Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Petroleum Engineering (21)
- Civil and Environmental Engineering (13)
- Physical Sciences and Mathematics (9)
- Geotechnical Engineering (3)
- Chemistry (2)
-
- Engineering Science and Materials (2)
- Environmental Sciences (2)
- Mining Engineering (2)
- Astrophysics and Astronomy (1)
- Catalysis and Reaction Engineering (1)
- Computer Sciences (1)
- Electrical and Computer Engineering (1)
- Electrical and Electronics (1)
- Instrumentation (1)
- Medical Specialties (1)
- Medicine and Health Sciences (1)
- Nanoscience and Nanotechnology (1)
- Natural Resources and Conservation (1)
- Other Astrophysics and Astronomy (1)
- Other Chemical Engineering (1)
- Other Computer Sciences (1)
- Other Engineering Science and Materials (1)
- Radiology (1)
- Thermodynamics (1)
- Keyword
-
- [RSTDPub] (26)
- Wettability (16)
- Additive manufacturing (11)
- Adsorption (11)
- Enhanced oil recovery (8)
-
- Microplastics (8)
- Microstructure (7)
- EOR (6)
- Fouling (6)
- Hydrogen storage (6)
- Interfacial tension (6)
- Machine learning (6)
- Metal organic frameworks (6)
- Water treatment (6)
- Hydrogen geo-storage (5)
- Mechanical properties (5)
- Underground hydrogen storage (5)
- Wastewater treatment (5)
- 3D printing (4)
- Artificial intelligence (4)
- Biomass (4)
- Coal (4)
- Contact angle (4)
- Direct lithium extraction (4)
- Hydrogen (4)
- Laser powder bed fusion (4)
- Mechanical property (4)
- Metal-organic frameworks (4)
- Methylene blue (4)
- Nanoparticles (4)
- Publication Year
- Publication
- Publication Type
Articles 91 - 120 of 289
Full-Text Articles in Chemical Engineering
Advancement Of Biocarbon Materials In Sustainable Thermal And Electrochemical Energy Storage With Future Outlooks, Md Shahriar Mohtasim, Barun K. Das
Advancement Of Biocarbon Materials In Sustainable Thermal And Electrochemical Energy Storage With Future Outlooks, Md Shahriar Mohtasim, Barun K. Das
Research outputs 2022 to 2026
Biocarbon exhibits significant potential in thermal and electrochemical energy storage owing to its higher surface area, flexible porosity, and superior thermal stability, facilitating effective energy absorption, storage, and conversion. Additionally, its sustainable and cost-effective nature, derived from renewable biomass, aligns with the growing demand for eco-friendly solutions. There is not enough review work that offers comprehensive details on the unique properties of biocarbon (both animal and plant-derived), synthesis and characterization methods, the root level mechanism of biocarbon's interaction with phase change materials (PCMs) matrix, the generalization of thermal and electrochemical regulation with an emphasis on the benefits to the environment …
Impact Of Biodegradation On The Mechanical And Fatigue Properties Of 3d-Printed Pla Bone Scaffolds, Hamed Bakhtiari, Alireza Nouri, Muhammad Aamir, Mohadeseh Najafi, Majid Tolouei-Rad
Impact Of Biodegradation On The Mechanical And Fatigue Properties Of 3d-Printed Pla Bone Scaffolds, Hamed Bakhtiari, Alireza Nouri, Muhammad Aamir, Mohadeseh Najafi, Majid Tolouei-Rad
Research outputs 2022 to 2026
A proper degradation rate of bone scaffolds ensures optimal mechanical support and effective tissue regeneration. The present study examines the degradation effects of simulated body fluids (SBF) on the compressive and fatigue strength of 3D-printed PLA bone scaffolds. Scaffolds with varying surface-to-volume (S/V) ratios and identical porosity (60 %) were immersed in Hanks' solution for a maximum period of 30 days. Static and dynamic compression tests were performed at different immersion times to assess how S/V ratio influences the degradation process. CT images showed that scaffold pore structure remained interconnected after biodegradation, with no significant change in strut thickness or …
Influence Of Zinc Oxide Nanoparticles On The Efficiency Of Oxytetracycline Removal From Wastewater Using Continuous Catalytic Ozonation, Sarmad Al-Anssari, Hassanain A. Hassan, Maha K. Mohsin, Ahmed A. Mohammed
Influence Of Zinc Oxide Nanoparticles On The Efficiency Of Oxytetracycline Removal From Wastewater Using Continuous Catalytic Ozonation, Sarmad Al-Anssari, Hassanain A. Hassan, Maha K. Mohsin, Ahmed A. Mohammed
Research outputs 2022 to 2026
