Chemical Engineering Commons^™

Analysis Of Aluminum-Air Battery By Physics-Based Mathematical Model, Chong Zhou

Graduate Research Theses & Dissertations

The demand of electrical energy system is increasing rapidly these days for diverse applications from portable electronics and electrical vehicles to grid-scale energy storage. Lithium-ion battery has been utilized for most of those applications, but due to high cost (about $600/ kWh) and lower energy density (0.37 kWh/kg), the advent of low cost and high performing battery system is required. In this study, we will revisit aluminum-air battery as a promising system which has excellent features such as high energy density of 2.8 kWh/kg, low cost, and safe in nature, but it was abandoned due to challenging issues. One of …

Ca2+/Calmodulin-Dependent Protein Kinase Ii Activity And Expression In The Aged Mouse Hippocampus, James Mitchum

Honors Theses

CaM Kinase II (Ca2+/calmodulin-dependent protein kinase II) is a serine/threonine-specific protein kinase enzyme that acts as a critical regulator of learning and memory. It has previously been shown that the inability of CaMKII to maintain activation is connected to memory deficits within the aging brain. While the connection between CaMKII dysfunction and learning and memory impairments is well established, little is known about the changes that cause CaMKII dysfunction. Our research set out to investigate if CaMKII is altered during the process of aging. Specifically, we looked at activity, regulation, and stability by conducting experiments to quantify CaMKII levels of …

Onsager Reciprocal Relations: Microscopic (Onsager) Or Macroscopic (Sliepcevich), R. E. "Buddy" Babcock

Chemical Engineering Faculty Publications and Presentations

This paper is a combination of the discussion of two nineteenth century theoretical giants Lars Onsager and C. M. Sliepcevich, their works in general, and specifically the famous reciprocal relations of Onsager with respect to irreversible thermodynamics. Emphasis is placed on their penetrating depth and breadth of analysis so inherently necessary in their problem-solving endeavors. The landscape of their work will be laid out for the reader by a comparison of Onsager’s microscopic statistical mechanics derivation of the famous reciprocal relationships and a macroscopic thermodynamic derivation published by C. M. Sliepsevich that led to considerable discussion in the literature in …

Dna Sequence Mediates Apparent Length Distribution In Single-Walled Carbon Nanotubes, Mohammad Moein Safaee, Mitchell Gravely, Caroline Rocchio, Matthew Simmeth, Daniel E. Roxbury

Chemical, Biomolecular, and Materials Engineering Faculty Publications

Single-walled carbon nanotubes (SWCNTs) functionalized with short single-stranded DNA have been extensively studied within the last decade for biomedical applications due to the high dispersion efficiency and intrinsic biocompatibility of DNA as well as the photostable and tunable fluorescence of SWCNTs. Characterization of their physical properties, particularly their length distribution, is of great importance regarding their application as a bioengineered research tool and clinical diagnostic agent. Conventionally, atomic force microscopy (AFM) has been used to quantify the length of DNA-SWCNTs by depositing the hybrids onto an electrostatically charged flat surface. Here, we demonstrate that hybrids of DNA-SWCNTs with different oligomeric …

Simulating The Effects Of Co2 Gas Influx On The Thermodynamic Conditions Inside A Marine Riser Filled With Oil Based Mud, Hassan Al Dawood

Honors Capstones

No abstract provided.

Zwitterionic Polymer For Drug Delivery Applications, Yang Lu

Wayne State University Dissertations

This dissertation focuses on the applications of zwitterionic polymer materials in drug delivery. In one project, zwitterionic polymer was used to construct micelle surfactants. The zwitterionic micelles were found to have an ultralow critical micelle concentration (CMC). Potential mechanism for zwitterionic micelles achieving the ultralow CMC property has been studied. Based on the ultralow CMC feature, zwitterionic micelles were used to prepare a formulation of commercial antitumor drug docetaxel, and the resulting formulation showed excellent antitumor performance. In another project, zwitterionic polymer was used to modify protein drug insulin via conjugation reaction. Compared with current protein modification methods, such as …

Cfd/Fea Of A Steam Methane Reforming Tube, Matthew Wegener

Research Opportunities for Engineering Undergraduates (ROEU) Program 2017-18

Steam methane reforming is the primary method by which hydrogen is produced; increased efficiency in hydrogen production could enable hydrogen’s usage as an alternative fuel. The objectives of this project are to construct a robust CFD/FEA model of a steam methane reforming tube, and to perform CFD/FEA analysis in both steady and transient operational states, comparing thermal stresses/strains in the tube wall in the two states and relating tube stresses/strains to properties of the process controller.

