Open Access. Powered by Scholars. Published by Universities.®

Biochemical and Biomolecular Engineering Commons™

Open Access. Powered by Scholars. Published by Universities.®

Missouri University of Science and Technology

Discipline
Keyword
Publication Year
Publication
Publication Type
File Type

Articles 421 - 450 of 691

Full-Text Articles in Biochemical and Biomolecular Engineering

Phase Transformations Of Calcium Phosphates Formed In Wet Field Environments, O. M. Clarkin, Mark R. Towler, G. M. Insley, M. E. Murphy Oct 2007

Phase Transformations Of Calcium Phosphates Formed In Wet Field Environments, O. M. Clarkin, Mark R. Towler, G. M. Insley, M. E. Murphy

Chemical and Biochemical Engineering Faculty Research & Creative Works

The crystal phase and morphology of calcium phosphate salts precipitated in a wet field environment at temperatures between 30 and 70 °C and pHs between 3 and 8 were examined. Dicalcium Phosphate Dihydrate (DCPD) was the most prevalent phase precipitated. Using accelerated ageing study techniques, precipitates studied were aged, under dry conditions at 50 °C for 8 and 16 days, before being re-examined using XRD, FTIR and SEM techniques. DCPD was found to be most stable when precipitated at 40 °C and 5 pH. Considerably more phase transformation to Octacalcium Phosphate (OCP), Amorphous Calcium Phosphate (ACP) and Hydroxyapatite (HA) was …

Go to article

Prediction Of The Kolmogorov Entropy Derived From Computed Tomography Data In A Bubble Column Operated Under The Transition Regime And Ambient Pressure, Stoyan Nedeltchev, Ashfaq Shaikh, Muthanna H. Al-Dahhan Oct 2007

Prediction Of The Kolmogorov Entropy Derived From Computed Tomography Data In A Bubble Column Operated Under The Transition Regime And Ambient Pressure, Stoyan Nedeltchev, Ashfaq Shaikh, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Kolmogorov Entropy (KE) Algorithm Was Successfully Applied to Single Source Γ-Ray Computed Tomography (CT) Data Measured by Three Scintillation Detectors in a 0.162 M-ID Bubble Column Equipped with a Perforated Plate Distributor (163 Holes X ∅ 1.32. 10-3 M). the Aerated Liquid Height Was Set at 1.8 M. Dried Air Was Used as a Gas Phase, While Therminol LT (PL = 886 Kg M-3, ΜL = 0.88.10-3 Pa S, Σ = 17.10-3 N M-1) Was Used as a Liquid Phase. at Ambient Pressure, the Superficial Gas Velocity, ΜG, Was Increased …

Go to article

Mesophilic Digestion Kinetics Of Manure Slurry, Khursheed Karim, K. Thomas Klasson, Sadie R. Drescher, Whitney Ridenour, Abhijeet P. Borole, Muthanna H. Al-Dahhan Sep 2007

Mesophilic Digestion Kinetics Of Manure Slurry, Khursheed Karim, K. Thomas Klasson, Sadie R. Drescher, Whitney Ridenour, Abhijeet P. Borole, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Anaerobic Digestion Kinetics Study of Cow Manure Was Performed at 35°C in Bench-Scale Gas-Lift Digesters (3.78 L Working Volume) at Eight Different Volatile Solids (VS) Loading Rates in the Range of 1.11-5.87 G L-1 Day-1. the Digesters Produced Methane at the Rates of 0.44-1.18 L L-1 Day-1, and the Methane Content of the Biogas Was Found to Increase with Longer Hydraulic Retention Time (HRT). based on the Experimental Observations, the Ultimate Methane Yield and the Specific Methane Productivity Were Estimated to Be 0.42 L CH4 (G vs. Loaded)-1 and 0.45 L CH …

Go to article

Influence Of Two Changes In The Composition Of An Acrylic Bone Cement On Its Handling, Thermal, Physical, And Mechanical Properties, G. Lewis, J. Xu, S. Madigan, Mark R. Towler Aug 2007