Antibiotics must be fully eliminated before they are released into the environment. In most cases, conventional wastewater treatment systems are not built to handle polar microcontaminants such as antibiotics. Oxytetracycline (OTC) is one of these antibiotics, an environmental hazard contaminant in aqueous solutions. Therefore, an advanced treatment method is needed for wastewater contaminated with antibiotics. In this study, we employed zinc oxide nanoparticles (ZnO), and the catalytic ozonation procedure was employed to increase the ozonation efficiency. A continuous experiment was carried out to compare the effectiveness of catalytic and single ozonation in degrading OTC in a continuous reactor. The flow …
H2-Rich Biogas Production From Fixed Bed Wheat Straw Pyrolysis And The Potential Of Produced Biochar As H2 Storage Material, Tawanda Matamba, Hussein Rasool Abid, Alireza Keshavarz, Stefan Iglauer
H2-Rich Biogas Production From Fixed Bed Wheat Straw Pyrolysis And The Potential Of Produced Biochar As H2 Storage Material, Tawanda Matamba, Hussein Rasool Abid, Alireza Keshavarz, Stefan Iglauer
Research outputs 2022 to 2026
H2 is a clean energy source, and is targeted as one of the ways to transition from fossil fuels. However, there are drawbacks in production and storage of hydrogen. To cover the supply, we need H2 from many resources and because of its low density we need materials that can store bulky quantities of H2. Here we investigated the potential of a renewable source (waste wheat straw) to produce and store H2 through pyrolysis and adsorption. The impact of pressure and temperature (500–900 °C, and 1.01–30 bar range) on the selectivity of H2 rich gas production was systematically investigated; and …
A Study On The Multifunctional Properties And Application Perspectives Of Zno/Sic Composite Materials, Mohammad Nur-E-Alam
A Study On The Multifunctional Properties And Application Perspectives Of Zno/Sic Composite Materials, Mohammad Nur-E-Alam
Research outputs 2022 to 2026
ZnO/SiC nanocomposite materials possess significant potential for various technological fields due to their extraordinary optical, electrical, thermal, and mechanical properties. The synthesis methods, material properties, and diverse applications of ZnO/SiC composites have been systematically explored in this study. The potential application areas of this nanocomposite include their roles in photocatalysis, optoelectronic devices, gas sensors, and photovoltaic systems. The synergetic effects of ZnO and SiC are analyzed to highlight their advantages over their individual components. Future research directions must focus on the remaining challenges to optimize these nanoscale composite materials for industrial and emerging applications.
Distinctive Transpassivation Behavior And Characteristics Of Passive Films Of Laser Powder Bed Fusion Produced And Annealed Ti–6al–4v In Hank's Solution, Yi Fan Zhang, Liang Yu Chen, Ze Xin Wang, Hong Yu Yang, Maksym Bobrov, Dobuvyy Oleksandr, Yong Liu, Lai Chang Zhang
Distinctive Transpassivation Behavior And Characteristics Of Passive Films Of Laser Powder Bed Fusion Produced And Annealed Ti–6al–4v In Hank's Solution, Yi Fan Zhang, Liang Yu Chen, Ze Xin Wang, Hong Yu Yang, Maksym Bobrov, Dobuvyy Oleksandr, Yong Liu, Lai Chang Zhang
Research outputs 2022 to 2026
Passivated Ti alloys typically demonstrate enhanced corrosion resistance due to the formation of passive films. Intriguingly, in comparison to the annealed Ti–6Al–4V, laser powder bed fusion (LPBF) produced Ti–6Al–4V exhibits significantly attenuated transpassivation behavior in Hank's solution. This work investigated the electrochemical responses of both samples before and after the transpassivation region to illustrate the underlying mechanism for the phenomenon. In the passivation region, both samples displayed analogous passivation behavior, with the annealed and LPBF-produced Ti–6Al–4V having the current densities of 6.64 × 10−6 and 8.14 × 10−6 A cm−2 at 1 V, respectively. Between 1.5 V …
Performance Of Interrupted Minichannel Heat Sink Using Various Coolant Fluids, Ernie Mat Tokit, Mohd Zamri Yusoff, Hussein A. Mohammed
Performance Of Interrupted Minichannel Heat Sink Using Various Coolant Fluids, Ernie Mat Tokit, Mohd Zamri Yusoff, Hussein A. Mohammed
Research outputs 2022 to 2026
The advancement in the micro electro mechanical system, MEMS, had been utilized for several years before. This embarked on the compact and high density of power generation for tiny devices. This led to the development of a heat dissipating system for high-power-density devices. Hence, the work intends to simulate the fluid flow performance of interrupted minichannel heat sinks due to the redeveloping and interrupting of the boundary layer merging in previous work that augments the heat dissipation. The study is conducted through numerical work of laminar steady flow, by governing the Navier-Stokes and energy equation. Three interrupted minichannel heat sinks …
