Chemical Engineering Commons^™

Design Process For The Containment And Manipulation Of Liquids In Microgravity, Chris Meek

Theses and Dissertations--Mechanical and Aerospace Engineering

In order to enhance accessibility to microgravity research, the design process for experiments on the ISS must be streamlined and accessible to all scientific disciplines, not just aerospace engineers. Thus, a general design and analysis toolbox with accompanying best practices manual for microgravity liquid containment is proposed. The work presented in this thesis improves the design process by introducing a modular liquid tank design which can be filled, drained, or act as a passive liquid-gas separation device. It can also be pressurized, and used for aerosol spray. This tank can be modified to meet the design requirements of various experimental …

Synthesis, Functionalization, And Application Of Nanofiltration And Composite Membranes For Selective Separations, Andrew Steven Colburn

Theses and Dissertations--Chemical and Materials Engineering

Future nanofiltration (NF) membranes used for selective separations of ions and small organic molecules must maintain performance in environments where high concentrations of total dissolved solvents or foulants are present. These challenges can be addressed through the development of composite membranes, as well as the engineering of enhanced surface properties and operating conditions for existing commercial membranes.

In this work, ion transport through commercial thin film composite (TFC) polyamide NF membranes were studied in both lab-prepared salt solutions and industrial wastewater. The dependence of several variables on ion rejection was investigated, including ion radius, ion charge, ionic strength, and temperature. …

Towards The Rational Design And Application Of Polymers For Gene Therapy: Internalization And Intracellular Fate, Landon Alexander Mott

Theses and Dissertations--Chemical and Materials Engineering

Gene therapy is an approach for the treatment of acquired cancers, infectious disease, degenerative disease, and inherited genetic indications. Developments in the fields of immunotherapies and CRISPR/Cas9 genome editing are revitalizing the efforts to move gene therapy to the forefront of modern medicine. However, slow progress and poor clinical outcomes have plagued the field due to regulatory and safety concerns associated with the flagship delivery vector, the recombinant virus. Immunogenicity and poor transduction in certain cell types severely limits the utility of viruses as a delivery agent of nucleic acids. As a result, significant efforts are being made to develop …

Development Of Novel Temperature Responsive Polymeric Sorbents And Their Applications In Water Remediation, Shuo Tang

Theses and Dissertations--Chemical and Materials Engineering

Water remediation utilizing sorption has found strong interest due to its inexpensiveness, universal nature and ease of operation. In particular, thermo-responsive sorbents consisting of N-isopropylacrylamide (NIPAAm) offer significant potential as “smart” and advanced materials to remove multiple aqueous pollutants. NIPAAm exhibits excellent thermo-responsiveness, which senses the external temperature variation and changes its swelling and sorption behaviors in a sharp and rapid manner. At the beginning of this work, an extensive review of literature has been compiled to provide a summary of NIPAAm-based thermo-responsive sorbents in water/wastewater remediation applications.

Initially, we developed a novel approach to synthesize and characterize NIPAAm copolymeric …

Functionalization Of Iron Oxide Nanoparticles And The Impact On Surface Reactive Oxygen Species Generation For Potential Biomedical And Environmental Applications, Trang Mai

Theses and Dissertations--Chemical and Materials Engineering

Iron oxide nanoparticles (IONPs) have been widely studied for a variety of applications, from biomedical applications (e.g., cell separation, drug delivery, contrast agent for magnetic resonance imaging and magnetically mediated energy delivery for cancer treatment) to environmental remediations (e.g., heavy metal removal and organic pollutants degradation). It has been demonstrated that IONPs can induce the production of reactive oxygen species (ROS) via Fenton/Haber-Weiss reactions which has been shown to be one of the key underlying mechanisms of nanoparticles toxicity. This inherent toxicity of nanoparticles has been shown to enhance the efficacy of traditional cancer therapies such as chemotherapy and radiation. …

Mechanical Properties And Degradation Of High Capacity Battery Electrodes: Fundamental Understanding And Coping Strategies, Yikai Wang

