Chemical Engineering Commons^™

Scaling Relationships Across Chemically Related Adsorbates For Fast Screening Of Alloy Catalysts For Propane Dehydrogenation, Anne Esther Serban, Ranga Rohit Seemakurthi, Brandon C. Bukowski, Jeffrey Greeley

The Summer Undergraduate Research Fellowship (SURF) Symposium

A catalyst is a material which speeds up the rate of a specific reaction. A reaction that is of significant importance to the chemical industry is the selective transformations of light alkanes (ethane, propane), which are largely available in shale gas, to olefins. These olefins can then be converted into higher-value chemicals, materials, and fuels. However, there are several undesired reactions that take place alongside the main dehydrogenation reaction, so a catalyst of high selectivity is desired. Apart from the industrially used PtSn catalyst, work by our experimental collaborators has shown that various other Pt and Pd alloys (In, Zn) …

Bringing Particle Scale Properties Into Descriptions Of Powder Behavior Through The Enhanced Centrifuge Method, Andrew R. Roginski, Caralyn A. Coultas-Mckenney, Contessa G. Norris, Stephen P. Beaudoin

The Summer Undergraduate Research Fellowship (SURF) Symposium

Inconsistent powder behavior introduces problems such as agglomeration, poor flowability, dust hazards, and segregation that decrease efficiency in powder processing environments. Understanding how a powder interacts with a surface at the particle scale provides insight into how to accommodate individual particle properties and avoid process deficiencies. This project uses an enhanced centrifuge technique to evaluate the adhesion between a stainless-steel surface and a powder comprised of fluorescent particles. Particles are deposited onto stainless steel plates which are rotated in a centrifuge. The adhesion properties are monitored by tracking the rotational speed at which particles of a known size are removed …

Gender And Participation In An Engineering Problem-Based Learning Environment, Laura Hirshfield, Milo D. Koretsky

Interdisciplinary Journal of Problem-Based Learning

The use of problem-based learning (PBL) is gaining attention in the engineering classroom as a way to help students synthesize foundational knowledge and to better prepare students for practice. In this work, we study the discourse interactions between 27 student teams and two instructors in an engineering PBL environment to analyze how participation is distributed among team members, paying particular attention to the differences between male and female students. There were no statistically significant differences between the amount that male and female students spoke; however, stereotypical gender roles and traditional gendered behavior did manifest in the discussion. Also, regardless of …

Constructing Slow Sand Filters: Engineering Students’ Experiences In San José De Playón, Bolívar, Colombia, Sol Park, Sanyukta Gokhale, Kaylyn Colinco

Purdue Journal of Service-Learning and International Engagement

Sol Park, Sanyukta Gokhale, and Kaylyn Colinco were members of a Global Design Team (GDT) involved in providing innovative solutions to drinking water treatment in rural areas of developing countries. The immediate goal of the GDT in May 2016 was to deliver large slow sand filters (SSFs) to a rural school in Colombia. The experience placed the students in a small town 80 km (~50 miles) south of Cartagena, Colombia, called San José de Playón. The town pumps water from the Arroyo Reservoir, which is then consumed by the citizens and students at the local school (the only one in …

Molecular Structure And Confining Environment Of Sn Sites In Single-Site Chabazite Zeolites, James W. Harris, Wei-Chih Liao, John R. Di Iorio, Alisa M. Henry, Ta-Chung Ong, Aleix Comas-Vives, Christopher Coperet, Rajamani Gounder

School of Chemical Engineering Faculty Publications

Chabazite (CHA) molecular sieves, which are industrial catalysts for the selective reduction of nitrogen oxides and the conversion of methanol into olefins, are also ideal materials in catalysis research because their crystalline frameworks contain one unique tetrahedral-site. The presence of a single lattice site allows for more accurate descriptions of experimental data using theoretical models, and consequently for more precise structure-function relationships of active sites incorporated into framework positions. A direct hydrothermal synthesis route to prepare pure-silica chabazite molecular sieves substituted with framework Sn atoms (Sn-CHA) is developed, which is required to predominantly incorporate Sn within the crystalline lattice. Quantitative …

Novel Synthesis Of Cigs Nanoparticles For Scalable, Benign Inks For Solution Processed Solar Cells, Jacob Fields, Ryan Ellis, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

