Chemical Engineering Commons^™

Itraconazole Nanocomposites Prepared Via Rotary Evaporator Drying Of Nanomilled Suspensions, Alexander Santos Coelho

Theses

The aim of this study is to explore the feasibility of rotary evaporation for drying wetmilled drug suspensions as a novel approach to produce drug nanocomposites that exhibit fast redispersion and immediate drug release. To this end, the physical stability of the nanomilled itraconazole (drug) suspensions, a.k.a., nanosuspensions, during the milling and storage; the drying of the itraconazole nanosuspensions via the rotary evaporator; and the type/loading of various polymers/surfactants (dispersants) on aqueous redispersion and drug release from the nanocomposites were examined. Our results suggest that smaller drug particle size, owing to nanomilling, and smaller nanocomposite particle size, owing to optimized …

Immobilized Lipase On Zif For Enhanced Biofuel Production, Reem Mohammed Al Mansouri

Theses

Enzymatic transesterification of triglycerides to produce biodiesel has been gaining increasing attention owing to its advantages over chemical processes. Being catalysts, enzymes are not consumed during the processes in which they are used. Therefore, a successful technique to allow their repeated use can significantly enhance the economic feasibility of the process. The most common approach to allow easy separation of the enzymes and to eliminate their wastage is immobilization on a support matrix. Recently, Metal-Organic Frameworks (MOFs) have been suggested as preferable support for enzyme immobilization, owing to their high-order structure and high porosity and specific surface area. This thesis …

Immobilization Of Lipase On Metal Organic Frameworks For Biodiesel Production, Reem L Husam Safwan Shoma

Theses

For the economical application of enzymatic processes in biodiesel production, lipase enzyme has to be used in immobilized form to allow easy retention and reuse. The main challenges facing the industrialization of the enzymatic process are the high mass transfer resistance, the tendency to adsorb the by-product glycerol onto the support matrix and poor operational stability. These problems can be solved by a good selection of supports of favourable surface characteristics and pore sizes. In that regard, increasing interest has recently been in Metal-Organic Frameworks (MOFs) as a new kind of porous support for enzyme immobilization. Physical adsorption, which is …

Study Of Electrodeposition Of Copper-Indium Material For Fabrication Of Cis Thin-Film Solar Cells, Leher Farooq

Theses

Abstract

Copper-Indium material for the fabrication of CIS/CIGS thin-film solar cells and for applications as an alloy is one of the most auspicious materials currently being studied and has attracted significant interest in solar energy and other industries. In the past, there have been several methods used for the fabrication of chalcopyrite thin-film solar cells. However, one of the best methods in the industry is electrodeposition, which employs the principles of electrochemistry to deposit materials on a working electrode. The cyclic voltammetry and constant potential deposition studies have been conducted for the electrodeposited copper indium material. In order to better …

Extraction And Bioactivity Evaluation Of Antioxidant Components From Teucrium Stocksianum Bioss Collected From Uae, Ahmad Ayman Al Salloum

Theses

Recently, the industry of Natural Bioactive Compounds (NBAC) is expanding dramatically due to its high medical potentials. High bioactivity of natural extracts from a wide range of plants is evident from the reported literature. For instance, NBACs show antibacterial, antifungal, antimicrobial, anti-inflammatory, anticancer and antioxidant activities. Teucrium stocksianum Boiss. from the Lamiaceae family is a known herb in the traditional medicine in United Arab Emirates. Multiple bioactivities of T. stocksianum were recorded such as anti-inflammation, analgesia, antioxidation, anticancer, antinociception and antimicrobial bioactivity. In this thesis, the extraction of NBACs from T. stocksianum was studied with Microwave-assisted extraction using Deep eutectic …

Electrodeposition Study Of Alloys For Solar Energy, Corrosion Resistance, And Battery Applications, Thaier Tawfeek Alawadh

Theses

Copper-Zinc-Tin sulphide (CZTS) compound is one of the alloys, which has significantly caught the attention of a considerable number of researchers since the beginning of the century. Consequently, academic laboratories started investigating the alloy in-depth with its various combination due to its valuable applications with high potential usage. The CZTS alloy has a high tendency to replace the current copper indium gallium selenide (CIGS) thin-film solar cell system due to scarcity of CIGS components, and toxic manufacturing procedures compared to CZTS. Nevertheless, CZTS is a new studied compound with exceptionally low photovoltaic empirical efficiency and an inadequate understanding of its …

