Chemical Engineering Commons^™

Pre-Feasibility Study Of Improving Quality Of Low-Grade Fluorite. A Case Study At Phanomthuan Deposit, Kanchanaburi, Thailand, Keosaychai Souvannavong

Chulalongkorn University Theses and Dissertations (Chula ETD)

In this study was presented the pre-feasibility study of improving quality of low-grade fluorite from Phanomthuan deposit, Kanchanaburi province, Thailand. The purpose of this study aims to explore the optimal condition in order to remove the impurities which contained high SiO2, CaCO3 and other minerals, also evaluate the project in term of economic. Therefore, the improvement quality of fluorite by using froth flotation techniques was reach the ceramic grade. The raw material characterization contains CaF2 = 29.4 Wt.%, SiO2 = 43.9 Wt.% and CaCO3 = 6.9 Wt.%. After flotation process the optimal condition result which contains CaF2 = 96.46 Wt.%, …

Elucidation Of The Catalytic Partial Oxidation Of Methane Utilizing The One-Of-A-Kind Catalytic Shock Tube Technique, Robyn E. Smith

Dissertations and Theses

The mechanism for the catalytic partial oxidation of methane has been debated in scientific literature for over 20 years. This is a seemingly simple reaction producing CO, CO₂, H₂ and H₂O through either partial oxidation followed by complete oxidation or complete oxidation followed by reforming steps. What is happening when the reaction is allowed to occur in an environment absent of transport limitations, absent of temperature gradients and temperature changes, absent of boundary layers must be understood and, until now, has yet to be achieved in one experimental technique.

A novel method using a one …

Void Fraction Measurements In Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensor And Pressure Transducers- Effect Of Sparger, Afolabi Gabriel Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Air Ingress And Heat-Driven Flow Relaminarization In A Very High Temperature Reactor (Vhtr), Apoorva Rudra

Dissertations and Theses

Very High Temperature Reactors (VHTRs) are one of six Generation IV reactors that have been proposed for DOE’s Next Generation Nuclear Plant. In addition to using gaseous coolants, VHTRs also display benefits of passive safety systems including intra-core natural circulation for heat removal in accident scenarios. However, a number of substantial engineering challenges are expected in VHTRs, and due to the high temperatures of the coolant involved, material behavior in various components needs to be better understood. Our work focuses mainly on two key phenomena that could lead to localized hot spots in the VHTR reactor core if not addressed …

Literature Survey Of Wet-Waste And Hydrothermal Carbonization System: A Comparative Evaluation, Ramat Olaide Yusuf

Dissertations and Theses

This thesis describes the process of Hydrothermal carbonization and a comparative assessment on recent work done on the process using different feedstocks such as Raw Apple (RA), Apple chip pomace (ACP), apple juice pomace (AJP), grape pomace (GP), macadamia nut-shell (MNS), Sewage Sludge (SS), Poultry Litter (PL) and Grape Marc (GM). The data obtained from the literature survey was compared with the data obtained by the CCL team on the SWPS gasifier (HTC of poultry litter) to obtain how carbon conversion efficiency, syngas composition, thermal efficiency, char production rate, gas production rate and energy utilization vary with carbonization process conditions, …

Investigation Of The Synthesis And Optoelectronic Properties Of Ultrasmall Cdse Quantum Dots, Megan Webster

Dissertations and Theses

Traditional, or 1^st generation, solar cells have a theoretical upper limit of 33% power conversion efficiency based on the thermodynamic limitation of the single p-n junction cell design. This limitation is known as the Shockley-Queisser limit and methods to design solar cells to circumvent it have been creative, with a significant part of the field focused on quantum dot (QD) based systems. With theoretical efficiencies ranging between 44 and 67% for one sun concentration, QD solar cell designs are clearly superior to the limits of 1^st generation solar cells. However, maximum achieved efficiencies for QD-based designs are far …

Electrochemical Properties Of Crystalline Polymorphs Of Mno2 In Aluminum And Zinc Metal Batteries, Subhadip Pal