One potential production route to high efficiency, low cost, photovoltaics (PVs) which was explored is Copper Indium Gallium Sulfide (CIGS) nanocrystal inks for solution processed PVs. A common CIGS nanocrystal ink synthesis utilizes ligands—molecules attached to the particle surface—for colloidal stability, size control, and shape control. It is desirable to devise a novel synthesis which will incorporate a ligand that allows suspensions in more benign solvents than current methods—a desirable characteristic for large scale production. In order to develop the aforementioned synthesis of CIGS nanoparticles, an optimization study of synthesis parameters was performed. Selection of an appropriate solvent, and sulfur …

Separation Of Rare Earth Elements From Aluminum Using Ion-Exchange Chromatography, Shabrina Nurfitriani, Hoon Choi, Nien-Hwa Linda Wang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Demand of rare earth elements (REEs) has increased tremendously due to their key roles in electronics and emerging technology. Recently, new technology was developed at Purdue to extract REEs from coal fly ash. This study is focused on the separation of aluminum ions (Al), a major impurity in the extract, from REEs. The goal is to test the feasibility of an ion-exchange process for separating REEs from a highly-concentrated Al solution. First, we reduced the resin particle size to decrease dispersion and diffusion effects, to increase resin productivity, and to reduce the amounts of REEs and the ion-exchange resin required …

Carbon Removal And Optoelectronic Property Tuning In Copper Arsenic Sulfide Thin Films Through Ligand Exchange And Alloying, Louis R. Schroeder, Scott Mcclary, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Solution processed thin film solar cells are attractive alternatives to conventional energy sources due to low waste generation, flexibility in substrate choice, and scalability. The novel semiconductor Cu3AsS4 in the enargite phase has a near ideal band gap of 1.4 eV and has earth abundant constituent elements; yet single-junction solar cells have yielded low efficiencies due to a secondary carbonaceous phase present, among other issues. This carbonaceous phase may be eliminated by exchanging the carbonaceous ligands with molecular metal chalcogenides. To characterize the ligand exchanged particles, UV-Vis-NIR spectroscopy, Raman spectroscopy, X-ray diffraction, scanning electron microscopy, energy dispersive X-ray spectroscopy, and …

Surface Tension, Interfacial Tension And Phase Behavior: Interactions Of Surfactant/Polymer Solutions With Crude Oil, Michael A. Steinerd, Jaeyub Chung, Bryan W. Boudouris, Nathan C. Schultheiss, Elias I. Franses

The Summer Undergraduate Research Fellowship (SURF) Symposium

Advanced oil recovery techniques, beyond primary and secondary recovery, are required in order to produce additional oil in existing reservoir rock. Here, we evaluated a combination of polymer and surfactant aqueous solutions, in order to generate a working fluid capable of achieving high-performance enhanced oil recovery (EOR). In this recovery process, surfactant is added to the water flooding mixture in order to lower the interfacial tension between the oil and the water. If the interfacial tension can be decreased by ~1,000-fold, then the aqueous solution can mobilize and displace the oil. Moreover, a polymer is added to the aqueous solution …

Capsule-Based Dropwise Additive Manufacturing With Pharmaceutical Suspensions, Kaitlyn N. Buck, Andrew J. Radcliffe, Gintaras V. Reklaitis

The Summer Undergraduate Research Fellowship (SURF) Symposium

Current manufacturing of pharmaceutical products focuses on creating a standard dosage of the active pharmaceutical ingredient (API); however, dosages often need to be altered or customized to account for a patient’s age, weight, comorbidity, and other genetic factors. A potential method for dispensing precise dosages of API suspensions through dropwise addition is detailed in the following paper. By using a drop-on-demand printing rig, a series of suspensions comprised of varying volume fractions of a micron-scale API in a carrier fluid were printed, and individual drop volumes were analyzed using high-resolution imaging. From this, capsules with 1 mg dosages and 100 …

Modeling The Aqueous-Phase Copper Ion-Exchange Behavior Onto Ssz-13 Zeolites, Brian N. Bayer, Rajamani Gounder, Trevor M. Lardinois

