Chemical Engineering Commons^™

Synthesis Of Novel Chiral Phosphorothioic Acid Organocatalysts And Application To Synthetic Methodology, Parsa Azaei

Undergraduate Research Symposium Posters

Much research efforts have been centered towards the synthesis of novel Bronsted acid catalysts. These organocatalyst enable synthesis of natural products, pharmaceuticals, and bioactive small molecules under toxic-metal-free conditions by donating their protons, while not being consumed in the reaction. Chiral phosphorothioic acid have significant potential as novel organocatalysts due to their high modifiability of chirality and acidity under environmentally friendly conditions; however, synthesis of these organocatalysts are far and in between. Therefore, our research aimed to i) synthesize novel phosphorothioic acid organocatalysts and ii) to apply these novel catalysts toward new methodology development.

Towards High-Rate Thermoplastic Composites, Chris Croshaw

Dissertations

This dissertation attempts to identify and address the problems associated with high-rate thermoplastic composites. Herein, three primary research thrusts were investigated; the first two chapters focus on the melt-state degradation mechanism of PEKK copolymers and its role on downstream crystallization and thermomechanical properties, the third chapter examines the role of graphene nanoplatelets (GNP) on the crystallization and melting behavior of PEKK 70/30, and the final chapter focused on radio frequency and induction heating of PEKK nanocomposites.

The melt-state degradation mechanism was identified using a combination of x-ray photoelectron spectroscopy (XPS), molecular dynamics (MD), and quantum mechanics (QM) simulations. Melt-state degradation …

Controlling Differentiation Of Adult Stem Cells Via Cell-Derived Nanoparticles: Implications In Bone Repair, Shruthi Polla Ravi, Yasmeen Shamiya, Aishik Chakraborty, Ali Coyle, Alap A. Zahid, Jin Wang, Michael Boutilier, Emmanuel Ho, Arghya Paul

Chemical and Biochemical Engineering Publications

No abstract provided.

Prophylaxis And Remediation For Future Pandemic Pathogens-(Lessons From A Post-Covid World), Mark E. Obrenovich, Moncef B. Tayahi, Caryn L. Heidt, Steven N. Emancipator

Michigan Tech Publications, Part 1

Since influenza and coronaviruses are currently deadly and emerging threats worldwide, better treatment, remediation and prevention options are needed. In that regard, a basic understanding of severe acute respiratory syndrome (SARS)-CoV-2/COVID-19 () and other viral pathogen mechanisms of transmission are expected. Unfortunately, unprecedented, and growing distrust of vaccines and even masks or personal protective equipment (PPE) in the United States and elsewhere presents itself as an added challenge. We postulate that development of improved and highly effective prophylactic measures, together with new life-saving therapies that do inhibit or otherwise treat infection of SARS-CoV-2, influenza and other viral pathogens, could be …

Programming The Properties Of Branched Polymers Through Precision Architectures, Michael R. Dearman

LSU Master's Theses

The glass transition of branched polymers is determined by multiple structural parameters that dictate their inter- and intramolecular interactions, and ultimately, their molecular packing in the amorphous phase. Here we examined the impact of side chain length, backbone length, molecular weight composition, and topology on the glass transition behavior of bottlebrush polymers. Through examining precision bottlebrush polymer libraries (PBP, ĐSC = 1.0), we find the infinite molecular weight Tg is reached at a specific brush length after which the effect of the side-chain length dominates. Being a factor more dominant than the backbone, side-chain length affects the Tg of bottlebrush …

Effect Of Hydrogen Sulfide Content On The Combustion Characteristics Of Biogas Fuel In Homogenous Charge Compression Ignition Engines, Mohammad Alrbai, Adnan Darwish Ahmad, Sameer Al-Dahidi, Ahmad M. Abubaker, Loiy Al-Ghussain, Hassan S. Hayajneh, Nelson Akafuah

Institute of Research for Technology Development Faculty Publications

The use of biogas fuel in homogeneous charge compression ignition (HCCI) engines has been promoted recently due to the environmental advantages. However, hydrogen sulfide (H2 S) forms a non-environment friendly content and biogas impurity that its removal is associated with high costs. In this study, the effect of using biogas fuel in the HCCI engines under different operating conditions is investigated to shed light on the best scenarios of biogas combustion, even with the presence of H2S contents. A modified reaction mechanism is introduced by considering the re- actions of H2 S with other species in the air-fuel mixture. The …

Lipids Affect The Diffusion Of Estradiol In Osteonal Bone, Nicholas Anthony Cimino