Eco-Friendly Additives For Biodegradable Polyesters: Recent Progress In Performance Optimization And Environmental Impact Reduction, Ahmad Fayyazbakhsh, Nima Hajinajaf, Hamed Bakhtiari, Michael Feuchter, Ilaria Improta, Ehsan Salehi, Sara Kamal Shahsavar, Marketa Julinova, Amirehsan Ghasemi, Bita Ghasemi, Reza Afsharnia, Marek Koutný, Young Cheol Chang
Eco-Friendly Additives For Biodegradable Polyesters: Recent Progress In Performance Optimization And Environmental Impact Reduction, Ahmad Fayyazbakhsh, Nima Hajinajaf, Hamed Bakhtiari, Michael Feuchter, Ilaria Improta, Ehsan Salehi, Sara Kamal Shahsavar, Marketa Julinova, Amirehsan Ghasemi, Bita Ghasemi, Reza Afsharnia, Marek Koutný, Young Cheol Chang
Research outputs 2022 to 2026
Biodegradable polymers have emerged as principal alternatives to petroleum-based polymers, which exert a detrimental impact on the environment. Among these, biodegradable polyesters stand out as particularly noteworthy, renowned for their exceptional properties that find application across diverse industries, including food packaging, biomedical devices, and agriculture. This comprehensive analysis delves into the impact of various additives, with a focus on eco-friendly ones, on biodegradable polyesters, as evidenced by recent research endeavors. The additives are systematically categorized to provide a nuanced understanding within distinct industrial contexts. In the exploration of these additives, a meticulous classification is employed, ensuring a focused analysis of …
Enhanced Removal Of Microplastic Fibres Using Aluminium And Chitosan-Based Coagulants Assisted With Microbubble Technology, Nimesha Thathsarani, Mehdi Khiadani, Muhammad Rizwan Azhar, Masoumeh Zargar
Enhanced Removal Of Microplastic Fibres Using Aluminium And Chitosan-Based Coagulants Assisted With Microbubble Technology, Nimesha Thathsarani, Mehdi Khiadani, Muhammad Rizwan Azhar, Masoumeh Zargar
Research outputs 2022 to 2026
Microplastic (MP) pollution has emerged as a threat to drinking water quality, where fibres are the dominant type of MPs found in drinking/wastewater treatment plant influents. The potential of MP removal through conventional treatment has not been vastly studied. Accordingly, this study investigates the removal of MP fibres using two-hybrid methods: coagulation-flocculation followed by sedimentation (CFS); and coagulation-flocculation combined with flotation using microbubbles (CFm) in the presence of two different water matrices, deionised water (DI) containing surfactants and DI water in the presence of humic acid (HA). A typically used Aluminium-based coagulant (AlCl3.6H2O) and a green-based coagulant, Chitosan, were employed …
Analysis Of Pistachio Shell-Derived Activated Porous Carbon Materials For Hydrogen Adsorption, Setareh Elyasi, Nishar Hameed, Peter J. Mahon, Saulius Juodkazis, Alireza Keshavarz, Stefan Iglauer, Tawanda Matamba, J. Vongsvivut, Nisa V. Salim
Analysis Of Pistachio Shell-Derived Activated Porous Carbon Materials For Hydrogen Adsorption, Setareh Elyasi, Nishar Hameed, Peter J. Mahon, Saulius Juodkazis, Alireza Keshavarz, Stefan Iglauer, Tawanda Matamba, J. Vongsvivut, Nisa V. Salim
Research outputs 2022 to 2026
Developing efficient storage materials is critical for advancing the hydrogen economy. In this study, we aim to utilize plant-based biomass as a sustainable source for fabricating porous carbon (PC) and subsequently employing it for hydrogen adsorption. For the first time, we synthesize highly porous carbon materials from pistachio shells as precursor materials for efficient hydrogen storage. Experiments were conducted to chemically activate pistachio shells using two different agents, sodium chloride (NaCl) and potassium chloride (KCl), at varying ratios. This study evaluates the effectiveness of these chemical activation agents in enhancing the surface area of PC and, consequently, its hydrogen adsorption …
Microplastics-Resistant Fo Membranes: Zwitterionic Mof Nanoparticles For Superior Fouling Control, Mitra Golgoli, Mohadeseh Najafi, Javad Farahbakhsh, Mehdi Khiadani, Michael L. Johns, Masoumeh Zargar
Microplastics-Resistant Fo Membranes: Zwitterionic Mof Nanoparticles For Superior Fouling Control, Mitra Golgoli, Mohadeseh Najafi, Javad Farahbakhsh, Mehdi Khiadani, Michael L. Johns, Masoumeh Zargar
Research outputs 2022 to 2026