The Summer Undergraduate Research Fellowship (SURF) Symposium

Copper-exchanged zeolites are utilized as catalysts for the selective catalytic reduction of nitrogen oxides, which are atmospheric pollutants found in diesel engine exhaust. The total amount of copper ions and the types of copper species (Cu(II) or Cu(II)OH) exchanged onto a zeolite can be varied. Copper is exchanged onto SSZ-13 (an aluminosilicate zeolite with the chabazite topology) during a process known as aqueous ion exchange, where the zeolite is mixed in a copper-containing solution. The distribution of copper on SSZ-13 is influenced by exchange conditions, including the molarity, temperature, and pH of the copper solution. The effect of exchange conditions …

Metabolic Comparison Of Wild-Type And Transgenic Synechocystis Pcc 6803 Cyanobacteria, Ian A. Mcluckey, John A. Morgan, Joel Yu King Hing

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Calvin-Benson (CBB) cycle is an essential part of nature. This phenomenon allows carbon molecules in carbon dioxide from the atmosphere to be converted into useful energy in the form of sugars. Cyanobacteria are single-celled organisms capable of utilizing energy from sunlight to drive this cycle and are also readily engineered. In hopes of improving this cycle, we compared a wild-type version of the Synechocystis PCC6803 cyanobacteria to an engineered version overexpressing the enzyme FBA (fructose-biphosphate aldolase), called 70 glpX, to deduce how the overexpressing strain is able to be more photosynthetically efficient. To do this, comparative metabolomics were done …

Modal Phonon Transport Across Interfaces By Non-Equilibrium Molecular Dynamics Simulation, Yang Zhong, Tianli Feng, Xiulin Ruan

The Summer Undergraduate Research Fellowship (SURF) Symposium

Phonons represent the quantization of lattice vibration, responsible for heat transfer in semiconductors and dielectrics. Phonon heat conduction across interfaces is crucially important for the thermal management of real-life devices such as smartphones, electric vehicles, and satellites. Although recent studies have broadly investigated spectral phonon contribution to lattice thermal conductivity, the mechanism of phonon modal transport across interfaces is still not well-understood. Previous models, including the acoustic mismatch model (AMM) and diffuse mismatch model (DMM), only consider elastic process while neglecting inelastic phonon contributions. Herein, we employ spectral Non-Equilibrium Molecular Dynamics Simulation (NEMD) to probe the temperature and heat flux …

Design Of Nitroxide-Based Radical Polymer Materials For Electronic Applications, Martha E. Hay

Open Access Theses

Radical polymers represent a new class of organic electronic materials that rely on an oxidation-reduction (redox) reaction to transport charge. That is, stable radical sites pendant to the polymer backbone communicate electronically through a rapid oxidation-reduction reaction. This redox mechanism has previously been established as effective for charge-storage applications (e.g., secondary batteries). When applied in the solid state, radical polymers demonstrate electrical conductivity on par with that of first-generation conjugated polymer electronic materials. This initial success has prompted interest in developing design rules for radical polymers. Specifically, this thesis explores the impact of radical density in a polymer …

Degradation Of High Performance Polymeric Fibers: Effects Of Sonication, Humidity And Temperature On Poly (P-Phenylene Terephthalamide) Fibers, Nelyan Lopez-Perez

Open Access Theses

High performance fibers are characterized by properties such as high strength and resistance to chemicals and heat. Due to their outstanding properties, they are used on applications under harsh environments that can degrade and decrease their performance. Fiber degradation due to different chemical and mechanical factors, is a process that begins at a microstructural level. Changes in the polymer’s chemical or physical structure can alter their mechanical properties. Knowledge of the structure-properties relationship and the effects of environmental chemical and physical factors over time, is crucial for the improvement and development of high performance fibers.

