Chemical Engineering Commons^™

Reductive Dehalogenation Of Alkyl Iodides, Vsevolod Gruenman

Theses

The rates of reductive dehalogenation reactions of alkyl iodides with zinc and acetic acid relative to the rate of deiodination of methyl iodide were investigated.

The order of ease of replacement of the iodine for the various substituents on the carbon atom of methyl iodide was found to be;

Exploratory Study High Purity Colbalt Using An Anion Exchange Resin, Charles Edward Hoffman

Theses

This investigation accounts for the exploratory phase of a program to develop a commercial or semi-commercial process for producing high purity cobalt; in effect, a separation of cobalt and nickel.

An extensive review of all published literature, patents, etc. from 1900 to 1958 of all known commercial, semi-commercial and analytical methods of separating cobalt and nickel was completed. Qualitative evaluation of these methods to determine the possibility of one being practically extended and/or developed to produce high purity cobalt yielded one potential commercial method. Developed for analytical purposes by Moore and Kraus (1), use is made of the fact that …

Alkylation With Some Alkyl Borate By The Friedel-Crafts Methods, Richard Ernest Huber

Theses

Normal butyl, allyl, methylbutyne and 2-chloroethyl borates were synthesized in yields above 90.0% from their corresponding alcohols and boric acid. Using some of the above alkyl borates, and others commercially available, as alkylating agents, benzene was alkylated by the Friedel-Crafts method, using aluminum chloride as the catalyst. Yields were dependent on catalyst concentration. The alkyl benzenes were identified by means of: 1) physical constants, 2) infrared spectra, 3) melting points of derivatives, and 4) chemical analysis. Starting with normal alkyl borates, the formation of isomeric and dialkylated products was established through the analytical data.

Diffusion Coefficient From Hydrogen Ion Exchange Studies, Michael Maxwell Kahn, Norman A. Martin

Theses

The study of monovalent and bivalent ion diffusion coefficients was undertaken to determine the practicability of using the Reichen berg equation to calculate a film thickness from a single diffusion coefficient and through the use of this film thickness to predict the diffusion coefficient of any monovalent or bivalent ion.

Experimentation employed the use of a mixing vessel with a two bladed propellor into which a solution of known ion concentration was kept at a constant temperature and mixing speed. Dowex 50 x -8 hydrogen ion type resin was added to the solution and by means of a pH meter …

Collection Of Germanium From Acid Etch Waste By Ion Exchange, Robert Welsh Meyler

Theses

This report is an investigation of the use of ion exchange resins to recover germanium from acid etch wastes encountered in transistor manufacture.

Most of the experiments were performed with acid etch waste of unknown germanium content. The object was to determine if the ion exchange technique were applicable, and to select the most practical operating procedure.

When a satisfactory procedure had been established, later experimental runs were made with an acid etch solution of known germanium concentration to determine the yields of recovered germanium.

Yields of 60 per cent to 75 per cent recovery of germanium from the etch …

Vapor Liquid Equilibria Of Diacetone Alcohol In Various Solvents, John A. Mulligan

Theses

This paper presents the initial study of vapor-liquid equilibria data for the systems (a) diacetone alcohol-methanol (b) diacetone alcohol-ethanol and (c) diacetone alcohol-benzene at 100mm and 200mm and confirms the data reported by Hack and Van Winkle (6) on the system (d) diacetone alcohol-water at the same pressures. Margules and Redlich and Kister constants have been determined from the data, and are presented for use in future studies.

A comparison has been made between Redlich and Kister constants determined from laboratory data, and Redlich and Kister constants predicted from the physical properties of the components. Redlich and Kister constants predicted …

Enthalpies And Partial Molal Enthalpies For Methane-Carbon Dioxide System, Isaac Pass

Theses

Enthalpies and partial molal enthalpies have been calculated by a combination of analytical and graphical procedures for the methane carbon dioxide binary system at 160°F, and at pressures from 200 to 9000 psia.