Theses and Dissertations--Chemical and Materials Engineering

Rechargeable lithium ion and lithium (Li) metal batteries with high energy density and stability are in high demand for the development of electric vehicles and smart grids. Intensive efforts have been devoted to developing high capacity battery electrodes. However, the known high capacity electrode materials experience fast capacity fading and have limited cycle life due to electromechanical degradations, such as fracture of Si-based electrodes and dendrite growth in Li metal electrodes. A fundamental understanding of electromechanical degradation mechanisms of high capacity electrodes will provide insights into strategies for improving their electrochemical performance. Thus, this dissertation focuses on mechanical properties, microstructure …

Cell Surface Coatings For Mammalian Cell-Based Therapeutic Delivery, Pei-Jung Wu

Theses and Dissertations--Chemical and Materials Engineering

The cell plasma membrane is an interactive interface playing an important role in regulating cell-to-cell, cell-to-tissue contact, and cell-to-environment responses. This environment-responsive phospholipid layer consisting of multiple dynamically balanced macromolecules, such as membrane proteins, carbohydrate and lipids, is regarded as a promising platform for various surface engineering strategies. Through different chemical modification routes, we are able to incorporate various artificial materials into the cell surface for biomedical applications in small molecule and cellular therapeutics.

In this dissertation, we establish two different cell coating techniques for applications of cell-mediated drug delivery and the localization of cell-based therapies to specific tissues. The …

Impact Of Conformational Change, Solvation Environment, And Post-Translational Modification On Desulfurization Enzyme 2'-Hydroxybiphenyl-2-Sulfinate Desulfinase (Dszb) Stability And Activity, Landon C. Mills

Theses and Dissertations--Chemical and Materials Engineering

Naturally occurring enzymatic pathways enable highly specific, rapid thiophenic sulfur cleavage occurring at ambient temperature and pressure, which may be harnessed for the desulfurization of petroleum-based fuel. One pathway found in bacteria is a four-step catabolic pathway (the 4S pathway) converting dibenzothiophene (DBT), a common crude oil contaminant, into 2-hydroxybiphenyl (HBP) without disrupting the carbon-carbon bonds. 2’-Hydroxybiphenyl-2-sulfinate desulfinase (DszB), the rate-limiting enzyme in the enzyme cascade, is capable of selectively cleaving carbon-sulfur bonds. Accordingly, understanding the molecular mechanisms of DszB activity may enable development of the cascade as industrial biotechnology. Based on crystallographic evidence, we hypothesized that DszB …

Targeted Illumination Strategies For Hydrogen Production From Purple Non-Sulfur Bacteria, John D. Craven

Theses and Dissertations--Chemical and Materials Engineering

The movement towards a more sustainable energy economy may require not only the generation of cleaner fuel sources, but the conversion of waste streams into value-added products. Phototrophic purple non-sulfur bacteria are capable of metabolizing VFAs (volatile fatty acids)and generate hydrogen as a byproduct of nitrogen fixation using energy absorbed from light. VFAs are easily produced from dark anaerobic fermentation of food, agricultural, and municipal wastes, which could then be fed into photobioreactors of purple bacteria for hydrogen production.

The process of photofermentation by purple bacteria for hydrogen production remains attractive due to the capability of reaching high substrate conversions …

Development Of Magnetic Nanocomposite Materials As Reusable Adsorbents For Chlorinated Organics In Contaminated Water, Angela Gutierrez

Theses and Dissertations--Chemical and Materials Engineering

The constant growth in population worldwide over the past decades continues to put forward the need to provide access to safe, clean water to meet human needs. There is a need for cost-effective technologies for water and wastewater treatment that can meet the global demands and the rigorous water quality standards and at the same maximizing pollutant efficiency removal. Current remediation technologies have failed in keeping up with these factors without becoming cost-prohibitive. Nanotechnology has recently been sought as a promising option to achieve these goals. The use of iron oxide magnetic nanoparticles as nanoadsorbents has led to a new …

