Chemical Engineering Commons^™

Polyvinylpyrrolidone - Reduced Graphene Oxide - Pd Nanoparticles As An Efficient Nanocomposite For Catalysis Applications In Cross-Coupling Reactions, Hany A. Elazab, Tamer T. El-Idreesy

Chemical Engineering

This paper reported a scientific approach adopting microwave-assisted synthesis as a synthetic route for preparing highly active palladium nanoparticles stabilized by polyvinylpyrrolidone (Pd/PVP) and supported on reduced Gra-phene oxide (rGO) as a highly active catalyst used for Suzuki, Heck, and Sonogashira cross coupling reactions with remarkable turnover number (6500) and turnover frequency of 78000 h-1. Pd/PVP nanoparticles supported on re-duced Graphene oxide nanosheets (Pd-PVP/rGO) showed an outstanding performance through high catalytic activ-ity towards cross coupling reactions. A simple, reproducible, and reliable method was used to prepare this efficient catalyst using microwave irradiation synthetic conditions. The synthesis approach requires simultaneous reduc-tion …

Proactive Energy Optimization In Residential Buildings With Weather And Market Forecasts, Cody Simmons, Joshua Arment, Kody M. Powell, John Hedengren

Faculty Publications

This work explores the development of a home energy management system (HEMS) that uses weather and market forecasts to optimize the usage of home appliances and to manage battery usage and solar power production. A Moving Horizon Estimation (MHE) application is used to find the unknown home model parameters. These parameters are then updated in a Model Predictive Controller (MPC) which optimizes and balances competing comfort and economic objectives. Combining MHE and MPC applications alleviates model complexity commonly seen in HEMS by using a lumped parameter model that is adapted to fit a high-fidelity model. Heating, ventilation, and air conditioning …

Metal-Free Deep Eutectic Solvents: Preparation, Physical Properties, And Significance, Burcu E. Gurkan, Henry Squire

Faculty Scholarship

In the past decade, reports detailing the preparation, characterization, and application of deep eutectic solvents (DESs) have grown in number significantly, showing signs of increased interest and attention. Indeed, these systems provide tunable polar environments attractive for their ease of synthesis and lack of need for purification. DESs are homogeneous systems composed of two or more components having a significantly depressed melting point compared to either constituent material. As interest and application of DESs grow, the need for a common understanding of their preparation and characterization is required. In this Perspective, we discuss metal-free DESs, focusing on their preparation, characterization …

Modeling The Effects Of Distribution System Topology On Water Quality, Chun-Ying Chao

McKelvey School of Engineering Graduate Student Theses & Dissertations

Inadequate treatment of drinking water causes the formation of disinfection by-products and the regrowth of harmful microbial species. Various studies have addressed the problem of water quality monitoring, but very few have employed topological analysis, a valuable mathematical tool widely applied in biological, business, and social research. This thesis examines the relationship between the topological properties of water distribution systems and water-quality models. In particular, the research proposes a novel framework for mapping network topological attributes to water-quality models. This research adopts topological metrics to assess the accuracy of the predictions of chlorine concentrations in dead ends. It examines four …

A New Synthesized Microalloys Steel Ods Of High Amplitude Ultrasonically Irradiation, Marzuki Silalahi, Hanif Abdurrahman Wicaksana, Ferhat Aziz, Syahfandi Ahda, Mohamad Riza Iskandar

Makara Journal of Technology

Micropowders of oxide-dispersion-strengthened (ODS) steel have been synthesized using the ultrasonic irradiation method with variations in amplitude. The ultrasonic irradiation process is performed for 50 h at a frequency of 20 kHz with 40%, 50%, and 60% amplitudes in toluene solution. The formation of Fe-Cr microalloys in the preparation of Fe- 15Cr-0.5Y2O3 powder was analyzed using SEM-EDS, X-ray diffraction (XRD), and TEM-EDS. The percentage of Fe- Cr phase mass fraction of ODS steel micropowder formed during ultrasonic irradiation with 40%:50%:60% amplitude was 12.2%:34.1%:22.1%, with 25.67:77.02:38.51 nm crystallite size. The crystallite size at 50% amplitude was the largest, and the diffusion …