Influence Of Two Changes In The Composition Of An Acrylic Bone Cement On Its Handling, Thermal, Physical, And Mechanical Properties, G. Lewis, J. Xu, S. Madigan, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study is a contribution to the growing body of work on the influence of changes in the composition of an acrylic bone cement on various properties of the curing and cured material. The focus is on one commercially-available acrylic bone cement brand, Surgical Simplex®P, and three variants of it and a series of properties, namely, setting time, maximum exotherm temperature, activation energy and frequency factor for the polymerization reaction, diffusion coefficient for the uptake of phosphate buffered saline, at 37°C, ultimate compressive strength (UCS), plane-strain fracture toughness, fatigue life (under fully-reversed tension-compression stress), hardness (H) and elastic modulus (both …

Go to article

A Chemical Engineering Laboratory Over Distributed Control And Measurement Systems, Jing Guo, David Kettler, Muthanna H. Al-Dahhan Aug 2007

A Chemical Engineering Laboratory Over Distributed Control And Measurement Systems, Jing Guo, David Kettler, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Remote Control of Lab Apparatus Via the Internet Allows Flexible Scheduling of Experiments and Exercises. This Paper Presents a Novel Application of Computers and Internet Technology in Chemical Engineering Education that Highlights Interactive Learning for an Undergraduate Course in Online Measurement and Control. the Proposed Client-Server Architecture Can Be Adapted to Drive Different Kinds of Devices and Can Be Easily Expanded. the Developed Online Laboratory Has Been Tested by Many Students using Different Connections and Operating Conditions. This Internet-Based Solution Can Improve Undergraduate Engineering Education in a Conventional Unit Operation Laboratory. as an Example, the Application of Remote Experiments to …

Go to article

Influence Of Acid Washing On The Surface Morphology Of Ionomer Glasses And Handling Properties Of Glass Ionomer Cements, C. M. Crowley, J. Doyle, Mark R. Towler, N. Rushe, S. Hampshire Aug 2007

Influence Of Acid Washing On The Surface Morphology Of Ionomer Glasses And Handling Properties Of Glass Ionomer Cements, C. M. Crowley, J. Doyle, Mark R. Towler, N. Rushe, S. Hampshire

Chemical and Biochemical Engineering Faculty Research & Creative Works

Acid washing is known to influence the handling properties of ionomer glasses used in glass ionomer cements due to the production of an ion depleted zone on the surface of the glass particles. The influence of acid washing on the particle size distribution and surface area of four glasses was examined by scanning electron microscopy (SEM), particle size analysis (PSA) and accelerated surface area porosimetry (ASAP) and the working and setting times of cements, produced from the glasses, correlated to changes in surface morphology. A linear relationship was found between the specific surface area of acid-washed SiO2-Al2 …

Go to article

Using A Fiber-Optic Probe For The Measurement Of Volumetric Expansion Of Liquids, Sean G. Mueller, Jay R. Werber, Muthanna H. Al-Dahhan, Milorad P. Dudukovic Jun 2007

Using A Fiber-Optic Probe For The Measurement Of Volumetric Expansion Of Liquids, Sean G. Mueller, Jay R. Werber, Muthanna H. Al-Dahhan, Milorad P. Dudukovic

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Fiber-Optic Probe is Developed for the Fast, In-Situ Measurement of Volumetric Expansion of Multiphase and Multicomponent Systems. an Experiment with the Binary Mixtures of CO2-Toluene and CO2-Ethanol Was Conducted to Demonstrate the Usefulness of the Fiber-Optic Probe in Accurately Tracking the Isothermal Volumetric Expansion as a Function of Pressure. in the 1-L Autoclave that Has Been Used, the Probe Was Shown to Detect the Liquid Level Height within a Precision of 0.35% of the Total Height of the Vessel. the Results for the Volumetric Expansion of Toluene and Ethanol with CO2 Correlate Well with …

