Chemical Engineering Commons^™

Electroanalytical Measurements Of Oxide Ions In Molten Cacl2 On W Electrode, Devin Rappleye, Chao Zhang, Art Nelson, Scott Simpson, Michael Simpson

Faculty Publications

The electrochemical interaction of oxide ions with tungsten electrodes in molten calcium chloride (CaCl₂) was analyzed by combining electroanalytical techniques with X-ray photoelectron spectroscopy. During a cyclic voltammetry (CV) scan, the oxide ions appear to interact with the tungsten working electrode via a multi-step oxidation and reduction process. The overall redox peaks behave reversibly up to 750 mV/s. This electrochemical process enables the oxide ion concentration to be correlated to CV oxidation peaks. The resulting correlation agrees well (8.8% difference) with back titration measurements and can be used to monitor oxide content in the salt in real-time during …

The Study Of Copper Corrosion Mechanisms Using Electrochemical Experimental Techniques., Evan Grimm

Electronic Theses and Dissertations

The purpose of this study was to discover and thoroughly explain the corrosion mechanisms of copper in saltwater, tap water and deionized water, and to apply these methods and findings when testing the corrosion mechanisms of other materials. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, and Tafel analysis.

The copper was found to corrode at a greater rate in saltwater, followed by tap water then deionized water, with a larger difference between saltwater and tap water than between tap water and deionized water. Each reaction was found to be both kinetically …

Modified Electrode Surfaces With Hydrogen Evolution Reaction Catalysts Derived From Electropolymerized Complexes With Redox Active Ligands., Amanda Mae Arts

Electronic Theses and Dissertations

The demand for energy is growing exponentially, and to keep up with these demands new technologies for renewable energy have received increased attention. Hydrogen is one of the most promising energy sources for the future and plays a vital role in water electrolysis and fuel cells, as the hydrogen evolution reaction (HER) is the main step in the water splitting process. To increase the reaction rate and improve efficiency for the water electrolysis, catalysts are used to minimize the overpotential.

Most of the current electrocatalysts for HER are heterogeneous in nature and are dominated by platinum and other precious metals …

Investigation Of Iron-Nickel Based Nanoparticles As Catalysts For Oxygen Evolution Reaction (Oer), Prashant Acharya

Graduate Theses and Dissertations

Hydrogen fuel is increasingly seen as an appealing alternative by both the scientific and the industrial communities in the drive towards a clean energy future. Hydrogen, unlike fossil-based fuels, does not release carbon dioxide, a chief component of greenhouse gases, upon combustion. However, more than 95% of the hydrogen in the world is still produced by burning fossil fuels as this method is currently the only economically feasible option at a large industrial scale.

Water electrolysis shows a lot of potential in both hydrogen generation and in the storage of energy from renewable sources such as wind and sunlight. Likewise, …

Mitigating Corrosion And Enhancing Energy Density Of Zinc-Based Anodes In Primary And Secondary Aqueous Batteries, Ehsan Faegh

Theses and Dissertations

Today Lithium-ion (Li-ion) batteries are the most-emphasized battery technology among the many different battery systems in the market. However, due to their high cost (especially for electric vehicle applications), flammability and toxicity, the development of inexpensive and safer alternative battery chemistries has been the focus of a significant amount of recent research. Among various battery chemistries, Aluminum-based (Al-based) and Zinc-based (Zn-based) batteries have been touted as promising options to compete with Li-ion batteries. However, the practical realization of Al battery chemistries has been difficult over a long period of time (170 years) due to a number of fundamental and intrinsic …

Alternative View Of Oxygen Reduction On Porous Carbon Electrocatalysts: The Substance Of Complex Oxygen-Surface Interactions, Giacomo De Falco, Marc Florent, Jacek Jagiello, Yongqiang Cheng, Luke L. Daemen, Anibal J. Ramirez-Cuesta, Teresa J. Bandosz

Publications and Research

Electrochemical oxygen reduction reaction (ORR) is an important energy-related process requiring alternative catalysts to expensive platinum-based ones. Although recently some advancements in carbon catalysts have been reported, there is still a lack of understanding which surface features might enhance their efficiency for ORR. Through a detailed study of oxygen adsorption on carbon molecular sieves and using inelastic neutron scattering, we demonstrated here that the extent of oxygen adsorption/interactions with surface is an important parameter affecting ORR. It was found that both the strength of O2 physical adsorption in small pores and its specific interactions with surface ether functionalities in the …