Synthesis, Characterization And Applications Of Reduced Graphene Oxide And Composite Membranes For Selective Separations And Removal Of Organic Contaminants, Ashish Aher

Theses and Dissertations--Chemical and Materials Engineering

Among the next generation materials being investigated for membrane development, partially reduced Graphene Oxide (rGO) has received increasing attention from the membrane community. rGO-based nanofiltration membranes have shown promising results in applications such as partial desalination, organic contaminant removal, gas-phase separations, and separations from solvent media. rGO offers a unique platform compared to common polymeric membranes since it can be used for separation applications in both aqueous and organic solvent media. An rGO-based platform could also be utilized to synthesize reactive membranes, giving rGO membranes the additional capability of reactively removing organic contaminants. This research focuses on the synthesis of …

Nanoharvesting And Delivery Of Bioactive Materials Using Engineered Silica Nanoparticles, Md Arif Khan

Theses and Dissertations--Chemical and Materials Engineering

Mesoporous silica nanoparticles (MSNPs) possess large surface areas and ample pore space that can be readily modified with specific functional groups for targeted binding of bioactive materials to be transported through cellular barriers. Engineered silica nanoparticles (ESNP) have been used extensively to deliver bio-active materials to target intracellular sites, including as non-viral vectors for nucleic acid (DNA/RNA) delivery such as for siRNA induced interference. The reverse process guided by the same principles is called “nanoharvesting”, where valuable biomolecules are carried out and separated from living and functioning organisms using nano-carriers. This dissertation focuses on ESNP design principles for both applications. …

The Fabrication And Characterization Of Metal Oxide Nanoparticles Employed In Environmental Toxicity And Polymeric Nanocomposite Applications, Matthew Logan Hancock

Theses and Dissertations--Chemical and Materials Engineering

Ceria (cerium oxide) nanomaterials, or nanoceria, have commercial catalysis and energy storage applications. The cerium atoms on the surface of nanoceria can store or release oxygen, cycling between Ce³⁺ and Ce⁴⁺, and can therefore act as a therapeutic to relieve oxidative stress within living systems. Nanoceria dissolution is present in acidic environments in vivo. In order to accurately define the fate of nanoceria in vivo, nanoceria dissolution or stabilization is observed in vitro using acidic aqueous environments.

Nanoceria stabilization is a known problem even during its synthesis; in fact, a carboxylic acid, citric acid, is …

Performance Of C2H4 Reductant In Activated-Carbon-Supported Mnox-Based Scr Catalyst At Low Temperatures, Guangli Liu, Dongtai Han, Jie Cheng, Yongshi Feng, Wenbin Quan, Li Yang, Kozo Saito

Mechanical Engineering Faculty Publications

Hydrocarbons as reductants show promising results for replacing NH₃ in SCR technology. Therefore, considerable interest exists for developing low-temperature (< 200 °C) and environmentally friendly HC-SCR catalysts. Hence, C₂H₄ was examined as a reductant using activated-carbon-supported MnOx-based catalyst in low-temperature SCR operation. Its sensitivity to Mn concentration and operating temperature was parametrically studied, the results of which showed that the catalyst activity followed the order of 130 °C > 150 °C > 180 °C with an optimized Mn concentration near 3.0 wt.%. However, rapid deactivation of catalytic activity also occurred when using C₂H₄ as the reductant. The mechanism of deactivation was explored and is …

Determination Of Chemical Speciation Of Arsenic And Selenium In High-As Coal Combustion Ash By X-Ray Photoelectron Spectroscopy: Examples From A Kentucky Stoker Ash, Biao Fu, James C. Hower, Shifeng Dai, Sarah M. Mardon, Guijian Liu

Center for Applied Energy Research Faculty and Staff Publications

Knowledge of the chemical speciation of arsenic and selenium in coal fly ash is essential in the evaluation of the environmental behavior of fly ash disposed in a landfill in a natural environment. In this study, a series of high-As coal fly ash from stoker boilers were collected to determine the chemical forms of arsenic and selenium. The ash surface chemical characteristics and the speciation of arsenic and selenium were characterized by X-ray photoelectron spectroscopy and X-ray-induced Auger electron spectroscopy. The results indicate that the surface enrichment ratio for selenium (63.3–309.5) is higher than that of arsenic (1.2–21.2). The Wagner …

