Chemical Engineering Commons^™

Calibration Of A Low-Cost Air Quality Sensor Package Integrated Into The New York State Mesonet, Ellie Hojeily

Electronic Theses & Dissertations (2024 - present)

The University at Albany designed and manufactured 59 low-cost air quality sensor packages to continuously measure PM₂.₅, CO, O₃, NO₂, and NO at 38 New York State Mesonet (NYSM) sites located in the New York City Metropolitan Area. Prior to use for monitoring, low-cost sensors require calibration to correct for environmental sensitivities. Calibration models can be developed using data collected from co-location periods in which low-cost sensors are installed at sites with Federal Reference Methods and/or Federal Equivalent Methods instruments. In this study, packages were periodically co-located (calibrated) for 18 to 162 days at the New York State Department of …

Using Preformed Particle Gels To Control Transport In Geothermal Reservoirs: Mathematical Modeling, Philip Winterfeld, Baojun Bai, Yu Shu Wu

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

We are developing swellable Preformed Particle Gels (PPG), which can control preferential fluid and heat flow through fracture networks to increase the performance of EGS reservoirs. Part of this development is a mathematical model and numerical simulator to simulate PPG treatments by considering coupled thermal-hydraulic-mechanical effects, and gel swelling kinetics and plugging efficiency, from which an optimized gel treatment design and operation can be achieved. The starting point for our mathematical model is the TOUGH2-CSM formulation and code. The TOUGH2-CSM fluid and heat flow formulation is based on the TOUGH2 one for multiphase, multicomponent, and multi-porosity systems, with the latter …

Predictive Modeling For Optimal Gel Treatment Design In Brownfields Using Ensemble Machine Learning And Data Upsampling Via Generative Ai, Munqith Aldhaheri, Baojun Bai, Mingzhen Wei

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Efficiently designed gel treatments play a vital role in extending the lifespan of brownfields through rejuvenating oil production. Recently, a three-mode mathematical methodology named the VCR approach has been proposed for designing effective treatments. To optimize this approach, it is crucial to determine the appropriate design mode systematically rather than relying solely on the intuitive judgments of field operators. This study introduces an advanced methodology for predicting the optimal design type of gel treatments using 12 reservoir and production variables. The methodology integrates ensemble machine-learning (EML) models with historical data from 65 field projects across 11 countries (1985-2020). The Random …

Identifying Potential Risk Areas Close To The Oil And Gas Pipelines Due To Subsidence In Qazvin Plain, Mahmoud Rajabi, Sanaz Vajedian, Ryan Smith, Neil Grigg, Hossein Nahavandchi, Mehdi Goli

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surface displacement caused by natural and anthropogenic activities poses a significant risk to subsurface pipelines, particularly in areas experiencing subsidence. Stress and strain induced by deformation can lead to pipeline buckling and potential vulnerability. This study applies a multidisciplinary approach integrating interferometric synthetic aperture radar (InSAR) deformation analysis, well data, and geological context to assess the risk to oil and gas pipelines in Iran's Qazvin plain. The focus is on evaluating the impact of an unconfined aquifer, which has a lower risk of subsidence compared to a confined aquifer, on pipeline infrastructure. We analyzed multitemporal Sentinel-1 data collected between 2014 …

Computational Modeling Of The Heat Treatment Of White Oak Bound For Spirit Maturation, Kate E. Mclarney-Popham

Theses and Dissertations--Chemical and Materials Engineering

Maturation of distilled spirits in white oak barrels is a long standing practice known to have great impact on spirit character. Much of this impact can be controlled by the thermal modification of the barrel, since thermal degradation of the wood determines what wood compounds are available to interact with the spirit during maturation. In this work, a computational model for the thermal degradation of wood was developed and, with flavor compound data from literature, was used to investigate the effect of heat treatment on lignin-derived flavor compounds. The computational model in this work accounted for three solid species, three …

The Optimization And Manufacturing Scale-Up Of Polymeric Membranes Using Eco-Friendly Solvents, David Lu

Theses and Dissertations--Chemical and Materials Engineering

Polymeric membranes have become a prominent technology applied in water filtration due to the lower cost, energy input, and simpler manufacturing process relative to other separation technologies. However, the environmental impact of polymeric membrane fabrication remains a hindrance due to the use of hazardous solvents derived from fossil fuels (e.g., DMAc, NMP, DMF) that pose a risk to the environment and human health. Whereas recent studies have demonstrated the proof-of-concept of polymeric membrane derived from eco-friendly solvents, the next steps of optimizing and upscaling the production of these membranes remains understudied and a gap between lab-scale studies and the path …