Dissertations and Theses

The widespread use of non-renewable fossil fuels has led to societal problems like global warming and climate change. Electrochemical energy storage can enable the integration of renewable energy sources that are inherently intermittent (solar, wind, etc.) into the electric grid, though major advances in cost, cycle life, and safety are necessary to have a global impact on the energy landscape. Both aluminium (Al) and zinc (Zn) metals are earth abundant, low-cost, safe, and exhibit high coulombic capacities, which make them promising electrode materials for “beyond lithium-ion” battery chemistries. However, the electrochemical feasibility and charge storage mechanisms of alternative Al and …

Microfluidic Study Of Gravity-Driven Drainage And Coalescence Of Aqueous Two Dimensional Foams, Justin D. Heftel

Dissertations and Theses

Foams, a two-phase dispersion, are staples of the cosmetic, personal care, petroleum, pharmaceutical, and other industries. Central to these applications is the stability of the dispersion against separation. Foams break down by two mechanisms: the first is bubble coalescence, which is driven by the gravity drainage of the continuous phase. The drainage acts to push the bubbles against each other, and leads to the formation of thin lamellae, which break and cause the coalescence. The second is the mass transfer of the dispersed phase through the continuous phase, which is caused by the difference in pressures between the bubbles and …

Void Fraction Measurements In A Large (0.3 M) Diameter Bubble Column Using Wire Mesh Sensors And Pressure Transducers: Effect Of Spargers, Afolabi G. Ojo

Dissertations and Theses

The importance of the accurate temporal and spatial measurements of the two-phase flow parameters in bubble columns is very well known. The aim of this research work is to report the spatial measurements of the void fraction distribution in a 30 cm diameter cylindrical bubble column using Wire Mesh Sensor (WMS) tomography and Pressure Transducers. Pair of WMS sensors, with a 64×64 wire configuration of each sensor, were installed which are separated by a distance along the axis of the bubble column. Wire Mesh Sensors and PTs Data were collected for time-averaged and transient with a sampling frequency of 1000 …

Intensification Of Gas Absorption In A Downward Flow Microbubble Bioreactor, Manizheh Ansari

Dissertations and Theses

Bioreactors are of interest for value-upgrading of stranded or waste industrial gases, such as CO, CH₄, or syngas. Process economics requires reduction of reactor cost and size while maintaining high production rate via rapid delivery of gas feedstock to the liquid phase which in turn requires a high volumetric mass transfer rate (). One strategy to achieve this goal is to increase interfacial area density, a, to >3000 m² m^-3, while minimizing use of energy. Here we show a novel reactor column design that uses a micro-jet array to break feedstock at ambient pressure …

Gas Hold-Up Measurements In 0.3 M Diameter Bubble Column: Effect Of Electrolytes, Heber Blanco De Brand

Dissertations and Theses

The present work reports the axial, radial and temporal gas hold-up profiles in a 0.3 m diameter batch bubble column using a pair of Wire Mesh Sensors and six pressure transducers.

Designing Particle Tracking Software For A Theoretical Understanding Of Magnetic Janus Particle Aggregation, Thomas W. Long

Dissertations and Theses

Magnetic Janus particles are spherical colloids covered with a thin magnetic cap on one half of their surface. The asymmetric magnetic material gives the particles a magnetic dipole shifted away from the center of mass of the particle. The magnetic dipole either points perpendicular (axially-shifted FexOy caps) or parallel (radially-shifted (Co/Pd)x multilayered particles) to the shift vector. When a magnetic field is applied to a system of magnetic Janus particles, the particles aggregate into chains aligned with the magnetic field. The rate of aggregation is of theoretical and practical interest and the focus of the thesis.

Optically studying samples of …

Asphaltene Stability In Crude Oil During Carbon Dioxide Injection And Its Impact On Oil Recovery: A Review, Data Analysis, And Experimental Study, Sherif M. Fakher

Masters Theses

"Crude oils are usually associated with many compounds, some of which are favorable and others, which are not. One of the most unfavorable components of crude oil that pose severe operational problems and decreases oil production significantly are asphaltenes. These compounds are solids that are homogenized in the crude oil at room temperature but tend to separate from solution when agitated. They can deposit in the reservoir pores, wellbore, and transportation pipelines thus causing severe operational problems and oil recovery reduction.