Determining The Degree Of [001] Preferred Growth Of Ni(Oh)2 Nanoplates, Taotao Li, Ning Dang, Wanggang Zhang, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Determining the degree of preferred growth of low-dimensional materials is of practical importance for the improvement of the synthesis methods and applications of low-dimensional materials. In this work, three different methods are used to analyze the degree of preferred growth of the Ni(OH)₂ nanoplates synthesized without the use of a complex anion. The results suggest that the preferred growth degree of the Ni(OH)₂ nanoplates calculated by the March parameter and the expression given by Zolotoyabko, which are based on the analysis and texture refinement of the X-ray diffraction pattern, are in good accordance with the results measured by …

Cellulose-Specific Type B Carbohydrate Binding Modules: Understanding Oligomeric And Non-Crystalline Substrate Recognition Mechanisms, Abhishek A. Kognole, Christina M. Payne

Chemical and Materials Engineering Faculty Publications

Background: Effective enzymatic degradation of crystalline polysaccharides requires a synergistic cocktail of hydrolytic enzymes tailored to the wide-ranging degree of substrate crystallinity. To accomplish this type of targeted carbohydrate recognition, nature produces multi-modular enzymes, having at least one catalytic domain appended to one or more carbohydrate binding modules (CBMs). The Type B CBM categorization encompasses several families (i.e., protein folds) of CBMs that are generally thought to selectively bind oligomeric polysaccharides; however, a subset of cellulose-specific CBM families (17 and 28) appear to bind non-crystalline cellulose more tightly than oligomers and in a manner that discriminates between surface topology.

Results: …

Linking Lignin Source With Structural And Electrochemical Properties Of Lignin-Derived Carbon Materials, Wenqi Li, Yan Zhang, Lalitendu Das, Yikai Wang, Mi Li, Namal Wanninayake, Yunqiao Pu, Doo Young Kim, Yang-Tse Cheng, Arthur J. Ragauskas, Jian Shi

Biosystems and Agricultural Engineering Faculty Publications

Valorization of lignin to high-value chemicals and products along with biofuel production is generally acknowledged as a technology platform that could significantly improve the economic viability of biorefinery operations. With a growing demand for electrical energy storage materials, lignin-derived activated carbon (AC) materials have received increasing attention in recent years. However, there is an apparent gap in our understanding of the impact of the lignin precursors (i.e., lignin structure, composition and inter-unit linkages) on the structural and electrochemical properties of the derived ACs. In the present study, lignin-derived ACs were prepared under identical conditions from two different lignin …

Scaling Nonreactive Cross Flow Over A Heated Plate To Simulate Forest Fires, Nikolay Gustenyov, Nelson Akafuah, Ahmad Salaimeh, Mark A. Finney, Sara Mcallister, Kozo Saito

Institute of Research for Technology Development Faculty Publications

The paper reports visualization of the flow of smoke over a flat surface inside of a low-speed wind tunnel. A heating plate flush mounted on the wind tunnel floor simulated a spreading line fire that produces uniform heat flux under constant wind speed condition. A paper-thin cloth was soaked with commercially available Vaseline and placed on top of the heating plate; when it is heated, it produced thick white smoke, ideal for flow visualization. Two sides and top of the wind tunnel were made of a trans- parent acrylic sheet that enabled LED and laser sheet light illumination of the …

Photocatalytic Activity: Experimental Features To Report In Heterogeneous Photocatalysis, Md. Ariful Hoque, Marcelo I. Guzman

