Chemical Engineering Commons^™

In Vitro Evaluation Of Novel Titania-Containing Borate Bioactive Glass Scaffolds, Romina Shafaghi, Omar Rodriguez, Anthony W. Wren, Loraine Chiu, Emil H. Schemitsch, Paul Zalzal, Stephen D. Waldman, Marcello Papini, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Titanium-containing borate bioactive glass scaffolds (0, 5, 15, and 20 mol %, identified as BRT0, BRT1, BRT3, and BRT4) with a microstructure similar to that of human trabecular bone were prepared and evaluated in vitro for potential bone loss applications in revision total knee arthroplasty (rTKA). Methyl thiazolyl tetrazolium (MTT) cell viability assays of scaffold ion release extracts revealed that BRT0 scaffolds (0 mol % titanium) inhibited cell proliferation and activity at day 14. At day 30, all scaffold extracts decreased cell proliferation and activity significantly. However, live/dead cell assay results demonstrated that degradation products from all the scaffolds had …

Lignin-Zein Composite: Synthesis, Three-Dimensional Printing, And Microbial Degradation, Jin Gyun Lee, Yusheng Guo, Jorge A. Belgodere, Ahmed Al Harraq, Aubry A. Hymel, Amber J. Pete, Kalliat T. Valsaraj, Michael G. Benton, Mary G. Miller, Jangwook P. Jung, Bhuvnesh Bharti

Chemical and Biochemical Engineering Faculty Research & Creative Works

Worldwide use and disposal of plastics have reached a dramatic saturation point, polluting lands, oceans, and air across the globe. Responding to such a challenge requires, among other environmental remediation measures, the manufacture of alternative sustainable plastics. Recent studies in the area have enabled the development of degradable plastics; however, the rate and conditions required for the degradation of such materials remains under scrutiny. Here, we introduce a new class of fully plant-based, rapidly degradable lignin and zein composite blend that can be transformed into macroscopic structures using extrusion three-dimensional (3D) printing. Corn-derived zein forms the polymeric solution, while insoluble …

Characterization And Oil Recovery Enhancement By A Polymeric Nanogel Combined With Surfactant For Sandstone Reservoirs, Mustafa Mohammed Almahfood, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The characterization and enhanced oil recovery mechanisms of a nanosized polymeric cross-linked gel are presented herein. A negatively charged nanogel was synthesized using a typical free radical suspension polymerization process by employing 2-acrylamido 2-methyl propane sulfonic acid monomer. The synthesized nanogel showed a narrow size distribution with one peak pointing to a predominant homogeneous droplet size. The charged nanogels were also able to adsorb at the oil-water interfaces to reduce interfacial tension and stabilize oil-in-water emulsions, which ultimately improved the recovered oil from hydrocarbon reservoirs. In addition, a fixed concentration of negatively charged surfactant (sodium dodecyl sulfate or SDS) was …

Bone Cement As A Local Chemotherapeutic Drug Delivery Carrier In Orthopedic Oncology: A Review, Sunjeev S. Phull, Alireza Rahimnejad Yazdi, Michelle Ghert, Mark R. Towler

Chemical and Biochemical Engineering Faculty Research & Creative Works

Metastatic bone lesions are common among patients with advanced cancers. While chemotherapy and radiotherapy may be prescribed immediately after diagnosis, the majority of severe metastatic bone lesions are treated by reconstructive surgery, which, in some cases, is followed by postoperative radiotherapy or chemotherapy. However, despite recent advancements in orthopedic surgery, patients undergoing reconstruction still have the risk of developing severe complications such as tumor recurrence and reconstruction failure. This has led to the introduction and evaluation of poly (methyl methacrylate) and inorganic bone cements as local carriers for chemotherapeutic drugs (usually, antineoplastic drugs (ANPDs)). The present work is a critical …

Mixed Matrix Membranes For Sustainable Electrical Energy-Saving Applications, Hossein Riasat Harami, Farid Amirkhani, Hossein Abedsoltan, Mohammad Younas, Mashallah Rezakazemi, Mahdi Sheikh, Saeed Shirazian

Chemical and Biochemical Engineering Faculty Research & Creative Works

This work presents a technical investigation and review of the development of mixed matrix membranes (MMMs) employed in different applications to save electrical energy. The MMMs design has been recently adjusted and improved to restore more energy bulks. The important factors to control the performance of the MMMs are the penetrant type, membrane matrix, and polymer-filler interface interactions. This study reviews the current methods to deal with dielectric MMMs and smart nanomembranes for energy saving. These methods include ferroelectric membrane fabrication, dielectric permittivity, conductive dopants, construction of nanocomposites with modified surfaces, and the usage of combined effects. Most chemists and …