Go to article

Measuring Gas-Liquid Distribution In A Pilot Scale Monolith Reactor Via An Industrial Tomography Scanner (Its), M. (Muthanna) H. Al-Dahhan, A. Kemoun, A. R. Cartolano, S. Roy, R. Dobson, J. Williams Jun 2007

Measuring Gas-Liquid Distribution In A Pilot Scale Monolith Reactor Via An Industrial Tomography Scanner (Its), M. (Muthanna) H. Al-Dahhan, A. Kemoun, A. R. Cartolano, S. Roy, R. Dobson, J. Williams

Chemical and Biochemical Engineering Faculty Research & Creative Works

An Industrial Tomography Scanner (ITS) Was Designed and Developed to Study and Quantify the Phase Distribution in a Two-Phase Flow Pilot Scale Monolith Reactor that Was 24 In. (0.60 M) in Diameter and 192 In. (4.9 M) in Height. the Monolith Reactor Was Operated Co-Current Up-Flow in the Taylor Flow Regime with Water as the Liquid Phase and Air as the Gas Phase. the Cross-Sectional Holdup Distributions Were Measured at Three Axial Elevations. the Operating Conditions Were Selected to Bracket Commercial Operating Conditions for Fixed Bed Monolithic Reactor Systems. the Results Show that its Can Capture the Flow Features in …

Go to article

Preliminary Work On The Development Of A Novel Detection Method For Osteoporosis, P. Moran, Mark R. Towler, S. Chowdhury, J. Saunders, M. J. German, N. S. Lawson, H. M. Pollock, I. Pillay, D. Lyons Jun 2007

Preliminary Work On The Development Of A Novel Detection Method For Osteoporosis, P. Moran, Mark R. Towler, S. Chowdhury, J. Saunders, M. J. German, N. S. Lawson, H. M. Pollock, I. Pillay, D. Lyons

Chemical and Biochemical Engineering Faculty Research & Creative Works

Osteoporosis affects both the organic and mineral phases of bone resulting in a decrease in resistance to fracture. Dual x-ray absorptiometry (DEXA) scans are used for diagnosing osteoporosis, which is conventionally characterized by a decrease in mineral density. Unfortunately, some patients who suffer osteoporotic fractures have normal bone density, because both the organic and the mineral phase are affected. However, there are currently no methods of evaluating the health of the organic phase. Patients undergoing treatment for osteoporosis have reported hardening of their fingernails. As the properties of nail and bone may be linked in a comparable, measurable way, this …

Go to article

Pt-Ru Nanoparticles Supported On Carbon Nanotubes As Methanol Fuel Cell Catalysts, Liang Li, Yangchuan Xing May 2007

Pt-Ru Nanoparticles Supported On Carbon Nanotubes As Methanol Fuel Cell Catalysts, Liang Li, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bimetallic Pt - Ru alloy catalysts have been demonstrated to be more active than pure Pt catalysts in the electrooxidation of methanol. We report here a study on Pt - Ru nanoparticle catalysts supported on sonochemically functionalized carbon nanotubes. the catalysts were prepared by directly reducing the corresponding salts, K2PtCl4 and K 2RuCl5, in an ethylene glycol aqueous solution containing dispersed carbon nanotubes. Three catalysts of different Pt to Ru atomic ratios, namely, Pt53Ru47, Pt69Ru31, and Pt77Ru23, were prepared for investigation of the compositional effects, It was shown that highly dispersed bimetallic Pt - Ru alloy nanoparticles with no agglomeration …

Go to article

Raman Spectroscopy Of The Human Nail: A Potential Tool For Evaluating Bone Health?, Mark R. Towler, A. Wren, N. Rushe, J. Saunders, N. M. Cummins, P. M. Jakeman May 2007