Mixtures containing .0852, .19912, .3583 and .6685 weight fraction of methane in carbon dioxide, as well as the pure components were used. The method for calculation of the enthalpies was outlined by Van Ness (1) and involves the application of residuals to the Redlich-Kwong equation of state (2).

The results of this paper illustrate the value of the method as an accurate and reasonably convenient tool. Excellent …

Salt Effects On Distribution Of Fatty Acids, John Henry Sivori

Theses

Data are reported on the extraction of formic, acetic, propionic, and butyric acids from water with methyl isobutyl ketone. Prime consideration is given to the effect of an added inorganic salt, calcium chloride, and also to the effect of the presence of a common ion on the distribution of the acids in the solvent-water system. Extraction into the solvent phase is increased by the addition of calcium chloride, but only slightly affected by the addition of a common ion.

Batch Heating And Cooling Nomographs, Stephen Zakanycz

Theses

Heat transfer problems associated with batch heating and cooling processes are relatively complex since conditions of unsteady state prevail. Complex mathematical equations are available which relate the time required to heat or cool a quantity of material in a specific piece of equipment or to design heat exchangers to transfer the desired amount of heat in a specified time. By the use of alignment charts, these equations are solved graphically with speed and accuracy. Nomographs are presented for equations dealing with heating and cooling agitated batches, counterflow and nonisothermal medium for two cases: coil-in-tank or jacketed vessel and external heat …

The Volumetric Analysis Of Nitrocompounds Using Chromous Chloride, Charles Caslin Jamison

Theses

Chromous chloride has been shown to be more efficient than titanous chloride in the reduction of refractory nitro and nitramine groups in both aromatic and aliphatic compounds.

It was found that concentrated hydrochloric acid increases the efficiency of chromous chloride to a point where it would reduce the most difficult to deduce nitro-campounds.

The compounds studied were p-Nitromethylaniline, 2,4-Dinitrotoluene, 2,4-Dinitroaniline, 2,4,6-Trinitrotoluene, Nitroguanidine, I,9-Di4cetoxy-2,4,6,8-penta-methylenetetranitramine, Sym-Cyclotrimethylenetrinitrimine, and Sym-Cyclotetramethylenetetranitramine.

Heat Transfer By Natural Convection In Horizontal Fluid Layers : A Statistical Correlation Of Experimental Data, John Lawrence O'Toole

Theses

The rate of heat transfer due to natural convection in confined, horizontal, fluid layers can be expressed by equations involving the dimensionless parameters Nusselt No., Rayleigh No., and Prandtl No., where Rayleigh No. equals the product of Grashof and Prandtl Nos.

Statistical correlation by stepwise multiple regression of experimental data obtained from four different investigators, on both gases and liquids, yields three separate equations corresponding to three distinct regimes of convection. The total range spanned by the data is from the onset of convection to Rayleigh = 109.

The equations are Regime Ra Range Equation Std. Error of Estimate Initial …

The Effect Of Agitation On The Polymerization Of A Vinyl Chloride-Ethyl Acrylate Latex, Roger Wolf Rubens

Theses

The effect of agitation was studied on a 65-35 vinyl chloride-ethyl acrylate copolymer latex. Polymerizations were carried out in a 2 gallon stainless reactor with automatic control of jacket water temperature. Standard, "power calibrated" flat blade turbine impellers of 2 in., 3 in., and 4 in. diameter were used at speeds which provided an over-all range of impeller power from 0.00007 to 0.09 hp. Work on the technology of agitation, from the literature, used to characterize agitation with respect to the polymerization, was reviewed.

The investigation indicated that conversion, reaction rate, molecular weight and the stability of the emulsion were …

Fugacity And Activity Coefficients For Methane-Carbon Dioxide System, Philip John Sievering

Theses

Fugacity and activity coefficients have been calculated by a combination of analytical and graphical methods for the methane-carbon dioxide system at 100° F. for pressures up to 680 atmospheres.