Comprehensive Inspection On The Experimental Ferritic Stainless Steel By Means Of Transmission Electron Microscopy And Neutron Diffraction Techniques, Parikin Parikin, Mohammad Dani, Riza Iskandar, Aziz Khan Jahja, Andon Insani, Joachim Mayer

Makara Journal of Technology

The field of physical metallurgy is one of the primary beacons that guide alloy developments for multipurpose materials such as the in-core structure materials for pressure vessel components and heat exchangers. The surface microstructure of new ferritic steel with significant local constituent materials was characterized by high resolution powder neutron diffractometer (HRPD) and transmission electron microscope (TEM), combined with the energy dispersive X-ray spectroscopy (EDX). The alloy contains73% Fe, 24% Cr, 2% Si, 0.8% Mn, and 0.1% Ni, in %wt. The charge materials were melted by the casting techniques. The neutron diffractograms obtained shows five dominant diffraction peaks at (110), …

Study On Antibacterial Of Chitosan/Hydroxyapatite Doped Magnesium Composite As A Material For Bone Graft Applications, Andromeda Dwi Laksono, Teodoro A. Amatosa, Jr., Hilda Pebrianti Octaviana Sitorus, Wentika Putri Kusuma Asih, Sulistijono Sulistijono

Makara Journal of Technology

Hydroxyapatite (HAp) is one of the constituent minerals of bone and teeth, that has been widely used for synthesizing bone graft. Due to the limitation on properties of the hydroxyapatite, it is doping with Magnesium (HAp-Mg). The addition of Chitosan (Chi) was expected to improve the antibacterial properties of HAp-Mg. The present research aims to study the influence of Chitosan with 0, 5, 15, and 25 wt% addition on biocompatibility properties of Chi/HAp-Mg composite. HAp-Mg was synthesized using the sol-gel method; meanwhile, Chi/HAp-Mg composite was manufactured by mixing Chitosan in acetic acid, and HAp-Mg was added into the mixture. The …

Evaluation Of Primal-Dual Splitting Algorithm For Mri Reconstruction Using Spatio-Temporal Structure Tensor And L1-2 Norm, Mia Rizkinia, Masahiro Okuda

Makara Journal of Technology

Magnetic resonance imaging (MRI) is an essential medical imaging technique which is widely used for medical research and diagnosis. Dynamic MRI provides the observed object visualization through time and results in a spatiotemporal signal. The image sequences often contain redundant information in both spatial and temporal domains. To utilize this characteristic, we propose a spatio-temporal reconstruction approach based on compressive sensing theory. We apply spatio-temporal structure tensor using nuclear norm, in addition to the wavelet sparsity regularization. The spatio-temporal structure tensor is a matrix that consists of gradient components of the MRI data w.r.t the spatial and temporal domains. For …

Influence Of Nh4f In Dextran Based Biopolymer Electrolytes: Conductivity And Electrical Analysis, Muhamad Hafiz Hamsan, Mohd Fakhrul Zamani Kadir, Shujahadeen Bakar Aziz, Muhammad Amirul Solihin Azha, Saifful Kamaluddin Muzakir

Makara Journal of Technology

Dextran polymer host was doped with different concentrations of ammonium fluoride (NH4F) via casting technique. In this present work, dextran-NH4F film has been employed to investigate the ionic conductivity using electrochemical impedance spectroscopy from 50 to 5 MHz. The highest room temperature conductivity is achieved at (2.33 ± 0.76) × 10-3 S cm-1 with 40 wt.% NH4F. The electrolyte is found to obey Arrhenius rule at high temperature with activation energy of 0.21 eV. Dielectric analysis has been performed to obtain better understanding on the conductivity pattern. The dielectric parameters e.g. ɛreal, ɛimag, Mreal, and Mimag have been tested as …

