Chemical Engineering Commons^™

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas Schuman

Chemical and Biochemical Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. in this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. a dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

Transport Phenomena With Reactions In Drug Delivery: Towards A Quantitative Description, Xianjie Qiu, Parthasakha Neogi

Chemical and Biochemical Engineering Faculty Research & Creative Works

A Distributed System Called a Krogh Cylinder is Used Here to Quantify the Transport of a Solute from the Capillary into the Extravascular Tissue. the Capillary Network is Broken Down into Cylindrical Cells, Each Containing a Capillary and an Appropriate Amount of Extravascular Tissue. the Flow in the Cylinder Model Has Two-Dimensional Velocities, Which Are in the Axial and Radial Directions. All Parameters of the System, together with the Geometric Ones, Have Been Included in the Model. for a Given Bioavailability, the Uptakes of Reactive and Nonreactive Solutes Have Been Obtained. Very Large or Massive Molecules Have Been Considered. the …

Dual Crosslinked Poly(Acrylamide-Co-N-Vinylpyrrolidone) Microspheres With Re-Crosslinking Ability For Fossil Energy Recovery, Jingyang Pu, Baojun Bai, Jiaming Geng, Na Zhang, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Microspheres have been proposed to be applied in controlling wastewater production for mature oilfields and migrating leakage for gas and nuclear waste storage. However, it remains challenging for stacked microspheres to maintain strong blocking ability in micron-sized small pores or fractures. In this study, a novel microsphere was developed with comprehensive properties including high deformability and long re-crosslinking time upon tunable swelling ratio for the applications. A dual covalent and physical crosslinking strategy was used to develop novel microspheres reinforced by a hydrogen bond (H-bond, between pyrrole ring and amide group) and coordination bond (between chromium acetate (CrAc) and carboxyl …

A Molecular Dynamics Study Of Structural Modifications Of Perarylphosphonium Based Ionic Liquids On The Melting Point, Johnathan Anderson

Graduate Theses and Dissertations (2019 - present)

Several perarylphosphonium based mesothermal ionic liquids (ILs) have been shown to be stable at high temperatures for prolonged periods of time and with high heat capacities making them good candidates for use in many processes such as usage as a heat transfer fluid, as an absorbent for separation of aromatics from aliphatics, and as a solvent for high temperature reactions. Many, however, have melting points above 100^o C, limiting their use. Recently, it was shown that the melting point of an IL can be lowered by simply increasing the dipole moment of the cation or by structurally rigidifying the …

Measuring Plume Concentration Variations Under Neutral Atmospheric Conditions, Daniel Williams

Chemical Engineering Undergraduate Honors Theses

Hazardous gases are increasingly becoming a large safety concern as the world continues to grow and industrialize. The modeling of when hazardous gases breach containment is an extremely important objective of consequence assessment planning and response. To improve the understanding of the variability inherent in passive gas releases, a test program to demonstrate the variability of gas concentration measurements at different location in a passive gas plume released from an area source in the ultra-low speed wind tunnel at the Chemical Hazards Research Center. A Flame Ionization Detector was used to measure the concentration of the source cloud. Methane was …

Lignin Copolymer Property Prediction Using Machine Learning, Collin Larsen

Chemical Engineering Undergraduate Honors Theses

Lignin, an abundant biopolymer, is a waste byproduct of the paper and pulp industry. Despite its renewable nature and potential applicability in various products, such as plastics and composites, the development of lignin-based materials has been impeded by the cumbersome, Edisonian process of trial and error. This research proposes a novel approach to forecasting the properties of lignin-based copolymers by utilizing a recurrent neural network (RNN) based on the Keras models previously created by Tao et al. Example units of modified lignin were synthesized via esterification and amination functional group modifications. To increase the efficiency and accuracy of the prediction …

Estimating Toxic Load From Finite-Duration Contaminant Releases In Wind Tunnel Experiments, Patrick B. Jones

Chemical Engineering Undergraduate Honors Theses

When gaseous contaminants are released into the atmosphere said contaminants form clouds that travel in the prevailing wind direction. An individual caught in the downwind path of one such cloud will accumulate a dosage, or toxic load, of said contaminant that is dependent on a multitude of environmental factors. This thesis quantifies unpredictability – or variation – in toxic load measurements using downwind concentration data captured from finite-duration gaseous contaminant releases conducted at set conditions in the Chemical Hazards Research Center ultra-low speed wind tunnel.