The increasing contamination of water by microplastics (MPs) underscores the need for efficient tertiary treatments such as forward osmosis (FO). Developing advanced, low-fouling membranes is essential for enhancing FO system effectiveness. This work studies an innovative modification of FO membranes by the incorporation of a synthesized hybrid nanoparticle comprising metal-organic frameworks (MOFs) and sulfobetaine zwitterions into the thin layer of thin-film composite (TFC) membranes. The ZW/MOF (UiO-66-NH2), nanoparticles were synthesized using a post-synthetic free-radical copolymerization method, resulting in a uniform polymer shell around the MOF nanoparticles. The incorporation of ZW/MOF nanoparticles into the membranes enhanced the hydrophilicity of the membranes …
Hybrid Renewable Multi-Generation System Optimization: Attaining Sustainable Development Goals, Md Shahriar Mohtasim, Barun K. Das, Utpol K. Paul, Md Golam Kibria, Md Sanowar Hossain
Hybrid Renewable Multi-Generation System Optimization: Attaining Sustainable Development Goals, Md Shahriar Mohtasim, Barun K. Das, Utpol K. Paul, Md Golam Kibria, Md Sanowar Hossain
Research outputs 2022 to 2026
The optimization of hybrid renewable multi-generation systems is crucial for enhancing energy efficiency, reducing costs, and ensuring sustainable power generation. These factors can be significantly affected by system designs, optimization methods, climate changes, and varying energy demands. The optimization of a stand-alone hybrid renewable energy system (HRES) that integrates various combinations of electricity, heating, cooling, hydrogen, and freshwater needs has not been reported in a single comprehensive study. Additionally, there has been insufficient attention given to the impact of temporal resolution, the recovery of excess energy usage, and aligning these efforts with the sustainable development goals (SDGs). This study reviews …
Photo-Thermal Conversion Properties Of Mxene/Metal-Organic-Frameworks-Based Nanofluids For Solar Energy Harvesting, Seyedeh Zahra Haeri, Ali Dashan, Samira Sadeghi, Mitral Golgoli, Mehdi Khiadani, Bahram Ramezanzadeh, Masoumeh Zargar
Photo-Thermal Conversion Properties Of Mxene/Metal-Organic-Frameworks-Based Nanofluids For Solar Energy Harvesting, Seyedeh Zahra Haeri, Ali Dashan, Samira Sadeghi, Mitral Golgoli, Mehdi Khiadani, Bahram Ramezanzadeh, Masoumeh Zargar
Research outputs 2022 to 2026
This study focuses on enhancing solar energy capture efficiency by introducing innovative hybrid nanofluids for use in solar thermal collectors, whose performance largely depends on the absorption properties of the working fluid. The newly developed hybrid nanofluids, MXene/NH2-UiO66 (Zr) (noted as MX/UO66) and MXene/MIL-88B (Fe) (noted as MX/ML88), were synthesized using an in-situ solvothermal method, combining annealed Ti3C2Tx MXenes with water-stable metal–organic frameworks (MOFs). These nanofluids achieved high efficiency at low concentrations, providing both economic and performance benefits. Comprehensive testing compared the photothermal properties of these hybrids with single-component UO66 and ML88 nanofluids. The MX structures significantly expanded the absorption …
Performance Comparison Of Flat Sheet And Hollow Fibre Air Gap Membrane Distillation: A Mathematical And Simulation Modelling Approach, Hamed Kariman, Hussein A. Mohammed, Masoumeh Zargar, Mehdi Khiadani
Performance Comparison Of Flat Sheet And Hollow Fibre Air Gap Membrane Distillation: A Mathematical And Simulation Modelling Approach, Hamed Kariman, Hussein A. Mohammed, Masoumeh Zargar, Mehdi Khiadani
Research outputs 2022 to 2026
Membrane Distillation (MD) systems could address current challenges related to global water demand. Among MD systems, Air Gap Membrane Distillation (AGMD) systems play crucial roles in addressing this challenge. AGMD systems can be categorized into two main structural groups: flat sheet and hollow fibre forms. It is important to study, analyse, model and compare these two systems under the same operational conditions. In this study, a detailed mathematical model of flat sheet and hollow fibre AGMD modules under the same conditions (i.e., membrane type, membrane area, porosity, and pore radius of membrane) has been introduced. The simulation of system performance …
Sorption-Based Lithium Extraction From Diverse Brines Using Aluminium-Based Adsorbent, Mohsen Farrokhrouz, Mahdi Madelatparvar, Yasaman Boroumand, Amin Sarmadi, Mehdi Khiadani, Amir Razmjou
Sorption-Based Lithium Extraction From Diverse Brines Using Aluminium-Based Adsorbent, Mohsen Farrokhrouz, Mahdi Madelatparvar, Yasaman Boroumand, Amin Sarmadi, Mehdi Khiadani, Amir Razmjou
Research outputs 2022 to 2026
