-cyanoacetates achieves the expected products with good yields and functional group compatibility under mild conditions. Excessive electron-richness in initial aryl bromides facilitates the self-coupling of desired products. DFT calculations confirm that the presence of electron-rich aryl substitutions decreases the reduction potentials of the product anions, making …

An Overview Of How To Measure The Kinetic Properties Of An Anode Material For The Chlorine Evolution Reaction, Cameron Vann

Reviews, Analyses, and Instructional Studies in Electrochemistry (RAISE)

The process of generating chlorine gas using electrolysis in aqueous systems is well established. However, a new process requires chlorine to be generated at high temperatures using molten salt. This harsh environment requires a new study of anode materials for the chlorine evolution reaction. Anode materials can be compared by their kinetic parameters, the transfer coefficient α and the exchange current i0. The basic theory of these properties as they relate to the chlorine evolution reaction has been detailed and an analysis method for finding these effective parameters has been shown and demonstrated.

Thermogravimetric Analysis And Chemical Kinetics Of Waste Tires, Mahir Mohammed Said

Tanzania Journal of Engineering and Technology (TJET)

The focus of this paper is to analyse the pyrolysis reaction of waste tires. The pyrolysis was studied experimentally using thermal and chemical kinetics. The tires were pyrolyzed using thermogravimetry at a temperature range of 200 to 600°C, with heating rates of 10, 20, and 50°C/min. The activating energy was observed to increase with increased temperature. The highest activating energy was 101.02 kJ/mol at a heating rate of 50°C/min.

Enhanced Post Deposition Annealing Conditions On The Fabrication Of High Quality Thermochromic Vanadium Dioxide Films, Nuru R. Mlyuka

Tanzania Journal of Engineering and Technology (TJET)

Sputter deposition of thermochromic VO2 thin films for smart window applications has been faced with several challenges including the need for high deposition temperature, extremely precise and narrow range of oxygen/argon flow ratio and target poisoning during sputtering. Deposition of VO2 at room temperature without oxygen followed by post-deposition annealing has been cited as one of the potential mitigations to the challenge. In this study, the effects of post-deposition annealing conditions on the structural, electrical and optical properties of VO2 thin films are reported. The films were prepared on soda lime glass substrates using DC magnetron sputtering of metallic vanadium …

Design And Optimization Of An Azeotropic Distillation Pilot Plant For The Production Of Pure Ethanol, Samwel V. Manyele

Tanzania Journal of Engineering and Technology (TJET)

This study aimed to design an azeotropic distillation plant using Aspen Plus® V10 software and determine optimal process conditions for producing pure ethanol greater than 95% from pre-concentrated near-azeotropic ethanol-water solution. The non-random two-liquid Redlich-Kwong thermodynamic model was the base method for property analysis and performance prediction. Modelling and simulation of the converged process were conducted for fixed column variables (R = 5, N = 12 and p = 1 atm). Plant operating parameters were varied in the range of 0 to 1 for the pre-heater vapour fraction, 2 to 10 for the column feed plates (NFP), 2 to 6 …

Sol-Gel Synthesis And Microstructure Characterization Of Nio-Tio2 Semiconductor, Godlisten N. Shao

Tanzania Journal of Engineering and Technology (TJET)

NiO-TiO2 is a fascinating p-n semiconducting binary metal oxide with unique electronic and optical properties. The NiO-TiO2 has been synthesized using complicated preparation methods and expensive precursors that hamper their large-scale production. The present study reports the preparation of NiO-TiO2 semiconductor with improved physicochemical properties. NiO-TiO2 samples were prepared through one-pot sol-gel synthesis process followed by sintering of the as-synthesized materials at temperatures ranging from 600 to 1000 °C. The role of thermal treatment and NiO content on the microstructures was exquisitely studied. The microstructure of the NiO-TiO2 samples was examined by Raman spectroscopy, XRD, XRF, SEM-EDAX, high resolution TEM, …

Study Of The Effects Of Thermal Aging Coupled With Shot-Peening Treatment Of Carbonitrided Din 1.6587 Low Alloy Steel On Retained Austenite And Residual Stresses, Richard J. Katemi

Tanzania Journal of Engineering and Technology (TJET)