Chemistry Faculty Publications

Heterogeneous photocatalysis is a prominent area of research with major applications in solar energy conversion, air pollution mitigation, and removal of contaminants from water. A large number of scientific papers related to the photocatalysis field and its environmental applications are published in different journals specializing in materials and nanomaterials. However, many problems exist in the conception of papers by authors unfamiliar with standard characterization methods of photocatalysts as well as with the procedures needed to determine photocatalytic activities based on the determination of “apparent quantum efficiencies” within a wavelength interval or “apparent quantum yields” in the case of using monochromatic …

Highly Thiolated Poly (Beta-Amino Ester) Nanoparticles For Acute Redox Applications, Andrew L. Lakes, David A. Puleo, J. Zach Hilt, Thomas D. Dziubla

Chemical and Materials Engineering Faculty Publications

Disulfides are used extensively in reversible cross-linking because of the ease of reduction into click-reactive thiols. However, the free-radical scavenging properties upon reduction are often under-considered. The free thiols produced upon reduction of this disulfide material mimic the cellular reducing chemistry (glutathione) that serves as a buffer against acute oxidative stress. A nanoparticle formulation producing biologically relevant concentrations of thiols may not only provide ample chemical conjugation sites, but potentially be useful against severe acute oxidative stress exposure, such as in targeted radioprotection. In this work, we describe the synthesis and characterization of highly thiolated poly (β-amino ester) (PBAE) nanoparticles …

Local Deformation And Texture Of Cold-Rolled Aa6061 Aluminum Alloy, Diaoyu Zhou, Wenwen Du, Xiyu Wen, Junwei Qiao, Wei Liang, Fuqian Yang

Chemical and Materials Engineering Faculty Publications

Using cold rolling, we plastically deform AA6061 sheets at room temperature and investigate the variations of the microstructures, textures and local deformation of the cold-rolled AA6061 sheets as functions of thickness reduction (Δt/t₀, t₀ and t are the thicknesses of the AA6061 sheet before and after the cold rolling, respectively). The volume fraction of total deformation texture is relatively independent of the thickness reduction for Δt/t₀ ≤ 30%, and becomes an approximately linearly increasing function of the thickness reduction for Δt/t₀ > 30%. Increasing the thickness reduction causes the increase of the Vickers hardness of the …

Self-Cleaning Nanocomposite Membranes With Phosphorene-Based Pore Fillers For Water Treatment, Joyner Eke, Katherine Elder, Isabel Escobar

Chemical and Materials Engineering Faculty Publications

Phosphorene is a two-dimensional material exfoliated from bulk phosphorus and it possesses a band gap. Specifically, relevant to the field of membrane science, the band gap of phosphorene provides it with potential photocatalytic properties, which could be explored in making reactive membranes that can self-clean. The goal of this study was to develop an innovative and robust membrane that is able to control and reverse fouling with minimal changes in membrane performance. To this end, for the first time, membranes have been embedded with phosphorene. Membrane modification was verified by the presence of phosphorus on membranes, along with changes in …

Aging Response And Precipitation Behavior After 5% Pre-Deformation Of An Al-Mg-Si-Cu Alloy, Shuoxun Jin, Tungwai Ngai, Liejun Li, Shian Jia, Tongguang Zhai, Dongjie Ke

Chemical and Materials Engineering Faculty Publications

In this study, Al-1.00 Mg-0.65 Si-0.24 Cu alloy was solution heat-treated, water-quenched, and then pre-deformed for 5% before aging. The peak hardness and yield strength of the pre-deformed sample with subsequent artificial aging were similar to that of a T6 condition sample. It was also found that the pre-deformation treatment could inhibit the negative influence of natural aging to some degree. After seven days of natural aging, the pre-deformed sample obtained better peak hardness and yield strength upon artificial aging than the sample without pre-deformation. In addition, the pre-deformation treatment could reduce 50% of the artificial aging time to reach …

Investigation Of The Use Of A Bio-Derived Solvent For Non-Solvent-Induced Phase Separation (Nips) Fabrication Of Polysulfone Membranes, Xiaobo Dong, Amna Al-Jumaily, Isabel Escobar