Molecular Dynamics Simulation Of Polymer Nanocomposites In Extreme Environments, Farzin Rahmani

Electronic Theses and Dissertations

In this dissertation, lower length scale phenomena associated with the responses of hybrid materials to harsh and extreme environments were studied. The goal of this research was to reveal the underlying mechanisms of damage mitigation in these materials and the role that interface, and relevant material component interactions play in the overall material response. First, the thermal decomposition behavior of a technologically important material system, i.e., pristine graphene (PG) and graphene oxide (GO) reinforced poly(ethylene oxide) (PEO), was investigated using a reactive molecular dynamics simulation methodology. The simulations were performed in both non-isothermal (dynamic gravimetric) and isothermal modes of decomposition. …

Title: Investigation Of Oxidative Reduction Reactions In Carbon-Based Electrocatalysts Presentation, Andrew Mason, Siamak Nejati, Shayan Kaviani

UCARE: Research Products

The expense of commonly used electrocatalysts such as Platinum and Palladium, make many battery technologies and electrochemical reactions cost-prohibitive. A new group of promising low-cost catalysts is doped carbon complexes. These materials need further development to reach the same activity as traditional catalysts. But by examining the Oxidative Reduction Reactions (ORR) of various carbon complexes, desirable characteristics and geometries can be identified and enhanced. For this comparative analysis, a series of Carbon Nanotube (CNT) and Graphene Complexes were tested.

Hydrodeoxygenation Of Acetic Acid Using Monometallic And Bimetallic Catalysts Supported On Carbon, José Luis Contreras Mora

Theses and Dissertations

Heterogeneous catalytic hydrodeoxygenation (HDO) of biomass-derived feeds is a deoxygenation process that is of highly interest. Carboxylic acids are one of the main components of bio-oils and acetic acid is one of the most abundant of these carboxylic acids. This acid is rich in oxygen, therefore a lot of research to produce fuel and other valuable chemicals such as ethanol is of interest.

This dissertation explores the gas-phase catalytic HDO of AA over catalysts supported on activated carbon (Cp-97). Temperature-dependent conversion and selectivity were studied at 1 atm from 200-400⁰C with an AA concentration of 1.1% and 20% …

Spectrally-Selective Energy-Harvesting Solar Windows For Public Infrastructure Applications, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam

Research outputs 2014 to 2021

A study of photovoltaic solar window technologies is reported and it focuses on their structural features, functional materials, system development, and suitability for use in practical field applications including public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 Wp/m2 from clear and transparent large-area glass-based solar windows.

Formation Of Deposits From Heavy Fuel Oil Ash In An Accelerated Deposition Facility At Temperatures Up To 1219 °C, Robert Laycock, Thomas H. Fletcher

Faculty Publications

Some industrial gas turbines are currently being fired using heavy fuel oil, which contains a small percentage of inorganic material that can lead to fouling and corrosion of turbine components. Deposits of heavy fuel oil ash were created in the Turbine Accelerated Deposition Facility (TADF) at Brigham Young University under gas turbine-related conditions. Ash was produced by burning heavy fuel oil in a downward-fired combustor and collecting the ash from the exhaust stream. This ash was then introduced into the TADF and entrained in a hot gas flow that varied from 1101 °C to 1219 °C. Sulfur dioxide was introduced …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters tau_i, i = 1, 2, . . . ,K. The characteristic quasipolynomial of such an equation is a multilinear function of exp(-tau_i s). It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delayper- scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence …

Strong Stability Of A Class Of Difference Equations Of Continuous Time And Structured Singular Value Problem, Qian Ma, Keqin Gu, Narges Choubedar

SIUE Faculty Research, Scholarship, and Creative Activity

This article studies the strong stability of scalar difference equations of continuous time in which the delays are sums of a number of independent parameters τi, i = 1, 2, . . . , K. The characteristic quasipolynomial of such an equation is a multilinear function of e−τis. It is known that the characteristic quasipolynomial of any difference equation set in the form of one-delay-per-scalar-channel (ODPSC) model is also in such a multilinear form. However, it is shown in this article that some multilinear forms of quasipolynomials are not characteristic quasipolynomials of any ODPSC difference equation set. The equivalence between …

Carbon Black Production, Analyzing And Characterization, Shadha Khalid Jebur

Masters Theses

"Carbon black (CB) plays a significant function in the development of the electrical and mechanical properties of high performance for a tough elastic polymeric substance such as rubber materials. Thus, CB is widely used to manufacture a massive number of products such as reinforcing and pigment phase in automobile tires due to its high ability to increase tire life by reducing the thermal damage. This material is also used in belts, hoses, and other non-tire rubber goods. Before use in valuable materials. CB should first be analyzed and characterized by different instruments to obtain its mechanical properties. A new thermal …

Ceria Nanostructured Catalysts For Conversion Of Methanol And Carbon Dioxide To Dimethyl Carbonate, Jawad Hassan A Al Drwish

Masters Theses

"In this study, three different shapes of ceria (CeO₂) nanostructures (e.g., nanooctahedra, nanocubes and nanorods) were synthesized via the hydrothermal method and screened for carbonylation reaction. Of these three shapes of nanostructures, the nanorod was doped with metals such as Ca, Ni, Cu, and Co by wet impregnation method. All materials were characterized by XRD, NH₃/CO₂-TPD, XRF, FTIR and N₂ physorption to determine the crystal size and phases, acid-base properties, metal loading, and surface properties. The obtained materials were employed as catalysts for the activation of Carbon Dioxide (CO₂) and methanol …

Fluid Flow In A Krogh Cylinder: A Model For A Single Capillary And Surrounding Tissue, Xianjie Qiu

Masters Theses

"A model describing the flow of plasma from the capillaries to the interstitial space in the extravascular tissue and back into the capillaries is constructed and solved. The flow through the tissue or the interstitial spaces is described by the Brinkman equation for porous medium, modified to account for the presence of cells considered as spheres. The flow of blood through the capillaries is considered to be that of a Newtonian fluid. The flow between capillary and tissue is coupled by the permeability of the capillary wall. The nature of flow and its magnitude was found to be highly dependent …

Monobore Completion Design: Classification, Applications, Benefits And Limitations, Anwar Khaled Al-Fadhli

Masters Theses

"A monobore completion is a simple completion design that uses the same internal diameter from the bottom of the well to surface. This may be accomplished by cementing a string of casing in a well, or by having tubing stabbed into a polished bore receptacle on a casing liner the same size as the tubing. Monobore completions have been applied extensively in oil and gas fields around the world, both onshore and offshore, from very low reservoir flow to extremely high production rates, since the late 1980s. They have proven beneficial due to their simplicity and cost savings. This study …

Effect Of Variation Of Parameters On Biogas Production Using Aspen Plus & Dynamic Simulation Using Mimic, Shruti Shrikant Karambelkar

Masters Theses

"Design and management for Biogas production have gained significance in growing dependency on Renewable energy resources. This would need a detailed information on steady state and dynamic behavior of systems. In order to make this process environmentally ecofriendly, its needs a lot of improvisation on process simulation. Anaerobic digestion helps treat this inefficient water to be converted into water fit for effluent purposes.