Raman Spectroscopy Of The Human Nail: A Potential Tool For Evaluating Bone Health?, Mark R. Towler, A. Wren, N. Rushe, J. Saunders, N. M. Cummins, P. M. Jakeman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Dual X-ray absorptiometry (DEXA) is the current gold standard for the diagnosis of osteoporosis. However, patients can suffer osteoporotic fractures despite normal bone mineral density, partly because of unmeasured influences of both the protein and mineral phases of bone that are affected in osteoporosis. There is currently no clinically applicable method of evaluating the health of the protein phase. The proteins in human nail (keratin) and bone (collagen) require sulphation and disulphide bond (S-S) formation for structural integrity and disorders of either sulphur metabolism or cystathione beta-synthase can lead to structural abnormalities in these tissues. Raman protein spectra provide a …

Go to article

Mechanical Characterization Of Spherical Hydrogels: Contact Diameter Measurement, Joshua Bunch Jan 2007

Mechanical Characterization Of Spherical Hydrogels: Contact Diameter Measurement, Joshua Bunch

Opportunities for Undergraduate Research Experience Program (OURE)

In an effort to develop new ophthalmic treatments revolving around the ocular lens, the mechanical characteristics of natural ocular lenses and synthetic models must be determined and compared. One mechanical characteristic that is necessary when making comparisons is the variation of contact circle diameter or contact area with varying strains. A method was used in this experiment to measure the varying contact circle diameter of spherical hydrogels at strains up to 15%. This method could be used to estimate the varying contact diameter of other similar materials such as natural ocular lenses if the precision of the method is improved. …

Go to article

Heat Transfer Coefficients In A High-Pressure Bubble Column, Chengtian Wu, Muthanna H. Al-Dahhan, Anand Prakash Jan 2007

Heat Transfer Coefficients In A High-Pressure Bubble Column, Chengtian Wu, Muthanna H. Al-Dahhan, Anand Prakash

Chemical and Biochemical Engineering Faculty Research & Creative Works

Time-Averaged Local Heat Transfer Coefficients Were Studied in a 0.16 M Inner Diameter High-Pressure Air-Water Bubble Column. the Effects of the Superficial Gas Velocity (Up to 0.30 M/s), Pressure (Up to 10 Bar), Probe Position, and Probe Orientation Were Investigated. the Heat Transfer Coefficients Increased with Superficial Gas Velocity, and the Values in the Center of the Column Were 9-16% Greater Than Those Near the Wall Region under Atmospheric Pressure (1 Bar). with the Increase in Pressure, the Heat Transfer Coefficients Decreased Due to Combined Effects of Bubble Size Decreasing, Gas Holdup Increasing, and Bubble Number Increasing. the Heat Transfer …

Go to article

Gas-Liquid Mass Transfer In A High Pressure Bubble Column Reactor With Different Sparger Designs, Lu Han, Muthanna H. Al-Dahhan Jan 2007

Gas-Liquid Mass Transfer In A High Pressure Bubble Column Reactor With Different Sparger Designs, Lu Han, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Gas-Liquid Mass Transfer in a 0.162 M High-Pressure Stainless-Steel Bubble Column Was Investigated using Three Different Gas Sparger Designs. an Oxygen-Enriched-Air Dynamic Method and an Optical Oxygen Probe Technique Were Implemented to Measure K1 a Values in the Bubble Column Reactor. using the Interfacial Area (A) Values Measured by a Four-Point Optical Probe Technique at Similar Conditions (Xue, 2004), the K1 Values Were Estimated. Axial Dispersion Model (ADM) and Continuous Stirred Tank Reactor (CSTR) Model Were Used to Calculate K1 a as a Fitted Parameter with the Measured Data. the ADM Gave Better Fits to the Experimental Data Than …

Go to article

Deposition Of Metallic Nanoparticles On Carbon Nanotubes Via A Fast Evaporation Process, Guoqiang Ren, Yangchuan Xing Nov 2006

Deposition Of Metallic Nanoparticles On Carbon Nanotubes Via A Fast Evaporation Process, Guoqiang Ren, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

