Chemical Engineering Commons^™

Treating High Salinity Produced Water Using Hybrid Membrane Processes: Electrocoagulation-Microfiltration/Ultrafiltration-Membrane Distillation-Crystallization, Mahmood Gheni Jebur

Graduate Theses and Dissertations

Produced water (PW) is considered the largest industrial wastewater stream in the world. PW generated from oil and gas operations generally contains a range of contaminants including high total dissolved solids, high total suspended solids, polar and nonpolar organic compounds, and low surface tension dissolved species. Treating PW is very challenging and applying only membrane-based technologies is not sufficient due to membrane fouling, which affects their long-term performance. Hence, integrated membrane processes are required to treat PW effectively. Hybrid membrane processes, which may result from combining a conventional process with a membrane separation, could be used to address the issues …

Liquid Crystalline Coacervates Composed Of Chromonic Mesogens And Polyelectrolytes, Elizabeth Adeogun

Graduate Theses and Dissertations

Complex coacervates are formed by liquid-liquid phase separation of an aqueous solution of oppositely charged ions. Although several mixtures of molecules of natural and synthetic macro-ion have been shown to form complex coacervates, the formation of liquid crystalline (LC) coacervates are sparsely reported. LC coacervates have a unique property in that they can change their shape and optical property in response to external stimuli such as changes in temperature, pH, or the presence of specific molecules. This property makes LC coacervates useful as a sensor, as they can be engineered to respond to specific stimuli and generate a measurable signal …

High Flux Novel Polymeric Membrane For Renal Applications, Christa N. Hestekin, Efecan Pakkaner, Jamie Hestekin, Leticia Santos De Souza, Partha Pratim Chowdhury, Juliana Louzada Marçal, John Moore, Sarah A. Hesse, Christopher J. Takacs, Christopher J. Tassone, Soma Shekar Dachavaram, Peter A. Crooks, Kate Williams, Ira Kurtz

Chemical Engineering Faculty Publications and Presentations

Biocompatibility and the ability to mediate the appropriate flux of ions, urea, and uremic toxins between blood and dialysate components are key parameters for membranes used in dialysis. Oxone-mediated TEMPO-oxidized cellulose nanomaterials have been demonstrated to be excellent additives in the production and tunability of ultrafiltration and dialysis membranes. In the present study, nanocellulose ionic liquid membranes (NC-ILMs) were tested in vitro and ex vivo. An increase in flux of up to two orders of magnitude was observed with increased rejection (about 99.6%) of key proteins compared to that of polysulfone (PSf) and other commercial membranes. NC-ILMs have a sharper …

Freestanding Graphene Heat Engine Analyzed Using Stochastic Thermodynamics, J. Durbin, J. M. Mangum, M. N. Gikunda, F. Harerimana, P. Kumar, L. L. Bonilla, P. M. Thibado

Physics Faculty Publications and Presentations

We present an Ito-Langevin model for freestanding graphene connected to an electrical circuit. The graphene is treated as a Brownian particle in a double-well potential and is adjacent to a fixed electrode to form a variable capacitor. The capacitor is connected in series with a battery and a load resistor. The capacitor and resistor are given separate thermal reservoirs. We have solved the coupled Ito-Langevin equations for a broad range of temperature differences between the two reservoirs. Using ensemble averages, we report the rate of change in energy, heat, and work using stochastic thermodynamics. When the resistor is held at …

Integrated Electrocoagulation, Ultrafiltration, Membrane Distillation, And Crystallization For Treating Produced Water, Mahmood Jebur, Yelyzaveta Bachynska, Xiaolei Hao, Sumith Ranil Wickramasinghe

Chemical Engineering Faculty Publications and Presentations

Produced water (PW) generated from hydraulic fracturing operations was treated using an integrated electrocoagulation, ultrafiltration, membrane distillation, and crystallization process (EC UF MDC). The aim was to determine the viability of this integrated process for maximizing water recovery. The results obtained here indicate that optimizing the various unit operations could lead to increased recovery of PW. Membrane fouling limits all membrane separation processes. A pretreatment step to suppress fouling is essential. Here, removal of total suspended solids (TSS) and total organic carbon (TOC) was achieved by electrocoagulation (EC) followed by ultrafiltration (UF). The hydrophobic membrane used in membrane distillation may …

A Comparison Of Optical Measurement Methods For The Growth Of S. Cerevisiae, Jackson Black

