Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Physical Sciences and Mathematics (141)
- Materials Science and Engineering (139)
- Biochemical and Biomolecular Engineering (122)
- Chemistry (92)
- Petroleum Engineering (89)
-
- Catalysis and Reaction Engineering (88)
- Electrical and Computer Engineering (86)
- Mechanical Engineering (75)
- Process Control and Systems (69)
- Materials Chemistry (59)
- Nanoscience and Nanotechnology (52)
- Operations Research, Systems Engineering and Industrial Engineering (52)
- Engineering Science and Materials (51)
- Polymer Science (49)
- Biomedical Engineering and Bioengineering (48)
- Civil and Environmental Engineering (48)
- Geological Engineering (44)
- Complex Fluids (42)
- Other Chemical Engineering (42)
- Physical Chemistry (40)
- Thermodynamics (39)
- Controls and Control Theory (38)
- Power and Energy (37)
- Life Sciences (33)
- Industrial Technology (30)
- Analytical Chemistry (28)
- Medicine and Health Sciences (25)
- Transport Phenomena (24)
- Institution
-
- Missouri University of Science and Technology (129)
- Edith Cowan University (49)
- Chulalongkorn University (43)
- Tashkent State Technical University (39)
- University of Kentucky (38)
-
- Chinese Chemical Society | Xiamen University (37)
- Brigham Young University (35)
- The British University in Egypt (24)
- University of South Carolina (24)
- West Virginia University (19)
- University of Arkansas, Fayetteville (18)
- University of Dar es Salaam (17)
- United Arab Emirates University (16)
- Universitas Indonesia (16)
- The University of Akron (15)
- Clemson University (13)
- Rowan University (13)
- Al Esraa University (12)
- Michigan Technological University (12)
- City University of New York (CUNY) (11)
- Louisiana State University (11)
- New Jersey Institute of Technology (11)
- Washington University in St. Louis (11)
- University of Louisville (10)
- Old Dominion University (9)
- Syracuse University (9)
- Tashkent Institute of Chemical Technology (9)
- University of Nebraska - Lincoln (8)
- Wayne State University (8)
- University of New Mexico (7)
- Keyword
-
- Adsorption (11)
- Machine learning (11)
- Optimization (11)
- Electrocatalysis (9)
- Polymers (9)
-
- [RSTDPub] (9)
- Lignin (8)
- Rheology (8)
- Sustainability (8)
- Electrochemistry (7)
- Lithium-ion batteries (7)
- Thermodynamics (7)
- Modeling (6)
- Simulation (6)
- DFT (5)
- Department of Chemical Engineering (5)
- Engineering (5)
- Enhanced oil recovery (5)
- Machine Learning (5)
- Nanoparticles (5)
- Techno-economic analysis (5)
- 3D printing (4)
- Additive manufacturing (4)
- Biochar (4)
- Biodiesel (4)
- Cancer (4)
- Catalysis (4)
- Control (4)
- Corrosion (4)
- Diffusion (4)
- Publication
-
- Chemical and Biochemical Engineering Faculty Research & Creative Works (54)
- Research outputs 2022 to 2026 (49)
- Chulalongkorn University Theses and Dissertations (Chula ETD) (43)
- Faculty Publications (40)
- Theses and Dissertations (40)
-
- Journal of Electrochemistry (37)
- Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works (36)
- Chemical Technology, Control and Management (33)
- Chemical and Materials Engineering Faculty Publications (32)
- Graduate Theses, Dissertations, and Problem Reports (ETD) (19)
- Dissertations (18)
- Tanzania Journal of Engineering and Technology (TJET) (17)
- Williams Honors College, Honors Research Projects (15)
- Chemical Engineering (13)
- Doctoral Dissertations (13)
- Al-Esraa University College Journal for Engineering Sciences (12)
- Electronic Theses and Dissertations (11)
- McKelvey School of Engineering Graduate Student Theses & Dissertations (10)
- All Dissertations (9)
- CHEMISTRY AND CHEMICAL ENGINEERING (9)
- Dissertations and Theses (9)
- Thesis/ Dissertation Defenses (9)
- Honors Theses (8)
- Chemical Engineering and Materials Science Faculty Research Publications (7)
- Dissertations - ALL (7)
- LSU Doctoral Dissertations (7)
- Petroleum Engineering and Gas (7)
- USF Tampa Graduate Theses and Dissertations (7)
- Journal of Materials Exploration and Findings (6)
- Makara Journal of Science (6)
- Publication Type
- File Type
Articles 601 - 630 of 768
Full-Text Articles in Chemical Engineering
Wetting Transition Of 3d-Printed Surface Features, Delia Weitzel
Wetting Transition Of 3d-Printed Surface Features, Delia Weitzel
Williams Honors College, Honors Research Projects