Even though researchers have been studying asphaltenes for more than 100 years, there is still an ambiguity concerning asphaltene …

Performance Investigation Of Surface Modified Ceramic Microfiltration Membranes And The Effects Of Ionic Strength, Choji Bitrus Daches

Masters Theses

"The performance of ceramic membranes surface coated with cysteic acid to improve efficiency and reduce fouling rate was studied under two transmembrane pressure (TMP) and constant crossflow velocity (CFV). The filtration process was done in crossflow mode to allow for extended operation of the membranes. the performance of the membranes were determined in terms of the measured fluxes and on content rejection. Cleaning-in-place (CIP) was done on the membranes to ensure flux recovery after each run. The results showed significant improvement on the performance of the membranes with respect to high permeate fluxes and high oil content rejection (> 99.5%). …

Thermal Analysis And Design Of Conduction Links For A Superconducting Radio Frequency Resonator, Aaron Mckeown

Graduate Research Theses & Dissertations

The SRF conduction link project at Fermi National Accelerator Laboratory aims to develop an SRF particle accelerator design that is more applicable for industrial use. Collaboration between NIU college of engineering and NIU department of physics provided the bulk of design and analysis for this project. Currently, cooling systems, used in SRF particle accelerators, pump liquid helium across the SRF cavity to provide convection based cooling. The goal of this project is to incorporate a conduction based cooling system. In a conduction based cooling system, heat will flow from the SRF cavity into a cryocooler through a conduction link. In …

Synthesis, Functionalization, And Application Of Nanofiltration And Composite Membranes For Selective Separations, Andrew Steven Colburn

Theses and Dissertations--Chemical and Materials Engineering

Future nanofiltration (NF) membranes used for selective separations of ions and small organic molecules must maintain performance in environments where high concentrations of total dissolved solvents or foulants are present. These challenges can be addressed through the development of composite membranes, as well as the engineering of enhanced surface properties and operating conditions for existing commercial membranes.

In this work, ion transport through commercial thin film composite (TFC) polyamide NF membranes were studied in both lab-prepared salt solutions and industrial wastewater. The dependence of several variables on ion rejection was investigated, including ion radius, ion charge, ionic strength, and temperature. …

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …

Development Of Novel Temperature Responsive Polymeric Sorbents And Their Applications In Water Remediation, Shuo Tang

Theses and Dissertations--Chemical and Materials Engineering

Water remediation utilizing sorption has found strong interest due to its inexpensiveness, universal nature and ease of operation. In particular, thermo-responsive sorbents consisting of N-isopropylacrylamide (NIPAAm) offer significant potential as “smart” and advanced materials to remove multiple aqueous pollutants. NIPAAm exhibits excellent thermo-responsiveness, which senses the external temperature variation and changes its swelling and sorption behaviors in a sharp and rapid manner. At the beginning of this work, an extensive review of literature has been compiled to provide a summary of NIPAAm-based thermo-responsive sorbents in water/wastewater remediation applications.

Initially, we developed a novel approach to synthesize and characterize NIPAAm copolymeric …

Functionalization Of Iron Oxide Nanoparticles And The Impact On Surface Reactive Oxygen Species Generation For Potential Biomedical And Environmental Applications, Trang Mai

Theses and Dissertations--Chemical and Materials Engineering

Iron oxide nanoparticles (IONPs) have been widely studied for a variety of applications, from biomedical applications (e.g., cell separation, drug delivery, contrast agent for magnetic resonance imaging and magnetically mediated energy delivery for cancer treatment) to environmental remediations (e.g., heavy metal removal and organic pollutants degradation). It has been demonstrated that IONPs can induce the production of reactive oxygen species (ROS) via Fenton/Haber-Weiss reactions which has been shown to be one of the key underlying mechanisms of nanoparticles toxicity. This inherent toxicity of nanoparticles has been shown to enhance the efficacy of traditional cancer therapies such as chemotherapy and radiation. …

Mechanical Properties And Degradation Of High Capacity Battery Electrodes: Fundamental Understanding And Coping Strategies, Yikai Wang