Finite-duration releases can be divided into two categories – time-limited steady releases and puffs – …

Greenhouse Gas Emissions From Milk Production In The Us, Cailey Cooper

Chemical Engineering Undergraduate Honors Theses

Life cycle assessment is performed to determine the environmental impacts of the life cycle of a product. In this study, the greenhouse gas emissions from milk production in the United States were calculated using a cradle-to-gate analysis. The dairy industry has a noticeable impact on the total greenhouse gas emissions in the US. Performing life cycle assessment provides information about the main emission sources in the life cycle which can spark innovative changes to reduce these emissions. The life cycle assessment was performed using the openLCA software and ReCiPe impact assessment methodology. The results indicated that 1.28 kg of carbon …

Heat Transfer From Plates, Leanza Trevino

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This is a continuation of work done by Alexa Moreno. She created an experiment to model free convection of a horizontal plate. In this report, free and forced convection of a vertical and horizontal plate, respectively are modeled. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Lab handouts are included in the Appendix.

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Utilization Of Electrodeionization To Separate And Concentrate Cellobionic And Gluconic Acid, Andie Veeder

Chemical Engineering Undergraduate Honors Theses

Biofuel production is currently an expensive and inefficient process with many drawbacks. It is water and land intensive, competes with food production, and requires large energy inputs decreasing its relative sustainability. This paper explores the use of electrodeionization (EDI) to improve the biofuel process by separating and concentrating large, organic sugar acids that are important materials for the production of bioethanol. An EDI device was assembled for the purpose of separating and concentrating gluconic, cellobionic and lactobionic acid. Several trials were conducted and samples were analyzed to determine the success of this experiment. The results for the separation and concentration …

Comparing Firocoxib And Meloxicam In The Application Of Microneedle Patch For Transdermal Drug Delivery, Ruohan Li

Chemical Engineering Undergraduate Honors Theses

This thesis compares the performance of meloxicam and firocoxib in the aspects of its physical characteristic, chemical compositions, and in-vitro performances for transdermal pain management microneedle patches on farm animals. The microneedle patches are composed of polyvinyl alcohol (PVA), type I collagen (COL), and chitosan (CHI) as base material that carries NSAIDs to achieve therapeutic purposes. Scanning electron microscopy (SEM) was utilized to observe the morphological and physical characteristics of the microneedle patches. Both meloxicam and firocoxib microneedle patches were successfully prepared using the methodology, with organized microneedle distribution and sizing. And Fourier transform infrared spectroscopy (FTIR) confirmed the chemical …

A Teaching Unit Plan For Introducing Engineering In 1st-2nd Grade Classrooms, Claudia Smith

Chemical Engineering Undergraduate Honors Theses

The field of engineering, and specifically chemical engineering, is projected to increase significantly over the next 10 years. Engineering programs require students to have a strong foundation of math and science. Students in the United States are often underprepared to enter these programs, and the majority of high school students are not interested in pursuing a career in the STEM field at all. For this project, a unit teaching plan was created to introduce students to the field of engineering, providing a foundation for their upper-level STEM classes, and encouraging them to consider engineering as a career in the future. …

Response Of Cell Nuclei To Mechanical Strain In Synthetic Liquid Crystals, Sydnee Ehorn

Chemical Engineering Undergraduate Honors Theses

In this research project, induced mechanical stress on the cell nucleus via synthetic liquid crystals (LCs) was explored. Points of interest were the shape alterations and distortions of the nuclear envelope under strain, providing insight into the mechanics and stiffness of the cell nuclei. LCs are substances with structure and fluidity, and LCs in the nematic phase are aligned in a single direction without layers, inducing shear stress on inclusions. This study confirmed that an aqueous solution of 17.3 wt% disodium cromoglycate (DSCG) can successfully strain the nuclei of chicken red blood cells (RBCs) by examining the nuclear response to …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Tangential Flow Treatment Of Poultry Processing Wastewater Using Stainless Steel Ultrafiltration Membrane, Saubana Olorunsola Dada

Graduate Theses and Dissertations

The current treatment of poultry processing wastewater (PPW) requires a large expanse of land, takes time, and requires chemical usage. The wastewater is typically treated prior to discharge. Apart from aiming to reuse the treated water for non-potable activities, this project aimed to reduce the footprint and time required for PPW treatment. To intensify the PPW treatment units, we studied the possibility of replacing dissolved air floatation (DAF) with a stainless steel ultrafiltration membrane (SSUF). Combined PPW from all processing units taken before the first DAF and the second DAF were used for this study with no pretreatment. The SSUF …

Characterization Of Lignin And Cellulose Biopolymers Structure – Function Relationships, Zachariah Pittman

All Dissertations

Biomass is vital to ongoing efforts to secure a sustainable future. While many of our efforts focus on finding alternative forms of energy, biomass among them, only biomass has the potential to serve as a sustainable materials feedstock. However, biomass is heterogenous, complicating the upgrading processes needed to manufacture commodity and performance products. For example, plant biomass consists largely of cellulose, a crystalline polysaccharide, and lignin, a highly stable polyaromatic. The specific properties of cellulose and lignin depend greatly on the plant, harvesting conditions, and isolation procedures. Thus, accurate and reliable determination of the fundamental properties of biomass is crucial …

Fluorescence Multiplexing With Combination Probes For Biological And Diagnostic Applications, Madeline Mccarthy

All Dissertations

Cancer refers to a group of diseases containing more than 200 different subtypes. Cancer is a heterogeneous disease by nature, meaning that there are differences among tumors of the same type in different patients, and there are differences among cancer cells within a single tumor of one patient. Since cancer is not a single disease, nor does it have a single cause, it proves to be incredibly hard to diagnose and treat. The ability to study cellular markers, cell and tissue spatial arrangement, and gene function are all integral parts of cancer diagnostic and treatment efforts.