This project aims to build on the previous research of prior students in the study of the wetting transition of a textured, 3D-printed surface. The surfaces studied will be constructed by a resin printer in the lab and will be composed of an array of uniform, microscopic pillars. Features of the textured surface, such as pillar diameter, pillar spacing, and pillar height, will be varied to study the impact on the wetting transition of water, oil, and a combination of water and oil. The wetting transition is defined as a transition from a state where the surface cavities are occupied …
The Effects Of Relative Humidity And Valency On Water Absorption And Structure In Polyelectrolyte Brushes, Andrea Klima
The Effects Of Relative Humidity And Valency On Water Absorption And Structure In Polyelectrolyte Brushes, Andrea Klima
Williams Honors College, Honors Research Projects
The purpose of this project was to understand the relationship between relative humidity, ion valency, and the structure of water on positively (PMETAC) and negatively (PSPMA) charged polyelectrolyte brushes. The polyelectrolyte brushes were synthesized using Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization (ARGET ATRP) and were soaked in concentrations containing 0.1 M of the target counterion. The brushes were then exposed to humid vapor, and spectra were collected in 5% intervals between 0% and 85% for each counterion. Two trials were completed for each counterion studied to ensure agreement between datasets. In all spectra, peaks appeared for the …
Degradable Staples And Delivery Device, Meha Elango, Jessica Cabrera, Makayla Scarpitti, Kareemat Melaiye
Degradable Staples And Delivery Device, Meha Elango, Jessica Cabrera, Makayla Scarpitti, Kareemat Melaiye
Williams Honors College, Honors Research Projects
The scope of this project is to design a method to secure skin grafts to healthy tissue. The ultimate goal for the proposed method is to be dissolvable in some form. Currently, skin grafts procedures utilize staples in most cases to hold a skin graft in place, but there are disadvantages that come with it. Staples are easy to place, but time consuming during the removal procedure. They also cause a lot of pain and discomfort for the patient. The goal of this project is to determine a way a secure skin grafts to healthy skin in order to reduce …
Assessing Co2 Capture On Amine Sorbents At Low Vacuum Swing Conditions, Brock Haas, Payton Taylor
Assessing Co2 Capture On Amine Sorbents At Low Vacuum Swing Conditions, Brock Haas, Payton Taylor
Williams Honors College, Honors Research Projects
Carbon dioxide (CO2) emissions to Earth's atmosphere have increased rapidly in recent decades largely due to growing fossil fuel use in human-led activities The research contained in this proposal assesses a way to capture CO2 concentration in the atmosphere. The project studies the effectiveness of a vacuum swing adsorption (VSA) process for capture of CO2 from air. CO2 will first be adsorbed by introducing an amine sorbent to a CO2-rich environment for a predetermined period. The amine sorbent will be placed in a VSA unit that will operate at the desorption stage. The sorbent will then be sent to a …
Design Of An Experimental Solid Rocket Motor, Johnathan Bettes, Andrew Fuller
Design Of An Experimental Solid Rocket Motor, Johnathan Bettes, Andrew Fuller
Williams Honors College, Honors Research Projects
This project utilizes mechanical and chemical principles to characterize propellant grains and to manufacture a custom nozzle to create experimental Solid Rocket Motors (SRMs) with a propellant called Angry Listerine. For the propellant grains, one major non-chemical factor that determines its thrust performance is the grain geometry, or the core of the grains for which hot gases flow through the propellant and out of the nozzle to further react with exposed chemical surfaces. The two kinds of grain geometries analyzed and tested in this report are called MoonBurner, an offset circular core, and Finocyl, a gear-shaped core. The nozzle for …
Construction Composites Of Recycled Pvc And Recycled Polyolefins, Natalie Prusovic
Construction Composites Of Recycled Pvc And Recycled Polyolefins, Natalie Prusovic
Williams Honors College, Honors Research Projects
Current construction composites are typically only composed of polyvinyl chloride (PVC) and recycled PVC (rPVC). This proposed project will investigate if recycled polyethylene (rPE) and polypropylene (rPP) can be used instead of PVC in those materials. Different compositions of rPE, rPP, and rPVC blends will be compounded and a T-peel test will be performed to test the adhesion.