A new technique was developed for the deposition of colloidal metal nanoparticles on carbon nanotubes. It involves fast evaporation of a suspension containing sonochemically functionalized carbon nanotubes and colloidal nanoparticles. It was demonstrated that metallic nanoparticles with different sizes and concentrations can be deposited on the carbon nanotubes with only a few agglomerates. the technique does not seem to be limited by what the nanoparticles are, and therefore would be applicable to the deposition of other nanoparticles on carbon nanotubes. PtPd and CoPt3 alloy nanoparticles were used to demonstrate the deposition process. It was found that the surfactants used to …

Go to article

Magnetic Nanoparticle Supported Catalyst For Atom Transfer Radical Polymerization, Shijie Ding, Yangchuan Xing, Maciej Radosz, Youqing Shen Sep 2006

Magnetic Nanoparticle Supported Catalyst For Atom Transfer Radical Polymerization, Shijie Ding, Yangchuan Xing, Maciej Radosz, Youqing Shen

Chemical and Biochemical Engineering Faculty Research & Creative Works

Magnetic nanoparticles were used to support an ATRP catalyst for the polymerization of methyl methacrylate (MMA) for minimized adverse effect of catalyst support and easy catalyst separation. the nanoparticle-supported catalyst mediated a living/controlled radical polymerization of MMA as effectively as unsupported catalysts. with the addition of 22 mol % of CuBr 2, the polymer molecular weights were well-controlled with an initiator efficiency of 0.85 and polydispersity lower than 1.2. the supported catalysts could be easily separated/isolated using an external magnetic field and reused with slightly decreased activity but further improved control. the activity of the recycled catalyst was regenerated by …

Go to article

Electrochemical Durability Of Carbon Nanotubes In Noncatalyzed And Catalyzed Oxidations, Liang Li, Yangchuan Xing Sep 2006

Electrochemical Durability Of Carbon Nanotubes In Noncatalyzed And Catalyzed Oxidations, Liang Li, Yangchuan Xing

Chemical and Biochemical Engineering Faculty Research & Creative Works

Noncatalyzed and catalyzed electrochemical oxidations of multiwalled carbon nanotubes (CNTs) were studied with the aim to understand their durability as catalyst support in polymer electrolyte membrane (PEM) fuel cells. Bare and Pt-deposited CNTs were investigated in 1.0 M sulfuric acid at a constant potential of 1.2 V. Carbon black (CB, Vulcan XC-72R) was also studied under the same experimental conditions. the carbons were oxidized at room temperature in the form of thin-film electrodes with time durations up to 48 h. Cyclic voltammetry was used to monitor the surface oxide redox reactions as a way to quantify the degree of surface …

Go to article

Influence Of Two Changes In The Composition Of An Acrylic Bone Cement On Some Of Its Properties: The Case Of Surgical Simplex® P, S. Madigan, Mark R. Towler, G. Lewis Sep 2006

Influence Of Two Changes In The Composition Of An Acrylic Bone Cement On Some Of Its Properties: The Case Of Surgical Simplex® P, S. Madigan, Mark R. Towler, G. Lewis

Chemical and Biochemical Engineering Faculty Research & Creative Works

Influence of two changes in the composition of a self-curing acrylic bone cement on some of its properties are discussed. Acrylic bone cements are widely used in orthopedic surgery for the fixation of joint prosthesis and in vertebroplasty and kyphoplasty for the stabilization and augmentation of fractured vertebrae. The cement's curing process is the result of a free-radical polymerization of a mixture of poly (methyl 1 methacrylate) [PMMA] containing powder and a liquid monomer that has methyl methacrylate (MMA) in it. It is initiated by the decomposition of benzoyl peroxide (BPO) in the powder, activated by a tertiary amine in …

Go to article

The Influence Of Ultrasonic Setting On Fluoride Release From Glass Polyalkenoate Cements, N. Rushe, Mark R. Towler Sep 2006

The Influence Of Ultrasonic Setting On Fluoride Release From Glass Polyalkenoate Cements, N. Rushe, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