Here, I first present …

Compositional Engineering Of Precursor Inks For Intense Pulsed Light Compatible Deposition Of Perovskite Solar Cells., Blake Martin

Electronic Theses and Dissertations

Perovskite solar cell (PSC) technology offers a promising alternative to silicon-based photovoltaics (PVs), but challenges of stability, module efficiency, and scalability hinder commercialization. This study aims to explore potential solutions to overcome scalability and cost limitations of PSCs, addressing technical barriers to commercialization. We adapt the conventional three-stage perovskite deposition process (deposition, translational phase formation, and annealing) for scalable platforms using wide-area depositions, meniscus coating methods, forced laminar airflow drying, and radiative annealing methods, making it more suitable for roll-to-roll fabrication. A technoeconomic analysis shows that large-scale operations can produce solar films at a cost of $0.04-$0.10 per watt, making …

The Study Of Corrosion On Additive-Manufactured Metals., Braydan Daniels

Electronic Theses and Dissertations

The purpose of this study was to investigate and compare the corrosion mechanisms between wrought and additive-manufactured (3D-printed) copper and stainless steel. The experimental procedure consisted of measuring the open circuit potential, electrochemical impedance spectroscopy, linear sweep voltammetry, Tafel analysis, surface topology, and scanning electron microscopy for each metal within salt water, tap water, sulfuric acid, and synthetic body fluid (excluding copper in synthetic body fluid).

Overall, printed stainless steel was more corrosion-resistant than wrought stainless steel in tap water and synthetic body fluid based on OCP, LSV, and surface topology results. Additionally, printed copper was more corrosion-resistant than wrought …

Polymeric Biomaterials Approaches For Engineering The In Vitro Cellular Microenvironment For Mscs, Mahsa Letter-Mahsa Haseli

Graduate Theses and Dissertations

Cell therapy is a technology that relies on replacing diseased or dysfunctional cells with healthy functioning ones. One of the cells used for such advanced therapies are stem cells, owing to their ability to differentiate into specific cells required for repairing damaged or defective tissues or cells. The majority of cell-based products are intended to transiently persist in the patient, secreting factors which then allow the patient’s body to heal; in these products, the cells are subsequently eliminated from the body. Furthermore, unique manufacturing platforms, in addition to novel commercialization strategies, will be required to create a successful, sustainable cell …

Electrodialysis Process For The Simultaneous Treatment Of Reject Brine And Capture Of Carbon Dioxide, Jawad Mustafa

Dissertations

Desalination plants are highly efficient in producing desalinated water for potable applications. However, the process also generates reject brine, which is highly concentrated saline water. In order to produce 1 liter of potable water using desalination, approximately 1.5 liters of reject brine is generated. The disposal of reject brine presents a significant challenge for the desalination industry. Typically, this waste product is discharged into the sea, causing environmental damage, and polluting marine life. Moreover, certain countries heavily rely on desalination to meet their potable water needs, which results in the emission of greenhouse gases. As desalination plants consume a significant …

Catalytical Performance Of Heteroatom Doped And Undoped Carbon-Based Materials, Jahangir Alom, Md Saif Hasan, Md Asaduzaman, Mohammad Taufiq Alam, Dalel Belhaj, Raja Selvaraj, Md Ashraf Hossain, Masoumeh Zargar, Mohammad Boshir Ahmed

Research outputs 2022 to 2026

Developing cost-effective, eco-friendly, efficient, stable, and unique catalytic systems remains a crucial issue in catalysis. Due to their superior physicochemical and electrochemical properties, exceptional structural characteristics, environmental friendliness, economic productivity, minimal energy demand, and abundant supply, a significant amount of research has been devoted to the development of various doped carbon materials as efficient catalysts. In addition, carbon-based materials (CBMs) with specified doping have lately become significant members of the carbon group, showing promise for a broad range of uses (e.g., catalysis, environmental remediation, critical chemical production, and energy conversion and storage). This study will, therefore, pay attention to the …

Investigation Of Light Management Strategies And Photochemistry Of Si/Tio2 Tandem Microwire Slurries For Solar Hydrogen Generation., Saumya Gulati