ETD Archive

In healthy osteonal bone, embedded osteocytes form an intercellular communication network through overlapping cell membrane extensions, possibly defining an overlooked and clinically relevant lipid-mediated transport pathway for nonpolar molecules. Previous techniques evaluating solute transport in cortical bone limit tissue analysis to microscale areas (less than 1 mm2) using tracers and assumptions that diminish clinical relevance, presenting the need for an improved method to evaluate solute diffusion in macroscale areas (greater than 1 mm2) of osteonal bone. A new diffusion system - constructed of glass and polytetrafluoroethylene - was designed and validated for this purpose, exhibiting minimal adsorption of solutes and …

Elucidation Of Active Site And Mechanism Of Metal Catalysts Supported In Nu-1000, Hafeera Shabbir

All Dissertations

Advances in extraction of shale oil and gas has increased the production of geographically stranded natural gas (primarily consisting of methane (C1) and ethane (C2)) that is burned on site. A potential utilization strategy for shale gas is to convert it into fuel range hydrocarbons by catalytic dehydrogenation followed by oligomerization by direct efficient catalysts. This work focuses on understanding metal cation catalysts supported on metal-organic framework (MOF) NU-1000 that will actively and selectively do this transformation under mild reaction conditions, while remaining stable to deactivation (via metal agglomeration or sintering). I built computational models validated by experimental methods to …

Post-Translational Modifications And Age-Related Hearing Loss, Parveen Bazard, Jennifer Pineros, Alejandro A. Acosta, Mark Thivierge, Lauren R. Paganella, Samuel Zucker, Freyda L. Mannering, Shrikar Modukuri, Xiaoxia Zhu, Robert D. Frisina, Bo Ding

Chemical and Biochemical Engineering Faculty Research & Creative Works

Post-translational modifications (PTMs) affect nearly all systems of the human body due to their role in protein synthesis and functionality. These reversible and irreversible modifications control the structure, localization, activity, and properties of proteins. For this reason, PTMs are essential in regulating cellular processes and maintaining homeostasis. Diseases such as Alzheimer's, cardiovascular disease, diabetes, cancer, and many others have been linked to dysfunctions of PTMs. Recent research has also shown that irregularities in PTMs can be linked to hearing loss, including age-related hearing loss (ARHL) – the number one communication disorder and one of the top neurodegenerative diseases in our …

Generation Of Phase Transitions Boundaries Via Convolutional Neural Networks, Christopher Alexis Ibarra

Open Access Theses & Dissertations

Accurate mapping of phase transitions boundaries is crucial in accurately modeling the equation of state of materials. The phase transitions can be structural (solid-solid) driven by temperature or pressure or a phase change like melting which defines the solid-liquid melt line. There exist many computational methods for evaluating the phase diagram at a particular point in temperature (T) and pressure (P). Most of these methods involve evaluation of a single (P,T) point at a time. The present work partially automates the search for phase boundaries lines utilizing a machine learning method based on convolutional neural networks and an efficient search …

Artificial Neural Network For Predicting Heat Transfer Rates In Supercritical Carbon Dioxide, Vinusha Dasarla Giri Babu

Doctoral Dissertations and Master's Theses

Supercritical carbon dioxide as a working fluid in a closed Brayton cycle is proving to be more efficient than a conventional steam-based Rankine engine. Understanding the heat transfer properties of supercritical fluids is important for the design of a working engine cycle. The thermophysical properties of supercritical fluids tend to vary non-linearly near the pseudo-critical region. Traditionally, empirical correlations are used to calculate the heat transfer coefficient. It has been shown in the literature and within our own studies that these correlations provide inaccurate predictions near the pseudo-critical line, where heat transfer may be deteriorated or enhanced, resulting from strong …

Synthesis And Characterization Of Aerogels From Cellulose-Starch Mixtures For Advanced Packaging Applications, Angel Sagardui

Chemical Engineering Undergraduate Honors Theses

Biodegradable, highly porous, ultra-lightweight, and high-surface-area aerogels from microcrystalline cellulose (MCC) and corn starch mixtures were synthesized through a simple, green process, specifically supercritical carbon dioxide (SC-CO2) drying. Five weight ratios of samples were generated (pure MCC, 2:1 MCC-starch, 1:1 MCC-starch, 1:2 MCC-starch, and pure starch) and were then subjected to a variety of characterization experiments relating to textural and thermal properties as well as morphology, crystallinity, and chemical interactions. Overall, the 1:2 MCC-starch aerogel had the lowest density (0.04 g/cm3), and highest porosity (97%). Conversely, the pure MCC aerogel demonstrated the highest mechanical strength (Young’s modulus of 48.9 MPa), …