The effects of ultrasonic setting on fluoride release from glass polyalkenoate cements (GPC) were investigated. Cements based on two different aluminosilicate glasses that contained silica, alumina, phosphate, and strontia were used for the experiment. A series of GPCs were examined to show that increased release F- ion occurs, regardless of GPC composition. The results show that there is a greater release of fluoride from the ultrasonically set samples than those set chemically, regardless of the chemical composition. The snap set caused by the ultrasound is likely to be due to a combination of cavitation, improved mixing of the constituents, …

Go to article

Calcium And Zinc Ion Release From Polyalkenoate Cements Formed From Zinc Oxide/Apatite Mixtures, Mark R. Towler, S. Kenny, D. Boyd, T. Pembroke, M. Buggy, A. Guida, R. G. Hill Sep 2006

Calcium And Zinc Ion Release From Polyalkenoate Cements Formed From Zinc Oxide/Apatite Mixtures, Mark R. Towler, S. Kenny, D. Boyd, T. Pembroke, M. Buggy, A. Guida, R. G. Hill

Chemical and Biochemical Engineering Faculty Research & Creative Works

Calcium and zinc ion release from hydroxyapatite-zinc oxide-poly (acrylic acid) (HAZnO-PAA) composite cements into deionised water was investigated as a function of HA content, PAA concentration, PAA molecular weight and maturation time. At any given maturation time, zinc ion release was constant until the HA content was at the maximum loading (60 wt%) resulting in the cement matrix breaking up, allowing exacerbated ion release. The calcium ion release increased with increased HA content in the composite until the maximum loading where the release drops off. Up to this point, the release of both ionic species was proportional to square root …

Go to article

Flow Regime Identification In A Bubble Column Based On Both Statistical And Chaotic Parameters Applied To Computed Tomography Data, Stoyan Nedeltchev, Ashfaq Shaikh, Muthanna H. Al-Dahhan Sep 2006

Flow Regime Identification In A Bubble Column Based On Both Statistical And Chaotic Parameters Applied To Computed Tomography Data, Stoyan Nedeltchev, Ashfaq Shaikh, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Kolmogorov Entropy (KE) Algorithm Was Applied Successfully to Single Source Γ-Ray Computed Tomography (CT) Data Measured in a 0.162 M ID Bubble Column Equipped with a Perforated Plate Distributor (163 Holes · Ø 1.32 Mm). Dried Air Was Used as the Gas Phase and Therminol LT (ΡL = 886 Kg M-3, ΜL = 0.88 · 10-3 Pa S, Σ = 17 · 10-3 N M-1) Was Used as a Liquid Phase. Three Different Pressures, P, of 0.1, 0.4, and 1.0 MPa Were Examined. at Each Pressure the Superficial Gas Velocity, UG, Was Increased Stepwise by Steps of 0.01 Ms-1 …

Go to article

Electrowetting Droplet Microfluidics On A Single Planar Surface, Christopher G. Cooney, Chao Yi Chen, Michael R. Emerling, Ali Nadim, James D. Sterling Sep 2006

Electrowetting Droplet Microfluidics On A Single Planar Surface, Christopher G. Cooney, Chao Yi Chen, Michael R. Emerling, Ali Nadim, James D. Sterling

Business and Information Technology Faculty Research & Creative Works

Electrowetting refers to an electrostatically induced reduction in the contact angle of an electrically conductive liquid droplet on a surface. Most designs ground the droplet by either sandwiching the droplet with a grounding plate on top or by inserting a wire into the droplet. Washizu and others have developed systems capable of generating droplet motion without a top plate while allowing the droplet potential to float. In contrast to these designs, we demonstrate an electrowetting system in which the droplet can be electrically grounded from below using thin conductive lines on top of the dielectric layer. This alternative method of …

Go to article

The Antibacterial Effects Of Zinc Ion Migration From Zinc-Based Glass Polyalkenoate Cements, D. Boyd, H. Li, D. A. Tanner, Mark R. Towler, J. G. Wall Jun 2006