Chemical Engineering Undergraduate Honors Theses

Genetic engineering of living organisms provides the opportunity to express and harvest different proteins from cell surfaces. Yeast (S. cerevisiae) is one such organism and is capable of being grown on an industrial scale. Cellular concentration is an important parameter to monitor while fermentation processes are underway, in order to control the environment inside the growth medium and maximize yields. Spectrophotometry is a conventional method for measuring concentration, but is limited by a narrow absorbance range, and the need for on-site periodic sampling. A continuous method of measurement, as provided by Bug Labs BE2100 non-invasive biomass monitor, would …

Measuring Plume Concentration Variations Under Neutral Atmospheric Conditions, Daniel Williams

Chemical Engineering Undergraduate Honors Theses

Hazardous gases are increasingly becoming a large safety concern as the world continues to grow and industrialize. The modeling of when hazardous gases breach containment is an extremely important objective of consequence assessment planning and response. To improve the understanding of the variability inherent in passive gas releases, a test program to demonstrate the variability of gas concentration measurements at different location in a passive gas plume released from an area source in the ultra-low speed wind tunnel at the Chemical Hazards Research Center. A Flame Ionization Detector was used to measure the concentration of the source cloud. Methane was …

Lignin Copolymer Property Prediction Using Machine Learning, Collin Larsen

Chemical Engineering Undergraduate Honors Theses

Lignin, an abundant biopolymer, is a waste byproduct of the paper and pulp industry. Despite its renewable nature and potential applicability in various products, such as plastics and composites, the development of lignin-based materials has been impeded by the cumbersome, Edisonian process of trial and error. This research proposes a novel approach to forecasting the properties of lignin-based copolymers by utilizing a recurrent neural network (RNN) based on the Keras models previously created by Tao et al. Example units of modified lignin were synthesized via esterification and amination functional group modifications. To increase the efficiency and accuracy of the prediction …

Estimating Toxic Load From Finite-Duration Contaminant Releases In Wind Tunnel Experiments, Patrick B. Jones

Chemical Engineering Undergraduate Honors Theses

When gaseous contaminants are released into the atmosphere said contaminants form clouds that travel in the prevailing wind direction. An individual caught in the downwind path of one such cloud will accumulate a dosage, or toxic load, of said contaminant that is dependent on a multitude of environmental factors. This thesis quantifies unpredictability – or variation – in toxic load measurements using downwind concentration data captured from finite-duration gaseous contaminant releases conducted at set conditions in the Chemical Hazards Research Center ultra-low speed wind tunnel.

Finite-duration releases can be divided into two categories – time-limited steady releases and puffs – …

Comparing Firocoxib And Meloxicam In The Application Of Microneedle Patch For Transdermal Drug Delivery, Ruohan Li

Chemical Engineering Undergraduate Honors Theses

This thesis compares the performance of meloxicam and firocoxib in the aspects of its physical characteristic, chemical compositions, and in-vitro performances for transdermal pain management microneedle patches on farm animals. The microneedle patches are composed of polyvinyl alcohol (PVA), type I collagen (COL), and chitosan (CHI) as base material that carries NSAIDs to achieve therapeutic purposes. Scanning electron microscopy (SEM) was utilized to observe the morphological and physical characteristics of the microneedle patches. Both meloxicam and firocoxib microneedle patches were successfully prepared using the methodology, with organized microneedle distribution and sizing. And Fourier transform infrared spectroscopy (FTIR) confirmed the chemical …

A Teaching Unit Plan For Introducing Engineering In 1st-2nd Grade Classrooms, Claudia Smith

Chemical Engineering Undergraduate Honors Theses

The field of engineering, and specifically chemical engineering, is projected to increase significantly over the next 10 years. Engineering programs require students to have a strong foundation of math and science. Students in the United States are often underprepared to enter these programs, and the majority of high school students are not interested in pursuing a career in the STEM field at all. For this project, a unit teaching plan was created to introduce students to the field of engineering, providing a foundation for their upper-level STEM classes, and encouraging them to consider engineering as a career in the future. …

Battery Design, Construction, And Characterization For Small Motor Use Focusing On Anodic Zinc For Electron Flow, Amber Veach

Chemical Engineering Undergraduate Honors Theses

This thesis explores the construction, characterization, and application of anodic zinc batteries for powering a small electric motor for the ChemE Car competition. Two zinc galvanic cell batteries were studied: zinc-carbon and zinc-air batteries. Prototype batteries were constructed and tested for voltage, amperage, and power production. In the zinc-carbon trials, a 3:1 mixture of manganese dioxide and graphite was determined to be the best cathode for power production. The size which allowed for sufficient power while maintaining the smallest footprint on the car was a zinc can six cm tall and two cm in diameter. Analysis of paper zinc-air battery …

Heat Transfer From Plates, Leanza Trevino

Chemical Engineering Undergraduate Honors Theses

The purpose of this honors thesis is to create an experiment for the CHEG Lab I course. This is a continuation of work done by Alexa Moreno. She created an experiment to model free convection of a horizontal plate. In this report, free and forced convection of a vertical and horizontal plate, respectively are modeled. This report explains the motivation for creating this heat convection experiment, the results of performing the experiment, and provides recommendations for future work on this experiment. Lab handouts are included in the Appendix.