Ion Hydration In Bulk And Nanoconfined Water: Insights From Machine Learning Force Fields, Zachary D. Baker

Theses and Dissertations--Chemical and Materials Engineering

Understanding ionic hydration remains a central challenge in physical chemistry and materials science, as the interactions between ions and water molecules govern diverse phenomena ranging from electrolyte transport to selective ion separation. While experimental techniques have provided invaluable insights into solvation energetics and coordination numbers, they often lack atomistic resolution, particularly under nanoscale confinement where direct measurement becomes infeasible. Molecular dynamics (MD) simulations can bridge this gap; however, conventional classical force fields are limited by their simplified, fixed functional forms and empirical parameterization, whereas ab initio molecular dynamics (AIMD) achieves higher accuracy at the expense of severe computational cost and …

Understanding The Influence Of Applied Magnetic Field On Aluminum Alloys: Implications On Strength, Precipitate Development And Diffusion Of Solutes, Damilola David Alewi

Theses and Dissertations--Chemical and Materials Engineering

The processing of certain metals and alloys under magnetic fields presents a promising yet underexplored frontier for controlling microstructure alongside improving physical and mechanical properties. Magnetic fields can be strategically applied at different stages of materials processing, from melting and solidification to subsequent heat treatments to achieve targeted properties in materials. Although magnetic fields have been found to aid changes in microstructural evolution and phase equilibria in ferrous materials, there is limited application of this technique in non-ferrous material systems. This dissertation aims at contributing to the understanding of the influence of magnetic field on the mechanical properties and solid-state …

Bayesian Networks For Safety-Critical Systems, Joseph Mietkiewicz

Theses

This thesis addresses a operational challenge in modern industrial operations: the increasing complexity of systems and the consequent cognitive burden on operators. As industrial technologies advance, the human-computer interface has become the primary conduit for information flow, playing a pivotal role in operational decision-making. However, the proliferation of data often leads to information overload, potentially compromising rather than enhancing operator performance. This research explores an approach to this pressing issue through the application of Bayesian networks as decision support systems in safety- critical scenarios. Our study employs a multi-faceted approach, combining theoretical modeling with empirical testing. Through collaboration with industry …

Advances, Limitations, And Future Perspectives In 3d Printing Of Porous Glasses: A Technical Note, Hamed Bakhtiari, Mostafa Omidi Bidgoli, Mohammad Hosseini

Research outputs 2022 to 2026

In this study, the latest developments in 3D printing of porous glasses are discussed. Current challenges in 3D printing of porous-based microfluidic devices mostly include the printing resolution which is correlated with the processing time, post treating, and developing tailored materials for porous glasses. Although the latter issue has been resolved to some extent recently, the former has remained a challenge. Currently, the smallest 3D printed feature in a microfluidic structure is 200µm while higher resolutions are required in some applications. On the other hand, previous reports have shown intensive printing time for higher resolutions. To achieve an optimal compromise, …

Corrosion Behavior Of Niti Alloys Fabricated By Laser Powder Bed Fusion In Relation To The Formed Passive Films In Hank's Solution, Yi Fan Zhang, Liang Yu Chen, Yong Liu, Hong Yu Yang, Jin Hua Peng, Chuanbo Zheng, Lina Zhang, Lai Chang Zhang

Research outputs 2022 to 2026

Laser powder bed fusion (L-PBF) produced NiTi alloys have significant potential in biomedical applications. Varying the parameters of the L-PBF process may result in the NiTi alloys with different ratios of B2 and B19′ phases, thereby, the different corrosion performance in the human body. However, a dearth of research efforts remains dedicated to resolving this issue. This work employed three different but comparable sets of parameters in the L-PBF process to produce NiTi alloys with different ratios of B2 and B19′ phases. The corrosion behavior of samples in Hank's solutions with the addition of lactic acid and their evolution of …

Transfection Of Ionizable Lipid Nanoparticles On Raw 264.7 And Mda-Mb-231, Lavanya Bhargava

Masters Theses

"This thesis investigates the preparation, characterization, and transfection efficiency of various ionizable lipid nanoparticles (LNPs) formulated for the delivery of mRNA encoding enhanced green fluorescent protein (EGFP) in RAW 264.7 macrophages and MDA-MB-231 breast cancer cell lines. The ionizable cationic lipid studied are ALC-035, C12-200, C14-4, PPZ-A10, DLin-MC3-DMA. The study addresses the need for effective gene delivery systems to provide a safe and versatile platform that protects and transports nucleic acids into target cells. LNPs were synthesized using microfluidic mixing methods, incorporating lipid components such as the cationic lipids, DSPE, DOPE, cholesterol and PEG lipids to achieve controlled particle sizes, …