Fluorination Of Al₂O₃ Coating For Lithium-Ion Battery, Xinhua Liang, Han Yu

Chemical and Biochemical Engineering Faculty Research & Creative Works

Improving the performance of cathodes by using surface coatings has proven to be an effective method for improving the stability of Li-ion batteries (LIBs), while a high quality film satisfying all requirements of electrochemical inertia, chemical stability, and lithium ion conductivity has not been found. A composite film composed of AI₂O₃ and AIF3 layers was coated on the surface of Li-rich NMC based electrodes by atomic layer deposition (ALD). The electrochemical characterization results indicated that the coating with 1 cycle of AIF3 ALD on 5 cycles of AI₂O₃ ALD (1 A1 F3-5AI₂O …

Coating Compositions And Methods For Using The Same, Fateme Rezaei, Thomas P. Schuman, Glenn Morrison

Chemical and Biochemical Engineering Faculty Research & Creative Works

Coating compositions and methods for using the same are disclosed. The coating compositions can include an aminosilica adsorbent. The coating compositions can adsorb CO₂.

Isolation And Purification Of Glycoglycerolipids To Induce Apoptosis In Breast Cancer Cells, Muhammad Raisul Abedin, Sutapa Barua

Chemical and Biochemical Engineering Faculty Research & Creative Works

Monogalactosyldiacylglycerol (MGDG) is the most abundant type of glycoglycerolipid found in the plant cell membrane and mostly in the chloroplast thylakoid membrane. The amphiphilic nature of MGDG is attractive in pharmaceutical fields for interaction with other biological molecules and hence exerting therapeutic anti-cancer, anti-viral, and anti-inflammatory activities. In this study, we investigated the therapeutic efficacy of cyanobacteria derived MGDG to inhibit breast cancer cell growth. MGDG was extracted from a cyanobacteria Synechocystis sp. PCC 6803 followed by a subsequent fractionation by column chromatographic technique. The purity and molecular structure of MGDG were analyzed by nuclear magnetic resonance (NMR) spectroscopy analysis. …

The 3-O-Sulfation Of Heparan Sulfate Modulates Protein Binding And Lyase Degradation, Pradeep Chopra, Apoorva Joshi, Jiandong Wu, Weigang Lu, Tejabhiram Yadavalli, Margreet A. Wolfert, Deepak Shukla, Joseph Zaia, Geert Jan Boons

Chemical and Biochemical Engineering Faculty Research & Creative Works

Humans Express Seven Heparan Sulfate (HS) 3-O-Sulfotransferases that Differ in Substrate Specificity and Tissue Expression. Although Genetic Studies Have Indicated that 3-O-Sulfated HS Modulates Many Biological Processes, Ligand Requirements for Proteins Engaging with HS Modified by 3-O-Sulfate (3-OS) Have Been Difficult to Determine. in Particular, the Context in Which the 3-OS Group Needs to Be Presented for Binding is Largely Unknown. We Describe Herein a Modular Synthetic Approach that Can Provide Structurally Diverse HS Oligosaccharides with and Without 3-OS. the Methodology Was Employed to Prepare 27 Hexasaccharides that Were Printed as a Glycan Microarray to Examine Ligand Requirements of a …

Catalytic Carbon Dioxide Hydrogenation To Methanol/Dimethyl Ether Over Copper-Based Catalysts, Xiao Fan

Doctoral Dissertations

Direct synthesis of dimethyl ether (DME) via CO₂ hydrogenation has received great attention, owing to the global warming caused by CO₂ emission and increasing energy demand worldwide. In this works, three major aspects of bifunctional catalysts development were studied: (1) investigation of the roles of interaction in the CuO-ZnO-ZrO₂-Al₂O₃/HZSM-5 bifunctional catalysts, (2) deactivation and regeneration of CuO-ZnO-ZrO₂-Al₂O₃ with different zeolitic catalysts for one-step CO₂ hydrogenation to dimethyl ether, and (3) study on the enhancement of activity and stability of CZZA/HZSM-5 bifunctional catalysts via the introduction of …

What Are The Dominant Flow Regimes During Carbon Dioxide Propagation In Shale Reservoirs’ Matrix, Natural Fractures And Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Carbon dioxide (CO₂) injection in low permeability shale reservoirs has recently gained much attention due to the claims that it has a large recovery factor and can also be used in CO₂ storage operations. This research investigates the different flow regimes that the CO₂ will exhibit during its propagation through the fractures, micropores, and the nanopores in unconventional shale reservoirs to accurately evaluate the mechanism by which CO₂ recovers oil from these reservoirs. One of the most widely used tools to distinguish between different flow regimes is the Knudsen Number. Initially, a mathematical analysis of …