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion and lithium (Li) metal batteries with high energy density and stability are in high demand for the development of electric vehicles and smart grids. Intensive efforts have been devoted to developing high capacity battery electrodes. However, the known high capacity electrode materials experience fast capacity fading and have limited cycle life due to electromechanical degradations, such as fracture of Si-based electrodes and dendrite growth in Li metal electrodes. A fundamental understanding of electromechanical degradation mechanisms of high capacity electrodes will provide insights into strategies for improving their electrochemical performance. Thus, this dissertation focuses on mechanical properties, microstructure …

Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu

Theses and Dissertations--Chemical and Materials Engineering

The cell plasma membrane is an interactive interface playing an important role in regulating cell-to-cell, cell-to-tissue contact, and cell-to-environment responses. This environment-responsive phospholipid layer consisting of multiple dynamically balanced macromolecules, such as membrane proteins, carbohydrate and lipids, is regarded as a promising platform for various surface engineering strategies. Through different chemical modification routes, we are able to incorporate various artificial materials into the cell surface for biomedical applications in small molecule and cellular therapeutics.

In this dissertation, we establish two different cell coating techniques for applications of cell-mediated drug delivery and the localization of cell-based therapies to specific tissues. The …

Impact Of Conformational Change, Solvation Environment, And Post-Translational Modification On Desulfurization Enzyme 2'-Hydroxybiphenyl-2-Sulfinate Desulfinase (Dszb) Stability And Activity, Landon C. Mills

Theses and Dissertations--Chemical and Materials Engineering

Naturally occurring enzymatic pathways enable highly specific, rapid thiophenic sulfur cleavage occurring at ambient temperature and pressure, which may be harnessed for the desulfurization of petroleum-based fuel. One pathway found in bacteria is a four-step catabolic pathway (the 4S pathway) converting dibenzothiophene (DBT), a common crude oil contaminant, into 2-hydroxybiphenyl (HBP) without disrupting the carbon-carbon bonds. 2’-Hydroxybiphenyl-2-sulfinate desulfinase (DszB), the rate-limiting enzyme in the enzyme cascade, is capable of selectively cleaving carbon-sulfur bonds. Accordingly, understanding the molecular mechanisms of DszB activity may enable development of the cascade as industrial biotechnology. Based on crystallographic evidence, we hypothesized that DszB …

Targeted Illumination Strategies For Hydrogen Production From Purple Non-Sulfur Bacteria, John D. Craven

Theses and Dissertations--Chemical and Materials Engineering

The movement towards a more sustainable energy economy may require not only the generation of cleaner fuel sources, but the conversion of waste streams into value-added products. Phototrophic purple non-sulfur bacteria are capable of metabolizing VFAs (volatile fatty acids)and generate hydrogen as a byproduct of nitrogen fixation using energy absorbed from light. VFAs are easily produced from dark anaerobic fermentation of food, agricultural, and municipal wastes, which could then be fed into photobioreactors of purple bacteria for hydrogen production.

The process of photofermentation by purple bacteria for hydrogen production remains attractive due to the capability of reaching high substrate conversions …

Development Of Magnetic Nanocomposite Materials As Reusable Adsorbents For Chlorinated Organics In Contaminated Water, Angela Gutierrez

Theses and Dissertations--Chemical and Materials Engineering

The constant growth in population worldwide over the past decades continues to put forward the need to provide access to safe, clean water to meet human needs. There is a need for cost-effective technologies for water and wastewater treatment that can meet the global demands and the rigorous water quality standards and at the same maximizing pollutant efficiency removal. Current remediation technologies have failed in keeping up with these factors without becoming cost-prohibitive. Nanotechnology has recently been sought as a promising option to achieve these goals. The use of iron oxide magnetic nanoparticles as nanoadsorbents has led to a new …

Synthesis, Characterization And Applications Of Reduced Graphene Oxide And Composite Membranes For Selective Separations And Removal Of Organic Contaminants, Ashish Aher

