Chemical Engineering Commons^™

The Development Of A Pore Pressure And Fracture Gradient Prediction Model For The Ewing Banks 910 Area In The Gulf Of Mexico, Jeffrey Steven Fooshee

LSU Master's Theses

The purpose of this project is to develop a pore pressure and fracture gradient prediction strategy for the Ewing Banks 910 (EW 910) area. Petrophysical and measured pressure data for eight wells previously drilled in the EW 910 area will be examined and reviewed. This strategy will help design future drilling and completion operations in the aforementioned area. Two pore pressure prediction strategies and one fracture gradient prediction strategy will be reviewed and applied to the available data. The first pore pressure prediction strategy reviewed was developed by W. R. Matthews. This strategy utilizes a geologic age specific overlay which …

Sialic Acid Conjugated Chitosan For The Attenuation Of Amyloid-Beta Toxicity, Dhruva Dilip Dhavale

LSU Master's Theses

Amyloid-beta (Aβ), a 39 to 43 amino acid long peptide, is the primary species identified in senile plaques associated with Alzheimer’s disease (AD) and has been implicated in the neurotoxicity associated with AD. It is believed that Aβ toxicity is mediated through the interaction with neuronal membranes. A variety of evidence indicates that 1) Aβ may bind to the cell surface sialic acids, 2) the affinity of this interaction is higher if the gangliosides or sialic acids on the cell surface are clustered, 3) the removal of the surface sialic acids attenuate Aβ toxicity. Based on this data, we hypothesized …

Transition Metal Catalysts For Hydrodesulfurization Reactions Applied To Petroleum Industry, Brenda Torres

Open Access Theses & Dissertations

Catalysis plays a fundamental role in petroleum refining and basic petrochemical industries creating new routes in the development of industrial processes. Moreover, catalysis has become indispensable to the solution of environmental pollution problems and therefore on public health. World wide concerns for preservation of the environment has motivated the development of "Green" catalyst based technologies, to achieve a better utilization of petroleum resources and demands for cleaner transportation fuels. These environmental concerns have led to increasingly drastic regulations on sulfur, nitrogen and aromatics content in fuels. Sulfur content in the motor and diesel fuels is continuously reduced by regulations to …

An Infrared Imaging Method For High-Throughput Combinatorial Investigation Of Hydrogenation-Dehydrogenation And New Phase Formation Of Thin Films, H. Oguchi, Jason R. Hattrick-Simpers, I. Takeuchi, E. J. Heilweil, L. A. Bendersky

Faculty Publications

We have developed an infrared imaging setup enabling in situ infrared images to be acquired, and expanded on capabilities of an infrared imaging as a high-throughput screening technique, determination of a critical thickness of a Pd capping layer which significantly blocks infrared emission from below, enhancement of sensitivity to hydrogenation and dehydrogenation by normalizing raw infrared intensity of a Mg thin film to an inert reference, rapid and systematic screening of hydrogenation and dehydrogenation properties of a Mg–Ni composition spread covered by a thickness gradient Pd capping layer, and detection of formation of a Mg₂Si phase in a …

Carbon Dioxide Capture From Flue Gases, Mohamed Rashid Al Rashid

Theses

Global warming and climate change are believed to be caused by the greenhouse effect. CO₂ has been regarded as the main contributor to global climate change which directly results in serious environmental problems. Half of the anthropogenic CO₂ emission sources are emitted from the combustion of fossil fuels in industries and power plants worldwide. The absorption behavior of Carbon dioxide from flue gases can be studied using conventional absorber and polymeric hollow fiber membrane contractors. An industrial absorber data was compared with simulated data using hollow fiber membrane contractor using the gPROMs software package. In this analysis, with …

Inhomogeneous Degradation Of Polymer Electrolyte Membrane In Pem Fuel Cells, Xinyu Huang, Wonseok Yoon

Faculty Publications

Membrane durability is one of the technical barriers for the commercialization of polymer electrolyte membrane (PEM) fuel cells. Membrane embrittlement (a form of mechanical weakening) can lead to the frequently observed “sudden death” behavior of PEM fuel cells. It is the objective of this study to explore the fundamental mechanisms of the mechanical weakening of perfluorosulfonic acid (PFSA) based electrolyte membranes during the accelerated degradation test.

