Chemical Engineering Commons^™

Laboratory Analyzes For Determining The Antioxidant Activity Of Dried Red Hawthorn Fruits, T T. Raxmanova, N A. Afanaseva, Sh A. Sultanova

Technical science and innovation

This article analyzes the drying process of hawthorn fruit found in mountainous regions of our country. Since red hawthorn fruit is considered one of the main medicinal products, it is important to dry it while preserving its antioxidant properties. Blanching technology was used in a convective drying device for drying while maintaining the antioxidant properties of the object. In the process of blanching, a solution of ordinary water and citric acid was used. 1 and 1.5% solution of citric acid solution was selected. Blanching technology was used before drying the hawthorn fruit. Red hawthorn fruit was dried until 15% moisture …

Biochar Preparation, Investigation Of Properties And Application As A Low-Cost Adsorbent – A Review, A Kh Aripov, S M. Turabdzhanov, Sh Komilova, O Sh Qodirov, G S. Rakhimova, T V. Darabkova, Zh Aimenova, L S. Rakhimova

Technical science and innovation

An overview of current developments in biochar application in water and wastewater treatment is given in this article, along with a brief explanation of the sorption mechanisms for removing contaminants and the techniques for biochar preparation. In order to encourage the continued use of biochar in effective water and wastewater treatment, future research directions and environmental concerns about biochar are also presented.

Fluoride Technology For Processing Copper Production Slag At Almalyk Mmc And The Possibility Of Its Application For The Synthesis Of Highly Dispersed Silica Dioxide, M Sh Kurbanov, U M. Nuraliev, J A. Panjiev, S A. Tulaganov, M Ernazarov, L S. Andriyko

Technical science and innovation

A new pilot-plant equipment of an inclined rotary furnace for the processing of fluoroammonium silicon-containing materials has been developed and manufactured, which allowed sublimation of ammonium hexafluorosilicate, formed as a result of fluorination of processed raw materials, in two sections, with autonomous control of temperature and movement of raw materials. It is shown that the use of the created equipment for the processing of copper-smelting slags of the Almalyk MMC using fluoride technology makes it possible to separate amorphous silicon dioxide in the form of a dispersed powder from slags, extract iron and obtain a collective concentrate of precious, non-ferrous …

Selective Reduction Of Trivalent Iron In Zinc Ferrite Using Elemental Sulphur, B T. Berdiyarov, Sh T. Khojiev, J B. Ismailov, S T. Matkarimov, Sh O. Ismatov

Technical science and innovation

In this article, the process laws and technological aspects of the process of sintering the zinc-containing waste of a zinc plant with technical sulfur are considered. Zinc cake is obtained during the sulfuric acid leaching of calcined zinc ores and contains about 20% zinc and additional metals such as indium, cadmium, lead and copper. Copper cakes are somewhat difficult to work with because they contain ferrites and silicates belonging to acid-resistant spinels. Since the chemical and mineralogical composition of zinc production cakes consists of complex oxides, finding ways to process them is one of the actual topics of zinc metallurgy. …

Features Designing Special Clothing For The Hot Climate Of Uzbekistan, N Kh Mirtalipova, N A. Isaxujayeva

Technical science and innovation

This paper considers the issues of establishing the relationship between the properties of fabric, clothing design and the comfort of clothing; communication of the size of the human body, allowance for free fitting, modern design when developing the design of clothing; connection of the allowance for free fitting with a suitable air gap. A diagram is given that characterizes the dependence of the comfort of clothing on its design and properties of fabrics. A mathematical model of the processes of air exchange in the underwear space is considered, which will allow obtaining more complete information and establishing more stringent dependences …

Extraction Of Cellulose Nanocrystals From Secondary Paper Waste And Their Use In Paper Production, E A. Egamberdiev, S K. Norboyev