Exploring Natural Raw Materials For The Development Of Hot Melt Adhesives For Linings Of Paintings, Erica Factor
Exploring Natural Raw Materials For The Development Of Hot Melt Adhesives For Linings Of Paintings, Erica Factor
Williams Honors College, Honors Research Projects
Natural raw materials will be explored for developing hot melt adhesives for the lining of paintings. The leading raw material is a natural resin called "Damar". This resin is obtained from the tree family Dipterocaupocea in India and Southeast Asia. This material has shown promising results from initial testing. Damar, with the potential for other natural raw materials, will be combined with synthetic ingredients to create sustainable formulations. The formulations will be tested on linen to replicate the application onto paintings. The sustainability, tackiness, texture, and overall performance of each formula will be considered. Once a formulation has been selected, …
Removal Of Residual Stress In 3d Printed Polymers, Christian Jenkins
Removal Of Residual Stress In 3d Printed Polymers, Christian Jenkins
Williams Honors College, Honors Research Projects
This project aims to investigate the relationship between stress relaxation and the reduction of dimensional shrinkage and warping in 3D printed polymers produced through fused filament fabrication. The hypothesis suggests that residual stress in 3D printed structures results from factors such as temperature differences, molecular-level contributions, and rapid cooling, causing post-printing warpage and damage. To mitigate these issues, the project proposes annealing 3D printed polymers in a hot sandbath to allow stress relaxation without warping. The study will employ a Dynamic Mechanical Analysis (DMA) machine to assess mechanical properties of relaxed and unrelaxed samples, comparing their effectiveness. The project's timeline …
Aggregation-Induced Emission Probe For Alzheimer's Detection And Treatment Screening, Gemini Ramlo
Aggregation-Induced Emission Probe For Alzheimer's Detection And Treatment Screening, Gemini Ramlo
Williams Honors College, Honors Research Projects
The proposed project is to research if ROF-2, an aggregation-induced emitter, can be used to screen medications for Alzheimer's Disease and to accurately detect this disease, along with its progression. This will be done through multiple incubation periods using different identifiers that have already been solidified within Alzheimer's research to prove its ability and accuracy within screening and detection regarding this disease.
Geochemical Assessment Of Mineral Sequestration Of Carbon Dioxide In The Midcontinent Rift, Alsedik Abousif, David J. Wronkiewicz, Abdelmoniem Masoud
Geochemical Assessment Of Mineral Sequestration Of Carbon Dioxide In The Midcontinent Rift, Alsedik Abousif, David J. Wronkiewicz, Abdelmoniem Masoud
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
This Study Examines The Potential Of Midcontinent Rift Rocks To Facilitate Long-Term CO2 Sequestration By Providing The Necessary Ca And Mg For Carbonate Mineralization. Surface Samples Were Collected From The Oronto And Bayfield-Jacobsville Groups Around Lake Superior And Used For Petrography And X-Ray Diffraction To Determine Their Mineral Composition. Also, X-Ray Fluorescence Was Also Used To Assess Their Bulk Chemical Composition. The Samples Were Then Exposed To CO2 And Deionized Water In Teflon-Lined Vessels At 90°C, And The Resulting Leachate Fluids Were Analyzed For The Cation Released During The Testing. SEM Microscopy Was Used To Examine The Samples For Potential …
Prediction Of Surfactant Performance From Surfactant Huff-Puff In Carbonate Reservoirs Using A Data-Driven Approach And Desktop Application Development, Y. Yao, Mingzhen Wei, Y. Cui, M. Ali, J. Leng, Y. Qiu
Prediction Of Surfactant Performance From Surfactant Huff-Puff In Carbonate Reservoirs Using A Data-Driven Approach And Desktop Application Development, Y. Yao, Mingzhen Wei, Y. Cui, M. Ali, J. Leng, Y. Qiu
