Chemical Engineering Commons^™

Physics-Informed Neural Network For Maximum Detectable Distance Estimation In Mobile Gamma Spectrometry, Nancy A. Ibrahim

Theses and Dissertations

Accurate estimation of the Maximum Detectable Distance (MDD) is critical for environmental remediation, nuclear incident response, and public safety. Conventional approaches assume stationary detectors and rely on computationally intensive simulations, limiting their applicability for mobile, real-time surveys. Mobile gamma spectrometry introduces additional complexities due to detector motion, variable acquisition times, and heterogeneous backgrounds. This study addresses the central question of how effectively a Physics-Informed Neural Network (PINN) can estimate MDD for mobile gamma spectrometry, while maintaining both accuracy and computational efficiency under dynamically changing environmental conditions. A multi-phase approach was employed, combining field data collection, computational modeling, and operational tool …

Advancing Sustainable Co2 Mitigation: Experimental And Computational Analysis Of Thermal Carbon Chitosan Sorbent For Automotive Exhaust Capture, Dalia A. Ali Dr., Amir Ahmed Elgamal Eng., Rania Rushdy Moussa Dr.

Chemical Engineering

This study investigated the efficiency of thermal carbon chitosan (TCCS) sorbent for CO2 capture from vehicle exhaust emissions within a designed adsorption system. TCCS was synthesized and meticulously characterized using a series of analytical techniques, including Brunauer-Emmett-Teller (BET) surface area analysis, Scanning Electron Microscopy (SEM), Fourier Transform Infrared Spectroscopy (FTIR), X-ray Diffraction (XRD), Ther- mogravimetric Analysis (TGA), Energy Dispersive X-ray Spectroscopy (EDX), and Differential Scanning Calo- rimetry (DSC). The TCCS adsorbent showed high thermal stability and a heating value (HHV) of 23.5 MJ/kg. Adsorption isotherm study demonstrated that the maximum capacity of CO2 adsorption is 0.084 kg.CO2/kg. TCCS, as well …

Mechanistic Modelling And Parameter Estimation Of Heterogeneous Catalytic Synthesis Of Green Fuel, Rasheed U. Owolabi, Obinna P. Anele, Mohammed A. Usman

Mansoura Engineering Journal

Investigation of the kinetics and mechanistic modelling of biodiesel synthesis through the reaction of castor oil with methanol under catalyzed conditions was carried out in this study. The reaction mechanisms of the Eley-Rideal, Langmuir-Hinshelwood-Hougen-Watson, and Hattori type were employed to identify the rate-determining or controlling step of the reaction. Thirteen rate expressions were developed for reactant adsorption, product desorption, and surface chemical reactions. The experimental data from Sanchez-Cantu et al. were used to validate the models, and the best-fitting model and parameter estimation were evaluated using SAS and MATLAB software. From the results, the Eley-Rideal mechanism with glycerol desorption as …

Engineered Multifunctional Drug-Loaded Dendrimer Nanoparticles For Glaucoma: Triple Mechanism Via Antioxidant Activity, Iron Chelation, And Enhanced Ocular Transport, Burhan Ates, Ashish Trital, Vimalin Jeyalatha Mani, Lei Xu, Jonathan Kenlee, Nuran Ercal, Hu Yang

Chemistry Faculty Research & Creative Works

In this study, we developed multifunctional nanoparticles based on polyamidoamine (PAMAM) dendrimers functionalized with caffeic acid (CA) and poly (ethylene glycol) maleimide (PEGM) for the topical delivery of hydrophobic antiglaucoma drugs brimonidine (BM) and betaxolol (BX). The PAMAM-CA and PAMAM-CA-PEGM conjugates exhibited antioxidant and iron-chelating activities in a dose-dependent manner. BM- and BX-loaded dendrimer nanoparticles produced using a multi-inlet vortex mixer showed uniform spherical morphology (∼80 nm by TEM) and hydrated sizes of ∼135-144 nm by DLS. Both nano formulations demonstrated high cytocompatibility with human corneal epithelial cells and were nonirritant in the HET-CAM assay, with PEGM further improving cytocompatibility. …

Fabrication And Evaluation Of Large Alumina Crucibles By Vat Photopolymerization Additive Manufacturing For High-Temperature Actinide Chemistry, R. Joey Griffiths, Christy Santoyo, Jean-Baptise Forien, Bradley Childs, Andrew J. Swift, Andrew Cho, Alexander Wilson-Heid, George Ankrah, Devin Rappleye, Aiden A. Martin, Jason Jeffries, Kiel Holliday