Preparation And Characterization Of Reactive Composites Combining Boron With Mixed Oxides, Purvam Mehulkumar Gandhi

Theses

Thirteen liquids have been explored as Process Control Agents (PCAs) for high-energy mechanical milling of two metal oxide powders, CuO and Bi₂O₃, with the practical purpose to reduce the sizes of powder particles and refine their crystal structure. Multiple liquid properties have been considered to analyze their effect on evolution of both particle and crystallite sizes during milling for each oxide. Experimental data were analyzed using the δ-AICc (Akaike Information criterion) correlation function applied to linear relations between liquid properties and powder characteristics. Multiple linear correlation models were ranked based on the highest log-likelihood and the …

Calcium Phosphate/Ionic Liquid Ptfe Composite Membrane For Proton Exchange Membrane Fuel Cell Applications, Ahmad Ibrahim Hasan Ka’Ki

Theses

The dependence on fossil fuels can be possibly reduced by the utilization of renewable energy sources. Fuel cells offer a promising alternative for renewable power generation. Among the various types of fuel cells, Proton Exchange Membrane Fuel Cell (PEMFC) is recently attracting attention due to its several advantages of high-power density, all solid structure, and silent operation. The diverse types of materials used in this type of fuel cell raised drawbacks related to fuel cell cost and durability. By far, Nafion of DuPont is still the current state-of-the-art membrane for PEMFCs. It is known for its high ionic conductivity and …

Developing A New Formula For Predicting Oil Recovery Factor In Water Flooded-Heterogeneous Reservoirs, Mohamed Khaled Aljifri

Theses

In this work, two sets of empirical correlations were developed for predicting the recovery factor (RF) in water-flooded layered oil reservoirs. The first set of these correlations encompasses four key parameters believed to have a significant impact on waterflooding performance, namely, reservoir heterogeneity (permeability variation coefficient), injected water viscosity, permeability anisotropy (ratio of vertical permeability to horizontal permeability), and water injection rate. This first set consists of two expanded forms, one for predicting the RF at water breakthrough time (BT) and the other for predicting the RF at the end of the project (EOP). Out of the aforementioned four key …

Poly (Lactic Acid)/Nanoclay Nanocomposites For Packaging Applications, Maissa Akram Adi

Theses

With increasing stringent environmental regulations and attempts to reduce dependence on fossil fuels for polymer production, bio-based polymers are receiving appreciable global attention. In this context, bio-based poly (lactic acid) (PLA) is one of the most frequently used polymers in packaging applications. However, despite of its high versatility, this polymer is limited in packaging applications due to its low mechanical properties. The two-dimensional nanofillers such as nanoclay and graphene are well known for improving the thermo-mechanical properties of polymers at low concentrations. However, increasing higher filler concentration to improve barrier properties of polymers reduces their mechanical properties which is a …

Effect Of 3d Printed Tablet Shape On Drug Release Profile, Christina Gedeon

Theses

There is a growing interest in utilizing additive manufacturing (AM) as a manufacturing tool to develop oral tablets for personalized medicine. This ultimate goal in mind, this study explores the feasibility of extrusion-based fused deposition modeling (FDM) to 3D print oral tablets with tunable design to control drug release profile. Tablets are printed using poly(vinyl alcohol) (PVA) loaded with model drugs: acetaminophen and caffeine. Hot melt extrusion (HME) is used to fabricate PVA filaments loaded with acetaminophen and caffeine. These filaments are used to fabricate a range of tablets with varying designs to prepare immediate and delayed release tablets. Thermal …

Impact Of Stirrer Speed And Media Type-Loading On The Breakage Kinetics During Wet Stirred Media Milling Of Griseofulvin, Nathaniel Parker

Theses

The aim of this study is to investigate the impact of stirrer speed (2000-4000 rpm) and bead loading (~20-60%) on the breakage kinetics-energy consumption during milling of griseofulvin, a poorly soluble drug, and compare the performance of crosslinked polystyrene (CPS) beads with that of yttrium-stabilized zirconia (YSZ) beads. Laser diffraction, SEM, viscometry, and XRPD were used for characterization. A microhydrodynamic model was used to interpret the breakage kinetics. An increase in stirrer speed led to faster breakage due to more frequent and forceful CPS bead-bead collisions. Despite causing slight decrease in maximum contact pressure, an increase in CPS bead loading …

