Chemical Engineering Commons^™

Risk As A Process: A History Informed Hazard Planning Approach Applied To The 2018 Post-Fire Debris Flows, Montecito, California, Anna Serra-Llobet, John Radke, G. Mathias Kondolf, Larry Gurrola, J. David Rogers, Sarah Lindbergh, Johnny Douvinet

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Historical information about floods is not commonly used in the US to inform land use planning decisions. Rather, the current approach to managing floods is based on static maps derived from computer simulations of the area inundated by floods of specified return intervals. These maps provide some information about flood hazard, but they do not reflect the underlying processes involved in creating a flood disaster, which typically include increased exposure due to building on flood-prone land, nor do they account for the greater hazard resulting from wildfire. We developed and applied an approach to analyze how exposure has evolved in …

Magnetic Inversion Approach For Modeling Data Acquired Across Faults: Various Environmental Cases Studies, Khalid S. Essa, Eid R. Abo-Ezz, Neil Lennart Anderson, Omar A. Gomaa, Mahmoud Elhussein

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An effective extension to the particle swarm optimizer scheme has been developed to visualize and modelize robustly magnetic data acquired across vertical or dipping faults. This method can be applied to magnetic data sets that support various investigations, including mining, fault hazards assessment, and hydrocarbon exploration. The inversion algorithm is established depending on the second horizontal derivative technique and the particle swarm optimizer algorithm and was utilized for multi-source models. Herein, the inversion method is applied to three synthetic models (a dipping fault model contaminated without and with different Gaussian noises levels, a dipping fault model affected by regional anomaly, …

Impact Of Hvfr Loading Concentrations On Its Viscoelastic Properties And Proppant Transport Performance, Ghith Biheri, Shari Dunn Norman, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

In unconventional reservoirs, increasing the low formation conductivities through hydraulic fracturing may substantially increase oil production from wells. This work of improving the fracture conductivity could be conducted by distributing and transporting proppant within the fracture lengths using high fracture fluid concentrations. This research focused on three areas. First, it assessed the fluid rheology including the viscosity and elasticity of a high viscosity friction reducer (HVFR) and linear guar using deionized (DI) water at different fluid concentrations (i.e., 2, 4, and 8 gpt for the HVFR and 15, 25, and 35 ppt for linear guar), and measured the impact of …

Comparative Study Of Proppant Transport In The Vertical Fracture For High Viscosity Friction Reducers And Slickwater Fracturing With High-Tds Marcellus Shale Formation Water, Xiaojing Ge, Abdulmohsin Imqam, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) have been gaining more attention and increasing in use as proppant carriers. Reusing of produced water has also been driven by both environmental and economic benefits. However, high total dissolved solids (TDS) of produced water and high reservoir temperature significantly decrease the viscoelastic properties of HVFRs even for the cationic ones, which further reduce their proppant transport capabilities. Increasing loadings of HVFRs also has very limited effects on improving their proppant transport performances under high-TDS and high-Temperature conditions. The ultimate objective of this experimental study is to investigate the injection rate effects on the proppant …

Study Of Legionella Pneumophila Treatment With Copper In Drinking Water By Single Cell-Icp-Ms, Lei Xu, Austin Sigler, Anna Chernatynskaya, Lindsey Rasmussen, Jingrang Lu, Endalkachew Sahle-Demessie, David J. Westenberg, Hu Yang, Honglan Shi

Biological Sciences Faculty Research & Creative Works

Legionella pneumophila is a persistent opportunistic pathogen that poses a significant threat to domestic water systems. Previous studies suggest that copper (Cu) is an effective antimicrobial in water systems. A rapid and sensitive quantification method is desired to optimize the conditions of L. pneumophila treatment by Cu and to better understand the interaction mechanisms between Cu and cells. In this study, we developed a highly sensitive single cell (SC)-ICP-MS method to monitor L. pneumophila cell concentration and track their uptake of Cu. The SC-ICP-MS method showed excellent sensitivity (with a cell concentration detection limit of 1000 cells/mL), accuracy (good agreement …