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Surfactants have been widely used to alter the wettability of carbonate rocks from oil-wetness to water-wetness and enhanced oil recovery. One of primary methods implemented in filed applications for enhanced oil recovery is surfactant huff-puff. Currently, a large number of surfactant treatments are conducted in laboratories prior to field applications to optimize the design of surfactant huff-puff, test the performance of surfactants, and minimize failure risk. This process is time-consuming since a treatment could last from several days to more than 300 days. Moreover, a fraction of treatments could not improve oil recovery as reported in the literature. In this …
Pattern Recognition For Wettability Alteration With Surfactants In Carbonate Reservoirs By Using Machine Learning, Y. Yao, Mingzhen Wei, M. Ali, Y. Qiu, Y. Cui, J. Leng
Pattern Recognition For Wettability Alteration With Surfactants In Carbonate Reservoirs By Using Machine Learning, Y. Yao, Mingzhen Wei, M. Ali, Y. Qiu, Y. Cui, J. Leng
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Surfactants Are Widely Applied Agents to Interact with the Adsorbates on Carbonate Rock Surface, Which Could Alter Wettability from Oil-Wetness to Water-Wetness and Thus Enhance Oil Recovery. Surfactant Huff-Puff is Often Conducted to Achieve Wettability Alteration and Has Been Applied under Various Conditions. Currently, Many Investigations Have Been Reported to Apply Conventional Data Analysis Methods to Analyze Different Sets of Surfactant Huff-Puff Projects. Yet the Application of Machine Learning Algorithms to Reveal the Inherent Patterns is Rarely Reported. in This Study, We Integrate Principal Component Analysis (PCA) with Hierarchical Clustering Algorithm (HCA) to Uncover the Hidden Patterns Embedded in Global …
Improving Insar Accuracy For Slow Deformation And Change Detection With Lidar And Gps, Yusupujiang Aimaiti, Vasit Sagan, Cagri Gul, Jeremy Maurer, Jackson D. Cothren, Carla Klehm, Elizabeth A. Koenig, Nathan Scott
Improving Insar Accuracy For Slow Deformation And Change Detection With Lidar And Gps, Yusupujiang Aimaiti, Vasit Sagan, Cagri Gul, Jeremy Maurer, Jackson D. Cothren, Carla Klehm, Elizabeth A. Koenig, Nathan Scott
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Interferometric Synthetic Aperture Radar (InSAR) uses two or more SAR images over the same region for mapping ground surface displacements through time. InSAR displacements are relative to a reference point due to the 2π phase ambiguity that from unwrapping, and as a result ground control points (GCPs) are often used to calibrate the displacement model and obtain absolute measurements. Errors in InSAR time-series are typically measured with respect to the reference point, but absolute errors are not currently well constrained. To develop absolute error models for InSAR, we generate Sentinel-1 InSAR time-series for Belleville, Illinois and compare time-series with Global …
Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman
Novel Re-Crosslinkable Preformed Particle Gels (Rppg) For Parent- And Infill-Well-Fracture Interactions Mitigation, Xiaojing Ge, Adel Alotibi, Ahmed Al-Hlaichi, Yanbo Liu, Tao Song, Junchen Liu, Baojun Bai, Thomas P. Schuman
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Hydraulic fracturing treatments in unconventional infill (or "child") wells can be significantly affected by depletion from existing parent-well, resulting in asymmetrical fracture growth. These issues may lead to excessive load-water production, proppant deposition, casing deformation in the parent well, and unbalanced stimulation of infill wells. To mitigate these effects, various strategies have been proposed, including the use of far-field diverters in child wells and repressurization of parent wells. Additionally, an increasingly popular strategy involves injecting near-wellbore diverters to temporarily plug entry points into the parent wellbores during frac operations on infill wells. To achieve better application, a novel low-cost, self-degradable, …
Experimental Study: Evaluating The Effect Of Low High Viscosity Friction Reducer Concentrations To Transport Proppant Across Static And Dynamic Models, Ghith Biheri, Abdulmohsin Imqam, Shari Dunn-Norman, Khaled Elmaleh
Experimental Study: Evaluating The Effect Of Low High Viscosity Friction Reducer Concentrations To Transport Proppant Across Static And Dynamic Models, Ghith Biheri, Abdulmohsin Imqam, Shari Dunn-Norman, Khaled Elmaleh
Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works