Electronic Theses and Dissertations

The intermittent nature of the Sun makes it difficult to use it as a primary source of electricity and often needs to be supplemented by electricity from the grid which comes from fossil fuels. This motivates the need for solar energy storage. Photoelectrochemical (PEC) water-splitting has been explored as a means to convert solar energy into hydrogen (and oxygen), which can be stored as fuel. The current method of coupling PV and electrolyzer units has been widely commercialized, however, the cost of H₂ generated is far from the target of $1/kg set by the DOE under the Energy EarthShot …

Novel Microdevices To Analyze Toxic Volatile Organic Compounds., Sujoy Halder

Electronic Theses and Dissertations

There has been a growing interest to measure volatile organic compounds (VOCs) in a range of environmental applications. The presence of toxic VOCs in the air has been associated with serious health problems including asthma, central nervous system dysfunction, cardiovascular disease and cancer, etc. Different analytical instruments such as gas chromatography-mass spectrometry (GC-MS) and sensor systems, such as metal oxide sensors are used to analyze VOCs. However, challenges still exist in the detection of airborne VOCs because of their trace concentration and interference with complex gas mixtures. In this dissertation, two microfabricated devices, a sensor array and a micropreconcentrator were …

Synthesis, Property Tuning And Degradation Studies Of Phosphorene-Based Materials., Usman Onuminya Abu

Electronic Theses and Dissertations

Two-dimensional (2D) layered materials have sparked the interest of researchers because of their interesting properties drawn from quantum confinement effects, elevated density of states (DOS), increased surface area, increased active sites, etc. Phosphorene, an interesting addition to the 2D material family in 2014, has interesting properties such as in-plane anisotropy, elevated carrier mobility and thickness-dependent bandgaps that have made it a material of intense interest. Furthermore, there have been theoretical studies predicting that phosphorene could be made even more versatile by intercalating alkali atoms into its layers. Intercalation has proven to be a veritable tool for synthesis, modification, transformation, and …

Chloramine Devulcanization Of Waste Rubber., Patrick Kroeger

Electronic Theses and Dissertations

The disposal of waste rubber, particularly tire rubber, continues to pose a challenge in the 21st century. As a result, most end-of-life tires (ELTs) are either dumped in landfills or burned as tire-derived fuel. Chloramine devulcanization may offer a viable solution to this problem. Chloramine devulcanization is a low-temperature, low-pressure, process that selectively breaks sulfur crosslinks while preserving the polymer backbone. Chloramine devulcanization enables the recovery of chloramine recovered carbon black (CrCB) and devulcanized rubber (CdR) as separate products. Initial analysis of CdR revealed that it was formable and malleable, suggesting that crosslinking was absent. Spectroscopy showed that CdR contained …

Detection Of Toxic Aldehydes In Aerosols Of Electronic Cigarettes., Ellie Bess Reed

Electronic Theses and Dissertations

Over the past decade, use of electronic cigarettes (e-cigarettes) has increased in the younger generations of the United States. With the broad range of flavors and devices distributed on the market, American youth are prime marketing targets for the e-cigarette industry. To create a more regulated market, research of this thesis has been conducted on newer generations of e-cigarette “MOD” devices to examine how e-cigarette battery power output and coil temperature, concentrations of propylene glycol and vegetable glycerin, added flavorings (strawberry, mango, and menthol), and the presence of nicotine affect generation of aerosol particles and aldehydes in aerosols emitted by …

Dpd Guided Insight On The Formation Process Of Polyethersulfone Membranes By Nonsolvent Induced Phase Separation And The Effects Of Additives, Eric Ledieu

Graduate Theses and Dissertations

Dissipative particle dynamics (DPD), a coarse grain simulation method, was applied to the membrane formation process of non-solvent induced phase separation (NIPS) to gain further insight on the mechanism of certain variables and how they affect the final morphology. NIPS involves two solutions, an organic polymer dissolved in an organic solvent colloquially called the dope and an aqueous coagulation bath, brought into contact with one another. The solvents then mix, causing the polymer to fall out of solution as an asymmetric membrane with a dense surface layer and a more open subsurface layer in response to the decreasing solubility. Polyethersulfone …

Waste Biomass-Derived Ultraporous Functionalized Superactivated Hydrochars For Hydrogen Storage And Carbon Capture, Al Ibtida Sultana

Theses and Dissertations

Accelerating world population and simultaneous growth in economic race has resulted in parallel rise of waste generation where the necessity of mitigating the climate change, via transitioning towards a clean energy economy and minimization of greenhouse gas from atmosphere, is in urgent need of attention. Hence, the objectives of this dissertation comprised of firstly upcycling waste biomass into low-cost and effective adsorbent material such that, secondly, its surface could be tailored by modulating its synthesis conditions (hydrothermal carbonization and chemical activation) to be developed into ultraporous and functionalized adsorption medium in order to, thirdly, assess its application as adsorbents for …