Convective-Diffusive Transport In Krogh Cylinders: A Model For Pharmacokinetics, Xianjie Qiu

Doctoral Dissertations

"Drug delivery to inside of the tumor is the important problem. The dynamics of drug delivery is presented here. Previously and particularly for directed delivery, a stirred tank model has been used, which appears to have worked well when compared to experiments. However, the stirred tank models do not include all the mass transfer resistances and towards that end we have used a distributed system called Krogh cylinder. This study focuses on the Krogh cylinder model simulation, both on the fluid flow and the mass transfer. The capillary network is broken down into cylindrical cells, each containing a capillary and …

Studies On Protein Solubility, Ke Li

Doctoral Dissertations

"Solubility is a critical factor of protein-based drugs during processing and patient administration. This study focused on two aspects of solubility: one was the poly (ethylene) glycol (PEG) precipitation of monoclonal antibodies (mAbs) and another was crystallins aggregation that is associated with cataracts. Protein precipitation by PEG is a common technique for downstream processing. The effects of pH, ionic strength and the exclude volume effect on the protein precipitation by PEG were extensively studied, but the effects of glycosylation on protein precipitation by PEG has not been examined. Protein aggregation is not only a problem in downstream processing, but it …

Extracting Metallurgy Contaminants And Hydrocarbons Removing From Water And Industrial Wastewater Using Enhanced Emulsion Liquid Membrane With Nanoparticles And Ionic Liquid, Qusay Al-Obaidi

Doctoral Dissertations

It is an uphill battle to extract pollutants such as heavy metals, hydrocarbons, and radioactive metals from water and industrial wastewater. Emulsion liquid membrane (ELM) is an emerging technology that combines extraction/recover and stripping in one stage to extract/recover heavy metals and/or hydrocarbons from water and wastewater. ELM devised a way to clean up heavy metals and/or hydrocarbons from the water and wastewater where its primary chemicals can be recycled and reused.

In this work, the Emulsion Liquid Membrane (ELM) has been enhanced by adding nanoparticles and ionic liquid to significantly improve the recovery of the water-based contaminants of heavy …

Investigation Of Post-Acid Stimulation Impacts On Well Performance Using Fracture Modeling And Reservoir Simulation In A Jurassic Carbonate Reservoir, Muaath Alansari

Masters Theses

"Well stimulation (well fracturing) became an essential tool in the Oil and Gas industry to unlock the potential of unconventional reservoirs all over the world and especially in the Middle East. In Kuwait, well stimulation is obligatory when dealing with deep Jurassic carbonate reservoirs. Thus, the well fracture designing process plays a very critical role in determining the success of the stimulation job and the improvement of the recovery.

Several wells stimulated with 20% HCL have shown wide variations in both short and long term well production performance. The research aims to investigate and identify the possible reasons causing these …

Relationships Among Mineralogy, Geochemistry, And Oil And Gas Production In The Tuscaloosa Marine Shale, Hayley Roxana Beitel

Masters Theses

"The Tuscaloosa Marine Shale (TMS) is an unconventional shale reservoir located in southeast Louisiana and southwest Mississippi. Limited mineralogical and geochemical data for the TMS have been published. The data that do exist indicate that the formation is heterogeneous. Consequently, previous investigators and oil and gas companies have not managed to effectively link mineralogical and chemical changes to oil and gas production in the TMS. These linkages are critical to establish for future exploration efforts. In this study, we attempt to establish these relationships by gathering all existing mineralogical and chemical data in the TMS, including newly acquired data from …

Analysis Of Refracturing Activities In The Major Shale Plays In The United States, Faisal Shammam

Masters Theses

"Refracturing of existing horizontal multistage wells has increased over the past decade in the oil industry. This work aims to investigate all the refracturing operations in the most active shale plays in the united states (Bakken, Niobrara, Marcellus, Permian, Eagle Ford, Barnett, and Haynesville) in terms of completion technique, candidate selection, treatment types, and refracturing production efficiency. To collect the data of the refractured wells, an advanced data analytics approach was applied to separate the refractured wells from 170,000 wells reported in FracFocus, a public chemical registry for hydraulic fracturing in the United States, and combine it with DrillingInfo database, …