The Antibacterial Effects Of Zinc Ion Migration From Zinc-Based Glass Polyalkenoate Cements, D. Boyd, H. Li, D. A. Tanner, Mark R. Towler, J. G. Wall

Chemical and Biochemical Engineering Faculty Research & Creative Works

Zinc-based glass polyalkenoate cements have been synthesised and their potential use in orthopaedic applications investigated. Zinc ions were released from the materials in a rapid burst over the first 24 h after synthesis, with the release rate falling below detectable levels after 7 days. Cement-implanted bone samples were prepared, and the released zinc was shown, using energy dispersive X-ray analysis, to penetrate from the cement into the adjacent bone by up to 40 μm. Finally, the cements exhibited antibacterial activity against Streptococcus mutans and Actinomyces viscosus that reflected the pattern of zinc release, with the inhibition of growth greatest shortly …

Go to article

Methane Production In A 100-L Upflow Bioreactor By Anaerobic Digestion Of Farm Waste, Abhijeet P. Borole, K. Thomas Klasson, Whitney Ridenour, Justin Holland, Khursheed Karim, Muthanna H. Al-Dahhan Jun 2006

Methane Production In A 100-L Upflow Bioreactor By Anaerobic Digestion Of Farm Waste, Abhijeet P. Borole, K. Thomas Klasson, Whitney Ridenour, Justin Holland, Khursheed Karim, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Manure Waste from Dairy Farms Has Been Used for Methane Production for Decades, However, Problems Such as Digester Failure Are Routine. the Problem Has Been Investigated in Small Scale (1-2 L) Digesters in the Laboratory; However, Very Little Scale-Up to Intermediate Scales Are Available. We Report Production of Methane in a 100-L Digester and the Results of an Investigation into the Effect of Partial Mixing Induced by Gas Upflow/recirculation in the Digester. the Digester Was Operated for a Period of About 70 D (With 16-D Hydraulic Retention Time) with and Without the Mixing Induced by Gas Recirculation through an Internal …

Go to article

Thermal Analysis Of Adsorbed Poly(Methyl Methacrylate) On Silica, Frank D. Blum, Erin N. Young, Gregory Smith, Oliver C. Sitton May 2006

Thermal Analysis Of Adsorbed Poly(Methyl Methacrylate) On Silica, Frank D. Blum, Erin N. Young, Gregory Smith, Oliver C. Sitton

Chemistry Faculty Research & Creative Works

Modulated differential scanning calorimetry has been used to quantify the glass transitions of small, adsorbed amounts of poly (methyl methacrylate) (PMMA) on silica. While a relatively narrow, single glass transition was found for bulk PMMA, broader two-component transitions were found for the adsorbed polymer. a two-state model based on loosely bound polymer (glass transition similar to bulk) and more tightly bound polymer (glass transition centered around 156°C) was used to interpret the thermograms. on the basis of this model, the amount of tightly bound polymer was found to be approximately 1.3 mg/m 2, corresponding to a 1.1 nm thick layer. …

Go to article

An Investigation Into The Structure And Reactivity Of Calcium-Zinc-Silicate Ionomer Glasses Using Mas-Nmr Spectroscopy, D. Boyd, Mark R. Towler, R. V. Law, R. G. Hill May 2006

An Investigation Into The Structure And Reactivity Of Calcium-Zinc-Silicate Ionomer Glasses Using Mas-Nmr Spectroscopy, D. Boyd, Mark R. Towler, R. V. Law, R. G. Hill

Chemical and Biochemical Engineering Faculty Research & Creative Works

The suitability of Glass Polyalkenoate Cements (GPCs) for orthopaedic applications is retarded by the presence in the glass phase of aluminum, a neurotoxin. Unfortunately, the aluminum ion plays an integral role in the setting process of GPCs and its absence is likely to hinder cement formation. However, the authors have previously shown that aluminum-free GPCs may be formulated based on calcium zinc silicate glasses and these novel materials exhibit significant potential as hard tissue biomaterials. However, there is no data available on the structure of these glasses. 29Si MAS-NMR, differential thermal analysis (DTA), X-ray diffraction (XRD), and network crosslink density …