Materials Discovery Of Ion-Selective Membranes Using Artificial Intelligence, Reza Maleki, Seyed Mohammadreza Shams, Yasin Mehdizadeh Chellehbari, Sima Rezvantalab, Ahmad Miri Jahromi, Mohsen Asadnia, Rouzbeh Abbassi, Tejraj Aminabhavi, Amir Razmjou

Research outputs 2022 to 2026

Significant attempts have been made to improve the production of ion-selective membranes (ISMs) with higher efficiency and lower prices, while the traditional methods have drawbacks of limitations, high cost of experiments, and time-consuming computations. One of the best approaches to remove the experimental limitations is artificial intelligence (AI). This review discusses the role of AI in materials discovery and ISMs engineering. The AI can minimize the need for experimental tests by data analysis to accelerate computational methods based on models using the results of ISMs simulations. The coupling with computational chemistry makes it possible for the AI to consider atomic …

Live Imaging Of Micro And Macro Wettability Variations Of Carbonate Oil Reservoirs For Enhanced Oil Recovery And Co/ Trapping/Storage, Anastasia Ivanova, A. Orekhov, S. Markovic, Stefan Iglauer, P. Grishin, A. Cheremisin

Research outputs 2022 to 2026

Carbonate hydrocarbon reservoirs are considered as potential candidates for chemically enhanced oil recovery and for CO² geological storage. However, investigation of one main controlling parameter—wettability—is usually performed by conventional integral methods at the core-scale. Moreover, literature reports show that wettability distribution may vary at the micro-scale due to the chemical heterogeneity of the reservoir and residing fluids. These differences may profoundly affect the derivation of other reservoir parameters such as relative permeability and capillary pressure, thus rendering subsequent simulations inaccurate. Here we developed an innovative approach by comparing the wettability distribution on carbonates at micro and macro-scale by combining live-imaging …

Enhancing Human Schwann Cells Reparative Behavior Using Heparin/Collagen Layer-By-Layer Coatings, Luis Carlos Pinzon-Herrera

Graduate Theses and Dissertations

When a peripheral nerve injury (PNI) occurs, the gold standard for tissue regeneration is the use of autografts. However, due to the secondary effects produced by multiple surgeries involved in the removal and implantation of autografts for very small lesions, it is possible to replace them with the use of Nerve Guide Conduits (NGCs). However, NGCs are limited to short lesions (less than 1 cm). This limitation is caused by the absence of compounds in the extracellular matrix (ECM) that autografts can provide. Since much of the regenerative process takes place on the NGC surface, our work aims to modify …

Deep Learning Of Microstructures, Amir Abbas Kazemzadeh Farizhandi

Boise State University Theses and Dissertations

The internal structure of materials also called the microstructure plays a critical role in the properties and performance of materials. The chemical element composition is one of the most critical factors in changing the structure of materials. However, the chemical composition alone is not the determining factor, and a change in the production process can also significantly alter the materials' structure. Therefore, many efforts have been made to discover and improve production methods to optimize the functional properties of materials. The most critical challenge in finding materials with enhanced properties is to understand and define the salient features of the …

Anion Alloying Of Iii-V Semiconductors For Water Splitting., Sonia Calero-Barney

Electronic Theses and Dissertations

The challenge of solar energy conversion and storage translates into the discovery and development of semiconductor materials that can transform sunlight energy into electricity and/or high-energy-density fuels in a cost-effective way. From the solar energy conversion perspective, cation-alloyed III-V solar cells hold record-breaking energy conversion efficiencies, while anion-alloyed III-V’s are particularly interesting for photoelectrochemical hydrogen generation. The major challenge for the adoption of III-V-based technologies lies in the high manufacturing costs of established synthesis techniques and the difficulty to control the composition of ternary alloys. One of the materials investigated in this work is GaSb_zP_1-z. Thermodynamic …

Hydrothermal Preprocessing Of Waste Corn Stover Into Advanced Biorefinery Feedstock, Md Tahmid Islam

Theses and Dissertations

Waste corn stover is one of the most abundant agronomic resources in U.S., however, those are either incinerated or unprocessed in the field to avoid high logistical cost, economic forfeiture, and environmental complications. Hydrothermal carbonization (HTC) is a promising thermochemical process that transforms wet biomass like waste corn stover into a solid fuel called hydrochar, process liquid, and process gas. The recycle of process liquid is warranted as the HTC process liquid contains organic acid that would increase the mass yield and fuel quality of the hydrochar by catalyzing the HTC reactions. HTC also promotes the fuel quality by densifying …

Study Of Sustainable Development In Paper, Printing And Packaging Material Applications To Support Circular Economy, Prashant Ramesh Kotkar

Dissertations

To support circular economy and sustainability, the use of suitable material in paper, printing, and packaging industries, for several types of industrial printing material and printed product applications, plays a significant role for end user applications. Several types of packaging printing materials, specifically those finished with different printing technologies and exposed to different environmental conditions are targeted.