Four mixtures of the two gases, methane and carbon dioxide, and the pure gases themselves were used in the calculations according to the adaptation and interpertation of the Redlich and Kwong equation of state as set forth by H.C. Van Ness (1).

The results of this thesis seem to substantiate H.C. Van Ness's paper as a convenient and accurate method of calculating thermodynamic properties of gases from experimental compressibility-factor data. Since …

Vapor Liquid Equilibria Studies For System 1: Cyclohexane, Neo-Hexane; System 2: Neo-Hexane, Iso-Octane; System 3: Cyclohexane, Iso-Octane; At Atmospheric Pressure, Robert Halper

Theses

Vapor liquid equilibria studies were conducted on three systems at atmospheric pressure. The systems represented were: -

System #1 - Neo-hexane, cyclohexane.

System #2 Neo-hexane, isooctane.

System #3 - Cyclohexane, isooctane.

The object of these studies was: -

1. To obtain reliable experimental data on the above systems that would enable the plot of a series of characteristic curves.

2. To test the experimental data for thermodynamic consistency.

3. To correlate the data with the best of several theoretical equations as represented by Van Lear, Margules, Scatchard-Hamer or Redlich-Kister.

Investigation Of Liquid Partition Chromatography Of Polyhydric Alcohols, Michael Homiak

Theses

Polyhydric alcohols have previously been separated by tedious chemical procedures and in microgram quantities on columns prepared from silica gel and silica gel - Celite combinations. This study was undertaken to determine whether separation of these alcohols was possible by chromatography on columns of Celite alone, and in quantities considerably greater than those formerly handled. In addition, as a preliminary step to the actual separation, the capacities of the columns for the two polyhydric alcohols were determined. The effect of several variables on the capacities of the columns were investigated. A calculation of the number of theoretical plates in a …

Kinetics Of Hydrolysis Of Some Halonitrobenzenesulfonates, Walter C. Kania

Theses

The object of this thesis was to determine the rela¬tive activity towards hydrolysis of several halogen deriv¬atives of nitrobenzenesulfonate. The halide is Para to a nitro group and ortho to the sulfonic acid group.

The compounds studied were:

(I) sodium 2-chloro-5-nitrobenzenesulfonate

(II) sodium 2-bromo-5-nitrobenzenesulfonate

The chlorine was found to be more reactive than the bromine.

A dichloride, (III), sodium 2,5-dichloro-3-nitroben-zenesulfonate was also studied. Here one chlorine is activated by both the nitro and sulfonic acid groups. The other chlorine being meta to the nitro and sulfonic acid groups would be adverse to hydrolysis.

Rates of hydrolysis of (I), (II), and …

Study Of The Solid-Liquid Quaternary Equilibria : The Manganous Sulfate, Ammonium Sulfate, Sodium Sulfate And Water Phase System, John Kalman Kaufman

Theses

This investigation details the Solid-Liquid Equilibria in the Quaternary phase system at 30° Centigrade of Manganous Sulfate - Ammonium Sulfate - Sodium Sulfate - Water. These three salts, with a common ion and water, are represented by the Janecke projection method and summarized in the tabulation of results.

Additional data were obtained on the applicable Ternary phase systems which were used in completing the Quaternary phase projection. The systems,

Manganous Sulfate - Ammonium Sulfate – Water

Manganous Sulfate - Sodium Sulfate – Water

Ammonium Sulfate - Sodium Sulfate – Water

are represented by the Roozeboom Equilateral Triangle mode.

This is …

Pressure Drop In Packed Beds Of Metal Raschig Rings, Donald William Davis

Theses

Absorption towers packed with split metal Raschig rings have a higher void content than towers packed with ceramic Raschig rings of the same nominal size. This increased void volume is due to the thinner wall of the metal ring. This higher void space should also result in lower pressure drops than would be encountered with ceramic rings. The purpose of this research program was to determine the pressure drop-flow characteristics of this packing, and to develop suitable correlations for design of packed absorption towers.