Greenhouse Gas Emissions From Milk Production In The Us, Cailey Cooper

Chemical Engineering Undergraduate Honors Theses

Life cycle assessment is performed to determine the environmental impacts of the life cycle of a product. In this study, the greenhouse gas emissions from milk production in the United States were calculated using a cradle-to-gate analysis. The dairy industry has a noticeable impact on the total greenhouse gas emissions in the US. Performing life cycle assessment provides information about the main emission sources in the life cycle which can spark innovative changes to reduce these emissions. The life cycle assessment was performed using the openLCA software and ReCiPe impact assessment methodology. The results indicated that 1.28 kg of carbon …

Interactions And Phenomena Between Disodium Cromoglycate And Polyelectrolytes, Brandon Tipton

Chemical Engineering Undergraduate Honors Theses

The interactions between polyelectrolytes and oppositely charged macroions have been widely studied, but few reports have been made on the interaction between chromonic mesogens and polyelectrolytes. Here, we report on the formation of liquid crystalline coacervates achieved by the liquid-liquid phase separation of an aqueous solution of negatively charged liquid crystal and polycations. As well as the occurrence of tactoids that form in the absence of these interactions. The liquid crystal that is experimented with is disodium cromoglycate, better known as DSCG. This acts as a negative charge that is paired with a variety of positively charged polyelectrolytes. The first …

Utilization Of Electrodeionization To Separate And Concentrate Cellobionic And Gluconic Acid, Andie Veeder

Chemical Engineering Undergraduate Honors Theses

Biofuel production is currently an expensive and inefficient process with many drawbacks. It is water and land intensive, competes with food production, and requires large energy inputs decreasing its relative sustainability. This paper explores the use of electrodeionization (EDI) to improve the biofuel process by separating and concentrating large, organic sugar acids that are important materials for the production of bioethanol. An EDI device was assembled for the purpose of separating and concentrating gluconic, cellobionic and lactobionic acid. Several trials were conducted and samples were analyzed to determine the success of this experiment. The results for the separation and concentration …

Characterizing And Quantifying Shear-Induced Hemolysis In A Hollow Fiber Membrane System, Siddhi Bhat

Chemical Engineering Undergraduate Honors Theses

Clinical studies have shown that patients undergoing renal replacement therapy are more susceptible to developing hemolysis, or the rupturing of red blood cells. Rapid hemolysis can cause symptoms such as anorexia, vomiting, and even death in severe cases. The aim of this study is to identify how shear stress within a hollow fiber membrane impacts the level of hemolysis that occurs. This allows for the optimization of the ultrafiltration membranes that are typically used for hemofiltration treatments. The variables being studied are the radii of hollow fibers, number of fibers, and volumetric flow rate of blood being circulated. Here, we …

Separation Of Organic Acids Through Direct Catalysis From Sugars, Katelyn Robinson

Chemical Engineering Undergraduate Honors Theses

Society relies on plastic products, whether they are single use or durable. A downside of plastic is that the most common type is a product of oil and oil is not only a limited resource but also a climate-damaging resource. Polylactic acid (PLA) is a bio-based, biodegradable plastic. However, the process of converting biomass to polylactic acid polymer has the largest environmental impact of the PLA production process, so alternative methods of conversion are needed (Moretti et al., 2021). The polylactic acid polymer can be made with lactic acid, which can be converted from glucose.