This work investigated the effects of thermal aging and shot-peening of carbonitrided 1.6587 steel grade on retained austenite and residual stresses. After carbonitriding samples contained maximum of 0.87% carbon, 0.34% nitrogen and 50 mass. -% retained austenite. Thermal aging conditions investigated were -30°C, 90°C and 150°C while the aging period were 14, 96 and 720 hours. After thermal aging, some of the samples were subjected to shot-peening treatment using standard cut wire shots StD – G3 - 0.6 mm VDFI 8001 with intensity in the range of 0.25 to 0.30 mmA and coverage of 1.00 to 1.24 x 98%. It …

Electrocatalytic Cyclopropanation Of Active Methylene Compounds, Liang-Hua Jie, Hai-Chao Xu

Journal of Electrochemistry

The development of novel strategies to access cyclopropanes has become increasingly important due to the vital role of these three-membered ring structures in synthetic intermediates, natural products, and pharmaceuticals. Herein, we present an electrocatalytic method for the synthesis of cyclopropanes through intermolecular dehydrogenative annulation of active methylene compounds and arylalkenes. This electrochemical process requires no chemical oxidants, allowing for a speedy access to various functionalized cyclopropanes from inexpensive and readily available materials.

Electrochemical Syntheses Of Aryl-Substituted Benzothiophenes And Phenanthrenes Using Benzenediazonium Salts As The Aryl Radical Precursors, Li-Yuan Lan, Yang-Ye Jiang, Raymond Daniel Little, Cheng-Chu Zeng

Journal of Electrochemistry

Aryl-substituted benzothiophene and phenanthrene are important structural units in medicinal chemistry and materials science. Although extensive effort has been devoted to prepare these compounds and a variety of approaches have been developed to construct the 2-substituted benzothiophene core structure, environmental-friendly and efficient synthetic means are still desired. Based on our previous electrochemical Minisci-type arylation reaction with aryl diazonium salt as the aryl precursor, as well as the work from König’s group, herein, we described the use of paired electrolysis to achieve 2-aryl benzothiophenes and 9-aryl phenanthrenes employing benzenediazonium salts as the aryl radical precursors. Initially, 2-methylthiobenzendiazonium salt 1a and 4-methylbenzene …

Electrochemical Advanced Treatment Of Desulfurization Wastewater From Coal-Fired Power Plants, Ju-Cai Wei, Juan Yi, Xu Wu

Journal of Electrochemistry

Zero-emission of desulfurization wastewater is one of the main demands for coal-fired power plants. As typical high salinity wastewater, it is hard to purify the desulfurization wastewater from coal-fired power plants through traditional physicochemical treatment or biochemical treatment, e.g., COD and Cl^–. A high concentration of Cl^– ion in desulfurization wastewater restricts wastewater reuse and zero-emission. Electrochemical technology is an attractive method for high salinity wastewater zero-emission, which provides a versatile, efficient, cost-effective, easily automatable, and clean industrial process. For advanced treatment of effluent after triple box process treatment in power plants, this paper reports an electrochemical …

Cfd Study On Two-Phase Flow Patterns In A Pipe With 90º Elbow In Different Operating Conditions, Hagar Alm-Eldin Bastawissi, Mohammed Ahmed Khafagy, E. A. El Shenawy Prof. Dr., Ahmed M. Salem Dr

Journal of Engineering Research

Recently, CFD has offered a technological solution for modelling multi-phase flow in which we can make endless simulations with reduced expenses and effort in high accuracy results; we shall also mention that experimental studies have limitations for safety considerations when experimenting with flow in high temperature or pressure values or medium nature as in nuclear or chemical flows.In this paper, we used the ANSYS FLUENT CFD program to simulate the two-phase flow in a pipe to study the effect of attaching a 90-degree elbow fitting to the piping system, seeking to find out the change in the pattern and resulting …

Recent Advances In Solar Photo(Electro)Catalytic Nitrogen Fixation, Jun-Bo Ma, Sheng Lin, Zhiqun Lin, Lan Sun, Chang-Jian Lin