Faculty Publications

Additive manufacturing (AM) offers opportunities to advance the design and function of ceramic tooling in high temperature actinide pyrochemistry. In technical ceramics such as alumina, conventional forming techniques often restrict design flexibility and can limit experimental progress. In this study, we investigate the use of vat photopolymerization (VP) with commercial resins to fabricate large-scale alumina crucibles, reaching dimensions up to 125 mm, which is significantly larger than typically reported for dense VP ceramics. Notably, these additively manufactured components are produced using consumer-grade hardware, which limits process control, but offers significant upside in scalability and accessibility. Using microscopy and X-ray computed …

Experimental Measurement Demonstration Of Initial And Steady-State Heights Of A Co2 Vertical Jet Fountain In Still Air, Brock Mcrae

Chemical Engineering Undergraduate Honors Theses

Atmospheric releases of heavier-than-air gases pose acute near-field hazards in low wind, yet the near-source behavior of vertical dense-gas jets in still air is sparsely documented. This thesis demonstrates a repeatable laboratory method for measuring the initial and steady-state rise heights of a carbon dioxide (CO₂) jet issued vertically from a floor nozzle in the CHRC ultra-low-speed wind tunnel under still-air conditions. Controlled mixtures (pure CO₂, 50/50 CO₂-air, 25/75 CO₂-air) were released at four flow rates (75, 100, 125, 150 LPM) with five repeats per condition. A fixed camera and tape-measure scale enabled video extraction of jet height using Kinovea …

Dendrimer Gel Nanoparticles With Dual-Targeting Of Upar And Ribonucleotide Reductase R2 Influence Necrosis, Apoptosis, And Cell Cycle Arrest In Triple-Negative Breast Cancer, Hsin Yin Chuang, Yue-Wern Huang, Hu Yang

Biological Sciences Faculty Research & Creative Works

Triple-negative breast cancer (TNBC) is an aggressive breast cancer subtype with limited treatment options due to the absence of estrogen (ER), progesterone (PR), and human epidermal growth factor receptor 2 (HER2) receptors. We previously developed highly adaptable polyamidoamine (PAMAM) dendrimer-based gel nanoparticles (GDP-uPA/GTI) with dual-targeting capabilities against urokinase-type plasminogen activator receptor (uPAR) and ribonucleotide reductase R2 (R2) to achieve selective antitumor effects. In this study, we investigated the underlying mechanisms of GDP-uPA/GTI-induced tumor inhibition. In vivo, GDP-uPA/GTI significantly downregulated R2 expression and activated caspase 8 and caspase 3, indicating caspase-dependent apoptosis. Histological evaluation of major organs revealed no observable toxicity. …

Upcycling Commodity Polymers To Advanced Materials For Energy And Environmental Sustainability, Anthony Griffin-Espinoza

Dissertations

Synthetic polymers play an essential role in nearly every aspect of our lives. Extending beyond single-use packaging, polymeric material design has progressed to attain tailorable architectures granting exceptional performance across advanced applications, including carbon-fiber reinforced polymer composites for aerospace, conductive materials for soft electronics, and drug carriers for biomedicine. While highly promising, intricately designed polymers needed to achieve excellent performance often have limited processability, complex synthetic methods, and expensive precursors. Furthermore, due to a lack of recyclability, commodity polymer waste streams result in both environmental impacts and a substantial loss of economic value. This dissertation focuses on developing robust strategies …

Design Of Tertiary Z-Scheme Cuo–Zno@Mxene Photocatalyst With Superior Visible-Light Activity For Decomposition Of Nanoplastics, Ahmad Najafidoust, Javad Farahbakhsh, Roham Ghanbari, Mohadeseh Najafi, Alireza Keshavarz, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Plastic pollution has resulted in the widespread accumulation of nanoplastics (NPs) in aquatic environments, highlighting the need for innovative remediation strategies. In this study, a tertiary z-scheme CuO–ZnO/MXene nanocomposite was developed for the visible-light-assisted degradation of polyethylene-based NPs. ZnO particles were doped with 8 % CuO to form a p-n type heterojunction, and the resulting CuO–ZnO nanoparticles were anchored onto two-dimensional MXene sheets through a sono-precipitation dispersion method, forming a ternary z-scheme photocatalyst with enhanced surface area. The composite exhibited a low electron-hole recombination rate and a tunable band gap (~2.55 eV), enabling efficient visible-light absorption. Under visible light irradiation, …

Calibration And Validation Of Cyclic Stretching Platform For Stiffness Testing Of Engineered Heart Tissue, Jillian Welsh

Chemical Engineering Undergraduate Honors Theses

Cardiac fibrosis (CF) is a major contributor to the high mortality rate of heart failure which affects over 23 million people worldwide. CF involves cardiac fibroblasts depositing extracellular matrix, made primarily of collagen type I, which stiffens the heart walls over time. As testing new drugs for CF is deterred by the high cost and time required for animal and clinical trials, this research helps to solve the problem by providing an in vitro platform to study fibrosis.