As demand and pressures to produce more lithium increases in the world in a more cost effective and environmentally sustainable, the existing proven methods such as aluminate-based adsorption should be adapted and combined with naturally heated brines to reduce cost, complexity and carbon footprint of production. In this study, an improved type of aluminate-based adsorbent was utilized to adsorb Li content of different brine sources, to show the relationship between the performance of the adsorbent and other factors in the brine. Different brine samples were synthesised from various geographical locations around the world to check the adsorption capacity of the …
Evaluating Coal-Jatropha Curcas Composite Briquettes As Sustainable Fuel Alternatives, Amad Ullah Khan, Muhammad Saleem, Muhammad Abas, Zakir Ullah, Khan Muhammad, Farida Anjum, Aamer Sharif, Melkamu Tadesse Getachew
Evaluating Coal-Jatropha Curcas Composite Briquettes As Sustainable Fuel Alternatives, Amad Ullah Khan, Muhammad Saleem, Muhammad Abas, Zakir Ullah, Khan Muhammad, Farida Anjum, Aamer Sharif, Melkamu Tadesse Getachew
Research outputs 2022 to 2026
Coal is a major fuel source but raises environmental concerns. This study investigated the feasibility of utilizing a composite briquette sustainable fuel produced from subbituminous coal and Jatropha curcas biomass. Briquettes were prepared with varying weight ratios of coal to J. curcas biomass (90:0–0:90) using corn starch as a binder. The influence of this ratio on the briquettes’ properties was comprehensively evaluated through proximate analysis, ultimate analysis, scanning electron microscopy (SEM), and X-ray fluorescence (XRF) analysis. The results revealed that increasing the J. curcas content in the briquettes gradually decreased the moisture content, ash content, and fixed carbon content while …
In-Situ Microstructural Evolution And Deformation Mechanisms Of Metastable Beta Titanium Fabricated By Laser Powder Bed Fusion Under Flexural Stress, H. Y. Ma, J. C. Wang, Y. J. Liu, Y. H. Li, Y. S. Zhang, X. C. Liu, L. C. Zhang
In-Situ Microstructural Evolution And Deformation Mechanisms Of Metastable Beta Titanium Fabricated By Laser Powder Bed Fusion Under Flexural Stress, H. Y. Ma, J. C. Wang, Y. J. Liu, Y. H. Li, Y. S. Zhang, X. C. Liu, L. C. Zhang
Research outputs 2022 to 2026
Compared to other loading conditions, studies on deformation mechanisms of additive manufacturing (AM)-produced β-type Ti alloys under bending remain limited. This study investigates a metastable β-type Ti–25Nb–3Zr–3Mo–2Sn (TLM, wt.%) alloy fabricated via laser powder bed fusion (L-PBF) during in-situ three-point bending. In-situ observations using scanning electron microscopy (SEM) combined with electron backscatter diffraction (EBSD) and ex-situ transmission electron microscopy (TEM) imaging during bending provided evaluation of microstructural changes and deformation mechanisms. These mechanisms are characterized by dislocation slip, {332}<113>β deformation twin, α" phase, and ω phase formation during plastic bending stage. The {112}<111> slip system dominates in the compression …
Evaluating Flue Gas Geo-Sequestration And Eor In Fractured Reservoirs Through Simulated Synergistic Reservoir Characteristics And Injection Kinetics, Mehdi Nassabeh, Zhenjiang You, Alireza Keshavarz, Stefan Iglauer
Evaluating Flue Gas Geo-Sequestration And Eor In Fractured Reservoirs Through Simulated Synergistic Reservoir Characteristics And Injection Kinetics, Mehdi Nassabeh, Zhenjiang You, Alireza Keshavarz, Stefan Iglauer
Research outputs 2022 to 2026
The global reliance on hydrocarbon resources and fossil fuels has resulted in a significant surge in carbon dioxide emissions, necessitating urgent measures to mitigate greenhouse gas emissions. Integrating CO2 storage with enhanced oil recovery (EOR) presents a promising solution for reducing emissions and enhancing oil recovery by sequestering CO2 within oil reservoirs, especially in fractured carbonate reservoirs. The research utilized the Eclipse simulator to model different gas injection scenarios in a crude oil reservoir, focusing on assessing the effectiveness of CO2 and flue gas geo-sequestration and EOR, performing sensitivity analyses on reservoir characteristics, and evaluating the impact of varying injection …
An Innovative Nh2-Uio-66/Nh2-Mil-125 Mof-On-Mof Structure To Improve The Performance And Antifouling Properties Of Ultrafiltration Membranes, Javad Farahbakhsh, Mitra Golgoli, Mohadeseh Najafi, Seyedeh Zahra Haeri, Mehdi Khiadani, Amir Razmjou, Masoumeh Zargar
An Innovative Nh2-Uio-66/Nh2-Mil-125 Mof-On-Mof Structure To Improve The Performance And Antifouling Properties Of Ultrafiltration Membranes, Javad Farahbakhsh, Mitra Golgoli, Mohadeseh Najafi, Seyedeh Zahra Haeri, Mehdi Khiadani, Amir Razmjou, Masoumeh Zargar