Split metal Raschig rings of one-half and one inch nominal sizes were tested to determine their …

Ultraviolet Analysis Of Mixtures Of O-, P- And M-Nitrotoluene, John Thomas Dempsey

Theses

This paper presents a spectrophotometric method of analysis of mixtures of the isomers of pure nitrotoluene, which are free of the dinitro-compounds and other impurities. The analysis is made in the ultraviolet region with a Beckman DU Spectrophotometer. Graphical methods are developed for both binary and tertiary mixtures. The graphs, which form the basis of the method, represent the theoretical absorbancies for various mixtures of the isomers. From these graphs the concentrations in an unknown mixture can be read directly if the absorbancies, at specified wavelengths, are known.

This analytical method is based on the fact that the absorbancies of …

Effect Of Substituents In The Reductive Dehalogenation Of Substituted Iodobenzenes, George Burton Freda

Theses

Reaction rates for the reductive dehalogenation of ortho or Para substituted iodobenzenes with zinc and acetic acid relative to the rate for unsubstituted iodobenzene were measured. The order of ease of replacement of the iodine for the para substituents on the benzene ring was found to be: -COON -SO₃K> CH₃ -H > -C₆H₅> -OC₂H₅. For ortho substituents the order was -COOH> -C₆H₅> -OC₂H₅ > -SO₃K -CH₃> -H.

Heat Transfer Coefficients Of Condensing Vapors, Carl Lennart Palmer, Thomas W. Weber

Theses

The heat transfer coefficients of the condensing vapors of n-butyl, 1-amyl, and tertiary amyl alcohols have been measured for a single horizontal tube. This is the first time that i-amyl and tertiary amyl alcohols have been investigated. The modified Wilson method presented by Chu was used in analysing the data.

Chu pointed out that over a moderate range of temperature, the condensing heat transfer coefficient should vary inversely with the one-third power of the rate of heat transfer. For the alcohols studied in these experiments, the measured powers were between 0.20 and 0.36, which are in good agreement with Chu's …

Purification Of Technical Grade Latic Acid, Edward Francis Wezowicz

Theses

A method to manufacture purified lactic acid from technical grade lactic acid 04%) was investigated. In this method, technical grade lactic acid was reacted with normal butyl alcohol, the water formed during the esterification was azeotropically removed, The ester formed, was separated from the excess butanol by vacuum distillation. Finally, the ester separated by distillation :as hydrolyzed to a purified grade of lactic acid.

In this study, several features are reported, which to the best of knowledge, appear in a publication for the first time. They are:

1. Conditions for the esterification of technical grade lactic acid with butanol, resulting …

Correlation Of Maximum Air Velocity With Liquid Entrainment Loading For Wire Mesh Mist Eliminators, Edward W. Poppele

Theses

Two styles of Initted 'wire mesh entrainment separators,or demisters were investigated to determine maximun useful air flow rates over a wide range of liquid entrainmant loadings. The demisters studiod were six-inch thickniess and constructed of 0.011 inch diameter stainless steel wire.

The expression widely used to determine allowable design velocity for gas through demisters is:

V=K/((d1, dv)/ dv) (1)

where
V = Maximum Degree gas velocity, feet per second,
K = is a constant for the system,
d= density of entrained liquid phase, pounds per cubic foot,
dv = density of gaseous phase, pounds per cubic foot.

In this work …

A Generalized Correlation For The Effect Of Pressure On The Difference In Heat Capacities Of Gases, Leon Bleich

Theses

A generalized correlation is presented for the difference in heat capacities at constant pressure and constant volume, C_p-C_v, as a function of reduced pressure with parameters of reduced temperature. The correlation covers a pressure range of pr a 0.2 to pr = 15.0 and a temperature range of Tr = 1.0 to Tr = 5.5. The correla- tion was based on values of C_p-C_v calculated from the Benedict - Webb - Rubin Equation of State for five hydrocarbons, namely, methane, ethylene, ethane, propane, and n-butane.