Carbon Capture And Utilization, Sriram Valluri

Dissertations, Master's Theses and Master's Reports

As the world moves towards clean energy initiative, carbon capture and utilization technologies are key to achieving net zero emissions. CO2 capture with amines has many disadvantages and cannot be applied to commercial power plants. The current manuscript will address this issue as well as a solution that involves the use of low-cost alkali absorbent CO₂ capture solutions, combined with an electrochemical regeneration method that uses the least amount of energy available for capture and regeneration. This research will also further address the issue of how to deal with the captured CO2. Several viable storage and utilization methods have …

Biomass-Derived Electrode Materials And Sustainable Processes For Supercapacitors, Katelyn M. Shell

Theses and Dissertations

Biomass is one of the most abundant natural resources and has been used as a source of energy for thousands of years. Biomass as a precursor for energy storage materials is still relatively novel and faces several obstacles before becoming commonly used in today’s electrical devices. Currently, energy storage devices, such as batteries, capacitors, and supercapacitors, utilize petroleum-derived graphitic carbons for anodes, generating a need for more sustainable materials. Biomass, as a carbon-rich source for electrode materials, presents a viable and economically feasible alternative due to the prevalent lignocellulosic compounds: lignin, cellulose, and hemicellulose. Preliminary studies on the solid residues …

Cold Plasma Enhanced Active Sites On Supported Nip Nanoparticles For The Oxygen Evolution Reaction, Michael Ricci

Williams Honors College, Honors Research Projects

Identifying materials to efficiently facilitate the oxygen evolution reaction (OER) is key to advancing water electrolysis, an essential technology in the pathway towards a sustainable energy future. Here, we explore cold-plasma treatment as a facile method to enhance the activity of NiP nanoparticles supported on activated carbon. NiP nanoparticles were synthesized on an activated carbon support using a solid-state method and were then treated with argon, oxygen, and hydrogen plasmas for extended times. In all cases, plasma treatment reduced the number of active sites on the support. OER activity was evaluated by testing the materials in alkaline conditions. The activities …

Brominated Carbon Materials As Positive Electrodes For Nonaqueous Secondary Lithium-Bromine Batteries, Benjamin Beau Peterson

LSU Doctoral Dissertations

Secondary lithium-bromine (Li-Br₂) batteries have theoretical potentials near 4.1 V vs Li/Li⁺ and capacities more than 2 times greater than conventional Li-ion batteries. Herein, secondary, non-aqueous Li-Br₂ half-cell batteries are reported using a Li metal anode, carbon-coated glass fiber separator, non-aqueous Li-based electrolytes with and without the addition of lithium bromine (LiBr) salt, and positive electrodes consisting of either chemically brominated non-graphitic carbon or carbon derived from the carbonization of metal-organic frameworks (MOFs) with LiBr embedded into the micro- and mesopores of the carbon matrix. The separator is effective in mitigating the transport of Br_{2 …}

Engineering Ionomer Materials For Addressing Ohmic Resistances In Electrochemical Desalination And Waste Heat Recovery, Varada Menon Palakkal

LSU Doctoral Dissertations

Water scarcity and energy availability present important challenges that need to be addressed in the coming centuries. In the front of water technologies, desalting brackish water is of extreme importance for thermal electric power plants, chemical manufacturing plants, and other industrial operations that treat and reuse their water utilities. Membrane capacitive deionization (MCDI) is an energy efficient desalination technique that has drawn attention from commercial entities. Most material research studies on MCDI focus on enhancing electrode performance while little emphasis is given to rationale design of ion-exchange membranes (IEMs). In this work, the ionic conductivity, permselectivity, and thickness for three …

Theoretical Investigation Of Fundamental Cathode Processes In Metal-02 Batteries, Saurin Hiren Rawal

LSU Doctoral Dissertations

In this thesis we theoretically explore the different fundamental phenomena associated with metal-air batteries (where the metal can be Li, Na or K) using first principles density functional theory. We start by investigating the adsorption of the starting reactants/primary intermediates i.e. metal superoxides and superoxide anion on Au(111) and Au(211). We elucidate the influence of electric fields and the importance of including explicit solvents on the adsorption energy of these intermediates. We show that these effects are considerable and should be included for future reaction modeling of these batteries. Following this we investigate the reaction of M⁺ and O …

Hysteresis Effects And Roughness Suppression Efficacy Of Polyethylenimine Additive In Cu Electrodeposition In Ethaline, Nora A. Shaheen, Ijjada Mahesh, Rohan Akolkar