Research outputs 2022 to 2026
The careful design of distinctive membrane layers with specific pore structures is a crucial aspect of membrane fabrication. Previous efforts in metal–organic framework (MOF) based membranes have predominantly employed a single MOF material for improving membrane resistance to fouling due to microplastics and proteins. Here, a novel, highly specialised ultrafiltration (UF) membrane is developed through the in-situ growth of NH2-UiO-66 on the NH2-MIL-125 (MOF-on-MOF) crystals to improve membranes’ performance such as pure water flux (PWF), rejection, and antifouling properties. The developed membranes displayed multidimensional pores, leading to a significant enhancement in fouling resistance while achieving remarkable improvements in water flux. …
Enhancing Energy Efficiency In Solar Thermal Systems: The Role Of Hybrid Nanofluids In Sustainable Energy Harvesting And Storage, Seyedehzahra Haeri
Enhancing Energy Efficiency In Solar Thermal Systems: The Role Of Hybrid Nanofluids In Sustainable Energy Harvesting And Storage, Seyedehzahra Haeri
Theses: Doctorates and Masters
Global energy demand continues to grow, making the reliance on fossil fuels increasingly unsustainable due to dwindling reserves and environmental impacts. Among these, solar thermal systems have emerged as a practical and environmentally friendly solution, with applications ranging from industrial heating and solar water heating to concentrated solar power (CSP) plants and solar desalination units. Solar-based thermal systems offer a promising alternative, with nanofluids (NFs) emerging as a transformative solution. Engineered by dispersing nanoparticles into base fluids, NFs enhance thermal conductivity, heat absorption, and efficiency. Notably, nanoparticles such as titanium nitride also act as nano-catalysts, improving chemical reactions and reducing …
Zirconium-Based Amphoteric Metal–Organic Framework Membrane For Blue Energy Harvesting, Rockson Kwesi Tonnah, Milton Chai, Mohammad Khedri, Milad Razbin, Yasaman Boroumand, Reza Maleki, Huan Xiao, Amir Razmjou, Mohsen Asadnia
Zirconium-Based Amphoteric Metal–Organic Framework Membrane For Blue Energy Harvesting, Rockson Kwesi Tonnah, Milton Chai, Mohammad Khedri, Milad Razbin, Yasaman Boroumand, Reza Maleki, Huan Xiao, Amir Razmjou, Mohsen Asadnia
Research outputs 2022 to 2026
Salination of solutions of salinity gradient releases large-scale clean and renewable energy, which can be directly and efficiently transformed into electrical energy using ion-selective nanofluidic channel membranes. However, conventional ion-selective membranes are typically either cation- or anion-selective. A pH-switchable system capable of dual cation and anion transport along with salt gradient energy harvesting properties has not been demonstrated in ion-selective membranes. Here, we constructed an amphoteric heterolayer metal–organic framework (MOF) membrane with subnanochannels modified with carboxylic and amino functional groups. The amphoteric MOF-composite membrane, AAO/aUiO-66-(COOH)2/UiO-66-NH2, exhibits pH-tuneable ion conduction and achieves osmotic energy conversion of 7.4 and 5.7 W/m2 …
Smart And Sustainable Regeneration Of Fouled Desalination Membranes Using Artificial Intelligence, Muhammad Mubashir, Mustakeem Mustakeem, Ammar Alnumani, Abdulrahman Abutaleb, Ali Hamoud Naji Sumayli, Tausif Ahmad, Muhammad Rizwan Azhar
Smart And Sustainable Regeneration Of Fouled Desalination Membranes Using Artificial Intelligence, Muhammad Mubashir, Mustakeem Mustakeem, Ammar Alnumani, Abdulrahman Abutaleb, Ali Hamoud Naji Sumayli, Tausif Ahmad, Muhammad Rizwan Azhar
Research outputs 2022 to 2026
During the desalination process, scaling, fouling, and degradation are associated issues that lead to a drop in the separation performance of membranes. Membrane regeneration emerges as a critical technology in which upcycling and downcycling can offer a promising avenue for promoting sustainable membrane lifecycle management. Multiple research papers and reviews have critically analyzed the regeneration of membranes, which explains the end-of-cycle assessment and cost analysis of membrane recycling. However, challenges associated with the conventional and innovative regeneration processes are not yet analyzed. The potential impact of artificial intelligence (AI) on membrane regeneration is not explained in the literature. This review …