Hydraulic fracturing treatments may significantly improve the oil production from wells in unconventional reservoirs by enhancing the fracture conductivities. Fracture conductivity can be improved by efficiently transporting and distributing the proppant through the lengths of the fractures. The main target of this study is to evaluate the viscosity and elasticity of high viscosity friction reducer (HVFR) for the purpose of transport and suspend the proppant at a temperature of 25°C. This study an alyzes the settling of proppant across HVFR using two different concentrations, 0.5 and 1 gallon per thousand of gallon (gpt). The tests were conducted using two static …
A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han
A Review Of Dielectric Barrier Discharge Cold Atmospheric Plasma For Surface Sterilization And Decontamination, Kolawole Adesina, Ta Chun Lin, Yue-Wern Huang, Marek Locmelis, Daoru Frank Han
Biological Sciences Faculty Research & Creative Works
Numerous investigations have shown that non-equilibrium discharges at atmospheric pressure, also known as "cold atmospheric plasma" (CAP) are efficient to remove biological contaminants from surfaces of a variety of materials. Recently, CAP has quickly advanced as a technique for microbial cleaning, wound healing, and cancer therapy due to the chemical and biologically active radicals it produces, known collectively as reactive oxygen and nitrogen species (RONS). This article reviews studies pertaining to one of the atmospheric plasma sources known as Dielectric Barrier Discharge (DBD) which has been widely used to treat materials with microbes for sterilization, disinfection, and decontamination purposes. To …
Flow Regimes In Bubble Columns With And Without Internals: A Review, Ayat N. Mahmood, Amer A. Abdulrahman, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Muthanna H. Al-Dahhan
Flow Regimes In Bubble Columns With And Without Internals: A Review, Ayat N. Mahmood, Amer A. Abdulrahman, Laith S. Sabri, Abbas J. Sultan, Hasan Shakir Majdi, Muthanna H. Al-Dahhan
Chemical and Biochemical Engineering Faculty Research & Creative Works
Hydrodynamics characterization in terms of flow regime behavior is a crucial task to enhance the design of bubble column reactors and scaling up related methodologies. This review presents recent studies on the typical flow regimes established in bubble columns. Some effort is also provided to introduce relevant definitions pertaining to this field, namely, that of "void fraction" and related (local, chordal, cross-sectional and volumetric) variants. Experimental studies involving different parameters that affect design and operating conditions are also discussed in detail. In the second part of the review, the attention is shifted to cases with internals of various types (perforated …
Thermal Decomposition And Kinetic Parameters Of Three Biomass Feedstocks For The Performance Of The Gasification Process Using A Thermogravimetric Analyzer, Rania Almusafir, Joseph D. Smith
Thermal Decomposition And Kinetic Parameters Of Three Biomass Feedstocks For The Performance Of The Gasification Process Using A Thermogravimetric Analyzer, Rania Almusafir, Joseph D. Smith
Chemical and Biochemical Engineering Faculty Research & Creative Works
Thermogravimetric analysis (TGA) is a powerful technique and useful method for characterizing biomass as a non-conventional fuel. A TGA apparatus has been utilized to experimentally investigate the impact of biomass feedstock diversity on the performance of the gasification of hardwood (HW), softwood (SW) pellets, and refuse-derived fuel (RDF) materials. The solid conversion rate and the volatile species formation rate have been estimated to quantify the rates of devolatilization for each material. In addition, the combustion kinetic characteristics of the three biomass feedstocks were investigated using TGA at different heating rates, and a thermal kinetic analysis was conducted to describe the …
Gas-Phase Adsorption Of Dimethyl Methylphosphonate Over Ce(Oh)4@Pim-1 Composites Prepared Via Matrix Incorporation And Surface Coating Methods, Sukanta K. Mondal, Peter O. Aina, Ali A. Rownaghi, Fateme Rezaei
Gas-Phase Adsorption Of Dimethyl Methylphosphonate Over Ce(Oh)4@Pim-1 Composites Prepared Via Matrix Incorporation And Surface Coating Methods, Sukanta K. Mondal, Peter O. Aina, Ali A. Rownaghi, Fateme Rezaei
Chemical and Biochemical Engineering Faculty Research & Creative Works