Faculty Scholarship

Deep eutectic solvents (DES) are environmentally-friendly electrolytes that are gaining interest for electrodeposition and energy storage applications. In these applications, metal electrodeposits with smooth, nondendritic morphology are desired and thus effective strategies for suppressing roughness evolution are critically needed. A commonly employed and rather effective strategy for suppressing roughness evolution in metal electrodeposition is the use of electrolyte additives; however, the availability of such additives in DES electrolytes is limited and so is the understanding of the mechanisms through which additives suppress roughness amplification in DES media. In the present contribution, we demonstrate that polyethylenimine (PEI) is an effective electrolyte …

Electrochemical Characterization Of Bromine Reduction To Tribromide In Individual Nitrobenzene-In-Water Emulsion Droplets, Liang Chang, Allen J. Bard

Faculty Scholarship

We report an electrochemical study of bromine reduction to tribromide in a single nitrobenzene (NB) droplet during a single collision event. The feasibility of this study is based on the favorable distribution of Br2 in NB rather than in water, which was demonstrated by voltammetry at the NB/water interface. The NB-in-water emulsions containing the ionic liquids trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)amide (ILPA) as the supporting electrolyte and sodium dodecyl sulfate (SDS) as the surfactant were prepared by a high-power ultrasonication. Its single droplet as an attoliter reactor, colliding on a 25 μm Pt UME, was monitored by chronoamperometry. The spike-type current transients of …

Application Of Immobilized Palladium Monolithic Catalysts In Suzuki-Miyaura And Tsuji-Wacker Redox Reactions, Sajjad Ghobadi

Theses and Dissertations

Herein, a wholistic analysis of the viability of monolithic catalysts for redox reactions is presented. The interdisciplinary approach taken in this systematic study included preparation and investigation on Pd-on-carbon monoliths as catalysts in a flow and electrochemical settings.

The Suzuki-Miyaura reaction-focused study led to rational design, preparation, and successful application of Pd⁰-on-graphene oxide (GO) monolithic catalysts in flow conditions. In this study a combination of chemical reduction, freeze-casting, and vapor-phase reduction processes was applied to Pd-GO structures leading to the preparation of these monoliths. The Suzuki flow synthesis reactions revealed that the monolithic structure led to significantly improved …

Anion Exchange And Bipolar Membranes For Electrochemical Energy Conversion And Storage, Zhongyang Wang

McKelvey School of Engineering Graduate Student Theses & Dissertations

Anion exchange and bipolar membrane fuel cells generate electrical energy directly from chemical fuels and have attracted considerable interests as alternate power sources for large market applications, such as transportation (hydrogen fuel cells) and unmanned vehicles (sodium borohydride fuel cells). Anion exchange membrane (AEM), generally composed of a polymer with covalently tethered ionic groups, is the central component of the fuel cell serving as the electrolyte, conducting hydroxide ions from cathode to anode, where fast ionic conduction is directly related to power output. However, AEMs currently used in fuel cells (H2 fuel cells and sodium borohydride fuel cells) exhibit ion …

Understanding The Role Of Complexation In The Charge-Transfer Kinetics Of The Cu2+ + E ↔ Cu1+ Redox Reaction In Ethaline Deep Eutectic Solvent, Dai Shen, Rohan Akolkar

Faculty Scholarship

Deep eutectic solvent (DES) based electrolytes are gaining attention for electrochemical applications. As such, knowledge of the charge transfer kinetics in DES and its dependence on electrolyte composition and temperature is important. Using Cu2+ + e ↔ Cu1+ as a model system, we demonstrate that metal redox reactions in chloride-containing DES media suffer from sluggish charge transfer kinetics. The exchange current density, i0, displayed a peculiar inverse relationship with the bulk chloride concentration, [Cl−]b. The i0 decreased from 7.9 to 3.0 mA/cm2 when [Cl−]b increased from 2.8 to 4.6 M at 30°C. Such dependence is shown to originate from Cl− …