Influence Of Interfering Ions And Adsorption Temperature On Radioactive Iodine Removal Efficiency And Stability Of Ni-Mof-74 And Zr-Uio-66, Turki Alghamdi, Peter O. Aina, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Metal-organic frameworks (MOFs) often exhibit an exceptional adsorption-based separation performance for a variety of gases, ions, and liquids. While most radioactive iodine removal studies focus on the capture of radioactive iodine from off-gas streams, few studies have systematically investigated the effect of structure-property relationships of MOFs on iodine removal performance in the presence of interfering ions in liquid solutions. Herein, we investigated the iodide ion (I^-) adsorption performance of two model MOFs (e.g., Ni-MOF-74 and Zr-UiO-66) in liquid phase as a function of iodine concentration (e.g., 0.125 to 0.25 and 0.50 mmol/L) and adsorption temperature (e.g., 25 to …

A Comprehensive Review Of The Influence Of Heat Exchange Tubes On Hydrodynamic, Heat, And Mass Transfer In Bubble And Slurry Bubble Columns, Dalia S. Makki, Hasan Sh Majdi, Amer A. Abdulrahman, Abbas J. Sultan, Zahraa W. Hasan, Laith S. Sabri, Bashar J. Kadhim, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Bubble and slurry bubble column reactors (BCRs/SBCRs) are used for various chemical, biochemical, and petrochemical applications. They have several operational and maintenance advantages, including excellent heat and mass transfer rates, simplicity, and low operating and maintenance cost. Typically, a catalyst is present in addition to biochemical processes where microorganisms are used to produce industrially valuable bio-products. Since most applications involve complicated gas-liquid, gas-liquid-solid, and exothermic processes, the BCR/SBCR must be equipped with heat-exchanging tubes to dissipate heat and control the reactor's overall performance. In this review, past and very recent experimental and numerical investigations on such systems are critically discussed. …

Simulation And Optimization Of Waste Heat To Electricity Through Organic Rankine Cycles (Orcs): A Case Study In An Oil Refinery, Mohamed A. Sadek, Mamdouh A. Gadalla, Noran Shedid, Dina Ahmed, Hany A. Elazab

Chemical and Biochemical Engineering Faculty Research & Creative Works

Energy efficiency has become a global problem that is detrimental to the chemical industries technically, economically and to the environment. Organic Rankine Cycle (ORC) is a promising technology that can solve this problem by recovering heat from low-grade waste heat sources by using organic working fluids. The heat source for the ORC system used in this article is air leaving air coolers in an oil refinery with a temperature of 140o C. The heat exchanger data for this refinery was used in the simulation of a basic cycle and a regenerative cycle using ASPEN HYSYS V.10. These ORC systems were …

Demonstration Of High Detoxification Efficiency Of Glassy Polymer-Metal Hydroxide Composites Toward Chemical Warfare Agent Simulants, Peter O. Aina, Sukanta K. Mondal, Joshua Costain, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

The design and development of polymeric composites that can effectively capture and destruct toxic chemicals with a fast detoxification rate is of high importance for protecting the military, first responders, and civilians. Here we report the synthesis and assessment of zirconium hydroxide (Zr (OH)4)-incorporated Ultem, Matrimid, and PIM-1 composites for detoxification of dimethyl 4-nitrophenylphosphonate (DMNP), as a type G toxic nerve agent simulant. Maintaining homogeneity, three different loadings (8, 20, 30 wt %) of Zr (OH)4 were incorporated into the polymers, and the thin films of composite materials were developed for subsequent hydrolysis tests. Our results indicated that increasing the …

Hydrothermal Stability Of Na-Lta Shaped With Clay Binder, Jimmy D.L. Moreno, Daniele Da S. Pereira, Thalita M. Azevedo, Dárley C. De Melo, Debora A.S. Maia, Fateme Rezaei, Moisés Bastos-Neto, Diana C.S. De Azevedo

Chemical and Biochemical Engineering Faculty Research & Creative Works

Gas drying by adsorption on molecular sieves is one of the first unit operations in natural gas processing. Nevertheless, the thermal swings during regeneration combined with the presence of a complex gas mixture may lead to early adsorbent fouling. The shaping of adsorbent materials is crucial not only to reduce pressure drop in columns, but also for enhanced thermal and mechanical properties. In this work, synthesized sodium-based zeolite Linde Type A (Na-LTA) in powder was shaped by extrusion into cylindrical pellets using a clay binder followed by calcination at 673 K for 24 h. The produced 2-mm pellets had binder …