Catalytic Deoxygenation Of Oleaginous Biomass To Renewable Diesel And Sustainable Aviation Fuel Via Decarboxylation/Decarbonylation, Chukwudalu Great Umenweke

Theses and Dissertations--Chemistry

Several technologies have been developed to produce hydrocarbon biofuels – renewable diesel (RD) and sustainable aviation fuel (SAF) – from fats, oils, and greases (FOG), with the hydroprocessing of esters and fatty acids (HEFA) representing one of the most mature pathways. In its current form, HEFA is mainly reliant on the hydrodeoxygenation (HDO) reaction, which has several drawbacks since HDO requires large amounts and pressures of hydrogen, feedstocks of high purity and cost, as well as problematic sulfided catalysts that risk contaminating the biofuel product with sulfur. A process based on decarboxylation/decarbonylation (deCO_x) offers an attractive alternative to …

Predicting Complex Di-Alkylation Kinetics Using Machine Learning, Colin Bailey, Thomas Roper

Graduate Research Posters

Background: Predicting reaction kinetics for complex chemical systems often presents significant challenges due to intricate reaction pathways, multiple product formations, and competing side reactions. Additionally, the transient nature of reaction intermediates and limited experimental data complicate efforts to capture system dynamics accurately. These complexities necessitate advanced modeling approaches and precise experimental techniques to reliably describe and predict chemical behavior.

Methods: This work investigates the kinetics of di-alkylation of 4-Hydroxybenzoic Acid (4-HBA) using multiple machine learning algorithms, including Random Forest Regression, Gradient Boosting, Lasso, Ridge, and XGBoost. By leveraging reaction conditions, such as temperature, sulfuric acid equivalents, and initial concentrations of …

Mechanistic Scale-Up Of Gas-Solid Fluidized Beds Via Local Hydrodynamic Similarity, Faraj M. Zaid, Thaar M. Aljuwaya, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study presents a detailed experimental evaluation of a newly developed mechanistic scale-up methodology for gas-solid fluidized beds. Traditional scale-up approaches typically rely on matching global dimensionless groups, which often fail to ensure local hydrodynamic similarity. In contrast, the new mechanistic method aims to achieve scale-up by matching the radial profiles of gas holdup between geometrically similar beds at corresponding dimensionless axial positions (z/D_c). This approach is based on the premise that when gas holdup profiles align, other key hydrodynamic parameters—such as solids holdup and particle velocity—also become similar. To validate this methodology, experiments were conducted in two …

Enhancement Of Intersystem Crossing In Asymmetrically Substituted Bodipy Photosensitizers, Mikhail Filatov, Tatsiana Mikulchyk, Maxine Hodee, Metodej Dvoracek, Venkata N.K. Mamillapalli, Aimee Sheehan, Craig Newman, Sergey M. Borisov, Daniel Escudero, Izabela Naydenova

Articles

We present a novel method to promote intersystem crossing (ISC) and triplet state formation in boron dipyrromethenes (BODIPYs) through the asymmetrical introduction of functional groups within the chromophore. This approach enables the development of new BODIPY photosensitizers without relying on the incorporation of heavy atoms or large electron-donating aromatic groups. Demonstrated on a series of 14 synthesized asymmetrical BODIPY (aBDP) compounds, it significantly enhances photosensitization efficiency compared to the reference symmetrical BODIPYs. In particular, the asymmetrical introduction of ethoxycarbonyl groups into pyrrolic rings of the BODIPY core lead to efficient ISC and singlet oxygen generation, with quantum yields reaching 0.76 …

Synthesis And Assessment Of Biobased Acrylated Epoxidized Soybean Oil Resins For Stereolithography 3d Printing Of Microfluidic Devices, Natalie S. Romero Figueroa

College of Graduate Studies: Theses & Dissertations

This research focuses on the development and characterization of a biobased photocurable resin synthesized from soybean oil for use in stereolithography (SLA) 3D printing of microfluidic devices. The study explores a sustainable alternative to petroleum-based resins by performing an acrylation reaction on epoxidized soybean oil (ESO) to produce acrylated epoxidized soybean oil (AESO), which was then formulated into a photocurable resin with the addition of a photo initiator. The fabrication process involved designing microfluidic molds in SolidWorks and printing them using an Elegoo Mars 4 SLA printer under various exposure and layer thickness parameters. The printed samples consisted of microchannels …