Technical science and innovation

Cellulose nanocrystals were obtained by hydrolysis process from waste paper industry. The result of Fourier transform infrared spectroscopy (FTIR) for nanocellulose showed that no new chemical bonds were formed during the preparation of nanocellulose. The results of X-ray diffraction showed that the crystallinity of the macules produced in the treated and untreated paper industry was 66% and 73.8%, respectively. The results of nanocellulose revealed a natural needle-like fiber with a length of 300 nm to 600 nm, a diameter of 10 nm to 30 nm, and an aspect ratio in the range of 10 to 60. It was found that …

Obtaining Wrapping Paper Used In Furniture Wrapping And Quality Delivery And Determining Its Quality Indicators, E A. Egamberdiyev, A R. Makhkamov, G R. Rakhmonberdiev

Technical science and innovation

Composite materials samples have been obtained from cellulose and bazalt fibers based on cellulose-containing plants. The properties of paper samples have been studied: the amound of cellulose, the amound of ash, water absorption and breaking load. Gained results show that the composite material with the addition of basalt fibers is more durable. Half-finished cellulose fibers obtained from basalt, straw and wastepaper are more prouse than ones obtained from cotton plant

Study Thermodynamics Of The Magnetite Sulfidation In Copper Smelting Processes, A S. Khasanov, Q T. Ochildiyev, B T. Berdiyarov, Sh T. Khojiev, S T. Matkarimov

Technical science and innovation

The article discusses the problem of reducing the amount of magnetite in the impregnation of copper in the slag generated after the conversion process in copper production in the furnace to reduce slag. Accordingly, a method of lowering magnetite by sulfidation has been proposed, using elemental sulfur as a local and relatively inexpensive sulfiding-reducing agent. The mechanism of chemical phenomena occurring in the interaction regions of magnetite and elemental sulfur has been developed. Based on the mechanism of chemical reactions produced, each chemical reaction that occurs in the process is analysed from a thermodynamic point of view. According to the …

Increase The Nutritional Value Of Pasta With Grains And Pulses, D D. Mirkhodjaeva, E Sh Sanaev

Technical science and innovation

The main goal of this study is to develop a paste formulation containing a mixture of ginger, lemon and mint powder, as well as a combination of legumes and cereals with high nutritional value. This will expand the range of pasta. The task of achieving high quality and economic efficiency is solved by improving a number of technological processes and applying innovative methods. The effectiveness of using innovative methods of freeze-drying and microwave drying is shown in comparison with the process of drying instant pasta by frying them in vegetable oil.

Recovery Of The Recovery Zinc Concentrate In A Weakly Reducing Gas Atmospheric Environment, B T. Berdiyarov, S T. Matkarimov, J B. Ismailov

Technical science and innovation

This article provides information on the formation of substances resulting from the roasting of sulfide-zinc concentrates, which negatively affects the course of subsequent stages. The resulting calcine was sent for reduction roasting in a weakly reducing inert gas atmosphere. Based on this, it can be assumed that the impact on the calcine of "weak" energetic inert gases the reduce minimises or formation of ferrites and zinc silicates. Since the principal primary using agent is gaseous H₂, (hydrogen) in a mixture of gases with a weak reducing environment, all redox reactions occurring in total reduction were studied. The course …

Determination Of The Heating Time Constant For Root Crops, Z K. Ergasheva, Beraat Ozcelik

Technical science and innovation

Convective drying refers to one of the energy-intensive processes used in chemical, woodworking, food and other industries. Therefore, in modern conditions, when there is a growing shortage and an increase in energy tariffs, it is important to develop and apply new effective methods of drying wet materials in industrial production, create high-performance drying equipment, improve the operation of existing dryers, which will contribute to the rational use of natural resources, reduce the cost of finished products and increase the competitiveness of production. Root crops are plants in which nutrients are concentrated in tubers or roots. Jerusalem artichoke refers to sugar-containing …

The Effect Of Chitosan On The Surface Properties Of Cellulose-Based Paper Obtained From The Stem Of Flaxseed, E A. Egamberdiev, Y T. Ergashev, Kh Kh Khaydullaev, G Y. Akmalova, G R. Rakhmonberdiev