Acute Toxicitystudy Of Choline Based Ionic Liquids Towards Danio Rerio Fish And The Aggregation Behavior Of Their Binary Mixtures, Mansoor Ul Hassan Shah, Nasruddin Nasruddin, Suzana Bt Yusup, Muhammad Moniruzzaman

Makara Journal of Technology

Marine oil spills are effectively controlled by chemical dispersants. However, the toxicity associated with it reduce its employment in marine environment. To overcome this limitation, the acute toxicity of choline based ionic liquids was evaluated as a potential low toxic variant for oil spill remediation. Further, the aggregation behavior of the individual as well as their binary mixtures was also evaluated by employing tensiometry technique. The half-lethal concentration, LC50on zebrafish (Danio rerio) of three choline based ionic liquids showed that the studied ionic liquids (ILs) fall in the range of “practically nontoxic” ( 100-1000 mg L-1).Various micellar properties showed that …

Neutron Diffraction Study Of Multiferroic 0.6nife2o4/0.4batio3 Composite, Engkir Sukirman, Yosef Sarwanto, Syahfandi Ahda, Andon Insani

Makara Journal of Technology

Neutron diffraction study on the 0.6NiFe2O4/0.4BaTiO3 multiferroic composite has been carried out. The 0.6NiFe2O4/0.4BaTiO3 multiferroic composites have been synthesized by solid reaction method. In this study, 20 g of BaTiO3 (BTO) and 20 g of NiFe2O4 (NFO) compounds were prepared from the powder raw materials of BaO3 and TiO2 for BTO, and NiO and Fe2O3 for NFO. Furthermore, both BTO and NFO were each crushed for 5 hours using High Energy Milling (HEM). Then the BTO and NFO were calcined in the furnace at 950 °C/5 hours and 900 °C/5 hours, respectively. Both NFO and BTO precursors were manually mixed …

The Effect Of Precursor Design And Processing On The Semi-Crystalline Morphologies Of Polyacrylonitrile-Based Carbon Fiber, Katelyn Cordell

Dissertations

Basic research to control the morphology of polyacrylonitrile (PAN)-based carbon fiber is crucial for next generation composites as it determines their mechanical properties and final use. Poor molecular design of PAN-based precursors and fiber processing causes morphological defects and mechanical limitations.^1,2 This research focused on utilizing the controlled polymerization technique, reversible addition-fragmentation chain transfer (RAFT), of novel acrylamide comonomers to afford well-defined precursors with precisely controlled molecular design. This controlled RAFT technique improved the overall precursor graphitic structure as evident by the increased extent of stabilization and reduced activation energy as compared to precursors prepared by traditional free radical …

Beneficial Mutations For Carotenoid Production Identified From Laboratory-Evolved Saccharomyces Cerevisiae, Avinash Godara, Maria Alejandra Gomez Rodriguez, Joshua Weatherston, George Peabody, Hung-Jen Wu, Katy Kao

Faculty Publications

Adaptive laboratory evolution (ALE) is a powerful tool used to increase strain fitness in the presence of environmental stressors. If production and strain fitness can be coupled, ALE can be used to increase product formation. In earlier work, carotenoids hyperproducing mutants were obtained using an ALE strategy. Here, de novo mutations were identified in hyperproducers, and reconstructed mutants were explored to determine the exact impact of each mutation on production and tolerance. A single mutation in YMRCTy1-3 conferred increased carotenoid production, and when combined with other beneficial mutations led to further increased β-carotene production. Findings also suggest that the ALE …

Integrating The Three E’S In Wastewater Treatment, Kirti Maheshkumar Yenkie

Henry M. Rowan College of Engineering Departmental Research

Water is often the most mispriced and misused component in domestic, industrial and agricultural sectors. The rise in world population and industrialization in developing nations has tremendously increased the demand for water and has resulted in the generation of wastewater which is contaminated with dangerous pollutants and unknown contaminants. Furthermore, if the wastewater is not treated properly the toxic pollutants will leach back into the ground ultimately contaminating the groundwater resources. Thus, wastewater treatment, reuse, and safe disposal have become crucial for sustainable existence. In this review, the different aspects involved in designing efficient and sustainable wastewater treatment systems such …