Byproducts contain consists of organic, inorganic and wastes which lead to a high COD content and thus, cannot be discarded into the outlets. The anaerobic digestion process. A study of these effects with simulation need to be …

New Wellbore-Integrity Classification For Gas Migration Problems And New Cement Formulations Using Graphene Nano Platelets To Prevent Gas Migration Through Cement, Mohammed Mousa M. Alkhamis

Masters Theses

"Gas migration, one of the primary problems related to the integrity of oil wells, is caused by cement failures. Gas migration can result in costly well repairs and may endanger personal, equipment, and result in severe operational difficulties and environmental issues. The ultimate objectives of this research were to provide a comprehensive review of the problem and to provide a solution to the problem using Graphene Nano Platelets (GNPs).

An intensive review was performed to understand the cement failures. The reasons behind these failures were analyzed and classified with respect to their locations in the wellbore. Recommendations and potential solutions …

Recycling Effect In Expanded Granular Sludge Bed Reactor And Implementation Of Six Sigma In A Methane Generation Process, Manohar Manchenahalli Shivashankaraiah

Masters Theses

"Brewery industries are the largest consumers of water among several production industries. Despite consuming these huge amounts of water and electricity, they generate by-products that are harmful to the environment. These by-products contain organic, inorganic, and solid wastes with high chemical oxygen demand (COD) strength. The anaerobic digestion (AD) process plays an important role in treating this wastewater. This study investigates the design and development of an expanded granular sludge bed reactor (EGSB) effluent recirculation, which can achieve high COD removal efficiency of the wastewater and enhance the efficiency of generating biogas with high yields and increases in the concentration …

Numerical Simulation Study Of Factors Affecting Production Well Gel Treatment Using Linear Models With Crossflow, Kewei Shi

Masters Theses

"Conformance control is an inevitable topic related to water-flooding. Polymer gel has been proved to enhance oil recovery by blocking the existing water-breakthrough channels. Water that is injected subsequently will be directed to the unswept portion of the reservoir, replacing part of the remaining oil and increasing the oil-recovery factor. Prior to pilot tests of polymer gel treatment, laboratory experiments and numerical simulations are used to design the tests. Understanding physical meanings of key parameters that affect polymer gel treatment and relating the parameters from lab data and the simulator benefit field operation design.

This thesis study tries to evaluate …

Cellular Hitchhiking Via Injectable Microparticles, Daniel Smith

Masters Theses

"Tissue engineering is a process of developing new tissues in a host. Tissue engineering draws upon revitalizing damaged tissues that otherwise would not heal completely from the body's natural response. To augment the body's natural response to impairment, cells can be transplanted to the afflicted area to boost the healing response. Implementing these cells onto scaffolds and transplanting them into the body improves the healing response dramatically. Tissue regeneration improves when a biodegradable scaffold is used in conjunction with cells to augment the body's healing response. Microparticles provide a surface that can mimic the environment cells perceive in vivo, …

The Development Of A New Formulation Of Fly Ash Class C Based Geopolymer And Assessing Its Performance In Presence Of Drilling Fluid Contamination, Mohamed Saad Ahdaya

Masters Theses

"Cementing is one of the most critical steps in the drilling and completion of oil wells. Traditionally, Portland cement is used for oil cementing operations; however, geopolymer materials have recently attracted much attention because they are more cost-effective and have less environmental impacts.

An intensive laboratory work was conducted to obtain a new formulation of fly ash class C based geopolymer cement to be used as a potential alternative cementing material to Portland cement in oil and gas cementing. Twenty-four variations of fly ash class C based geopolymers were prepared, and by comparing several of their properties using API standard …

New Nanoparticle Water-Based Drilling Fluid Formulation With Enhanced Thermal Stability And Inhibition Capabilities In The Woodford Shale, Jose Aramendiz Pacheco

Masters Theses

"Drilling fluid design for unconventional reservoirs aims at preventing formation instability problems associated with fluid invasion, shale swelling, and cuttings dispersion. Although oil-based mud (OBM) can be used to achieve these goals, environmental and economic concerns limit its application. This experimental study evaluated the potential use of nanoparticles (NP) to improve water-based mud (WBM) inhibition capabilities and its ability to enhance the overall drilling fluid thermal stability while providing a cleaner technology to the industry.