Surface Immobilization Of Terpyridine Compounds, Elizabeth Hallett

Chemical Engineering Undergraduate Honors Theses

The deoxydehydration (DODH) of polyols to alkenes is a promising method of producing high-value chemical feedstocks from biomass-derived materials. Current catalytic systems for DODH require the use of costly reducing agents that generate stoichiometric amounts of chemical waste. Immobilizing catalysts on electrode surfaces using chemical linking groups eliminates the need for sacrificial reductants. In this work, glassy carbon electrodes were modified with 4’-(3,4-dihydroxyphenyl)-2,2’:6’,2’’-terpyridine to investigate o-benzoquinone as a potential linking group for DODH, and possibly for other reactions. Previous studies involving electrodes modified with quinone-containing compounds have primarily been focused on catalyzing the oxidation of NADH; the nature or …

An Experimental And Numerical Investigation Of Flow Accelerated Flibe Corrosion, David B. Weitzel

Nuclear Engineering ETDs

Renewed interest in molten salt reactor technology has brought to light the need for a better understanding of FLiBe corrosion. To this end a flowing FLiBe corrosion test loop was designed to test the flow effects of FLiBe corrosion. The loop consists of a pump, melt tank, and stainless-steel tubing assembly that heats the molten salt to high temperatures and circulates it over test specimens. The experiment has been constructed and has completed initial shakedown testing.

To support the flowing FLiBe experiment, a numerical corrosion model that couples FLiBe electrochemistry, solid metal diffusion, and mass transport was implemented. The model …

Engineering Of Earth-Abundant Electrochemical Catalysts, Dylan D. Rodene

Theses and Dissertations

Alternative energy research into hydrogen production via water electrolysis addresses environmental and sustainability concerns associated with fossil fuel use. Renewable-powered electrolyzers are foreseen to produce hydrogen if energy and cost requirements are achieved. Electrocatalysts reduce the energy requirements of operating electrolyzers by lowering the reaction kinetics at the electrodes. Platinum group metals (PGMs) tend to be utilized as electrocatalysts but are not readily available and are expensive. Ni_1-xMo_x alloys, as low-cost and earth-abundant transition metal nanoparticles (NPs), are emerging as promising electrocatalyst candidates to replace expensive PGM catalysts in alkaline media. Pure-phase cubic and hexagonal Ni_{1-x …}

Chronoamperometry Analysis Of Sweat Sensor Technology, Evan Fritz

Williams Honors College, Honors Research Projects

Due to the demand for in-situ electrolyte sodium sensors, prototype sensors have been produced to create a product for athletes and marathoners to monitor hydration levels. These senors address a desire in the marketplace for athletic monitoring for overall athlete wellness and performance. Sweat sensor samples were created using Multi-walled Carbon Nanotubes functionalized on a Nylon-6 fiber mat using cyclo-oligomeric Calixarene. This production process produces sensors capable of detecting sodium ion concentration present in human sweat in presence of an electric current. Chronoamperometry analysis is used in this manner to determine the functionality of the sensors. Much of the research …

Avoiding Pitfalls In The Determination Of Reliable Electrochemical Kinetics Parameters For The Cu2+ → Cu1+ Reduction Reaction In Deep Eutectic Solvents, Dai Shen, Katherine Steinberg, Rohan Akolkar

Faculty Scholarship

Deep eutectic solvents (DES), on account of their low-cost, non-flammability and electrochemical stability, are attracting attention for their potential use in applications such as electrodeposition and energy storage. In these applications, knowledge of the transport and electrochemical kinetics properties of DES is critically important. To date, attempts to measure the kinetics parameters of the Cu2+ +e Cu1+ reaction in ethaline DES have yielded a cathodic charge transfer coefficient (α) in the range of 0.2–0.3 suggesting an unexpected asymmetric polarization behavior. In the present work, we pursued a comprehensive study of the kinetics and transport properties of the aforementioned reaction. Using …

Spectro-Electrochemical Platforms For Dynamic Analyses Of Catalytic Cascade Systems, Nalin I. Andersen

Nanoscience and Microsystems ETDs

The development of spectro-electrochemical platforms that facilitate the dynamic analyses of complex catalytic cascade systems was explored in this research. These systems facilitated multiple modalities of catalysts and were used as platforms for monitoring catalytic transformations quasi-in situ. The analytical platforms allowed for the characterization of intermediates and products using surface-enhanced Raman spectroscopy (SERS). The design and fabrication of these devices proved to be reproducible, made of materials that can be manipulated for multiple applications, and incorporate fluid mechanics, electrochemistry, and multimodal catalysis. Microfluidic technology offers capabilities for understanding catalytic cascade systems by providing precise dynamic control of …