Bicontinuous Interfacially Jammed Emulsion Gels (Bijels) As Media For Enabling Enzymatic Reactive Separation Of A Highly Water Insoluble Substrate, Sanghak Cha, Hyun Lim, Martin Haase, Kathleen Stebe, Gyoo Jung, Daeyeon Lee

Henry M. Rowan College of Engineering Departmental Research

Although enzymes are efficient catalysts capable of converting various substrates into desired products with high specificity under mild conditions, their effectiveness as catalysts is substantially reduced when substrates are poorly water-soluble. In this study, to expedite the enzymatic conversion of a hydrophobic substrate, we use a bicontinuous interfacially jammed emulsion gel (bijel) which provides large interfacial area between two immiscible liquids: oil and water. Using lipase-catalyzed hydrolysis of tributyrin as a model reaction in a batch mode, we show that bijels can be used as media to enable enzymatic reaction. The bijel system gives a four-fold increase in the initial …

Interfacial Contact With Noble Metal - Noble Metal And Noble Metal - 2d Semiconductor Nanostructures Enhance Optical Activity, Ricardo Raphael Lopez Romo

Graduate Theses and Dissertations

Noble metal nanoparticles and two-dimensional (2D) transition metal dichalcogenide (TMD) crystals offer unique optical and electronic properties that include strong exciton binding, spin-orbital coupling, and localized surface plasmon resonance. Controlling these properties at high spatiotemporal resolution can support emerging optoelectronic coupling and enhanced optical features. Excitation dynamics of these optical properties on physicochemically bonded mono- and few-layer TMD crystals with metal nanocrystals and two overlapping spherical metal nanocrystals were examined by concurrently (i) DDA simulations and (ii) far-field optical transmission UV-vis spectroscopic measurements. Initially, a novel and scalable method to unsettle van der Waals bonds in bulk TMDs to prepare …

Application Of Artificial Neural Networks In The Drilling Processes: Can Equivalent Circulation Density Be Estimated Prior To Drilling?, Husam Hasan Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman, David Lian

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

As the drilling environment became more challenging nowadays, managing equivalent circulating density (ECD) is a key factor to minimize non-productive time (NPT) due to many drilling obstacles such as stuck pipe, formation fracturing, and lost circulation. The goal of this work was to predict ECD prior to drilling by using artificial neural network (ANN). Once ECD is recognized, the crucial drilling variables impact ECD can be modified to control ECD within the acceptable ranges. Data from over 2000 wells collected worldwide were used in this study to create an ANN to predict ECD prior to drilling. Into training, validation, and …

A Characterization Of Different Alkali Chemical Agents For Alkaline Flooding Enhanced Oil Recovery Operations: An Experimental Investigation, Sherif Fakher, Hesham Abdelaal, Youssef Elgahawy, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Alkaline injection is a chemical enhanced oil recovery method that is used to increase oil recovery by reacting with the crude oil and creating an in situ surfactant. Many chemical agents can be used as an alkali during injection all of which have several advantages and disadvantages. This research focuses on the innate properties of three alkali agents and their ability to alter pH and temperature downhole. Alkali solutions were prepared with five different concentrations including 0.2, 1, 2, 3, and 4 wt%. The impact of varying the alkali concentration, monovalent cations manifested in sodium chloride, and divalent cations manifested …

Silver-Based Microbial Check Valve For Spacecraft Potable Water Systems, Tanner Burns

Chemical Engineering Undergraduate Honors Theses

As human space exploration increases, the development of a more efficient potable water treatment system suited for spacecraft becomes crucial. This Waste-management Education Research Consortium (WERC) challenge was designed to explore the viability of microbial control through the utilization of silver ions as a biocide for possible integration into the Tranquility Node 3 water purification system aboard the International Space Station (ISS). Current systems using iodine risk causing hyperthyroidism from overexposure; however, silver can be safely ingested without this side effect. After researching silver delivery methods including electrochemical ion production, controlled release, or a combination of the two, our team …