Characterization of Woodford shale was completed with X-ray diffraction, cation exchange capacity, and scanning electron microscopy, silica, and graphene NP were characterized with aqueous stability …

Investigation Of Proppant Static Settling Velocity In Hydraulic Fractures Using Viscoelastic Linear Gel, Vismay Manishbhai Shah

Masters Theses

"Few studies have quantified proppant transport in static conditions using actual proppant and validated previously established correlation. The objective of this study is to investigate the rheological properties of the linear gel, and determine the effect of size, shape and specific gravity of the proppant, fracture walls and rheological properties of the fluid on the proppant settling velocity in static condition and validate the previously established correlation.

Shear viscosity and dynamic frequency sweep tests were performed to investigate the viscous and viscoelastic behaviour of the HPG linear gel with five different concentrations. Proppant settling experiments were conducted with different proppant …

Conical Folds -- An Artifact Of Using Simple Geometric Shapes To Describe A Complex Geologic Structure, Avery Joseph Welker

Masters Theses

"Accurate representation of the 3D shapes of natural folds is essential to characterization of the dynamic models for fold formation. Geometrical analysis of folds commonly relies upon analyzing patterns defined by the variation in the orientation of poles to planar surfaces deformed by a shortening event when plotted using graphical calculators (e.g., stereogram, polar tangent diagrams) to interpret the shape of folds. Stereograms for which orientation data define small circles are classified as non-cylindrical regular folds and are interpreted as "conical folds," where the shape of the fold is represented by a cone that terminates at a point. Utilizing similar …

Characterization Of Free-Radical Solution Polymerizations Of Acrylamide Initiated By Persulfate Initiator Systems, Yashu Chen

Masters Theses

”In order to reduce the water production and improve the oil recovery of mature reservoir, various conformance control technologies have been extensively developed. Preformed particle gel (PPG), a cost-effective plugging agent, has been successfully applied to block the high permeability zone and thus to displace the water to up-swept zone.

A common PPG based on polyacrylamide hydrogel have been wildly used. Identifying the parameters that affect gelation performance and understand how these parameters affect the performance is very useful to predict and manipulate the gelation time and to control the performance of gels.

The objective of this research is to …

Removal Of Mixed Vocs Of Benzene, Toluene, And Xylene By Using Catalytic Corona Discharge System, Issaree Tantiprapa

Chulalongkorn University Theses and Dissertations (Chula ETD)

Silver (Ag) and Manganese (Mn) catalysts were loaded on TiO₂ and Al₂O₃ supports on quartz wool that were tested for the oxidation of mixed Volatile Organic Compounds (VOCs) of benzene, toluene, and xylene in nonthermal plasma corona discharge. The total feed concentration of VOCs was fixed at 100 ppm. The catalyst located between the pin and plate electrodes with a constant gap distance of 15 mm and the pin and plate plasma reactor had an inside diameter of 9 mm. The outlet stream was analyzed by gas chromatography equipped with TCD and FID detectors. The operating parameters including applied voltage, …

Catalytic Applications Of Cuo Loaded Mesoporous Ceo₂ And Cuo Loaded Mesoporous Ceo₂-Zro₂ Catalyst, Sureerat Jampa

Chulalongkorn University Theses and Dissertations (Chula ETD)

Copper oxide (CuO) loaded mesoporous ceria (CeO₂) and Copper oxide (CuO) loaded mesoporous ceria-zirconia (CeO₂-ZrO₂) catalysts are successfully synthesized for preferential oxidation of CO (CO-PROX) and autothermal steam reforming of methanol (ASRM). Mesoporous CeO₂ and mesoporous CeO₂-ZrO₂ as catalyst supports with high specific surface area and ordered structure are prepared via a nanocasting process by using MCM-48 as template. Deposition-precipitation technique is chosen to load various Cu contents (1 to 9 wt.%) on the synthesized mesoporous supports. The synthesized CuO loaded mesoporous CeO₂ (Cu-C) and CuO loaded mesoporous CeO₂-ZrO₂ (Cu-CZ) catalysts are characterized by N₂ adsorption-desorption, X-ray diffraction, transmission electron …