Enhancing The Mechanical Properties Of Sla 3d-Printed Bio-Resin From Linseed Oil Using Cellulose And Lignin Biopolymers, Chukwunonso A. Ikedionu

College of Graduate Studies: Theses & Dissertations

Abstract

This research explores the development of bio resin from linseed oil by the process of epoxidation and acrylation to produce acrylated epoxidized linseed oil (AELO). Lignin and cellulose biopolymers were added as reinforcement at varying weight fractions of 1 wt.%, 2.5 wt.%, and 5 wt.%, and their mechanical performance was compared against pure AELO. The formulations were printed using an Elegoo SLA 3D printer to create standardized test specimens like tensile bars, compression cylinders, and hardness blocks, which were all prepared according to the ASTM testing standard.

The results indicate that reinforcement effects depend on both filler type and …

Visual Understanding Of Rock Wettability Distribution To Contact Angle Regions And Oil Displacement Patterns In The Silty Sand Reservoir Via 2d Pore-Scale Modeling, H. Al-Ajaj, W. Al-Bazzaz, Ralph E. Flori, S. Alsayegh, H. Almubarak, D. S. Ibrahim, H. Al-Saedi

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

This study, conducted using a silty sand reservoir rock extracted from a Kuwait-producing oilfield, provides crucial insights into fluid distribution patterns and mineralogy, as well as wettability contact angle preferences. The method used for visual identification not only captures rock physics but also suggests effective oil recovery displacement strategies. Visual identification is presented using 2D image technology and a Scanning Electron Microscope (SEM). Analytical data are presented from electron bombardments and backscattering reflections collected in the BSE detector. These analyses were used to characterize the various surface boundary morphology parameters of the silty sand mineral surfaces, including area, perimeter, mineral …

Investigation Of Dynamic Adsorption And Desorption Of Polymer Nanogel In Porous Media Through Microfluidics, Junchen Liu, Fuqiao Bai, Abdulaziz A. Almakimi, Mingzhen Wei, Xiaoming He, Ibnelwaleed A. Hussein, Baojun Bai

Mathematics and Statistics Faculty Research & Creative Works

Understanding the transport and retention of elastic nanogel and microgel particles in porous media has been a significant research subject for decades, essential to the application of enhanced oil recovery (EOR). However, a lack of dynamic adsorption and desorption studies, in which the kinetics in porous media are seldom investigated, hinders the design and application of polymer nanogel in underground porous media. In this work, we visualized and quantified the transport and dynamic adsorption of polymer nanogel in 3D glass micromodels that were manufactured by packing glass beads in capillaries. Calibrating the linearity of fluorescence intensity to concentration, we calculated …

Re-Crosslinkable Particle For Conformance Control And Temporary Plugging, Yifu Long, Bowen Yu, Baojun Bai, Thomas P. Schuman

Patents

The present invention generally relates to the composition of particle gels for conformance control, well drilling and well treatments. More particularly, this invention relates to swellable polymer particle gels that can re-crosslink, i.e., reassociate and self-heal, at subterranean conditions. These particle gels can be deployed to improve the conformance of water flooding of especially matrix bypass events (MBEs), that are also known as void space conduits. Moreover, these particle gels can be deployed for controlling the water production and increasing of petroleum recovery. The inventive particles can also be deployed as diverter for well stimulation.

Coating Compositions And Methods For Using The Same, Fateme Razaei, Thomas P. Schuman, Glenn C. Morrison

Patents

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO2 .

Thermo-Rheological And Tribological Properties Of Low- And High-Oleic Vegetable Oils As Sustainable Bio-Based Lubricants, Abiodun Saka, Tobechukwu K. Abor, Anthony C. Okafor, Monday U. Okoronkwo

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Vegetable oil-based lubricants have attracted increased research attention in recent decades as sustainable alternatives to conventional petroleum-based lubricants in metal machining. However, more studies are required to fully elucidate the thermo-rheological and tribological properties. This study presents an investigation of the thermo-rheological and tribological properties of different vegetable oils, including low- and high-oleic soybean oil, high-oleic sunflower, safflower, and canola oils. The lubricity, and evolution of viscosity and thermodynamic properties as a function of temperature were investigated to obtain important parameters including the viscosity index, flow behavior index, flow activation energy, specific heat capacity, thermal conductivity, coefficient of friction, contact …