The purpose of this research study is to improve design and evaluation for paper, printing, and packaging material sustainability in end-user applications, to deal with the addressed sustainability issues brought by the paper, printing and packaging products end user groups. As the impacts …

Metabolic Engineering Of Yarrowia Lipolytica For Enhanced Peroxisomal Production Of Polyhydroxyalkanoates, Michael Spagnuolo

All Dissertations

Traditional chemical processes are made inefficient by the generation of side products and reactions that fail to reach completion. Bioprocesses, on the other hand, lose product potential due to the necessity of growing the organism required to produce the desired compounds. The field of metabolic engineering often seeks to alter this balance between product formation and cell growth to generate more product from the same quantity of feed (reagent). In addition to balance, such organisms may also be engineered to produce the desired products from nontraditional substrates, such as waste compounds. In resource-poor environments, the ability to produce a wanted …

Life Cycle Assessment Of Novel Electrochemical Struvite Recovery In Municipal Wastewater Treatment At The Plant And U.S. Watershed Scales, Karla Morrissey

Graduate Theses and Dissertations

As the supply of phosphorus decreases, nutrient recovery in municipal wastewater treatment has become an important area of research. Recovery methods for phosphorus-containing fertilizers, such as struvite, and other products are currently being developed and assessed for their efficiency and economic feasibility. Potential environmental impacts from nutrient recovery are also being assessed as design for the environment is important, especially with regards to the eutrophying potential of phosphorus in phosphorus-limited freshwater aquatic systems. Life cycle assessment (LCA) is a tool that can be used to estimate potential environmental impacts of a product or service focusing on its entire life cycle. …

Surface-Driven Instabilities At Oil-Water Interfaces, Anelisse Claros Mendieta

Graduate Theses and Dissertations

Fluid-fluid interactions are such a wide area and can be observed in different scenarios such as geothermal systems, waterflooding of reservoirs, oil recovery, and water treatment processes. This thesis aims to deepen the understanding of fluid-fluid interactions which include Marangoni flows, charge related instabilities, and surface activity. This thesis studied the interactions of micrometer-sized droplets of an oil (toluene) with surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium …

Using Copper Oxide And Zwitterions To Prevent Membrane Fouling And Optimizing Ultrafiltration Membrane Fabrication With Green Solvents, Cannon Hackett

Graduate Theses and Dissertations

Membrane fouling and sustainable production of membranes are two of the most important challenges in membrane science. Chapter 1 of this dissertation introduces these challenges and covers previous research that has been done in those areas. Additionally, the objectives of this dissertation are stated. In chapter 2, a study was done in which polyethersulfone ultrafiltration membranes were functionalized with copper oxide nanoparticles and zwitterions for the purpose of reducing fouling on the membrane surface. Characterization confirmed the attachment of each component to the membranes. Dead-end filtration was performed with water and bovine serum albumin solution and showed that the functionalization …

Water-Soluble Saponins Accumulate In Drought-Stressed Switchgrass And May Inhibit Yeast Growth During Bioethanol Production, Sarvada Hemant Chipkar, Katherine Smith, Elizabeth M. Whelan, Derek J. Debrauske, Annie Jen, Katherine A. Overmyer, Andrea Senyk, Larkin Hooker-Moericke, Marissa Gallmeyer, Joshua J. Coon, A. Daniel Jones, Trey K. Sato, Rebecca G. Ong

Michigan Tech Publications, Part 1

Background: Developing economically viable pathways to produce renewable energy has become an important research theme in recent years. Lignocellulosic biomass is a promising feedstock that can be converted into second-generation biofuels and bioproducts. Global warming has adversely affected climate change causing many environmental changes that have impacted earth surface temperature and rainfall patterns. Recent research has shown that environmental growth conditions altered the composition of drought-stressed switchgrass and directly influenced the extent of biomass conversion to fuels by completely inhibiting yeast growth during fermentation. Our goal in this project was to find a way to overcome the microbial inhibition and …