Chemical and Materials Engineering Faculty Publications

Organic solvents, such as N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc), have been traditionally used to fabricate polymeric membranes. These solvents may have a negative impact on the environment and human health; therefore, using renewable solvents derived from biomass is of great interest to make membrane fabrication sustainable. Methyl-5-(dimethylamino)-2-methyl-5-oxopentanoate (Rhodiasolv PolarClean) is a bio-derived, biodegradable, nonflammable and nonvolatile solvent. Polysulfone is a commonly used polymer to fabricate membranes due to its thermal stability, strong mechanical strength and good chemical resistance. From cloud point curves, PolarClean showed potential to be a solvent for polysulfone. Membranes prepared with PolarClean were investigated in terms of …

Method Of Increasing Mass Transfer Rate Of Acid Gas Scrubbing Solvents, Cameron Anthony Lippert, Kunlei Liu, Christine Marie Brandewie, Joseph Eugene Remias, Moushumi Sarma

Center for Applied Energy Research Faculty Patents

A method and catalysts for increasing the overall mass transfer rate of acid gas scrubbing solids is disclosed. Various catalyst compounds for that purpose are also disclosed.

Multienzyme Immobilized Polymeric Membrane Reactor For The Transformation Of A Lignin Model Compound, Rupam Sarma, Md. Saiful Islam, Mark P. Running, Dibakar Bhattacharyya

Chemical and Materials Engineering Faculty Publications

We have developed an integrated, multienzyme functionalized membrane reactor for bioconversion of a lignin model compound involving enzymatic catalysis. The membrane bioreactors were fabricated through the layer-by-layer assembly approach to immobilize three different enzymes (glucose oxidase, peroxidase and laccase) into pH-responsive membranes. This novel membrane reactor couples the in situ generation of hydrogen peroxide (by glucose oxidase) to oxidative conversion of a lignin model compound, guaiacylglycerol-β-guaiacyl ether (GGE). Preliminary investigation of the efficacy of these functional membranes towards GGE degradation is demonstrated under convective flow mode. Over 90% of the initial feed could be degraded with the multienzyme immobilized membranes …

Modeling And Validation Of Local Electrowinning Electrode Current Density Using Two Phase Flow And Nernst-Planck Equations, Joshua M. Werner, W. Zeng, M. L. Free, Z. Zhang, J. Cho

Mining Engineering Faculty Publications

In this work we demonstrate the validity of a multi-physics model using COMSOL to predict the local current density distribution at the cathode of a copper electrowinning test cell. Important developments utilizing Euler-Euler bubbly flow with coupled Nernst-Planck transport equations allow additional insights into deposit characteristics and topographies.

Application Of Cross-Linked Polyborosiloxanes And Organically Modified Boron Silicate Binders In Silicon-Containing Anodes For Lithium-Ion Batteries, Darius A. Shariaty, Dali Qian, Yang-Tse Cheng, Susan A. Odom

Chemistry Faculty Publications

To determine the effect of cross-linking in polymer binders on gravimetric capacity and retention in charge/discharge cycling of lithium-ion batteries containing silicon anodes, polymers with a varied chemiophysical characters have been studied as electrode binders. Here we report the utilization of cross-linked polyborosiloxanes and a boron-modified organosilicate as binders for nanoparticulate silicon-containing anodes for lithium-ion batteries. We show that highly cross-linked binders enable a large degree of capacity to be accessed and that capacity retention is greater when the electrodes are cycled in half cells. More extensive analysis of the boron-modified organosilicate is further explored.

Orthogonal Photo-Switching Of Supramolecular Patterned Surfaces, Dongsheng Wang, Frank Schellenberger, Jonathan T. Pham, Hans-Jürgen Butt, Si Wu

Chemical and Materials Engineering Faculty Publications

We used Azo/α-CD and ipAzo/γ-CD host–guest complexes to demonstrate that four independent stable states can be orthogonally photo-switched by UV (365 nm), blue (470 nm), green (530 nm) and red light (625 nm). A supramolecular patterned surface was fabricated and orthogonally photo-switched by light with different wavelengths.