The work involved creating tissues containing human cardiac fibroblast (HCFB) cells. Spring testing was conducted to determine the force applied by the …

The Significant Impact Of Hot Isostatic Pressing On The Corrosion Behavior Of Ti-6al-4v Alloy Prepared By Electron Beam Powder Bed Fusion, Hongyu Zheng, Yun Bai, Wentao Hou, Zirong Zhai, Lai Chang Zhang, Shujun Li, Rui Yang

Research outputs 2022 to 2026

This work investigated the effect of hot isostatic pressing (HIP) on the corrosion behavior of Ti-6Al-4V samples prepared by electron beam powder bed fusion (EB-PBF). After the HIP treatment, the TiO2 content decreased but the growth rate of passivation films increased, leading to increase in internal defect density, thereby degrading the corrosion resistance. Amongst the different factors impacted by HIP including pore defects, β-phase, texture and morphology of α-phase, the morphology of α-phase played a dominant role in determining the corrosion performance of EB-PBF processed alloy.

The Microbial Factor In Subsurface Hydrogen Behavior: Implications For Wettability And Interfacial Dynamics, Hamid Esfandyari, Raziallah Jafari Jozani, Aliakbar Hassanpouryouzband, Farhid Hemmatzadeh, Manouchehr Haghighi, Stefan Iglauer, Alireza Keshavarz, Abbas Zeinijahromi

Research outputs 2022 to 2026

Microbial activity plays a significant role in subsurface hydrogen behavior, with implications for underground storage and natural hydrogen systems. This study examines how microbial processes influence the wettability and solid–liquid interfacial characteristics of key subsurface minerals, calcite, dolomite, quartz, and gypsum, in hydrogen-brine-rock systems under realistic subsurface conditions. Wettability directly affects hydrogen distribution, flow dynamics, and trapping, making it a critical factor for both storage and natural recovery applications. Experiments were conducted under high-pressure, high-temperature conditions, with SEM/EDS analysis used to characterize interfacial modifications and mineral surface changes across three scenarios: clean, organic acid-aged, and microbial-aged. Microbial aging consistently increased …

Nanao/Organocatalyat Sio2/4-(2-Aminoethyl)-Morpholine As A New, Reusable, And Efficacious Catalyst For The Synthesis Of Polyhydroquinolines Derivatives And Antibacterially Active Evaluation, Leila Amiri-Zirtol, Zahra Karimi, Javad Farahbakhsh, Ahmad Gholami, Seyedeh Narjes Abootalebi

Research outputs 2022 to 2026

In this study, a new nanocomposite comprising 4-(2-Aminoethyl)-morpholine, an organic catalyst, was prepared on the surface of silica. The absence of metal in the catalyst structure contributes to its environmental friendliness. This novel nanocatalyst was used for multi-component reactions (MCRs). Having a nano size for the composite enhances the contact between the raw materials and the catalytic surface, leading to significant advancement in the reaction. The synthesized composite was identified and evaluated using FT-IR, EDX, EDX-Mapping, TGA, XRD, BET, TEM, and FE-SEM analysis. The characteristic analysis confirmed the synthesis of both nano-silica/4-(2-Aminoethyl)-morpholine catalyst and polyhydroquinoline. The composite’s catalytic properties for …

Performance Study Of A Woody Downdraft Gasifier: Numerical Investigation And Experimental Validation, Md Sanowar Hossain, Showmitro Bhowmik, Mujahidul Islam Riad, Md Golam Kibria, Barun K. Das, Sanjay Paul

Research outputs 2022 to 2026

Biomass gasification is an established and widely utilized renewable energy system. The research work aims to develop and construct a downdraft gasifier to investigate gasifier performance. The gasifier’s performance and cold gas efficiency were calculated for three volumetric airflow rates: 7.16 m3/h, 5.97 m3/h, and 4.78 m3/h. The efficiency was found maximum of 69.6% for an airflow rate of 7.16 m3/h. The oxidation zone and neck region of the gasifier reactor had the maximum recorded temperatures of 845 °C and 823 °C for Swietenia macrophylla (SM) and Mangifera indica (MI), respectively. A two-dimensional computational fluid dynamics (CFD) model for a …