Glass Transition Temperature Of Particles For Drug Delivery, Yiqing Yang

Theses

Drug delivery plays an important role in targeted therapies and nanoparticles which can be used as drug carriers and it’s a frequently researched topic. Poly(lactic-co-glycolic acid) (PLGA), a highly biocompatible polymer, has been used as a drug delivery vehicle in many studies. One of the challenges facing drug delivery particles is the problem of burst release which is when a large amount of the drug is suddenly released from the particle once it is placed in the body. This is generally undesirable as usually a slow and controlled release is preferred. The glass transition temperature has an effect on drug …

The Use Of Electrical Resistance Tomography To Determine The Minimum Agitation Speed For Solids Suspension In Stirred Tank Reactors, Baran Teoman

Theses

Njs, the minimum agitation speed needed to just suspend all the solid particles in a solid-liquid mixture stirred in an agitated vessel, is a critical parameter to properly operate industrial tanks in a large number of industrial operations. As a result, a significant literature on Njs is available. The oldest and the most common method to measure Njs experimentally is that of Zwietering’s (Chem. Eng. Sci., 1958, 8, 244-253), where Njs can be visually obtained by determining when the solids stay at the bottom of the tank for no more than 1-2 seconds before being swept away. Although this has …

Development Of Biodegradable -Polylactic Acid - Date Palm Waste Composite As Thermal Insulation Material, Mohamed Saeed Barkhad

Theses

This study aims to develop a green polymer composite from local natural waste, such as date pit powder (DPP) and date palm wood powder (DPWP), as an insulating material. The recycling and reuse of natural waste as filler for green insulation materials has many significant benefits for the environment of the UAE.

Date palm waste was mixed with a polylactic acid (PLA) polymer with various proportions in a melt extruder. The mixtures produced were then shaped differently after testing in a thermal compression machine. These composites were tested to evaluate their physical (water absorption, chemical resistance, and bulk density), thermal …

Production Of Anti-Corrosion Materials From Uae Date Palm Waste, Nour Shehadeh Abdelrahman

Theses

Palm tree serves as the main source of biomass in the Gulf countries. The United Arab Emirates (UAE) alone is blessed with more than 40 million date palm trees, which generate a huge amount of waste annually. The main objective of this thesis is to examine the ability to produce a corrosion inhibitor from a date palm tree, waste, starting by extracting lignin from different parts of the date palm tree and characterizing the extracted lignin, converting lignin to sodium lignosulfonate, while selecting the optimum condition for the conversion reaction and characterizing the prepared lignosulfonate. Finally, the corrosion efficiency for …

Investigating Green Inhibitors For Acidic Corrosion Of Carbon Steel, Osama Abu-Alyosr Kamal Ibrahim

Theses

This study is intended to investigate Khalas palm date pits extract as a green corrosion inhibitor alternative to commercial inhibitors. Inhibition efficiency of the obtained extract was investigated on carbon steel grade S355JR immersed in different corrosive mediums of 2 molarity hydrochloric acid (������) solution and seawater solution. Along with other ingredients in palm date pits, Polyphenolic compounds have a significant anti-oxidation property and were found effective in reducing corrosion rate.

Due to its common industrial applications, Carbon steel was used in this investigation as the corroding medium, while 2M ������ and seawater solutions were used separately as the corrosive …

Feasibility Of Integrating Microfluidics Into Point-Of-Care Bio-Diagnostics, Swetha Manoharan

Theses

Potassium in the body needs to be maintained in proper levels for the normal functioning of heart and kidneys. The aim of this work is to develop a simple technique to measure the concentration of Potassium present in a bodily fluid sample, which can be used to assess the health condition of extremely sick patients, especially when the patient's condition needs to be diagnosed and results needs to be obtained rapidly under Point-of-Care settings. Microfluidics is one of the platforms used in bio-diagnostics because of several advantages such as low sample volume requirement and integration into high-throughput screening. In this …

Interactions Between Polymer Nanoparticles And Blood Plasma Applied To Drug Delivery Systems, Mark Bannon

Theses

Targeted nanoparticle drug delivery has the potential to replace current forms of cancer therapy with previously unparalleled efficiency. Upon introduction into the human body, nanoparticles exhibit a substantial increase in diameter due to a biomolecular corona formation caused by interactions between blood plasma proteins and the nanoparticles. These interactions must be analyzed and understood for targeted delivery to reach its potential in both feasibility and efficiency.