Effect Of Alkali Metal Functionalization On Hydrogen Storage Performance Of Highly Porous Activated Carbons, Ruthradharshini Murugavel, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

With increasing energy demand and fast-paced decarbonization methods adopted to curb the adverse effects of greenhouse gas emissions, hydrogen (H2) is considered a sustainable, clean, and potential renewable energy carrier for the future. To substitute the energy needs required for the physical methods of H2 storage, adsorbed gas storage (AGS) is the next viable option that provides the opportunity to adsorb and desorb gases under mild conditions. In this work, we studied the effect of light alkali metal functionalization comprising Li and K on the H2 storage performance of porous graphitic carbon adsorbents. The effect of metal doping on the …

Effect Of Eggshell Powder And Nano-Hydroxyapatite On The Surface Roughness And Microhardness Of Bleached Enamel, Shahinaz Hassan, Lamiaa Moharam

Chemical and Biochemical Engineering Faculty Research & Creative Works

Background: The aim of the study was to evaluate the remineralizing potential of prepared solutions of eggshell powder (ESP) and nano-hydroxyapatite (nHA) on the surface roughness and microhardness of bleached enamel. Materials and Methods: Fifty bovine anterior teeth were selected and cleaned then bleached using a chemically activated in-office bleaching agent then the teeth were randomly allocated into five groups (n = 10) according to the tested remineralizing agents (10% ESP solution, 10% nHA solution, and MI Paste Plus) into; control, bleached, bleached + ESP solution, bleached + nHA solution, and bleached + MI Paste Plus groups. Then, the teeth …

Assessment Of The Dimensionless Groups-Based Scale-Up Of Gas–Solid Fluidized Beds, Faraj M. Zaid, Haider Al-Rubaye, Thaar M. Aljuwaya, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

The most common scale-up approach for gas–solids fluidized beds is based on matching the governing dimensionless parameters. In the literature, this approach has been validated only by means of measuring global parameters between different sizes of fluidized beds. However, such global measurements are not sufficient to depict all the interplaying hydrodynamic phenomena and hence verify the scale-up relationships. Therefore, to assess this approach, an advanced gas–solids optical probe and pressure transducer measurement techniques have been applied to quantify local hydrodynamic parameters in two different sized fluidized beds. Four different sets of experimental conditions were designed and conducted to examine the …

Review Of The Fluid Dynamics And Heat Transport Phenomena In Packed Pebble Bed Nuclear Reactors, Rahman S. Almusafir, Ahmed A. Jasim, Muthanna H. Al-Dahhan

Chemical and Biochemical Engineering Faculty Research & Creative Works

Knowledge and proper safety analyses of the gas coolant and heat transport mechanism in the dynamic core of packed pebble bed nuclear reactors pose challenges to the reliable design and efficient operation of these reactors. Therefore, this paper carefully reviews most of the gas coolant mixing and heat transport studies performed for the fluid flow and heat transfer processes in packed pebble bed reactors (PBRs). It begins with a brief introduction and description of nuclear PBRs. The second section summarizes the physical characteristics of packed bed reactors in terms of the bed structure (porosity) and its radial and axial distributions. …

Development And Assessment Of Magnetic Fe2o3@Mof-74 Composite Sorbents For Ethylene/Ethane Separation, Khaled Baamran, Kyle Newport, Ali A. Rownaghi, Fateme Rezaei

Chemical and Biochemical Engineering Faculty Research & Creative Works

Development of smart sorbents that can be regenerated when triggered by external stimuli such as magnetic field can overcome the poor energy utilization of the current sorbents investigated for light olefins/paraffins separation. In this work, we report the development of novel magnetic sorbents comprising of MOF-74 crystals and superparamagnetic Fe₂O₃ particles in a core–shell structure, and assessment of their C₂H₄/C₂H₆ separation performance. The electromagnetic properties of the materials were tuned by varying the Fe₂O₃ (Fe_x) loading (x = 1–20 wt%), and their effects on adsorption …

Techno-Economic And Life Cycle Analyses For A Supercritical Biodiesel Production Process From Waste Cooking Oil For A Plant Located In The Midwest United States, Prashant Nagapurkar, Joseph D. Smith