In this study ballistic fibers …

Fundamental Studies Of Flame Propagation In Lean-Burn Natural Gas Engines, Zhiyan Wang

Open Access Dissertations

Lean-burn natural gas engines offer enhanced thermal efficiencies and reduced soot and NOx emissions. However, cycle-to-cycle variability in combustion that can result from unreliable ignition, variability in equivalence ratio and quenching is a challenge. Reliability of ignition can be improved by employing a dual-fuel ignition strategy in which a small quantity of diesel fuel is injected to initiate ignition. Computational studies of n-heptane/methane-air mixing layers are performed to provide insight into the fundamental physics of dual-fuel ignition. The results show that the characteristic time required for steady premixed flame propagation has three components: time for autoignition to occur, time for …

Numerical Simulation On The Combustion Characteristic Of Iron Ore Sintering With Flue Gas Recirculation, Gan Wang, Zhi Wen, Guofeng Lou, Ruifeng Dou, Xunliang Liu, Fuyong Su, Sizong Zhang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Molecular Dynamics Studies Of The Adsorption Behavior Of Methyl 3-((2-Mercaptophenyl)Imino)Butanoate As Corrosion Inhibitors On Copper Surface, Jianlin Sun, Sang Xiong, Xudong Yan, Yang Xu

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Study Of Poisoning Mechanism Of Hg And As On V2o5–Wo3/Tio2 Scr De-Nox Catalysts, Qingcai Liu, Ming Kong, Lu Yao, Shan Ren, Jian Yang

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Numerical Simulation Of Residual Stress In Low-Temperature Colossal Carburized Layer On Austenitic Stainless Steel, Dongsong Rong, Yong Jiang, Jianming Gong, Yawei Peng

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

3d Fe Modelling Of Die Stress And Wear In Non-Isothermal Forging Of Ti–6al–4v Turbine Blade, Shiyuan Luo, Dahu Zhu, Lin Hua, Dongsheng Qian, Sijie Yan

The 8th International Conference on Physical and Numerical Simulation of Materials Processing

No abstract provided.

Amine-Thiol Solution Route Method For Fabricating Cdxzn1-Xs Thin Film Solar Cells, Preston D. Fernandez, Xianyi Hu, Carol Handwerker, Rakesh Agrawal

The Summer Undergraduate Research Fellowship (SURF) Symposium

Cadmium zinc sulfide, CdZnS, is a promising material for the buffer layer of thin film solar cells because the alloy is considerably more cost effective and more optimizable than pure cadmium sulfide, CdS, in terms of band gap. The current fabrication methods of the buffer layer often require expensive equipment or produce undesirable impurities in the alloy. This study investigates a cost effective and scalable solution route method to synthesize the CdZnS buffer layer. Molecular precursors of CdZnS were dissolved in varying molecular ratios of cadmium and zinc in a mixture of hexylamine and propanethiol. The resulting alloys produced were …

Hydrophobic Zeolites For Applications In Adsorption And Catalysis, Zige Huang, Michael Cordon, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

Lewis acidic zeolites such as Sn-Beta are commonly studied for use as selective catalysts for glucose isomerization to fructose in liquid water. Glucose to fructose isomerization is a critical reaction for lignocellulosic biomass upgrading, which converts abundant and renewable feedstocks into commercially desirable fuels and chemicals.

Industrial applications require catalysts that maintain optimal reactivity over long time scales, yet at typical reaction temperatures, Lewis acidic Beta zeolites are known to deactivate in liquid water through poorly understood mechanisms. Recent work in our group has shown that interactions between water and Sn-Beta zeolites can cause leaching of active Sn sites from …

Exploring The Effects Of Aromatic Molecules In Chemical Enhanced Oil Recovery, Jacob M. Crain, Cliff Johnston, Rituraj Borgohain

The Summer Undergraduate Research Fellowship (SURF) Symposium

Chemical enhanced oil recovery (cEOR) methods are being used as a viable contributor to the world’s growing energy demands. Due to the complex chemical composition of crude oil, attempting to optimize the surfactant concentration and salinity of formulations is done empirically. This process can be very time intensive due to the wide variety of surfactant structures available for cEOR. Surfactant selection is typically done by matching the average chain length of the oil with that of the surfactant. In this study, we are trying to understand how aromatic structures present in Illinois Basin crude oil interact with surfactants. This will …

Continuous Ligand-Assisted Elution Chromatography Applied To Separation Of Rare Earth Elements, Jeremy A. Weinstock, David M. Harvey, N.-H. Linda Wang