The results show that C_p-C_{v …}

Thermodynamic Properties Of Pentene-1, Byron Millard Cody

Theses

The thermodynamic properties of Pentene-1 have been calculated over a temperature range of 32°F to 600°F and at pressures up to 4000 lb/sq. in. abs. These properties were determined from vapor pressure, heat capacity, and latent heat of vaporization data through the application of generalized thermodymnic relationships based on the theory of corresponding states.

Evaluation Of Two Generalized Compressibility Correlations, Elbert Dale Hooper

Theses

Lydersen's critica1 compressibility correlation and Pitzer's acentric factor correlation are compared by the accuracy with which they reproduce P-V-T data. Each introduces a new parameter to be employed in conjunction with reduced temperature and reduced pressure to account for the behavior of substances of various types.

It is established here that the correlation proposed by Pitzer and co-workers is the more reliable for compressibility and saturation pressure predictions for most substances over a wider temperature and pressure range. The critica1 compressibility, however, improves compressibility predictions near the critica1 point for polar compounds.

Included are graphs and tables showing the deviations …

Ferro And Ferricyanides In Industrial Waste Water, Frederick Joseph Neff

Theses

The role of the Ferro and ferricyanides in present day waste treatment practice is reviewed. Possible conventional methods for the disposal of the compounds appear inadequate. It is shown experimentally that the cyanide content of Ferrocyanide may be oxidized by hypochlorite in alkaline solution when exposed to ultra-violet light and that no oxidation of the cyanide occurs when reacted with hypochlorite in diffuse laboratory light.

Ion Exchange Technology In The Sodium And Ferric Ion-Dowex 50 Systems, Alfred George Hoerrner

Theses

This investigation was directed toward the extension of data on the kinetics of monovalent - trivalent cation exchange and to establish data on the relationship between temperature and total capacity of an ion exchange resin. In order to compare the present study to a previous investigation by Klosowski (2), the capacity of the resin used for ferric and chromic ions was also measured.

In the kinetic study, the ferric ion-hydrogen ion exchange using Dowex 50 X-8 resin was studied in an agitated vessel. A two-bladed marine type propellor was used and the agitator speed was varied from 400 to 800 …

Adsorption Of Carbon Dioxide By Sodium Carbonate Solutions In A Gas-Bubble Column, Joseph Don Singalewitch

Theses

A study was conducted on the absorption of pure carbon dioxide by sodium carbonate-sodium bicarabonate systems in a gas-bubble column (in which bubbles, formed by passing a gas through a porous plate at the base of to column, rise up through a descending continuous liquid phase). This equipment was found to be entremely effcient, under the condtions of the experiments, covered liquid rates (9,000 to 13,000 pounds per hour per square foot) with gas rates of 30 to 60 pounds per hour or square foot. The absorption section of the column was two inches in diameter and one foot in …

Corrosion Resistance Of The Chromium-Manganese-Nickel And Chromium-Manganese Austenitic Stainless Steels, Robert Dewitt Merrick

Theses

The corrosion resistance of the chromium-manganese-nickel austenitic stainless steels has been established through a study of the available literature and unpublished data obtained from producers and users of these alloys. Several compositions are available as listed below. DESIGNATIONCOMPOSITION % CMnCrNiNAISI 2010.155.5/7.516.0/18.03.5/5.50.25AISI 2020.157.5/10.017.0/19.04.0/6.00.25CM0.1513.0/18.014.0/17.01.00.25Tenelon0.1014.517-0.40TRC0.0816.515.0 min.1.00.2CMN0.651225-0.452040.087.5/10.017.0/19.04.0/6.00.25

The AISI Type 201 and 202 alloys have been listed by the American Iron and Steel Institute.

The development and application of these alloys was necessary because of the increasing shortage of nickel and the wide use of the chromium-nickel austenitic stainless steels. The chromium-nickel steels are used in a wide variety of consumer items and are …