Technical science and innovation

This paper examines the effects of chitosan, starch, and polyvinyl alcohol (PVA) to improve the surface properties of cellulose-based paper obtained from local raw materials. The polymers are incorporated into the paper polythene by spraying. The results showed that the addition of chitosan to paper polythene, which is made of cellulose fibers, has an improvement in surface properties compared to the effect of other additives. The degree of exposure of starch coincided with the degree of exposure of chitosan, but it resulted in a decrease in the water absorption potential of the paper compared to chitosan at the same concentration. …

Development Of Asphalt-Resin-Paraffin Deposits Solvent, Gulmira Todjiyeva, F Badriddinova, M Tursunov, H Kadirov, E Cherkasova

Technical science and innovation

A solvent which is a mixture of aromatic hydrocarbons of the C₉ fraction and aliphatic alcohols in a 1:1 ratio, a nonionic surfactant in an amount of 1 - 3% by weight has been developed. It leads to an increase in the dissolving and washing capabilities of the solvent for more than 2 times in relation to paraffin-type AS. The ability of the chemical composition, which is a solvent composition, to have a depressant-dispersing effect in relation to paraffin-type AS has been determined.

Despite a large number of studies devoted to the development of technologies for the removal of …

Methods Of Improving Complex Cleaning Of Sand Plugs In Khodjaobad Underground Gas Wells, Abdulaziz Murodov, Muhriddin Muydinov, Saidaziz Khabibullaev, Aziz Abidov

Technical science and innovation

The purpose of the study is to develop recommendations for improving the methods of cleaning complex sand plugs in wells of underground gas storage. To organize the correct and efficient use of underground gas storage, the bottom of wells must be kept clean. The article develops recommendations on the use of optimal methods for cleaning wells from complex sand jams on the example of Khujabad UGS. In addition, recommendations were developed for the operation of production wells in the horizons of the XX-XXI-XXII underground gas storage of Khujabad

Research Of New Fireproof Supplied Polymer Composites Based On Epoxy Resin For Metal Structures, Kuvondiq Murtazaev, F.N. Nurkulov, D.N. Mukhiddinov, M.T. Аbdirova

Technical science and innovation

In the article proposes new compositions based on fire retardant expanded polymer composites of epoxy resin ED-20 and phosphorus-containing oligomers, catalysts, aluminum hydroxide and nitrogen-containing compounds.

The obtained sample of fire retardant expanded polymer composites based on epoxy resin, as well as the initial substances, were investigated by IR spectroscopy (Nicolet 5700), thermogravimetric analysis (TG) (SDT Q600) of physical and chemical properties and determination of fire retardant efficiency according to GOST R 53295-2009.

Infrared spectroscopy has been used to determine the bends and epoxy groups that characterize composites, as well as to determine the frequencies of phosphorus, nitrogen, and metal-containing …

Uncertainty Of The Ultrasonic Method For Determining The Strength Of Concrete, Ortagoli Sharipovich Hakimov, Zamira Khudoyberdiyevna Ernazarova

Chemical Technology, Control and Management

The issues of measuring the strength of concrete by the method of surface sounding by ultrasound are considered. A measurement model and formulas for estimating the total standard measurement uncertainty, information about the standards used, measurement tools and methods, and environmental parameters are given. Information about the estimation of uncertainty in the form of "eight steps", such as: measurement task; mathematical model of measurement; analysis of input values; observation results; correlations; uncertainty budget; expanded uncertainty; measurement result. It has been established that the uncertainty of type B of the ultrasonic method for determining the strength of concrete is much less …

Mathematical Modeling Of Processes Of Diagnostics Of Technical And Technological Objects, Azizbek Nodirbekovich Yusupbekov, Khurshid Salim Ugli Turayev

Chemical Technology, Control and Management

The work is an introduction to the technical diagnostics of technical (or technological) objects. It discloses the basic concepts and definitions of the reliability of dynamic systems as objects of diagnostic reference knowledge and their diagnosis. Structural schemes of diagnosing objects with individual and combined channels of influence are analyzed. Questions of rational construction of base of reference knowledge are stated.