This Study Investigated the Potential of Polymer of Intrinsic Microporosity (PIM-1) and Ce(OH)4@PIM-1 Composites for Adsorption of the Nerve Agent Simulant, Dimethyl Methylphosphonate (DMMP). through Experimental Investigations It Was Demonstrated that These Composite Adsorbents Exhibit Excellent Gas-Phase DMMP Adsorption Performance, with High Uptake Capacities and Relatively Fast Kinetics. This Study Further Examined the Effect of Two Composite's Preparation Methods, Namely Matrix Incorporation and Surface Coating, on the DMMP Adsorption Performance of Ce(OH)4@PIM-1. the Results Revealed that Coating of Ce(OH)4 on the PIM-1 Surface Gives Rise to Faster Adsorption Kinetics Than its Incorporation into the Polymer Matrix at Fixed 30 Wt …
Liposomes-Encapsulating Double-Stranded Nucleic Acid (Poly I:C) For Head And Neck Cancer Treatment, Vidit Singh, Anna Chernatynskaya, Lin Qi, Hsin Yin Chuang, Tristan Cole, Vimalin Mani Jeyalatha, Lavanya Bhargava, W. Andrew Yeudall, Laszlo Farkas, Hu Yang
Liposomes-Encapsulating Double-Stranded Nucleic Acid (Poly I:C) For Head And Neck Cancer Treatment, Vidit Singh, Anna Chernatynskaya, Lin Qi, Hsin Yin Chuang, Tristan Cole, Vimalin Mani Jeyalatha, Lavanya Bhargava, W. Andrew Yeudall, Laszlo Farkas, Hu Yang
Chemical and Biochemical Engineering Faculty Research & Creative Works
Polyriboinosinic acid-polyribocytidylic acid (Poly I:C) serves as a synthetic mimic of viral double-stranded dsRNA, capable of inducing apoptosis in numerous cancer cells. Despite its potential, therapeutic benefits, the application of Poly I:C has been hindered by concerns regarding toxicity, stability, enzymatic degradation, and undue immune stimulation, leading to autoimmune disorders. To address these challenges, encapsulation of antitumor drugs within delivery systems such as cationic liposomes is often employed to enhance their efficacy while minimizing dosages. In this study, we investigated the potential of cationic liposomes to deliver Poly I:C into the Head and Neck 12 (HN12) cell line to induce …
Novel Modified Polyethersulfone High Temperature And Low Humidity Fuel Cell Membrane: Experimental And Simulation Study, Mohammed K. Al Mesfer, Muthanna H. Al-Dahhan, Mohd Danish, Mumtaj Shah
Novel Modified Polyethersulfone High Temperature And Low Humidity Fuel Cell Membrane: Experimental And Simulation Study, Mohammed K. Al Mesfer, Muthanna H. Al-Dahhan, Mohd Danish, Mumtaj Shah
Chemical and Biochemical Engineering Faculty Research & Creative Works
The Present Study Focuses on Synthesizing a High-Temperature Stable Membrane Working under Low Relative Humidity (RH) by Aminating the Traditional Polyethersulfone Polymer with Aniline for Fuel Cell Applications. a Condensed-Phase Optimized Molecular Potentials for Atomistic Simulation Studies Force Field-Based Molecular Dynamics Simulation Was Used to Explore the Microscopic Properties and Transport of Water and Hydronium (H3O+) Ions Across the Electrolyte at Varied Temperatures and RHs. COMSOL Calculates Oxygen and Hydrogen Concentrations after Examining the Polymer–ion Interaction with the Radial Distribution Function (RDF). the High H3O+ Diffusion Coefficient of the Aniline-Treated Membrane Shows the Benefit of the Modification. the RDF Confirmed …
Robust Triso-Fueled Pebble Identification By Digit Recognition, Roshan Kenia, Jihane Mendil, Ahmed Jasim, Muthanna Al-Dahhan, Zhaozheng Yin
Robust Triso-Fueled Pebble Identification By Digit Recognition, Roshan Kenia, Jihane Mendil, Ahmed Jasim, Muthanna Al-Dahhan, Zhaozheng Yin
Chemical and Biochemical Engineering Faculty Research & Creative Works
Nuclear Power Plays a Vital Role in Providing Reliable and Clean Energy to Fulfill Increasing Demands in Electricity Worldwide. It Continues to Be an Essential Source of National Power Supply as Growing Concerns About Fossil Fuel Depletion, Global Warming, and Emissions Require Utilizing Sustainable Energy Sources. One Area Contributing to the Growth of Nuclear Power is the Development of Reactors that Have Enhanced Protection and Security, Thermal Efficiency, and Design. Reactor Efficiency Can Be Studied by the Burnup that Occurs When a TRISO-Fueled Pebble is Inserted into the Nuclear Core and Subsequently Removed. the Levels of Burnup Are Measured based …