Chemical and Biochemical Engineering Faculty Research & Creative Works

Existing Literature Lacks Detailed Techno-Economic and Environmental Life Cycle Analyses (TEA-LCA) Focused on Supercritical Biodiesel Production Pathways Produced Via Waste Products. Therefore, in This Work, the TEA-LCA Was Conducted to Generate Supercritical Biodiesel from Waste Cooking Oil for Plants Located in the Midwest Region of USA Having Annual Production Capacities of 10,600 and 128,000 T using Aspen Plus and GREET Software. Two Plant Production Capacities Were Chosen to Capture the Economies of Scale Impact on Biodiesel Manufacture Cost. in the Supercritical Process, Methanol and Propane Were Used as a Cosolvent to Synthesize Biodiesel from Waste Cooking Oil (WCO) at 280 …

Data Analytics Of Wettability Alteration With Surfactants In Carbonate Reservoirs, Ya Yao

Doctoral Dissertations

"Wettability alteration with surfactants has been widely applied to improve oil recovery in carbonate reservoirs. An effective surfactant huff-puff application design requires comprehensive guidelines about where, how, and when this method could be applied. Besides, traditional methods to design an effective application and optimize surfactant performance are dependent on extensive experiments and are time-consuming. This study is to assist in the design of surfactant huff-puff via statistical methods and machine learning techniques.

In this study, a dataset including 402 effective surfactant imbibition tests is established by collecting information from nearly 50 publications. The dataset provides a foundation for further data …

Analyzing Spatio-Temporal Mechanisms Of Land Subsidence In The Parowan Valley, Utah, Usa, Jiawei Li, Ryan G. Smith, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Parowan Valley, Utah (USA), is an agricultural region experiencing rapid subsidence due to extensive groundwater extraction from aquifers with a significant portion of fine-grained sediments. To analyze the subsidence spatio-temporally, time-series Interferometric Synthetic Aperture Radar (InSAR) of 155 Sentinel-1 C-band scenes were processed. These data showed approximately 30 cm of ground subsidence in Parowan Valley from 2014 to 2020. Because of the high temporal sampling rate of the Sentinel-1 satellite (12-day cycle), it is possible to determine the seasonal changes of ground deformation and relate this to groundwater extraction. To better understand the relationship between ground deformation and groundwater extraction …

Microcrystalline Dolomite In A Middle Permian Volcanic Lake: Insights On Primary Dolomite Formation In A Non-Evaporitic Environment, Xin Jiao, Yi Qun Liu, Wan Yang, Hong Li, Zi Yuan Meng, Min Ru Zhao, Zhe Xuan Li

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Lacustrine dolomite nucleation commonly occurs in modern and Neogene evaporitic alkaline lakes. As a result, ancient lacustrine microcrystalline dolomite has been conventionally interpreted to be formed in evaporitic environments. This study, however, suggests a non-evaporitic origin of dolomite precipitated in a volcanic–hydrothermal lake, where hydrothermal and volcanic processes interacted. The dolomite occurs in lacustrine fine-grained sedimentary rocks in the middle Permian Lucaogou Formation in the Santanghu intracontinental rift basin, north-west China. Dolostones are composed mainly of nano-sized to micron-sized dolomite with a euhedral to subhedral shape and a low degree of cation ordering, and are interlaminated and intercalated with tuffaceous …

Finite Line Relief Well System Design For Dams And Levees, Andrew M. Keffer, Erich D. Guy, Katherine R. Grote

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

An Analytical Method is Commonly Used to Design Relief Well Systems by Assuming the Well Line Extends an Infinite Distance Parallel to the Dam or Levee. This Assumption May Be Met in Some Cases, But When a Well Line is of Finite Length, This Can Severely Underestimate Excess Heads. Although These Consequences Have Been Historically Recognized, a Practical Graph-Based Analytical Approach for Finite Well Line Design Has Not Been Developed. Finite Well Lines Exist and Continue to Be Installed at Many Locations, So This Study Developed a Practical Design Method for Such Systems. Analytical Solutions and Numerical Models Were Used …

Electrical Resistivity Tomography Revealing Possible Breaching Mechanism Of A Late Pleistocene Long-Lasted Gigantic Rockslide Dam In Diexi, China, Lanxin Dai, Xuanmei Fan, Dan Wang, Fanyu Zhang, Ali P. Yunus, Srikrishnan Siva Subramanian, J. David Rogers, Hans Balder Havenith