Investigations Of Prokaryotic Defense Systems, Hannah Domgaard

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Bacteria are constantly threatened with infection by mobile genetic elements (MGE) such as bacteriophage and plasmids. Bacteriophage and plasmids require the bacteria's cellular infrastructure to replicate their genomes. Rampant replication can lead to cell death which is one reason why bacteria have developed a diverse array of immune systems to prevent or limit infection. This thesis studies three types of bacterial immune systems, type IV-A CRISPR-Cas (Clustered Regularly Interspaced Short Palindromic Repeat –CRISPR associated), type V-A2 CRISPR-Cas systems, and Wadjet systems.

The type IV-A system lies adjacent to a dinG-like helicase gene. Research has shown that this system can target …

Carbon Fibers From Bio-Based Precursors Derived From Renewable Sources, Sagar Kanhere

All Dissertations

Carbon fibers have the highest strength and modulus among all known fibers and are used as reinforcements in high-performance composites [1]. Carbon fibers also have a very low density relative to metals. Therefore, carbon fibers possess ultrahigh specific strength and modulus, which make them desirable for high-performance light-weight composites. A vast majority of commercial carbon fibers are produced from PAN precursors that are expensive, which limits the use of PAN-derived carbon fibers to aerospace applications (e.g., airplanes). However, for costsensitive applications, there is a need for low-cost, moderate performance carbon fibers. Lignin is a low-cost by-product of pulping and biorefining …

Development Of Enzyme-Responsive Polymersomes As A Drug Delivery System For Gm1 Gangliosidosis, Bipin Chakravarthy Paruchuri

All Dissertations

GM1 gangliosidosis is a lysosomal storage disorder caused by deficiency of β-galactosidase (βgal) and subsequent accumulation of GM1 ganglioside in lysosomes. The rare nature of this disorder presents challenges with prognosis and treatment. Enzyme replacement therapy (ERT) can effectively treat systemic deficiencies, but the intravenously administered enzyme cannot cross the blood-brain barrier (BBB) to treat the central nervous system. A delivery system to encapsulate and deliver the enzyme can facilitate enzyme transport across the BBB with suitable surface modifications. One of the pathological aspects of GM1-affected cells is the upregulation of the lysosomal enzyme hexosaminidase A (HexA). In this dissertation, …

Profiling And Engineering The Unfolded Protein Response In Therapeutic Protein-Producing Cho Cell Lines, Dyllan Rives

All Dissertations

Industrial Chinese hamster ovary (CHO) production of therapeutics requires cell lines with high secretory capacity to avoid an accumulation of improperly folded proteins, or endoplasmic reticulum (ER) stress. This presents a challenging engineering bottleneck. The unfolded protein response (UPR) is initiated to overcome ER stress and reestablish homeostasis. In this dissertation, the impacts of ER stress and the UPR on protein production in mammalian cells are detailed, and both selection- and rational-based strategies for enhancing the ER stress response in productive CHO cell lines are reviewed. This project aims to expand on recent research efforts for engineering ER stress-related responses …

Multi-Criteria Decision Matrix Method In The Risk Analysis Of Biodiesel Production Processes, Kaylee Alles

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Renewable fuel technologies aim to mitigate the non-renewability of fossil fuels, challenges with increased energy demand, and the climate impact of fossil fuel emissions. However, before investing in renewable technologies, there need to be decision strategies that assess and identify the best alternatives according to stakeholder priorities. There is also a concern about whether the technologies that are the “most sustainable” effectively meet the acceptable risk requirements of stakeholders. In response to this question, a risk-adapted multi-criteria decision model was developed and compared to a sustainability study that evaluated five renewable diesel technologies, including Green Diesel I, II, and III; …

Performance Comparison Of Several Control Algorithms For Tracking Control Of Pantograph Mechanism, Laylaa Mahmoud Eng, Mohamed Shamseldin Dr, Mohamed Sallam Dr, Abdelghany Mohamed Prof

Future Engineering Journal

A sort of parallel manipulator known as a pantograph robot mechanism was created primarily for industrial requests that required high precision and satisfied speed. While tracking a chosen trajectory profile requires a powerful controller. Because it has four active robot links and one robot passive link in place of just two links like the open chain does, it can carry more loads than the open chain robot mechanism while maintaining accuracy and stability. The calculated model for a closed chain pantograph robot mechanism presented in this paper takes into account the boundary conditions. For the purpose of simulating the dynamics …