Interface Engineering And Safety In Solid-State Batteries: Advancing From Human-Centered Insights To Ai-Driven Innovations, Elnaz Karimi, Stefan Iglauer, Muhammad Rizwan Azhar

Research outputs 2022 to 2026

Solid-state batteries (SSBs) represent a transformative advancement in energy storage, offering superior safety, higher energy density and extended cycle life compared to conventional lithium-ion batteries (LIBs). However, challenges related to interface engineering—particularly in ensuring stable electrochemical performance and preventing lithium dendrite formation—have hindered their widespread adoption and can compromise safety. Effective interface engineering is critical for mitigating interfacial resistance, enhancing mechanical stability and preventing thermal runaway, all of which are vital for improving battery reliability. The integration of artificial intelligence (AI) and machine learning (ML) in this context accelerates battery optimization by enabling predictive modelling of interfacial behaviour, material discovery …

Biopolymer-Based Membranes And Their Application In Per- And Polyfluorinated Substances Removal: Perspective Review, Roham Ghanbari, Ratish Permala, Stefan Iglauer, Masoumeh Zargar

Research outputs 2022 to 2026

Over the past 2 decades, per- and polyfluoroalkyl substances (PFAS) have attracted considerable attention due to their widespread occurrence and adverse effects on both the environment and human health. PFAS possess strong carbon‑fluorine bonds that confer exceptional chemical stability and resistance to natural degradation; their fluorinated chains are highly hydrophobic and oleophobic, while their polar functional groups contribute to amphiphilic behavior and water solubility. Certain PFAS thus pose serious risks to living organisms, especially mammals. Membrane filtration is recognized as a particularly effective technique, achieving removal efficiencies greater than 99 % for long-chain-PFAS (including anionic, cationic, and zwitterionic PFAS molecules). …

Polydopamine-Coated Magnetic Nanoparticles Data, William G. Pitt

ScholarsArchive Data

This data archive contains raw data and processed data related to research and development of magnetic nanoparticles that adhere to bacteria. This data is the foundation of data in the MS thesis of Bowen Houser, and publications and presentations related to that research effort. Polydopamine-coated magnetic nanoparticles are found to be very adhesive to gram-positive bacteria, and less adhesive to gram-negative bacteria. These data files contain information for S. aureus, S. epidermidis, S. mutans, E. coli, P. aeruginosa, and N. perflava. Some data include the kinetics of capture.

Data Release Of 5-Fluorouracil From Polylactic Acid Microparticles Containing Magnetic Nanoparticles, William G. Pitt

ScholarsArchive Data

This data archive contains raw data and processed data related to research and development of the release of the chemotherapy drug 5-fluororacil from microparticles of poly(lactic acid) which also contain superparamagnetic magnetite nanoparticles. This data is the foundation of data in the MS thesis of Tyler Green, and publications and presentations related to that research effort.

Photocatalytic Performance Of N-Doped Ti3o5 Nano-Catalyst For Phenolic Compounds Removal From Industrial Wastewaters, Mehdi Narimani, Maryam Gonbadi, Mahsa Navabi, Fatemeh Khezri-Shooshtari, Amin Ale Ebrahim, Mohammad Mahdi Zerafat

Research outputs 2022 to 2026

This study is focused on the synthesis and evaluation of TiO2 and N-doped Ti3O5 for the photocatalytic degradation of phenol as a noxious substance commonly present in the industrial process effluents with harmful effects on human and the environment. The research addresses the critical environmental challenge posed by phenol-contaminated effluents from petrochemical industries. Leveraging Response Surface Methodology with Box-Behnken design, 17 experiments were conducted to analyze the impact of independent variables such as photo-catalyst dosage, pH, and irradiation time on degradation efficiency. Notably, the average crystallite sizes were determined as 20 nm for TiO2 and 58.3 nm for N-doped Ti3O5. …

Theory And Technology Of Enhanced Coal Seam Gas Production By Integrated Drilling, Hydraulic Punching And Fracturing In Coal Mine: Part 2 Technology, Shiyao Yu, Xianbo Su, Jinxing Song, Qian Wang, Zhenjiang You