Theses and Dissertations--Chemical and Materials Engineering

Among the next generation materials being investigated for membrane development, partially reduced Graphene Oxide (rGO) has received increasing attention from the membrane community. rGO-based nanofiltration membranes have shown promising results in applications such as partial desalination, organic contaminant removal, gas-phase separations, and separations from solvent media. rGO offers a unique platform compared to common polymeric membranes since it can be used for separation applications in both aqueous and organic solvent media. An rGO-based platform could also be utilized to synthesize reactive membranes, giving rGO membranes the additional capability of reactively removing organic contaminants. This research focuses on the synthesis of …

Nanoharvesting And Delivery Of Bioactive Materials Using Engineered Silica Nanoparticles, Md Arif Khan

Theses and Dissertations--Chemical and Materials Engineering

Mesoporous silica nanoparticles (MSNPs) possess large surface areas and ample pore space that can be readily modified with specific functional groups for targeted binding of bioactive materials to be transported through cellular barriers. Engineered silica nanoparticles (ESNP) have been used extensively to deliver bio-active materials to target intracellular sites, including as non-viral vectors for nucleic acid (DNA/RNA) delivery such as for siRNA induced interference. The reverse process guided by the same principles is called “nanoharvesting”, where valuable biomolecules are carried out and separated from living and functioning organisms using nano-carriers. This dissertation focuses on ESNP design principles for both applications. …

The Fabrication And Characterization Of Metal Oxide Nanoparticles Employed In Environmental Toxicity And Polymeric Nanocomposite Applications, Matthew Logan Hancock

Theses and Dissertations--Chemical and Materials Engineering

Ceria (cerium oxide) nanomaterials, or nanoceria, have commercial catalysis and energy storage applications. The cerium atoms on the surface of nanoceria can store or release oxygen, cycling between Ce³⁺ and Ce⁴⁺, and can therefore act as a therapeutic to relieve oxidative stress within living systems. Nanoceria dissolution is present in acidic environments in vivo. In order to accurately define the fate of nanoceria in vivo, nanoceria dissolution or stabilization is observed in vitro using acidic aqueous environments.

Nanoceria stabilization is a known problem even during its synthesis; in fact, a carboxylic acid, citric acid, is …

Optimization And Cost Comparison Of Reactor Types In A Styrene Production Process, Claire Lenore Cozadd

Honors Theses

The focus of this thesis is to use the equivalent annual operating costs of isothermal, adiabatic, and packed bed reactors in order to determine which reactor is most cost effective in a styrene production process. In order to understand the steps leading up to this comparison, background information is first given regarding chemical engineering design, optimization, and process simulation. This information was necessary for completing the ChE 451 design project, which was to analyze the base case styrene process before optimizing it, in fall 2018. The results of this project are briefly outlined in the second section. The third section …

Discrete Optimization Of A Styrene Production Process, Seth Gray

Honors Theses

This thesis will outline the two phases of my capstone design project for Chemical Engineering. The first goal was to simulate a styrene production process in Excel alongside my group members in ChE 451. During this phase, we looked at startup of the process and the first 12 years of operation. After the base case which included an isothermal reactor, the decision was made to switch to an adiabatic reactor based on net present value evaluations. Discrete optimization took place on the adiabatic reactor and the subsequent process. The second phase of my capstone project was the portion assigned to …

Effects Of Seawater On Carotenoid Production And Lipid Content Of Engineered Saccharomyces Cerevisiae, Yuqi Guo, Shangxian Xie, Joshua Yuan, Katy Kao

Faculty Publications

The use of seawater in fermentation can potentially reduce the freshwater burden in the bio-based production of chemicals and fuels. We previously developed a Saccharomyces cerevisiae carotenoids hyperproducer SM14 capable of accumulating 18 mg g−1 DCW (DCW: dry cell weight) of β-carotene in rich media (YPD). In this work, the impacts of seawater on the carotenoid production of SM14 were investigated. When using nutrient-reduced media (0.1× YNB) in freshwater the β-carotene production of SM14 was 6.51 ± 0.37 mg g−1 DCW; however in synthetic seawater, the production was increased to 8.67 ± 0.62 mg g−1 DCW. We found that this …