The Summer Undergraduate Research Fellowship (SURF) Symposium

Rare earth elements (REEs) are metals used to make many valuable products such as magnets and electronics. Following their extraction from larger materials, REEs are to be separated into their individual components as high purity is required for product manufacture. Purification is very difficult because most (15/17) of the REEs are lanthanides (Ln’s) and Ln ions have the same valence and similar atomic radii. The current industrial process for purifying REEs involves using toxic solvents to perform a series of liquid-liquid extractions. Ling and Wang (2015) proposed a ligand-assisted batch chromatography process to purify Ln’s. The latter approach is a …

Quantification And Characterization Of Aluminum Distributions In Commercial Beta And Mordenite Zeolites By Cobalt Exchange, Rebecca L. Reitzel, Claire T. Nimlos, Rajamani Gounder

The Summer Undergraduate Research Fellowship (SURF) Symposium

The aluminum distribution throughout the zeolite framework determines the structural, ion-exchange and catalytic properties of the zeolite. Several methods have been proposed to control the Al distribution, but in order to accurately assess these methods a procedure is needed to quantify Al distribution in various zeolite frameworks. Co²⁺ ions exchange onto the zeolite framework at Al pairs, and atomic absorbance spectroscopy (AAS) can be used to quantify the number of exchanged Co²⁺ ions and, in turn, the overall number of Al pairs. Each framework exhibits differences in pore size and channel configuration which affect the equilibrium conditions needed …

Production Of Porous Alginate Substrates Via Membrane Emulsification For Pharmaceutical Applications, Genesis D. Correa-Rivera, David A. Acevedo, Zoltan K. Nagy

The Summer Undergraduate Research Fellowship (SURF) Symposium

The Food and Drug Administration (FDA) released in 2013 a report that established the pharmaceuticals current good manufacturing practices for the 21^st century. This report encourages the creation of new technology in the pharmaceutical industry. Therefore, this research aims to develop a reliable method to produce porous polymers particles to be used in a novel continuous crystallization in porous substrate. The aim of the current work is to create porous polymer microspheres with uniform particle size distribution using a commercially available membrane emulsification system. In the present study, the emulsification was made using a dispersed phase composed of miglyol …

Effect Of Conveying And Distributive Mixing Elements On Breakage Phenomenon In Twin Screw Granulation, Jiayu Li, Shankali U Pradhan, Carl Wassgren

The Summer Undergraduate Research Fellowship (SURF) Symposium

Twin screw wet granulation (TSG) is gaining more attention and becoming an important process in the pharmaceutical industry. The process is widely implemented because of its flexibility, short residence time, and small equipment footprint. Past studies have shown that screw elements can have a significant impact on the performance of the TSG process. In addition, these studies identified that breakage of wet mass is a significant step in the process. Currently there is no literature that focuses on the effect of each screw element on the breakage process. In this work, experiments have been designed to isolate the breakage process …

Pt-Cu Catalysts For Catalytic Dehydrogenation Of Alkanes For Energy Production, Zixue Ma, Zhenwei Wu, Jeffrey T. Miller

The Summer Undergraduate Research Fellowship (SURF) Symposium

More active, selective and stable catalysts are in demand to increase the yields of olefins production from light alkane dehydrogenation. Cu was reported to promote Pt catalysts and Pt-Cu catalysts has been shown to achieve increased olefin selectivity and decreased deactivation rate. Pt-Cu catalysts with different Pt:Cu molar ratios may have different crystal structure and performance. This study seeks to understand of the promotion effect of Cu on Pt alkane dehydrogenation catalysts. Four different Pt-Cu catalysts with different atomic ratios were prepared and tested for propane dehydrogenation at 550℃. Synchrotron in situ X-ray diffraction and X-ray absorption spectroscopy are used …

Enzymatic Liquefaction Of Untreated Corn Stover, Neal N. Hengge

Open Access Theses

There is an ever increasing need for renewable alternatives to fossil fuels derived from petroleum. This makes feedstocks in the form of lignocellulosic biomass attractive substrates for the production of ethanol and value added chemicals. However, the economics of converting lignocellulosic materials involve high processing costs attributed with pretreatment of the biomass and the use of enzymes for saccharification. Corn stover was obtained for the examination of an upstream processing step to transform the material into a pumpable slurry for subsequent pretreatment and saccharification. Biomass liquefaction was carried out using the enzyme Depol 692L (Biocatalysts, Wales, UK) at 50°C with …