Response Of Cell Nuclei To Mechanical Strain In Synthetic Liquid Crystals, Sydnee Ehorn

Chemical Engineering Undergraduate Honors Theses

In this research project, induced mechanical stress on the cell nucleus via synthetic liquid crystals (LCs) was explored. Points of interest were the shape alterations and distortions of the nuclear envelope under strain, providing insight into the mechanics and stiffness of the cell nuclei. LCs are substances with structure and fluidity, and LCs in the nematic phase are aligned in a single direction without layers, inducing shear stress on inclusions. This study confirmed that an aqueous solution of 17.3 wt% disodium cromoglycate (DSCG) can successfully strain the nuclei of chicken red blood cells (RBCs) by examining the nuclear response to …

Tangential Flow Treatment Of Poultry Processing Wastewater Using Stainless Steel Ultrafiltration Membrane, Saubana Olorunsola Dada

Graduate Theses and Dissertations

The current treatment of poultry processing wastewater (PPW) requires a large expanse of land, takes time, and requires chemical usage. The wastewater is typically treated prior to discharge. Apart from aiming to reuse the treated water for non-potable activities, this project aimed to reduce the footprint and time required for PPW treatment. To intensify the PPW treatment units, we studied the possibility of replacing dissolved air floatation (DAF) with a stainless steel ultrafiltration membrane (SSUF). Combined PPW from all processing units taken before the first DAF and the second DAF were used for this study with no pretreatment. The SSUF …

Dpd Guided Insight On The Formation Process Of Polyethersulfone Membranes By Nonsolvent Induced Phase Separation And The Effects Of Additives, Eric Ledieu

Graduate Theses and Dissertations

Dissipative particle dynamics (DPD), a coarse grain simulation method, was applied to the membrane formation process of non-solvent induced phase separation (NIPS) to gain further insight on the mechanism of certain variables and how they affect the final morphology. NIPS involves two solutions, an organic polymer dissolved in an organic solvent colloquially called the dope and an aqueous coagulation bath, brought into contact with one another. The solvents then mix, causing the polymer to fall out of solution as an asymmetric membrane with a dense surface layer and a more open subsurface layer in response to the decreasing solubility. Polyethersulfone …

Polymeric Biomaterials Approaches For Engineering The In Vitro Cellular Microenvironment For Mscs, Mahsa Letter-Mahsa Haseli

Graduate Theses and Dissertations

Cell therapy is a technology that relies on replacing diseased or dysfunctional cells with healthy functioning ones. One of the cells used for such advanced therapies are stem cells, owing to their ability to differentiate into specific cells required for repairing damaged or defective tissues or cells. The majority of cell-based products are intended to transiently persist in the patient, secreting factors which then allow the patient’s body to heal; in these products, the cells are subsequently eliminated from the body. Furthermore, unique manufacturing platforms, in addition to novel commercialization strategies, will be required to create a successful, sustainable cell …

Local Il-10 Delivery Modulates The Immune Response And Enhances Repair Of Volumetric Muscle Loss Muscle Injury, Tai Huynh, Cassandra Reed, Zain Blackwell, Peyton Phelps, Luis Carlos Pinzon-Herrera, Jorge Almodovar, David A. Zaharoff, Jeffery Wolchok

Biomedical Engineering Faculty Publications and Presentations

This study was designed to test the hypothesis that in addition to repairing the architectural and cellular cues via regenerative medicine, the delivery of immune cues (immunotherapy) may be needed to enhance regeneration following volumetric muscle loss (VML) injury. We identified IL-10 signaling as a promising immunotherapeutic target. To explore the impact of targeting IL-10 signaling, tibialis anterior (TA) VML injuries were created and then treated in rats using autologous minced muscle (MM). Animals received either recombinant rat IL-10 or phosphate buffered saline (PBS) controls injections at the site of VML repair beginning 7 days post injury (DPI) and continuing …

Synthesis And Characterization Of Aerogels From Cellulose-Starch Mixtures For Advanced Packaging Applications, Angel Sagardui

Chemical Engineering Undergraduate Honors Theses

Biodegradable, highly porous, ultra-lightweight, and high-surface-area aerogels from microcrystalline cellulose (MCC) and corn starch mixtures were synthesized through a simple, green process, specifically supercritical carbon dioxide (SC-CO2) drying. Five weight ratios of samples were generated (pure MCC, 2:1 MCC-starch, 1:1 MCC-starch, 1:2 MCC-starch, and pure starch) and were then subjected to a variety of characterization experiments relating to textural and thermal properties as well as morphology, crystallinity, and chemical interactions. Overall, the 1:2 MCC-starch aerogel had the lowest density (0.04 g/cm3), and highest porosity (97%). Conversely, the pure MCC aerogel demonstrated the highest mechanical strength (Young’s modulus of 48.9 MPa), …

Enhancing Human Schwann Cells Reparative Behavior Using Heparin/Collagen Layer-By-Layer Coatings, Luis Carlos Pinzon-Herrera