Development And Characterization Of Sustainable Coal–Biomass Briquettes Of Sub-Bituminous Coal And Levistona Chinensis Biomass, Amad Ullah Khan, Borhen Louhichi, Muhammad Abas, Muhammad Saleem, Nashmi H. Alrasheedi, Farida Anjum, Aamer Sharif
Development And Characterization Of Sustainable Coal–Biomass Briquettes Of Sub-Bituminous Coal And Levistona Chinensis Biomass, Amad Ullah Khan, Borhen Louhichi, Muhammad Abas, Muhammad Saleem, Nashmi H. Alrasheedi, Farida Anjum, Aamer Sharif
Research outputs 2022 to 2026
The increasing demand for sustainable energy solutions has driven the exploration of alternative fuels, such as coal–biomass briquettes, which combine the benefits of both coal and renewable biomass sources. This study focuses on the development and characterization of sustainable coal–biomass briquettes made from sub-bituminous coal (SubC) and Levistona chinensis seed biomass, with the aim of reducing environmental impact and enhancing combustion properties. Briquettes were produced by varying the coal-to-biomass ratios (90:0–0:90), with 10% corn starch used as a binder. Proximate analysis revealed that increasing biomass content raised moisture (5.85%–14.25%) and volatile matter (VM; 24.75%–32.5%), while reducing ash (15.75%–3.39%) and fixed …
The Strengthening Mechanisms And Incipient Plasticity Of Additively Manufactured Biomedical Refractory High Entropy Alloys, Changxi Liu, Liqiang Wang, Miao Luo, Kuaishe Wang, Marco De Battista, Ling Zhang, Weijie Lu, Lai Chang Zhang, Di Zhang
The Strengthening Mechanisms And Incipient Plasticity Of Additively Manufactured Biomedical Refractory High Entropy Alloys, Changxi Liu, Liqiang Wang, Miao Luo, Kuaishe Wang, Marco De Battista, Ling Zhang, Weijie Lu, Lai Chang Zhang, Di Zhang
Research outputs 2022 to 2026
Owing to the cellular structure that limits dislocation motion upon stress loading, additively manufactured (AM) refractory high-entropy alloys (HEAs) exhibit an excellent strength-plasticity synergy. This work integrates micro/nano-mechanical experiments with statistical physics modeling to examine dislocation nucleation and slip in AM-fabricated TiNbTaZrMo HEA. Computational results indicated that the activation volume for initial dislocation nucleation is about one atomic volume, facilitating dislocation initiation. Nanoindentation and in-situ micro-pillar compression reveal no significant pop-in events, indicating that the cellular structure impedes dislocation slip and thus prevents plasticity reduction from dislocation slipping near grain boundaries. This work provides a thorough investigation into the interplay …
3d Engineered Scaffolds Of Conjugated Polymers/Metal Organic Frameworks For Biomedical Applications, Amin Hosseini Sharifabad, Roham Ghanbari, Mohammad Reza Saeb, Ehsan Nazarzadeh Zare, Filippo Rossi, Mehdi Salami-Kalajahi, Pooyan Makvandi
3d Engineered Scaffolds Of Conjugated Polymers/Metal Organic Frameworks For Biomedical Applications, Amin Hosseini Sharifabad, Roham Ghanbari, Mohammad Reza Saeb, Ehsan Nazarzadeh Zare, Filippo Rossi, Mehdi Salami-Kalajahi, Pooyan Makvandi
Research outputs 2022 to 2026
The extracellular matrix can be replicated by 3D scaffolds, providing a favorable environment for cell growth, proliferation, and differentiation. Despite their biocompatibility, biodegradability, and bioactivity, the poor mechanical strength of 3D scaffolds limits their use for heavy loads. This creates a bottleneck in the supply of scaffolds with enhanced mechanical strength and all the previously mentioned characteristics. Conjugated polymers have emerged as a promising option for 3D scaffold construction due to their electrical conductivity, adjustable surface qualities, and ability to transfer bioactive molecules. Moreover, metal-organic frameworks (MOFs) are a rapidly emerging class of nanomaterials due to their uniform porosity, excellent …
Fatigue Properties Of 3d-Printed Polymeric Metamaterials: A Review, Ani Daniel, Hamed Bakhtiari, Alireza Nouri, Barun K. Das, Muhammad Aamir, Majid Tolouei-Rad
Fatigue Properties Of 3d-Printed Polymeric Metamaterials: A Review, Ani Daniel, Hamed Bakhtiari, Alireza Nouri, Barun K. Das, Muhammad Aamir, Majid Tolouei-Rad
Research outputs 2022 to 2026
The present article provides an in-depth review of the fatigue properties of polymeric metamaterials, with particular emphasis on those manufactured using 3D printing techniques. Despite the significant potential of 3D-printed metamaterial polymers in the biomedical field, there has been limited studies dedicated to their fatigue behaviour. The article highlights the significance of fatigue behaviour in determining the reliability and longevity of polymeric materials under cyclic loading, which is crucial for biomedical applications. The effects of different 3D printing parameters, metamaterial designs, and polymer properties on fatigue life are explored. The fatigue response of metamaterials depends on material properties, geometric factors, …