Go to article

Gas Holdup In Trayed Bubble Column Reactors, Javier Alvaré, Muthanna H. Al-Dahhan Apr 2006

Gas Holdup In Trayed Bubble Column Reactors, Javier Alvaré, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Sectionalization of Conventional Bubble Columns by Perforated Trays into Trayed Bubble Columns (TBCs) Has Much Potential in Biochemical and Petroleum Refining Processes, as an Effective Way to Improve the Gas-Liquid Contacting Efficiency and Reduce the Liquid Back mixing. in This Work, the Effects of Tray Geometry, Superficial Gas Velocity, and Superficial Liquid Velocity on the overall Gas Holdup Have Been Investigated. It Was Determined that the Trays Significantly Increase the overall Gas Holdup. the Tray Hole Diameter and Superficial Gas Velocity Were Determined to Be the Most Important Factors. © 2006 American Chemical Society.

Go to article

Ultrasonically Set Glass Polyalkenoate Cements For Orthodontic Applications, D. A. Tanner, N. Rushe, Mark R. Towler Apr 2006

Ultrasonically Set Glass Polyalkenoate Cements For Orthodontic Applications, D. A. Tanner, N. Rushe, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

There is an accepted clinical requirement for a luting cement that can be command set upon satisfactory placement of an orthodontic appliance onto dentition. This work evaluates the suitability of ultrasound, imparted from a dental scaler, as a potential mechanism for achieving this. The net setting times and subsequent compressive strengths of a range of commercial and experimental glass polyalkenoate cements (GPCs) were evaluated, using modified ISO 9917 methods, when set both chemically and by ultrasound. The ultrasound was applied to the GPC through an orthodontic brace. It was possible to command set GPCs by the application of five to …

Go to article

Optimisation Of The Composition Of An Acrylic Bone Cement: Application To Relative Amounts Of The Initiator And The Activator/Co-Initiator In Surgical Simplex®P, S. Madigan, M. R. Towler, G. Lewis Apr 2006

Optimisation Of The Composition Of An Acrylic Bone Cement: Application To Relative Amounts Of The Initiator And The Activator/Co-Initiator In Surgical Simplex®P, S. Madigan, M. R. Towler, G. Lewis

Chemical and Biochemical Engineering Faculty Research & Creative Works

In cemented arthroplasties, the two-part self-curing acrylic bone cement is currently the only material used for anchoring the total joint replacement to the contiguous bone. In virtually all commercially available formulations of this cement, the agents used for the initiation and activation/co-initiation of the radical polymerisation reaction are benzoyl peroxide (BPO) and N, N dimethyl-paratoluidine (DMPT), respectively. There are no reports in the open literature on the rationale for the amounts of these and other constituents in the formulations of the cement. Given the concerns that have been raised in the literature regarding the effect of residual DMPT on the …

Go to article

Liquid Phase Mixing In Trayed Bubble Column Reactors, Javier Alvaré, Muthanna H. Al-Dahhan Mar 2006

Liquid Phase Mixing In Trayed Bubble Column Reactors, Javier Alvaré, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The Compartmentalization of Conventional Bubble Columns by Perforated Trays Constitutes a Very Effective Method to Reduce the Liquid Back mixing. the Effect of Tray Design and Operating Conditions on the overall Liquid Mixing Was Studied in a Bench-Scale Trayed Bubble Column. the Extent of Liquid Back mixing in the Column Was Investigated in Light of Liquid-Phase Tracer Response Experiments. in Average, a Three-Fold Reduction in the Liquid Back mixing Was Achieved in the Trayed Column as Compared to the Column Without the Trays. Moreover, the Tray Open Area and the Superficial Liquid Velocity Were Found to Have the Strongest Effects …

Go to article

First Prev Next Last