Molecular Imaging Nanoprobes And Their Applications In Atherosclerosis Diagnosis, Huari Kou, Hu Yang
Molecular Imaging Nanoprobes And Their Applications In Atherosclerosis Diagnosis, Huari Kou, Hu Yang
Chemical and Biochemical Engineering Faculty Research & Creative Works
Molecular imaging has undergone significant development in recent years for its excellent ability to image and quantify biologic processes at cellular and molecular levels. Its application is of significance in cardiovascular diseases, particularly in diagnosing them at early stages. Atherosclerosis is a complex, chronic, and progressive disease that can lead to serious consequences such as heart strokes or infarctions. Attempts have been made to detect atherosclerosis with molecular imaging modalities. Not only do imaging modalities develop rapidly, but research of relevant nanomaterials as imaging probes has also been increasingly studied in recent years. This review focuses on the latest developments …
Injectable Dendrimer Hydrogel Delivers Melphalan In Both Conjugated And Free Forms For Retinoblastoma, Remy C. Cooper, Juan Wang, Hu Yang
Injectable Dendrimer Hydrogel Delivers Melphalan In Both Conjugated And Free Forms For Retinoblastoma, Remy C. Cooper, Juan Wang, Hu Yang
Chemical and Biochemical Engineering Faculty Research & Creative Works
We report the successful synthesis of an injectable dendrimer hydrogel (DH) carrying melphalan, a clinical drug for retinoblastoma treatment, in both conjugated and free forms. Polyamidoamine (PAMAM) dendrimer generation 5 (G5) is surface-modified with an acid-sensitive acetal-dibenzocyclooctyne linker and then undergoes azide-alkyne cycloaddition with melphalan-PEG-N3 conjugate to form G5-acetal-melphalan. During the DH gelation between G5-acetal-melphalan and PEG-diacrylate, free melphalan is added, resulting in a hydrogel (G5-acetal-melphalan-DH/melphalan) that carries the drug in both conjugated and free forms. Melphalan is slowly released from G5-acetal-melphalan-DH/melphalan, with the conjugated melphalan released more quickly at pH 5.3 due to acid-triggered acetal bond cleavage. The formulation's …
Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han
Magnetic Separation Of Lunar Regolith Simulants With Applications To In Situ Resource Utilization On The Moon, Peter Bachle, Jeffrey Smith, Fateme Rezaei, David Bayless, William Schonberg, Daoru Han
Chemical and Biochemical Engineering Faculty Research & Creative Works
The development of in situ resource utilization (ISRU) for metal extraction is imperative as a steppingstone for habitation construction in lunar and non-terrestrial environments. Separation of minerals by chemical composition is important to optimize metal and oxygen liberation from lunar ore. To this effect, devices capable of separating aluminum bearing minerals from iron-bearing minerals from the lunar regolith simulants have been developed. Twenty-eight different simulants have been used in this study. A dual-belt separator was designed to reduce middling. Para-magnetic minerals were reliably separated using a neodymium N52-magnet-separator system. Effective separation of aluminum-bearing minerals from iron-bearing minerals was greater than …
Thermal Management Of Adsorption-Based Biogas Upgrading Systems Via Incorporation Of Phase-Change Materials, Kyle Newport, Khaled Baamran, Ali A. Rownaghi, Fateme Rezaei
Thermal Management Of Adsorption-Based Biogas Upgrading Systems Via Incorporation Of Phase-Change Materials, Kyle Newport, Khaled Baamran, Ali A. Rownaghi, Fateme Rezaei
Chemical and Biochemical Engineering Faculty Research & Creative Works
Thermal management of adsorption columns is necessary to maintain their effectiveness while reducing the energy requirements of the overall separation process. In this work, we aimed at investigating the suitability of blending adsorbents with phase-change materials (PCMs) to adjust the thermal profile of a biogas upgrading column. A commercially available PCM (Nextek 28D) in quantities of 10, 20, and 30 wt. % was blended with zeolite 13X in two configurations, namely, traditional pellets and 3D-printed monoliths. The use of different structures allows for better analysis of thermal profiles and assessment of the effectiveness of the PCM in a packed bed …
Transitioning To A Lower Global Warming Refrigerant, A Performance Study Of R-513a And Hfc-134a In Commercial Chillers, Hossein Abedsoltan, Mark B. Shiflett