Extraction And Separation Of Metal Cations From Synthetic Acidic Solutions Using Emulsion Liquid Membrane, Nouhaila Filali

Masters Theses

The work is organized into two main papers supported by experimental and comparative studies using Emulsion Liquid Membrane (ELM) systems. The first paper explores the individual extraction of heavy metals (Cd, Cr, As, Ni) from synthetic phosphoric acid using Alamine 336 and D2EHPA as carriers. Alamine 336 achieved the highest extraction efficiency (>90%) and stability, offering a promising route to reduce toxic impurities in fertilizer-grade acid. The second paper examines the selective separation of Ni2+ and Co2+ from various acidic solutions using the ELM configuration. Systematic variation of carriers, stripping agent and feed acidity, clarified transport mechanisms and stability, …

Ultrathin Film Coating And Element Doping For Lithium-Ion Battery Electrodes, Xinhua Liang, Yan Gao

Patents

The present invention relates to various lithium ion battery cathodes as well as lithium ion batteries incorporating one or more of these cathodes. The present invention further relates to processes of preparing the lithium ion battery cathode.

Additively-Manufactured Structure For Reactionary Processes, Fateme Rezaei, Ali Rownaghi, Shane Lawson

Patents

A method of additively manufacturing a structure for use in a reactionary process includes forming a material from metal or metal oxide particles, a dispersion solvent, and a binder. The method also includes depositing the material onto a build platform and curing the material to form a structure for use in a reactionary process. The structure includes the metal or metal oxide particles and is configured to provide a reaction when exposed to a reactant.

Nontoxic High Temperature Resistant Hydrogels, Thomas P. Schuman, Baujun Bai, Buddhabhushan Pundlik Salunkhe

Patents

Compositions of swellable non-toxic hydro gels and their use in conformance control are described herein. More specifically, the present invention generally relates to the hydro gels compositions that can be used to treat the oil reservoirs having high temperature and high salinity conditions. The compositions generally comprise a plurality of swellable particles having one or more crosslinkers interspersed within a polymer matrix. The compositions can also be used in biomedical, agricultural, fracking and similar applications wherein thermally-stable, nontoxic hydrogels are required.

Ground Testing Of A Magnetic-Electrostatic Separation System For Lunar Regolith Beneficiation, Peter Bachle, Charles Wood, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han

Materials Science and Engineering Faculty Research & Creative Works

The separation of lunar regolith by mineral composition and size category is useful forin-situ resource utilization (ISRU). The research presented herein discusses the designing and development of equipment that has the potential to separate lunar regolith into aluminum, iron-titanium, and magnesium-iron ores. Along with the metal ore separation, this equipment shows the potential to separate regolith by size categories. The combined effect of these separation methods generates output that is valuable to subsequent use in metal and oxygen extraction, additive manufacturing, and regolith sintering processes. The designed equipment uses a dual-strength magnet system with N42 and N52 neodymium magnets for …

Hybrid Rans-Les Analysis Of Turbulent Flame Under Near Blow-Off Condition In A Multi-Stage Swirl Combustor, Brandon O'Brien

College of Graduate Studies: Theses & Dissertations

Advances in computational resources are making computational fluid dynamics (CFD) increasingly accessible for a variety of engineering applications. However, certain complex problems, such as simulating detailed flame kinetics, remain computationally prohibitive for many users. Developing cost-effective methods to simulate these challenges would greatly benefit applications involving flame dynamics, such as turbine engines or industrial burners. This study investigates the effect of main stage swirler intensity on near lean blow-off characteristics in a multi-staged swirl combustor using Ansys Fluent. The hybrid RANS-LES turbulence model, Stress Blended Eddy Simulation (SBES) coupled with Flamelet Generated Manifold (FGM) combustion model was selected to model …

Modeling And Simulation Of Carbon-Neutral Strategies For Methanol Production, Omar Almaraz Barrios

Graduate Theses, Dissertations, and Problem Reports (ETD)

Methanol is a versatile chemical that can be used as a fuel, a solvent, a feedstock for other chemicals, and a hydrogen carrier. Methanol production from natural gas, which is mainly composed of methane, is a well-established process that involves steam reforming, methanol synthesis, and methanol purification. However, this process is energy-intensive and emits large amounts of carbon dioxide, which contributes to global warming and climate change. Therefore, there is a need for alternative methods of methanol production that are more efficient and environmentally friendly. The overall objective of this research is to develop simulation models of two novel methanol …