Enhancing Emulsion Liquid Membrane System (Elm) Stability And Performance For The Extraction Of Phenol From Wastewater Using Various Nanoparticles, Faris H. Al-Ani, Qusay F. Alsalhy, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Emulation liquid membrane (ELM) technology has recently garnered attention as an efficient alternative for separating pollutants, but it faces the problem of instability during the application, as well as emulsion breaking. With this in mind MgO, Al₂O₃, and three magnetic Fe₂O₃ nanoparticles (of different sizes) were utilized to fabricate a new Pickering ELM system (PELM). The extraction efficiency of phenol from aqueous solution by PELM was studied with different NPs types and with different phenol concentrations (1,000; 500; 100; and 50 ppm). It was found that the type of NPs and concentration of …

Water Absorption Enhancement Of Sodium Poly Acrylate And Poly(2-Acrylamido-2-Methylpropane Sulphonic Acid) Based Hydrogel Mixtures, Sohair A. Darwish, Ibrahim M. Ibrahim, Nasser Y. Mostafa, Mostafa A. Radwan, Mohamed A. Sadek, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Introduction: Hydrogels are hydrophilic polymers which are cross-linked to form three-dimensional structures, which can absorb, swell and retain huge amounts of water or aqueous fluids. Objective: This paper reports the preparation and characterization of Poly (2-Acrylamido-2-Methylpropane Sulphonic Acid) (PAMPS) hydrogel with different crosslinking intensities. Methodology: 2-Acrylamido-2-methylpropane sulfonic acid (AMPS) monomer was purchased from Alfa Aesar Company as reagent grade. It was used as received (>98% purity) without any further purification. PAMPS hydrogel was prepared by free radical crosslinking solution polymerization of AMPS in water at room temperature under a nitrogen blanket in cylindrical glass tubes. The characteristics of the …

Better Heat And Power Integration Of An Existing Gas-Oil Plant In Egypt Through Revamping The Design And Organic Rankine Cycle, Mamdouh A. Gadalla, Alaa Elmasry, Ibrahim Alhajri, Fatma H. Ashour, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Objective: The current study aims mainly to Maximize Condensate Recovery (NGLs), focusing on a gas processing train of Gas-Oil Separation Plant (GOSP) located in Egypt with a capacity of 4,230 kmole/h. Methods: The research study accounts for the constraint of Reid Vapor Pressure (RVP) specification, which makes the storage in floating roof tanks is of a great risk. The study proposes the installation of the cryogenic train that recovers condensates (C4+). This train comprises of compression unit, expansion unit, three-phase separators and a re-boiled absorber. The problem of RVP will no longer exist because of the re-boiled absorber achieving RVP …

Equilibrium And Kinetic Study On The Biosorption Of Trypan Blue From Aqueous Solutions Using Avocado Seed Powder, Tamer T. El-Idreesy, Omar Khoshala, Amin Firouzi, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

This research aims to investigate the removal of trypan blue dye from aqueous solutions by employing ground avocado seeds powder, a low-cost biowaste adsorbent (biosorbent), under various experimental conditions. The effect of contact time, initial dye concentration, and adsorbent dose on dye removal were studied. The experimental kinetic data were fitted to pseudo-first order and pseudo-second-order kinetic models. Results imply that adsorption of trypan blue on the avocado seed adsorbent nicely followed the pseudo-second-order kinetic model. Equilibrium isotherms were analyzed by Langmuir and Freundlich isotherms, where Langmuir isotherm described the isotherm data with a high-correlation coefficient (R2=0.9948) closer to unity, …

An Experimental Study Investigating The Impact Of Miscible And Immiscible Nitrogen Injection On Asphaltene Instability In Nano Shale Pore Structure, Mukhtar Elturki, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Miscible gas injection has become the most used enhanced oil recovery (EOR) method in the oil and gas industry. The deposition and precipitation of asphaltene during the gas injection process is one of the problems during the oil production process. The asphaltene can deposit and plug the pores, which reduces the permeability in a reservoir; thus, decreasing the oil recovery and increasing the production costs. This research investigates the nitrogen (N2) miscible and immiscible pressure injections on asphaltene instability in shale pore structures. First, a slim tube was used to determine the minimum miscibility pressure (MMP) of N2 to ensure …

Prediction Of Equivalent Liquid Permeability From Gas Permeability Measurements: A Recurrent Neural Network Approach, Husam Alkinani, Abo Taleb Al-Hameedi, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

One of the most vital reservoir properties is permeability. It is usually measured using core samples with two major measurement methods: using gas or using liquid. The purpose of this work is to use a data-driven recurrent neural network model to estimate the equivalent liquid permeability based on gas permeability. By using this model, the equivalent liquid permeability can be predicted for the permeability of core samples with rich clay minerals measured using gas (or any core sample that is measured using gas). This will give an alternative way to the currently used method (Klinkenberg method). Core sample data measurements …