Research outputs 2022 to 2026

To enhance the efficiency and cost-effectiveness of coal seam gas extraction in coal mines, this study introduces an integrated approach combining drilling, hydraulic punching, and fracturing technologies. This method optimizes drilling media tailored to specific coal seams and fine-tunes technical parameters during drilling and permeability improvement processes. Furthermore, it clarifies the relationships among the coal breaking rate, discharge of drill cuttings, jet velocity, rotation speed, and displacement. This ensures precise and effective permeability improvement in both soft and hard coal formations. To implement this technology, a set of high-performance drilling tool with a large inner diameter, high pressure resistance, and …

Theory And Technology Of Enhanced Coal Seam Gas Production By Integrated Drilling, Punching And Fracturing In Coal Mine: Part 1 Theory, Shiyao Yu, Xianbo Su, Jinxing Song, Qian Wang, Zhenjiang You

Research outputs 2022 to 2026

Coal seams in China are typically characterized by high coal seam gas content and low permeability, posing challenges for efficient coal seam gas extraction. However, achieving successful boreholes, especially in soft coal formations, remains a challenge. The mechanisms underlying permeability improvement in different coal structures need further exploration. Therefore, this paper is focused on the fundamental principles of permeability improvement in soft coal through hydraulic punching, and in hard coal via hydraulic jet fracturing. Firstly, borehole instability results from a dynamic interplay of four factors: in situ stress, coal structure, mechanical properties of coal with fluid, and drilling technology. While …

Breaking Through The Strength-Ductility Trade-Off Of Lpbf-Produced Ti-Xnb Alloys From Mixed Powders Via Ω-Phase Induced Heterostructure, Jian Bo Jin, Shengfeng Zhou, Huan Yang, Junjie Yang, Zhiguo Zhang, Baisong Guo, Lai Chang Zhang

Research outputs 2022 to 2026

Highlights Powder-mixed Ti-35Nb alloy produced by LPBF breaks through the strength-ductility trade-off. The ultimate strength, uniform elongation and Young’s modulus of heterostructured Ti-35Nb alloy are (806 ± 7) MPa, (18.0 ± 1.1)%, and (68 ± 6) GPa, respectively. In-situ laser re-melting improves elemental distribution uniformity in LPBF-produced powder-mixed Ti-xNb alloys. Optimized Nb content induces the phase transformation of β + α′ → β + ω in Ti-xNb alloy. Heterostructured β + ω/β enhances the strength-ductility synergy of Ti-35Nb alloy.

Process Intensification Of Essential Oils Extraction Using Instantaneous Controlled Pressure Drop Technology, Muhammad Hassnain, Mohammed Ilyas Khaledi, Muhammad Rizwan Azhar

Research outputs 2022 to 2026

Essential oils (EOs) are volatile, hydrophobic compounds derived from plants, widely used in food, cosmetic, pharmaceutical, and fragrance industries for their bioactive potential and associated health benefits. Traditional EO extraction methods are limited by low yields, long processing times, and thermal degradation of sensitive bioactive compounds. Instantaneous Controlled Pressure Drop (CID) technology is an advanced intensification method to overcome these challenges by applying compression-decompression cycles and modifying plant structure to enhance heat and mass transfer. This review provides a comprehensive analysis of CID technology and outlines its mechanism and principles. It compiles global research on CID applied to different plants …

Enhanced Degradation Of Triclosan Using Aerated Hydrodynamic Cavitation: Turbulence-Based Modelling And Economic Evaluation, Mehdi Khiadani, Ensiyeh Taheri, Veena Bobade, Ali Fatehizadeh

Research outputs 2022 to 2026

Pharmaceutical and personal care product (PPCP)-contaminated wastewater, particularly with triclosan (TCS), poses a significant environmental concern due to TCS persistence, ecotoxicity, and endocrine-disrupting effects, necessitating the development of efficient and sustainable remediation technologies. In this study, the degradation of TCS using hydrodynamic cavitation coupled with air injection (aerated HC process) is investigated as a green and chemical-free treatment method for wastewater treatment. Initially, the optimum operating conditions of the standalone HC process were determined by varying the inlet pressure and flow rate, which were found to be 2.34 bar and 0.45 L/s, respectively, corresponding to the highest turbulence frequency level …

Experimental Study On Stability, Rheology, And Co2 Storage Capacity Of Polymer-Enhanced Foams In Carbonates, Muhammad Mushtaq, Mudassar Mumtaz, Emad W. Al-Shalabi, Waleed Alameri, Georgios N. Karanikolos, Stefan Iglauer