Graduate Theses and Dissertations

When a peripheral nerve injury (PNI) occurs, the gold standard for tissue regeneration is the use of autografts. However, due to the secondary effects produced by multiple surgeries involved in the removal and implantation of autografts for very small lesions, it is possible to replace them with the use of Nerve Guide Conduits (NGCs). However, NGCs are limited to short lesions (less than 1 cm). This limitation is caused by the absence of compounds in the extracellular matrix (ECM) that autografts can provide. Since much of the regenerative process takes place on the NGC surface, our work aims to modify …

Life Cycle Assessment Of Novel Electrochemical Struvite Recovery In Municipal Wastewater Treatment At The Plant And U.S. Watershed Scales, Karla Morrissey

Graduate Theses and Dissertations

As the supply of phosphorus decreases, nutrient recovery in municipal wastewater treatment has become an important area of research. Recovery methods for phosphorus-containing fertilizers, such as struvite, and other products are currently being developed and assessed for their efficiency and economic feasibility. Potential environmental impacts from nutrient recovery are also being assessed as design for the environment is important, especially with regards to the eutrophying potential of phosphorus in phosphorus-limited freshwater aquatic systems. Life cycle assessment (LCA) is a tool that can be used to estimate potential environmental impacts of a product or service focusing on its entire life cycle. …

Surface-Driven Instabilities At Oil-Water Interfaces, Anelisse Claros Mendieta

Graduate Theses and Dissertations

Fluid-fluid interactions are such a wide area and can be observed in different scenarios such as geothermal systems, waterflooding of reservoirs, oil recovery, and water treatment processes. This thesis aims to deepen the understanding of fluid-fluid interactions which include Marangoni flows, charge related instabilities, and surface activity. This thesis studied the interactions of micrometer-sized droplets of an oil (toluene) with surfactant Di-(2-ethylhexyl) phosphoric acid (DEHPA) in the aqueous phase. One of the main goals is to understand several surface-driven instabilities and how those can be manipulated for future applications.Furthermore, this thesis aims to use these oil-surfactant droplets as a medium …

Using Copper Oxide And Zwitterions To Prevent Membrane Fouling And Optimizing Ultrafiltration Membrane Fabrication With Green Solvents, Cannon Hackett

Graduate Theses and Dissertations

Membrane fouling and sustainable production of membranes are two of the most important challenges in membrane science. Chapter 1 of this dissertation introduces these challenges and covers previous research that has been done in those areas. Additionally, the objectives of this dissertation are stated. In chapter 2, a study was done in which polyethersulfone ultrafiltration membranes were functionalized with copper oxide nanoparticles and zwitterions for the purpose of reducing fouling on the membrane surface. Characterization confirmed the attachment of each component to the membranes. Dead-end filtration was performed with water and bovine serum albumin solution and showed that the functionalization …

Development Of An Integrated Salt Cartridge-Reverse Electrodialysis (Red) Device To Increase Electrolyte Concentrations To Biomedical Devices, Efecan Pakkaner, Jessica L. Orton, Caroline G. Campbell, Jamie A. Hestekin, Christa N. Hestekin

Chemical Engineering Faculty Publications and Presentations

Emerging technologies in nanotechnology and biomedical engineering have led to an increase in the use of implantable biomedical devices. These devices are currently battery powered which often means they must be surgically replaced during a patient’s lifetime. Therefore, there is an important need for a power source that could provide continuous, stable power over a prolonged time. Reverse electrodialysis (RED) based biopower cells have been previously used to generate continuous power from physiologically relevant fluids; however, the low salinity gradient that exists within the body limited the performance of the biopower cell. In this study, a miniaturized RED biopower cell …

Prospective Life Cycle Assessment And Cost Analysis Of Novel Electrochemical Struvite Recovery In A U.S. Wastewater Treatment Plant, Karla G. Morrissey, Leah English, Greg Thoma, Jennie S. Popp Ph.D.

Chemical Engineering Faculty Publications and Presentations

Nutrient recovery in domestic wastewater treatment has increasingly become an important area of study as the supply of non-renewable phosphorus decreases. Recent bench-scale trials indicate that co-generation of struvite and hydrogen using electrochemical methods may offer an alternative to existing recovery options utilized by municipal wastewater treatment facilities. However, implementation has yet to be explored at plant-scale. In the development of novel nutrient recovery processes, both economic and environmental assessments are necessary to guide research and their design. The aim of this study was to conduct a prospective life cycle assessment and cost analysis of a new electrochemical struvite recovery …