Virtual Analyzers For Increasing The Intelligence Of Industrial Process Control Systems, Umidjon Abdimajotovich Ruziev Phd, Marufjon Kobuljanovich Shodiev

Chemical Technology, Control and Management

It is shown that the development and implementation of virtual analyzers of the quality of the final industrial products is an effective tool for increasing the efficiency of industrial production. The methodology and stages of development of virtual analyzers for predicting the quality of products, monitoring non-measurable or difficult-to-measure parameters of continuous and periodic technological processes are considered, and issues of supporting and adapting a virtual analyzer during its operation without restructuring are also considered.

Developing Advanced Process Control System For Manufacturing Processes Using Virtual Analyzer, Elyor Erkinovich Samadov

Chemical Technology, Control and Management

This research reflects outlines the main potential features of Advanced Process Control (APC) systems for improved control of technological processes and production. It is shown developing APC systems using a virtualized analyzer (VA) is a very effective technique to increase the efficiency of industrial production. This research reflects the main steps of generating VA as part of the APC system and also describes the key features of each step-in terms of analyzer synthesis.

Design Lifecycle Management Of Technological Processes, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

The issues of life cycle management of design processes of complex technological processes are considered. An analysis of works devoted to the automated design of technological processes and industries, product life cycle management, and the use of predominant modeling in design is presented. A structure for the implementation of the design of technological processes is proposed and it’s components are described. An algorithm is proposed to reduce the life cycle of the design of a technological process. The sequence of selection of the most optimal project options with the help of the proposed algorithm is described. It is shown that …

Predictive Analysis And Synthesis, Modeling And Control Of Complex Technological Processes And Systems, Zhahongir Sherboyevich Bekqulov

Chemical Technology, Control and Management

Consider the theoretical underpinnings of practically predictive analysis and synthesis, modeling and automatic control of complex chemical technological processes and systems, and the evolution of advanced (or advanced) APC (Advanced Process Control) control of technological processes and industries. The current state of industrial automation systems and the characteristics of their deployment are highlighted. The features of each stage of the analysis and synthesis of APC - advanced process control for complex dynamic objects are disclosed. The real situation and features of the implementation of industrial automation systems of industrial enterprises are reflected.

New Transformer Changer Static Characteristics Measuring Angle Silences Difference, Sultan Faizullayevich Аmirov, Nurulla Raxmatullayevich Yuldashev

Chemical Technology, Control and Management

Presented the specific features of the new transformer converter, which measures the difference in angular displacement, and examines the nonlinearity levels of static characteristics, sensitivity and static characteristics. Studies have shown that in a new measuring device, where one of the two moving parts consists of a magnetic conductor made in the form of an Archimedean spiral made of ferromagnetic material, the balance of the magnetic bridge changes not only depending on the angle of rotation of it’s shoulder resistances. the current is disturbed by the change in the magnitude of the combined air gap depending on the angle of …

Quality Control Of Combustion Of Gaseous Fuel In Furnaces, Azamat Toirovich Rajabov

Chemical Technology, Control and Management

The issues of research and development of systems for monitoring the availability and quality of the process of fuel combustion in industrial furnaces are interpreted. The perspective of using new elements in control systems - communication sensors for the presence and quality in gas-burning installations and furnaces are shown. A method has been developed to control the optimal aeration coefficient based on the extreme of the total integral amplitude-frequency characteristic of the flame conductivity pulsations, which makes it possible to control the quality characteristics of gas-burner devices and control the ratio of the components of the combustible mixture with high …

Algorithm For Calculating The Parameters Of A Multi-Position Electromagnetic Linear Mechatronic Module, Nazarov Khayriddin Nuritdinovich, Matyokubov Nurbek Rustamovich, Temurbek Omonboyevich Rakhimov

Chemical Technology, Control and Management

Currently, in the world in the field of science, engineering and technology, including in mechatronics and robotics, the creation of multi-coordinate mechatronic systems that perform power and control functions is becoming of paramount importance, this is due to a number of important positive qualities of the systems, such as simplicity and compactness of the design, the possibility of obtaining significant efforts, high accuracy and stability of the establishment of fixed positions, ease of control and high reliability. This article presents the calculation of the parameters of multi-position mechatronic modules based on linear execution elements. In the construction of this model, …