Theoretical Investigations Of The Electronic, Magnetic, And Thermoelectric Properties Of Transition-Metal Based Compounds, Haleoot Edaan Raad

Graduate Theses and Dissertations

The electronic, magnetic, and thermoelectric properties of transition-metal based compounds were investigated by using the density functional theory and Boltzmann transport formalism. It was found that the Co-based Heusler compounds and InSe monochalcogenide are among the materials that may be used for future thermoelectric devices. Furthermore, the investigation showed that the quaternary Heusler compounds, such as, CoFeYGe, where Y is Ti or Cr, are half-metallic ferromagnetic materials with full electron spin polarization. The lattice thermal conductivity (κL) was found to decrease for these alloys as the temperature increases. The present investigation indicated that the phonon optical modes have a major …

Non-Invasive Detection And Assessment Of Coronary Stenosis From Blood Mean Residence Times., Javad Hashemi

Electronic Theses and Dissertations

Coronary artery stenosis is an abnormal narrowing of a coronary artery caused by an atherosclerotic lesion that reduces lumen space. Fractional flow reserve (FFR) is the gold standard method to determine the severity of coronary stenosis based on the determination of rest and hyperemic pressure fields, but requires an invasive medical procedure. Normal FFR is 1.0 and FFR RT, to account for varying volume and flow rate of individual segments. Blood_RT was computed in 100 patients who had undergone the pressure-wire FFR procedure, and a threshold for Blood_RT was determined to assess the physiological significance of a stenosis, …

Vastly Extended Drug Release From Poly(Pro-17Β-Estradiol) Materials Facilitates In Vitro Neurotrophism And Neuroprotection, Anthony R. D'Amato, Devan L. Puhl, Samuel A.T. Ellman, Bailey Balouch, Ryan J. Gilbert, Edmund F. Palermo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Central nervous system (CNS) injuries persist for years, and currently there are no therapeutics that can address the complex injury cascade that develops over this timescale. 17β-estradiol (E2) has broad tropism within the CNS, targeting and inducing beneficial phenotypic changes in myriad cells following injury. To address the unmet need for vastly prolonged E2 release, we report first-generation poly(pro-E2) biomaterial scaffolds that release E2 at nanomolar concentrations over the course of 1–10 years via slow hydrolysis in vitro. As a result of their finely tuned properties, these scaffolds demonstrate the ability to promote and guide neurite extension ex vivo and …

Polyball: A New Adsorbent For The Efficient Removal Of Endotoxin From Biopharmaceuticals, Sidharth Razdan, Jee-Ching Wang, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

The presence of endotoxin, also known as lipopolysaccharides (LPS), as a side product appears to be a major drawback for the production of certain biomolecules that are essential for research, pharmaceutical, and industrial applications. In the biotechnology industry, gram-negative bacteria (e.g., Escherichia coli ) are widely used to produce recombinant products such as proteins, plasmid DNAs and vaccines. These products are contaminated with LPS, which may cause side effects when administered to animals or humans. Purification of LPS often suffers from product loss. For this reason, special attention must be paid when purifying proteins aiming a product as free as …

Functional Importance Of Lipin Phosphorylation, Stephanie Elizabeth Hood

Graduate Theses and Dissertations

Highly conserved throughout evolution, lipins are dual functioning proteins found from yeast to humans. Functioning in the cytoplasm as phosphatidate phosphatase enzymes (PAP), lipins produce diacylglycerol that serves as a precursor for neutral fats and membrane phospholipids. Alternatively, nuclear lipins are responsible for the regulation of metabolic genes. Interestingly, both the mammalian lipin 1 paralog and the single Drosophila Lipin ortholog are highly phosphorylated proteins. Target of rapamycin (TOR) has previously been identified as one of the kinases that controls the subcellular localization of both lipin 1 and Drosophila Lipin. However, other serine and threonine kinases are predicted to be …