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Landslide damming is a widespread phenomenon worldwide and significantly affects the evolution of fluvial landscapes. However, it is rarely witnessed from an antiquities perspective, and the case for observing their internal structure is challenging. We attempt to visualize the subsurface structure and understand the likely breaching mechanism of the late Pleistocene Diexi gigantic landslide dam (longevity of ~ 10 ka), using electrical resistivity tomography (ERT) method. Eight ERT measurements on the Diexi dam body revealed high resistivity zones near the periphery and lower resistivity zones in the middle portion of the profiles. Geomorphological mapping based on the LiDAR data determined …

The Taphonomic Character, Occurrence, And Persistence Of Upper Permian–Lower Triassic Plant Assemblages In The Mid-Paleolatitudes, Bogda Mountains, Western China, Robert A. Gastaldo, Mingli Wan, Wan Yang

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The Bogda Mountains, Xianjiang Uygur Autonomous Region, Western China, Expose an Uppermost Permian–Lower Triassic Succession of Fully Continental Strata Deposited Across Three Graben (Half Graben) Structures in the Mid-Paleolatitudes of Pangea. a Cyclostratigraphy Scheme Developed for the Succession is Subdivided into Three Low-Order Cycles (Wutonggou, Jiucaiyuan, Shaofanggou). Low-Order Cycles Are Partitioned into 1838 High-Order Cycles based on Repetitive Environmental Changes, and their Plant Taphonomic Character is Assessed in . 4700 M of High-Resolution, Measured Sections Distributed Across ~ 100 Km. Four Taphonomic Assemblages Are Represented By: Permineralized Wood (Both Autochthonous and Allochthonous), Megafloral Adpressions (?parautochthonous and Allochthonous) Identifiable to Systematic …

Drainage And Sedimentary Response Of The Northern Andes And The Pebas System To Miocene Strike-Slip Tectonics: A Source To Sink Study Of The Magdalena Basin, S. Zapata, L. Calderon-Diaz, C. Jaramillo, Francisca Oboh-Ikuenobe, J. C. Piedrahita, M. Rodríguez-Cuevas, A. Cardona, E. R. Sobel, M. Parra, V. Valencia, A. Patiño, J. S. Jaramillo-Rios, M. Flores, J. Glodny

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Miocene strike-slip tectonics was responsible for creating and closing short-lived (ca. 6 Ma) passages and the emergence of isolated topography in the Northern Andes. These geological events likely influenced the migration and/or isolation of biological populations. To better understand the paleogeography of the Miocene hinterland and foreland regions in the Northern Andes, we conducted a source-to-sink approach in the Magdalena Basin. This basin is located between the Central and Eastern Cordilleras of Colombia and contains an ample Miocene record, which includes Lower Miocene fine-grained strata and Middle Miocene to Pliocene coarsening-up strata. Our study presents a new data set that …

Sedimentological And Geochemical Characterization Of A Varved Sediment Record From The Northern Neotropics, Edward Duarte, Jonathan Obrist-Farner, Susan R.H. Zimmerman, Erik T. Brown, Robert Brown

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Annually resolved sedimentological records (including annual varves) can be used to develop precise chronologies for key climatic and tectonic events. Varved records, however, are most common in high latitude lakes, resulting in a spatial bias with respect to annually resolved records in tropical regions. Here we report on the sedimentology of two sediment cores from Lake Izabal, eastern Guatemala, that contain a well-preserved thinly laminated section spanning ca. 2200 years of the mid-Holocene. We integrate radiocarbon age-depth modeling, sedimentological observations, laminae counting, µX-ray fluorescence scanning, and multivariate statistical analyses to constrain the nature and chronology of the laminations. Our sedimentological …

Impact Of Composition And Salinity On Swelling And Gel Strength Of Poly (Acrylamide-Co-Acrylic Acid) Preformed Particle Gel, Ahmed Ben Ali, Reem Elaf, Mohammed Saad, Ibnelwaleed A. Hussein, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The effects of various material compositions and reservoir environments on the ultimate strength and swelling kinetics of a commercial preformed particle gel (PPG) have been investigated. This study used different ratios of acrylamide and acrylic acid copolymers with a specific crosslinker concentration. Results have indicated that increasing the acrylic acid proportion enhances the PPGs' ability to swell but weakens their network structure. In contrast, increasing the crosslinker content decreases the swelling ratio and increases the gel strength. The highest equilibrium swelling capacity among the six preformed particle gel samples was obtained for PPG2, which has the highest acrylic acid amount …