To study the formation of the protein corona, polystyrene nanoparticles were incubated in vitro in goat blood plasma for 10-minute intervals, diluted to different degrees and then measured to obtain the hydrodynamic diameter of …

Mechanochemical Nitration Of Aromatic Compounds, Oleg Shlomo Lagoviyer

Theses

Aromatic compounds such as toluene are commercially nitrated using a combination of nitric acid with other strong acids. This process relies on the use of highly corrosive chemicals and generates environmentally harmful waste, which is difficult to handle and dispose of. In this study aromatic nitration using solvent-free mechanochemical processing of environmentally benign precursors has been achieved and investigated. Mononitrotoluene was synthesized by milling toluene with sodium nitrate and molybdenum trioxide as a catalyst. Several parameters affecting the desired product yield and selectivity were identified and varied. MNT yields in excess of 60% have been achieved in different tests. The …

Optimization Of A New Array Noise Tool; Analysis & Interpretation Of Case Studies Of Down- Hole Leak Detection, Moustafa Mahmoud Hassan Ismail

Theses

This thesis is concerned with the optimization and analysis of new array noise tools. Various lab and field case studies are analyzed to test the capabilities and determine the optimum operating conditions of the new tool for leak detection purposes. The purpose of this study is to optimize the logging procedure of real-time array noise tool, selecting adequate gain parameters and frequency band in the processing phase, and to analyze the data acquired through multiple labs and field tests. The study methodology involved the following steps:

1. Performing lab and field tests for the tool in a range of different …

Comparative Analysis Of The Dissolution Performance Of Aspirin Tablets In The Usp Apparatus 2 And In A Minivessel Dissolution System, Annmarie C. Walker

Theses

Dissolution testing is a critical component of quality control procedures in the pharmaceutical industry in order to ensure that the final solid dosage forms have consistent dissolution properties. Dissolution tests are also routinely conducted to evaluate the in-vitro performance of solid dosage forms during pharmaceutical development, to aid in the behavior of formulations, and to optimize drug release from dosage forms.

The use of compendial dissolution test apparatus and techniques, such as the USP 2 (Paddle), to characterize the dissolution performance of oral drug delivery system is an established area of pharmaceutical science. However, this method is not always appropriate, …

Computational And Experimental Determination Of The Mixing Efficiency Of A Microfluidic Serpentine Micromixer, Siril Arockiam

Theses

In microfluidics, efficiency and mixing time are the greatest disadvantages. These parameters hinder the application of microfluidic devices for biochemical and immunological assays. However, once these disadvantages have been overcome by optimizing the parameters of the microfluidic device, it becomes the important analytical tool. In this experiment, various designs of microfluidic devices have been both simulated using COMSOL software, and experimentally verified to obtain the optimized parameter such as depth and velocity for better mixing efficiency. The COMSOL model has been validated by comparing the results with fluorescent images data of the experiment. The microfluidic device is built with Adhesive …

Experimental Study Of Low Salinity Water Flooding And Fracturing Effects In Low Permeability Carbonate Reservoir, Benny Arianto Harahap

Theses

In past decades, there were numerous research works demonstrated that salinity alteration of injected water could enhance the oil recovery. Low salinity water (LSW) injection is a type of Enhanced Oil Recovery (EOR) method, which attracts the industrial, and researchers because of its simplicity to use the implications,

Environment-friendly nature, and less cost. In addition to, hydraulic fracturing, also known as hydraulic stimulation, is another EOR method that improves hydrocarbon flow by creating fractures in the Low Permeability Formation (LPF) that connects the reservoir and wellbore. Fractures will increase the permeability of reservoir and give the flow path for hydrocarbon …

High Performance Lattice Boltzmann Method Yield-Stress Calculations Based On Intravital Images Of Clot Formation In Live Mice, Vishnu Deep Chandran