Stabilization Of Bimodal Colloidal Systems Via Nanoparticle Haloing In Microgravity., Luke Hawtrey

Electronic Theses and Dissertations

Colloidal suspensions typically contain a multi-phase system of solid particles suspended in a liquid medium. Colloids are widely used in industrial applications such as inks, paints, motor oils, foods, cosmetics, and many more. Colloidal systems are typically formed by the interaction of the attractive van der Waals forces and one or more repulsive forces. These repulsive forces include electrostatic repulsion, steric hindrance, and nanoparticle haloing. Nanoparticle Haloing (NPH) is a phenomenon discovered in 2001 as a viable method to stabilize colloidal systems of uncharged silica microparticles using highly charged zirconia nanoparticles. For this thesis the effects of NPH were tested …

Design Of A System For Inexpensive Underwater Fiber Optic In Vivo Imaging And Mass Balance Accounting Of Tissue Engineering Candidates, Nicole Melissa Bueno Guerrero

Theses and Dissertations

The goal of this project is to create a prototype bioreactor that mimics a cell’s microenvironment. The ultimate goal is to set up an array of 36 bioreactors in parallel and monitor them with an array of sensors that will enable full mass and energy balance accounting and in vivo imaging. This thesis will analyze the various options available for cell imaging, as well as describe the construction of a bioreactor design in which cell images can be obtained without removing the cells from the bioreactor. The hypothesis for this project is that imaging of unstained cells in an aquarium …

Multi-Scale Assessment Of Binding Geometries And Energetics Of Aqueous Phase Reforming Of Glycerol And Methanol: Towards Realistic, Accurate, And Computationally Tractable Strategies, Tianjun Xie

All Dissertations

No abstract provided.

Applications Of Ionic Liquids In Membrane Separation, Mohanad Kamaz

Graduate Theses and Dissertations

Ionic liquids represent an emerging attractive material in membrane technology. The central theme of this doctoral dissertation is to develope novel membranes using ionic liquids. Two different approaches were used to prepare ionic liquid membranes including the immobilization of ionic liquid within the membrane pores or the use of pressure assembly method to deposit a selective ionic liquid layer on the top membrane surface.

In chapter 2, imidazolium ionic liquids with three different alkyl halides were successfully synthesized and used to prepare supported ionic liquid membranes (SILMs). SILMs preraper were tested for aqueous and nonaqueous applications. For nonaqueous applications, the …

Development Of A Comsol Microdialysis Model, Towards Creation Of Microdialysis On A Chip With Improved Geometries And Recovery, Patrick Pysz

Graduate Theses and Dissertations

Microdialysis (µD) sampling is a diffusion-limited sampling method that has been widely used in different biomedical fields for greater than 35 years. Device calibration for in vivo studies is difficult for current non-steady state analytes of interest correlated with both inflammatory response and microbial signaling molecules (QS); which exist in low ng/mL to pg/mL with molecular weights over a wide range of 170 Da to 70 kDa. The primary performance metric, relative recovery (RR), relating the collected sample to the extracellular space concentration varies from 10% to 60% per analyte even under controlled bench-top conditions. Innovations in microdialysis device design …

Feasibility Analysis Of Adipic Acid Production, Serpil Unlu

Department of Chemical and Biomolecular Engineering: Dissertations, Theses, and Student Research

Adipic acid is an essential intermediate chemical feedstock for the production of nylon-6,6; hence it is valuable from an industrial perspective. Currently, commercial adipic acid production includes a combination of two stages. The first stage produces a mixture of cyclohexanone and cyclohexanol called ‘’KA oil” derived from cyclohexane. In the second stage, KA oil is reacted with nitric acid to produce adipic acid. The second stage generates excess N₂O emission, which is considered as 310 times more potent than CO₂. Renewable feedstocks that can be converted to value-added chemicals offer significant potential for the necessary transition …