Prediction Of Single Proppant Terminal Settling Velocity In High Viscosity Friction Reducers By Using Artificial Neural Networks And Xgboost, Xiaojing Ge, Rong Lu, Ghith Biheri, Abdulmohsin Imqam, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

High viscosity friction reducers (HVFRs) have been recently gaining more attention and increasing in use, not only as friction-reducing agents but also as proppant carriers. The settling velocity of the proppant is one of the key outputs to describe their proppant transport capability. However, it is influenced by many factors such as fluid properties, proppant properties, and fracture properties. Many empirical/physics-based models and correlations to predict particle settling velocity have been developed. However, they are usually based on certain assumptions and have applicable limits. In contrast, machine learning models can be considered as a black box. The objective of this …

Transport And Plugging Performance Evaluation Of A Novel Re-Crosslinkable Microgel Used For Conformance Control In Mature Oilfields With Super-Permeable Channels, Adel Alotibi, T. Song, Baojun Bai, Thomas P. Schuman

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Preformed particle gels (PPG) have been widely applied in oilfields to control excessive water production. However, PPG has limited success in treating opening features because the particles can be flushed readily during post-water flooding. We have developed a novel micro-sized Re-crosslinkable PPG (micro-RPPG) to solve the problem. The microgel can re-crosslink to form a bulk gel, avoiding being washed out easily. This paper evaluates the novel microgels' transport and plugging performance through super-permeable channels. Micro-RPPG was synthesized and evaluated for this study. Its storage moduli after fully swelling are approximately 82 Pa. The microgel characterization, self-healing process, transportation behavior, and …

Laboratory Investigation Of Regained Rock Permeability Using High Viscosity Friction Reducer In Comparison To Linear Guar Fracture Fluids, Ghith Biheri, Abdulmohsin Imqam

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Hydraulic fracturing is a method employed for extracting oil and gas from unconventional reservoirs by pumping a mixture of water, sand, and additives into the reservoirs to fracture oil formations. A high viscosity friction reducer (HVFR) based on polyacrylamide is a popular chemical that has been employed recently during hydraulic fracturing treatments to help transport proppant and to reduce friction. However, the use of HVFRs at high concentrations, especially in regions with high concentration levels of total dissolved solids (TDS), has raised concerns over the possibility of formation damage. In this research, a new type of HVFR was investigated for …

The Influence Of Tropical Atlantic Sea-Surface Temperatures And The North Atlantic Subtropical High During The Maya Droughts, Derek K. Gibson, Jonathan Obrist-Farner, Brooke A. Birkett, Jason H. Curtis, Melissa A. Berke, Peter M.J. Douglas, Prudence M. Rice, Jeremy Maurer

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

The frequency and duration of Late-Holocene hydrologic extremes in northern Guatemala were investigated using multiple sedimentological and geochemical proxies preserved in a sediment core collected from Lake Petén Itzá. A general trend of increasing aridity in the Maya Lowlands during the past 2000 years was punctuated by several multidecadal- to centennial-scale drought events recorded in the Petén Itzá sediments. In particular, the period spanning the Maya Terminal Classic Period and the Medieval Climate Anomaly (MCA), between 800 and 1300 CE, was marked by several extreme droughts and included the driest conditions of the past 2000 years between 950 and 1100 …

Insights To Surfactant Huff-Puff Design In Carbonate Reservoirs Based On Machine Learning Modeling, Ya Yao, Yue Qiu, Yue Cui, Mingzhen Wei, Baojun Bai

Geosciences and Geological and Petroleum Engineering Faculty Research & Creative Works

Surfactants could react with adsorbates on carbonate rock surface to alter wettability from oil-wetness to water-wetness, which is effective to enhance oil recovery. Surfactant huff-puff treatment is mostly applied for this purpose and the resulting surfactant performance is the outcome of complex interfacial processes. Currently, the effect of important parameters on surfactant performance is not completely reported and the contribution of each parameter to surfactant performance is hard to be quantified. Traditional methods to optimize surfactant performance are time-consuming and show strong dependency on extensive experiments. in this paper, we address these problems from machine learning (ML) perspectives. Several ML …