Journal of Electrochemistry

Ammonia (NH₃) is an essential chemical in modern society. It is currently produced in industry by the Haber-Bosch process using H₂ and N₂ as reactants in the presence of iron-based catalysts at high-temperature (400–600 ^oC) and extremely highpressure (20–40 MPa) conditions. However, its efficiency is limited to 10% to 15%. At the same time, a large amount of energy is consumed, and CO₂ emission is inevitably. The development of a sustainable, clean, and environmentally friendly energy system represents a key strategy to address energy crisis and environmental pollution, ultimately aiming to achieve carbon neutrality. …

Monodispersed Cu-Tcpp/Cu2O Hybrid Microspheres: A Superior Cascade Electrocatalyst Toward Co2 Reduction To C2 Products, Zi-Xuan Wan, Aidar Kuchkaev, Dmitry Yakhvarov, Xiong-Wu Kang

Journal of Electrochemistry

The electrochemical conversion of carbon dioxide (CO₂) into valuable chemicals is a feasible way to mitigate the negative impacts of overmuch CO₂ emissions. Porphyrin-based metal organic frameworks (MOFs) are expected to be used for selective and efficient electrochemical CO₂ reduction (ECR) with porous structure and ordered active sites. Herein, we report the synthesis of a monodispersed and spherical organic/inorganic hybrid Cu-TCPP@Cu₂O electrocatalyst composed of Cu-TCPP (TCPP=tetrakis (4-carboxyphenyl) porphyrin) and Cu₂O, where TCPP plays significant roles in regulating the morphology. In-situ formed Cu during ECR process in combination with Cu-TCPP (Cu-TCPP@Cu) can suppress …

Rational Design Of Heterostructured Nanomaterials For Accelerating Electrocatalytic Hydrogen Evolution Reaction Kinetics In Alkaline Media, Hai-Bin Ma, Xiao-Yan Zhou, Jia-Yi Li, Hong-Fei Cheng, Ji-Wei Ma

Journal of Electrochemistry

Owing to the merits of high energy density, as well as clean and sustainable properties, hydrogen has been deemed to be a prominent alternative energy to traditional fossil fuels. Electrocatalytic hydrogen evolution reaction (HER) has been considered to be mostly promising for achieving green hydrogen production, and has been widely studied in acidic and alkaline solutions. In particular, HER in alkaline media has high potential to achieve large-scale hydrogen production because of the increased durability of electrode materials. However, for the currently most prominent catalyst Pt, its HER kinetics in an alkaline solution is generally 2–3 orders lower than that …

Lead-Free Perovskite/Metal Oxide Heterojunction Photocatalyst For Sustainable Toluene Oxidation, Zakarya Hazaea

Chulalongkorn University Theses and Dissertations (Chula ETD)

An important field of study is the ecologically benign synthesis of useful compounds such as benzaldehyde and benzyl alcohol from the organic contaminant toluene. Lead-free halide perovskites are excellent options for photocatalysis due to their exceptional photoelectric properties. Nonetheless, they have notable challenges, such as fast charge recombination and ineffective charge separation. In this work, we present a simple anti-solvent technique to create a heterojunction between lead-free halide perovskite Cs2AgBiBr6 (CABB) with Cu2O and Cu-Cu2O. This combination facilitates the photocatalytic activation of C(sp3)−H bonds, which in turn increases the oxidation of toluene. The Cu2O and Cu-Cu2O creating a Z-scheme heterojunction …

Investigation Of Space Charge Effects On Co2 Electrocatalytic Reduction On Gd-Doped Ceria Via Scanning Kelvin Probe And Model-Based Bayesian Analysis, Alejandro Mejia

Graduate Theses, Dissertations, and Problem Reports (ETD)

In studying novel energy conversion and storage systems, such as high-temperature electrolysis, numerous underlying fundamental physical processes remain unclear or inadequately understood. Among these, the modeling and comprehension of surface reaction mechanisms, coupled with the intricate effects of space‑charge interfaces, remains an unclear and challenging area of research.

The work of this dissertation involves the development of a 2D finite element analysis model, leveraging the robust MOOSE framework from INL. This model, featuring inhomogeneous defect thermodynamics for near-surface chemistry, formulated through Poisson‑Cahn variational theory, has been exploited for studying the electrocatalytic reduction of CO₂ on gadolinia doped ceria. The …