Will Carbon Dioxide Injection In Shale Reservoirs Produce From The Shale Matrix, Natural Fractures, Or Hydraulic Fractures?, Sherif Fakher, Youssef Elgahawy, Hesham Abdelaal, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Enhanced oil recovery (EOR) in shale reservoirs has been recently shown to increase oil recovery significantly from this unconventional oil and gas source. One of the most studied EOR methods in shale reservoirs is gas injection, with a focus on carbon Dioxide (CO₂) mainly due to the ability to both enhance oil recovery and store the CO₂ in the formation. Even though several shale plays have reported an increase in oil recovery using CO₂ injection, in some cases this method failed severely. This research attempts to investigate the ability of the CO₂ to mobilize crude …

Power Generation From Waste Heat During Oil Production, Subrahmanya Chandra Bhamidipati

Masters Theses

"The increase in the world population is causing a significant increase in the global demand for energy. This rise in demand is generally met with the use of fossil fuels. But there is considerable pressure to lessen the release of carbon through the combustion of fossil fuels. One way that the oil and gas industry can provide increased energy without carbon combustion is by extracting the latent heat energy contained in produced oil, gas and water from producing reservoirs, and from water which is cycled through depleted, end-of-life or abandoned reservoirs. Extracting this energy and using it to provide direct …

Minimizing Lost Circulation Non-Productive Time Using Expected Monetary Value And Decision Tree Analysis, Husam Hasan Alkinani, Abo Taleb Tuama Al-Hameedi, Shari Dunn-Norman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lost circulation and problems related to drilling present a major challenge for the drilling industry. Each year, billions are spent to treat these problems. There is not a single solution to lost circulation because of the complexity and kind of formations susceptible to this issue. Lost circulation treatment data for the Shuaiba formation (induced fractured formation) were gathered from drilled wells in Southern Iraq (over 2000). Treatments have been grouped according to the volume of mud loss as complete, severe, and partial loss remedies. Detailed costs and probabilities calculations were conducted. The costs of three types of loss treatments (partial, …

Impact Of Rheology Models On Horizontal Well Polymer Flooding In A Heavy Oil Reservoir On Alaska North Slope: A Simulation Study, Jianqiao Leng, Mingzhen Wei, Baojun Bai, Randall S. Seright, Yin Zhang, David Cercone, Samson Ning

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Polymer rheology can have either a positive or a negative effect on polymer flooding performance under varied circumstances. Many researchers have studied the effect of polymer rheology in a vertical well, but no field scale studies have been conducted to investigate whether polymer rheology is beneficial to polymer flooding in heavy oil reservoirs developed by horizontal wells. In this paper, we conducted a numerical simulation study to examine the effect of HPAM polymer rheology on a polymer flooding pilot, which is the first-ever project conducted on a heavy oil reservoir from Alaska North Slope (ANS) developed by horizontal wells. Three …

First Ever Polymer Flood Field Pilot To Enhance The Recovery Of Heavy Oils On Alaska's North Slope Pushing Ahead One Year Later, Abhijit Dandekar, Baojun Bai, John Barnes, Dave Cercone, Jared Ciferno, Reid Edwards, Samson Ning, Walbert Schulpen, Randy Seright, Brent Sheets, Dongmei Wang, Yin Zhang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In June 2018 the team embarked on an ambitious project to address the slow development pace of Alaska's 20+ billion barrels heavy oil resource via the first ever polymer flood pilot. Following the successful commencement of the pilot in August 2018, the field demonstration, supporting laboratory experiments and numerical simulation have steadily progressed. A significant amount of valuable data and lessons learned have been collected and are reported in this paper. The ongoing pilot and the research activities is making headway toward the primary objective of validating the use of polymer flooding for extracting heavy oil in Alaska's challenging environment. …

Inorganic Biodegradable Substrates For Devices & Systems, Chang-Soo Kim, Richard K. Brow, Delbert E. Day

Patents

Disclosed are biodegradable glass substrates that are useful as functional elements of solid-state devices. In particular, biodegradable glass substrates having a rapidly degradable glass and a slowly degradable glass provide a structural platform that completely dissolves following a desired operational lifetime of devices such as implanted electronic devices, implanted sensor devices, and optical fibers.

Zeolite Monolith Compositions And Methods For The Catalytic Cracking Of Alkanes, Ali A. Rownaghi, Xin Li, Fateme Rezaei

Patents

Porous zeolite monolith compositions for the catalytic cracking of alkanes. The compositions may be prepared layer by layer using a 3D printer such that the compositions comprise a plurality of micropores and a plurality of mesopores and may be characterized by macro-meso-microporosity.