Theses

Thrombo-embolic infarction is the major cause of mortality and morbidity in the United States, causing over 1 million strokes, heart attacks and other life-threatening thrombotic events each year in the United States. Conversely, deficiencies in these processes result in severe bleeding risks. The ability to access hydrodynamics stresses at which thrombus structure is likely to embolize can provide insight into the thrombogenesis process. Interestingly, the viscoelastic behavior exhibited by the thrombus resembles that of a Bingham fluid - a material that behaves as a rigid body at low stresses but flows as a viscous fluid when the stress exceeds critical …

Nanocomposite Thermite Powders With Improved Flowability Prepared By Mechanical Milling, Ci Huang

Theses

Nanocomposite thermite powders are of interest to develop varieties of reactive parts and components. Manufacturing these components requires tailoring properties of the thermite powders such as their particle size distributions, particle shapes, and powder flowability. For example, an improved flowability is desired to use these powders as feedstock in additive manufacturing. Arrested reactive milling (ARM) offers a versatile and practical approach for preparing various nanocomposite thermites with fully dense particles, which will retain their structures and mixedness between reactive components while being stored, handled, and processed. However, ARM products usually have broad particle size distributions, rock-like particle shapes, and poor …

Thermal Swing Membrane Based Method For Co2 Capture From Flue Gas, Mukesh Kumar Kamad

Theses

Carbon dioxide, a greenhouse gas and a major contributor to global warming, is released in large amounts by flue gases. To limit climate change, such CO₂ emissions have to be reduced, CO₂ captured and sequestered. Conventional monoethanolamine (MEA)-based absorption techniques are costly due to high capital cost and high energy consumption since the absorbent has to be regenerated at a high temperature ~ 120°C. A temperature swing membrane absorption (TSMAB) process was described by Mulukutla et al. (2015) using a novel membrane contactor, novel absorbents and a cyclic process. In this device, the absorbent is on the shell …

Power Dissipation And Power Correlations For A Retreatblade Impeller Under Different Baffling Conditions, Chadakarn Sirasitthichoke

Theses

Glass-lined stirred reactors and tanks are commonly used in the pharmaceutical industry because of their corrosion resistance, ease of cleanliness and minimization of product contamination. Most industrial glass-lined tank reactors are provided with a torispherical tank bottom and a retreat curve impeller with low impeller clearance from the vessel bottom. The power, P, dissipated by the impeller is a critical process parameter to mixing processes to achieve the desired mixing effect, especially since the power per unit volume, P/V, directly controls mass transfer processes and other mixing phenomena. However, little information has been published about the power dissipation and the …

Investigation Of Nh3 And No Adsorption Over Cu/Sapo-34 And Cu/Aloo3 Catalysts For Nh3–Scr System, Basil Rawah

Theses

In this study, Copper supported on SAPO-34 molecular sieves or alumina is prepared via an incipient wetness impregnation method for ammonia selective catalytic reduction (NH₃-SCR). These NH₃-SCR catalysts are characterized by pulse chemisorption, temperature-programmed reduction (TPR), and temperature-programmed desorption (TPD) with three different conditions (NH₃, NO, combined NH₃-NO) to evaluate the adsorption of ammonia and nitric oxide. Cu/SAPO-34 catalyst has shown higher ammonia adsorption capacity compared to Cu/Al₂O₃ catalyst. The Cu/SAPO-34 adsorption is enhanced due to the strong acidity and high surface area of SAPO-34 molecular sieves. NO adsorption …

Evaluation Of Electrocoagulation For Chloride And Ammonium Removal From The Reject Brine Effluent Pretreated By Solvay Process, Miada Abubaker Ali

Theses

Excessive use of desalination, due to the increase in freshwater demand, results in large productions of reject brine. Therefore, the development of an efficient treatment process of the reject brine becomes vital. The Solvay process is one of the main treatment technologies, wherein NH₃ is introduced to convert soluble Na⁺ into insoluble NaHCO₃. However, in this process, Cl^- is not removed and NH₄⁺ is introduced, and therefore electrocoagulation has been proposed for their removal. The experiment was designed using Minitab with different initial concentrations of chloride (7400 – 32600 mg/l), current densities (0.033 …