Vanadium Redox Flow Batteries: Design And Experimentation, Matthew George

Williams Honors College, Honors Research Projects

Vanadium flow batteries (VFB) are a type of battery that has potential as a grid-scale energy storage solution. An original design for a lab-scale VFB is presented herein, along with a procedure for electrolyte preparation from V₂O₅ using oxalic acid. The flow cell is constructed from Delrin, Teflon, Kynar, Santoprene, Nafion, graphite plate, and porous carbon. Two diaphragm pumps along with polyethylene, PVC, and Santoprene tubing are used. The active area is 58 cm². The battery was charged using a DC power supply at a constant current of 4 A with corresponding initial voltage of …

Graphite And Graphene-Oxide Based Pgm-Free Model Catalysts For The Oxygen Reduction Reaction, Joseph Henry Dumont

Nanoscience and Microsystems ETDs

The world currently relies heavily on fossil fuels such as coal, oil, and natural gas for its energy. Fossil fuels are non-renewable, that is, they draw on finite resources that will eventually dwindle, becoming too expensive or too environmentally damaging to retrieve. One alternative source of energy are fuel cells, electrochemical devices that convert chemical energy to cleanly and efficiently produce electricity. They can be used in a wide range of applications, including transportation, stationary, portable and emergency power sources. Their development has been slowed by the high cost of PGM electrocatalysts needed at both electrodes as well as sluggish …

Biomimetic Devices To Drive A Thermodynamically Uphill Reaction Using Light And To Degrade Industrial Waste Stream Components, Madison Joanne Sloan

Theses and Dissertations--Chemistry

Given the amount of industrial waste produced each year, as well as the accruing amount of greenhouse gases in our atmosphere produced by the burning of fossil fuels, it is imperative that humanity develop environmentally-sustainable sources of energy and methods of remediation. Nature achieves both of these by use of enzymes as catalysts, inspiring interest in designing biomimetic systems capable of harnessing clean energy and remediating industrial waste. This study examined the ability of enzymes in electrochemical and convective flow systems to achieve these tasks. The first portion studied the incorporation of enzymes into an electrochemical system to drive the …

Synthesis, Structural Diversity, And Redox Control Of Cyclometalated Monoruthenium Complexes, Zhong-Liang Gong, Jiang-Yang Shao, Yu-Wu Zhong

Journal of Electrochemistry

Cyclometalated ruthenium complexes have received increasing attractions recently due to their excellent redox and photophysical properties. One structural feature of these complexes is that there is a ruthenium-carbon (Ru-C) σ bond presented in the molecule. Three common methods, namely, the “late metalation”, “early metalation”, and “transmetalation” methods, for the synthesis of cyclometalated ruthenium complexes are discussed and summarized. General strategies for the design of cyclometalating ligand and cyclometalated ruthenium complexes are introduced. By using different ancillary ligands, such as pyridine, imidazole, triazole, and pyrimidine, a great number of ruthenium complexes can be prepared. The presence of the Ru-C bond significantly …

High Temperature Electrochemical Engineering And Clean Energy Systems, Brenda L. Garcia-Diaz, Luke Olson, Michael Martinez-Rodriguez, Roderick Fuentes, Hector Colon-Mercado, Josh Gray

Journal of the South Carolina Academy of Science

Global power demand is projected to more than double by 2050 and meeting this increased power demand will require maintaining or increasing power output from all existing energy sources while adding a large amount of new capacity. The power sources that have the greatest opportunity to fulfill this demand gap over this time period are clean energy sources including solar and nuclear power. One of the areas of expertise that SRNL has been applying to help with a variety of clean energy technologies is in high temperature electrochemistry. Savannah River National Laboratory (SRNL) in collaboration with industrial and university partners …

Electrochemical Detection Of Antioxidants, Garrett Thompson

Honors Theses and Capstones

No abstract provided.

Feasibility Of Cathodic Protection In Grouted Post Tensioned Tendons - Exploratory Model Calculations, Jacob Dharma Bumgardner

USF Tampa Graduate Theses and Dissertations

Recent corrosion related failures of grouted post tensioned tendons, even after the introduction of improved grouts, have led to renewed interest in supplemental or backup means of corrosion control for these systems. A finite element model is presented to explore feasibility of impressed current cathodic protection of strand in grouted tendons. The model examines polarization evolution as function of service time and includes consideration of anode placement and size, grout porosity, pore water alkalinity, electrochemical species diffusivity and applied voltage on the polarization efficacy and durability of such a system. The exploratory model projections suggested that, within the context of …