Regular Algorithms For Adaptive Identification Of Linear Non-Stationary Systems, H.Z. Igamberdiyev, H.I. Sotvoldiev, U.F Mamirov

Chemical Technology, Control and Management

The article deals with the formation of regular algorithms for adaptive parametric spline identification of linear non-stationary systems. Analyzed the issues of constructing adaptive identification of continuous linear non-stationary systems with monotonic and sign-constant parameters. In this case, in a non-stationary system, the entire observation interval is in some way divided into sub-intervals. Identification is carried out at each of the parameter constancy intervals, while the parameter matrix is re-evaluated for the next interval. The input data of the system are determined with an error depending on the error of approximating the state of the system by splines and approximating …

Control Of The Facial Design Process Of Innovative Developments, Yusuf Shodiyevich Avazov

Chemical Technology, Control and Management

The role and place of visual design in the process of creating an innovative development have been stated. It is shown that the tasks of the face stage of the product life cycle are devoted to systemic issues, in the center of which is the resolution of the contradiction between the desired and the achievable. The first is determined by the need to create a new system of a higher level, and the achievable is determined by the level of development of science, technology and production technology, as well as by the conditions of operation and repair. The work is …

Information Software And Devices For Energy Efficiency Management And Control, Narzullo Nuriddinovich Mirzoyev

Chemical Technology, Control and Management

The article provides information on modern methods of management and control of energy efficiency at industrial enterprises. This includes the software needed to manage and monitor energy efficiency, as well as the formation of a database. In addition, a structural diagram of an intelligent power monitoring system has been developed and its elements have been selected. Describes the principle of operation of an intelligent measuring device, its connection to the network, conversion of analog signals to digital, channels and ranges of signal transmission, metrological characteristics. The article details the capabilities and benefits of smart meters.

Control System Synthesis With Self-Adapting Regulator By Interactive Adaptation Method, Isamiddin Xakimovich Siddikov, Renata Nikolayevna Izmaylova

Chemical Technology, Control and Management

The research results on the creation of a self-adapting control system for a nonlinear dynamic object based on the theory of intelligent control using interactive adaptation methods have been presented. The lack of an accurate description and the nonlinearity of the dynamic properties of the object under study, the presence of mutual influence of cross communication channels in the control circuits, as well as the influence of various types of uncertainties associated with the lack of a priori information about the process, significantly complicate the solution of the problem of synthesis of highly efficient control systems for dynamic objects, which …

Analysis Of Water Treatment Methods For Circulating Water Supply In Industrial Plants, Djalolitdin Paxritdinovich Mukhitdinov, Nilufar Abdusomi Kizi Yunusova

Chemical Technology, Control and Management

This scientific paper deals with the problem of extracting Ca2+ and Md2+ salts from water in order to prevent the formation of scale on the heating surfaces of heat exchange equipment. The features, advantages and disadvantages of chemical, membrane and ion exchange methods of water treatment have been evaluated. It has been shown that the chemical method of water purification can be used only for the preparation of industrial water at large stations (at the same time, high residual hardness prevails in the water, the equipment has low productivity), and the membrane method requires pretreatment of water, creation of overpressure …

Algorithms For Modal Control Synthesis In Multi-Dimensional Dynamic System, Husan Zakirovich Igamberdiev, Jasur Usmonovich Sevinov, Oqila Husanovna Boyeva

Chemical Technology, Control and Management

Algorithms for the synthesis of modal control of a multidimensional dynamic system with concentrated parameters in the state space have been presented. The problems of modal control of a multidimensional dynamic system have been formulated for the case when the matrix representation of a closed system has a simple structure. The conditions for the solvability of the problem of modal control of a multidimensional dynamic system by means of output feedback have been obtained. To give numerical stability in the procedure of pseudo-circulation of matrices, it is proposed to use the concepts of regular methods in the form of scalar …