Research outputs 2022 to 2026

Polymer-enhanced CO2 foam (PEF) is an emerging technology that improves gas mobility control in chemical enhanced oil recovery applications. It also has significant potential for storing CO2 in geological formations, which can help mitigate anthropogenic emissions. Traditional surfactant-based foams are often weak and unstable, particularly under the high-salinity and high-temperature conditions commonly found in Middle Eastern carbonate reservoirs. However, adding a small amount of stable polymer to these foams can enhance their stability, rendering them more suitable for harsh environments. This study focuses on designing and thoroughly evaluating a PEF formulation under supercritical CO2 conditions at 95 °C temperature, 1500 …

Advanced Membrane Methods For Treatment Of Toxic Contaminants And Education Of Early-Career Researchers, Thomas Mckean Iii

Graduate Theses and Dissertations

Membrane technologies are attractive as they are linearly scalable and often require lower operating costs compared to other technologies. One area where they are particularly effective is the treatment of water contaminated with toxic substances. The simplicity of this removal mechanism provides reliable performance capable of meeting stringent removal requirements. However, membrane fouling is a major challenge that often limits their commercial viability. This research sought to investigate novel approaches to pretreatment and membrane modification to overcome fouling and high operating pressures. In addition, membrane separation processes can often be developed into simple yet educational experiments that are ideal for …

Developing A Metabolic Engineering Chassis From A Metabolically Versatile Organism, Rhodopseudomonas Palustris Cga009, Mark William Kathol

Dissertations and Doctoral Documents, University of Nebraska-Lincoln, 2023–

Metabolic engineering has made it possible to develop biological processes that were once considered economically unfeasible or uncompetitive. This field has enabled both a robust niche market, whereby products, such as pharmaceutical substances like monoclonal antibodies, are produced exclusively through biological means, as well as an emerging commodity production market. Nonetheless, significant challenges remain in harnessing the unique metabolic capabilities of genetically non-tractable organisms. This dissertation focuses on Rhodopseudomonas palustris CGA009 as a potential chassis for metabolic engineering. To address the issue of genetic intractability, a synthetic biology toolkit was developed to facilitate the expression of heterologous proteins in R …

Bone Void Filler Materials For Augmentation In Comminuted Fractures: A Comprehensive Review, S. Sina Mohammadi, Sunjeev S. Phull, B. Sonny Bal, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Comminuted fractures, characterized by multiple bone fragments, present significant challenges in orthopedic surgery. Effective treatment often requires augmentation techniques to enhance fixation stability and promote bone regeneration. This review explores the application of bone void filler materials, including autografts, allografts, polymethyl methacrylate (PMMA), and synthetic bone substitutes such as calcium phosphate ceramics and bioactive glass, in managing comminuted fractures. Autografts are the gold standard due to their superior osteogenic potential but are limited by donor site morbidity and availability. Allografts mitigate these issues but face concerns regarding immunogenicity and reduced biological activity. PMMA, widely used for structural augmentation, provides immediate …

Local Hydrodynamics And Phase Distribution In Large-Scale Trickle Bed Reactors Using Multi-Detector Γ-Ray Densitometry, Sebastián Uribe, Ahmed Jasim, Saba A. Gheni, Nora Selem, Nouhaila Filali, Tiberiu M. Leib, Sourav Sengupta, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

This study presents a new approach of using gamma ray computed tomography (CT) in a form of arc multi-detector γ-Ray Densitometry (Arc MD-GRD) Technique where it measures the line averaged holdups of the phases which are projected on the diameter of the column to obtain their diameter profiles. This technique then was used to investigate the diameter profiles of the phases' holdups in a 12-inch diameter trickle bed reactor (TBR) using sulfur hexafluoride (SF6) as the gas phase to represent to a certain extent the industrial higher density of the used gas phase due to either the type of the …

Purifying Circular Rna Therapeutics, Karen Guillen-Cuevas

All Dissertations

Circular RNA (circRNA) has emerged as a promising therapeutic modality due to its enhanced stability and resistance to exonuclease degradation compared with linear mRNA. However, its stability and functionality depend strongly on achieving high purity, and current methods such as size-exclusion chromatography suffer from peak overlap, low yields, and poor scalability. This dissertation addresses these limitations by developing ultrafiltration-based strategies to purify circRNA directly from in vitro transcription (IVT) and self-splicing (circularization) reactions. First, the feasibility of ultrafiltration was demonstrated using polyethersulfone membranes, where sieving coefficients and critical flux values of circRNA, precursor RNA, and nicked RNA were measured to …