Transitioning To A Lower Global Warming Refrigerant, A Performance Study Of R-513a And Hfc-134a In Commercial Chillers, Hossein Abedsoltan, Mark B. Shiflett
Chemical and Biochemical Engineering Faculty Research & Creative Works
The performance of R-513A and HFC-134a refrigerants is compared in two identical chillers operating at the University of Kansas. R-513A is a more environmentally friendly refrigerant due to its lower global warming potential that can be used as a retrofit replacement for HFC-134a in chillers. This study investigates the performance comparison of transitioning from HFC-134a to R-513A. The chillers have been in operation for two years, and cooling capacity, coefficient of performance, and other operating parameters are compared under similar cooling conditions. Cooling capacities ranged from 100 to 500 kW for both chillers. Overall, the energy consumption and coefficient of …
Fit-For-Purpose Heavy-Duty Fishing Equipment Designed To Safely Retrieve A Damaged Wireline Cable From An Active, Sour Gas Well Located Offshore, M. N. Amri, R. Macaulay, S. Aboelnaga, A. Abouganem, M. Al Dahhan
Fit-For-Purpose Heavy-Duty Fishing Equipment Designed To Safely Retrieve A Damaged Wireline Cable From An Active, Sour Gas Well Located Offshore, M. N. Amri, R. Macaulay, S. Aboelnaga, A. Abouganem, M. Al Dahhan
Chemical and Biochemical Engineering Faculty Research & Creative Works
Wireline operations play a crucial role in the oil and gas industry, facilitating essential tasks like well maintenance, data collection, and intervention. These operations involve deploying substantial downhole tools and large cables into the wellbore, but this endeavor is not without its challenges. Particularly, when a wireline cable breaks downhole, it poses significant risks. Unplanned wireline breakages result in demanding heavy-duty fishing operations when they occur in challenging offshore environments and unfavorable downhole conditions. in this work, strategic planning and execution were applied in a complex e-line cable recovery in a live, sour gas well without the need for well …
Integrated Downhole-Measurement-Enabled Coiled Tubing And Mechanical Wireline Recovery Of E-Line Cable In A Live, Sour Gas Well, C. Villagrana, A. Abouganem, A. M. Afsal, M. Al-Dahhan, J. Delaune, W. R. Tapia, M. Amri
Integrated Downhole-Measurement-Enabled Coiled Tubing And Mechanical Wireline Recovery Of E-Line Cable In A Live, Sour Gas Well, C. Villagrana, A. Abouganem, A. M. Afsal, M. Al-Dahhan, J. Delaune, W. R. Tapia, M. Amri
Chemical and Biochemical Engineering Faculty Research & Creative Works
This study details a complex wire recovery operation in a live well that involved transitioning from coiled tubing (CT) to mechanical wireline (MWL), in both slickline [MA1] or braided line, to retrieve the wire in good condition and later hand it over to an electrical wireline (e-line) unit to spool it onto a drum. the operation was carried out on a live, sour gas well, demanding a unique setup and emphasizing safety. Two successful recovery operations removed a significant amount of e-line left in the well plus the upper section of the e-line bottomhole assembly (BHA) while safely pushing the …
Gan Hemt And Air Core Magnetics Based Power Converters Evaluations At Cryogenic Temperature, Yuqi Wei, Md Maksudul Hossain, H. Alan Mantooth
Gan Hemt And Air Core Magnetics Based Power Converters Evaluations At Cryogenic Temperature, Yuqi Wei, Md Maksudul Hossain, H. Alan Mantooth
Electrical Engineering Faculty Publications and Presentations
Cryogenic power electronics is both advantageous and indispensable in many applications, like deep space probe, military electric vehicle, magnetic resonance imaging etc. Among different semiconductors, the gallium nitride (GaN) high electron mobility transistor (HEMT) is the most promising candidate for cryogenic applications with significant conduction loss and switching loss reductions. Moreover, there is no carrier freeze out effect for the GaN HEMTs, which is applicable in extreme low temperature operating conditions. In this work, the efficiency of GaN HEMTs based power converters with different power levels (from several Watts to several kiloWatts) are evaluated at cryogenic temperature. Three different commercial …