Sulfur Dioxide Crossover During The Production Of Hydrogen And Sulfuric Acid In A Pem Electrolyzer, John A. Staser, John W. Weidner

Faculty Publications

A proton exchange membrane (PEM) electrolyzer has been investigated as a viable system for the electrolysis step in the thermochemical conversion of sulfur dioxide to sulfuric acid for the large-scale production of hydrogen. Unfortunately, during operation, sulfur dioxide can diffuse from the anode to the cathode. This has several negative effects, including reduction to sulfur that could potentially damage the electrode, consumption of current that would otherwise be used for the production of hydrogen, introduction of oxygen and SO₂ to the hydrogen stream, and loss of sulfur to the cycle. However, proper water management can reduce or eliminate the …

The Effect Of Copt Crystallinity And Grain Texturing On Properties Of Exchange-Coupled Fe/Copt Systems, H. Oguchi, A. Zambano, M. Yu, Jason R. Hattrick-Simpers, D. Banerjee, Y. Liu, Z. L. Wang, J. P. Liu, S. E. Lofland, D. Josell, I. Takeuchi

Faculty Publications

The effect of the crystallinity and the grain texturing of CoPt hard layers on exchange coupled Fe/CoPt soft/hard magnetic systems was studied using gradient thickness multilayer thin films. We have studied the hard layer structures by transmission electron microscopy and x-ray diffraction, and characterized the exchange coupling interaction through magnetization loops obtained by the magneto-optical Kerr effect measurement. We found that exchange coupling strongly depends on the crystalline characteristics of the CoPt hard layer. There is correlation between the mixture of different grain orientations of the CoPt hard layer and coupling efficiency. In particular, interlayer coupling is enhanced when there …

Estimation Of The Flammability Zone Boundaries With Thermodynamic And Empirical Equations, Travis Joseph Hansen

Dissertations, Master's Theses and Master's Reports - Open

The flammability zone boundaries are very important properties to prevent explosions in the process industries. Within the boundaries, a flame or explosion can occur so it is important to understand these boundaries to prevent fires and explosions. Very little work has been reported in the literature to model the flammability zone boundaries. Two boundaries are defined and studied: the upper flammability zone boundary and the lower flammability zone boundary. Three methods are presented to predict the upper and lower flammability zone boundaries:

The linear model

The extended linear model, and

An empirical model

The linear model is a thermodynamic model …

Protein Responsive Synthetic Materials For Biomedical Applications, Youyou Zheng

Doctoral Dissertations

"The production of synthetic materials with molecular recognition abilities towards biomacromolecules has been widely researched because of its potential applications in separations, sensing, therapeutics, etc. While molecular imprinting has become a commercially viable method for the production of synthetic materials with molecular recognition abilities towards small molecules, little success has been recorded towards protein targets. Proteins are difficult to imprint as they present a number of epitopes for imprinting, are difficult to remove from the completed material, and are incompatible with the densely crosslinked structures required. As a result, a novel surface molecular imprinting technique was developed to synthesize polymeric …

Tem Study Of Niobium Surfaces Treated By Different Polishing Techniques, A.T. Wu, D. Gu, Helmut Baumgart

Electrical & Computer Engineering Faculty Publications

TEM cross-section observation on Nb surfaces has been a challenge to our superconducting radio frequency (SRF) community due to the highly reactive nature of Nb. Although it was demonstrated in an early attempt1 that under a suitable sample preparation procedure reasonably clear cross-section images of Nb could be obtained, to the best of our knowledge good atomically resolved images had never been obtained. In this report, it is shown that by modifying the sample preparation procedure adopted in reference 1 it is possible to obtain good cross-section images of Nb surfaces with atomic resolution routinely. Surface atomic structures of Nb …

Photocatalytic Reaction In Monolithic Optical Fiber Reactor With Inverse Opal Catalyst, Maoming Ren

LSU Doctoral Dissertations

The development of photocatalytic reactor is essential for the successful application of heterogeneous semiconductor in environmental study, which has been shown to be photoactive and effective to oxidate organic pollutant and photoreduce CO2 to useful compounds. In this dissertation, a monolithic optical fiber reactor (MOFR) coated with inverse opal titania, which uses optical fibers as light-transmitting conductor and support of catalyst, was developed for both photodegradation and photoreduction. 1,2-dichlorobenzene, a volatile organic compound (VOC), was selected as the organic pollutant. This configuration of reactor and catalyst provides a high surface area, enhances mass transfer within the catalyst, manipulates photons transmission …