Challenges And Perspectives On Photocatalytic Membrane Reactors For Volatile Organic Compounds Degradation And Nitrogen Oxides Treatment, Muhammad Hassnain, Muhammad Rizwan Azhar, Asad Ali, Muhammad Mubashir, Abdulrahman Abutaleb
Challenges And Perspectives On Photocatalytic Membrane Reactors For Volatile Organic Compounds Degradation And Nitrogen Oxides Treatment, Muhammad Hassnain, Muhammad Rizwan Azhar, Asad Ali, Muhammad Mubashir, Abdulrahman Abutaleb
Research outputs 2022 to 2026
Air pollution is a pressing environmental and public health issue, with volatile organic compounds (VOCs) and nitrogen oxides (NOx) being among the most hazardous airborne pollutants. Photocatalytic membrane reactors (PMRs) have emerged as a promising technology for air purification due to their ability to integrate photocatalytic degradation and membrane separation in a single system. This paper provides a comprehensive review of the advancements, challenges, and future prospects of PMR technology for VOC degradation and NOx treatment. Various photocatalytic membranes and their fabrication techniques, including material selection, structural modifications, and catalyst immobilization strategies, are critically analyzed. The study further explores different …
Excellent Strength-Ductility Synergy Property Of Wire-Arc Additively Manufactured Mg-Gd-Y-Zr Alloy Investigated By Heat Treatment, Jiamin Li, Meng Huang, Juan Hou, Xingbin Wang, Gaopeng Xu, Yi Yang, Ning Mo, Yun Shi, Laichang Zhang, Weineng Tang
Excellent Strength-Ductility Synergy Property Of Wire-Arc Additively Manufactured Mg-Gd-Y-Zr Alloy Investigated By Heat Treatment, Jiamin Li, Meng Huang, Juan Hou, Xingbin Wang, Gaopeng Xu, Yi Yang, Ning Mo, Yun Shi, Laichang Zhang, Weineng Tang
Research outputs 2022 to 2026
In this work, the GW63K (Mg-6.54Gd-3.93Y-0.41Zr, wt.%) alloy wire was utilized as the feedstock material and the thin-walled component was fabricated using wire-arc additive manufacturing technology (WAAM). The microstructural evolution during deposition and subsequent heat treatment was explained through multi-scale microstructural characterization techniques, and the impact of heat treatment on the strength-ductility synergy of the deposited alloy was systematically compared. The results showed that the microstructure of the deposited sample was mainly composed of fine equiaxed α-Mg grains and Mg24(Gd,Y)5 phase. The optimized solution heat treatment (450 °C × 2 h) had little effect on the grain size, but can …
3d Printing Parameter Optimisation Combined With Heat Treatment For Achieving High Density And Enhanced Performance In Refractory High-Entropy Alloys, Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang, Lai Chang Zhang, Kuaishe Wang, Wen Wang, Lechun Xie, Liqiang Wang, Weijie Lu, Di Zhang
3d Printing Parameter Optimisation Combined With Heat Treatment For Achieving High Density And Enhanced Performance In Refractory High-Entropy Alloys, Deyu Jiang, Miao Luo, Changxi Liu, Yashuo Zhang, Lai Chang Zhang, Kuaishe Wang, Wen Wang, Lechun Xie, Liqiang Wang, Weijie Lu, Di Zhang
Research outputs 2022 to 2026
In this study, a Ti1.5Nb1Ta0.5Zr1Mo0.5 (TNTZM) high-entropy alloy was fabricated using laser powder bed fusion (LPBF). By integrating 63 sets of parameter trials with machine learning (ML) models, an optimised process window was identified, achieving a density of up to 99.9%. The combination of relatively high laser power and low scanning speed resulted in the formation of a stable cellular structure. Subsequent heat treatments at 700, 850, and 1000°C showed that while small-angle misorientations developed at cell-wall interfaces and medium-entropy (Ti–Zr–Mo) second-phase particles precipitated preferentially in the cell walls, the overall cellular architecture remained intact. Mechanical testing showed that these …
Photo-Thermal Conversion Properties Of Hybrid Nh2-Mil-125/Tin/Eg Nanofluids For Solar Energy Harvesting, Seyedeh Zahra Haeri, Mehdi Khiadani, Bahram Ramezanzadeh, Hamed Kariman, Masoumeh Zargar
Photo-Thermal Conversion Properties Of Hybrid Nh2-Mil-125/Tin/Eg Nanofluids For Solar Energy Harvesting, Seyedeh Zahra Haeri, Mehdi Khiadani, Bahram Ramezanzadeh, Hamed Kariman, Masoumeh Zargar
Research outputs 2022 to 2026
Nanofluids, engineered by dispersing nanoparticles into base fluids, have demonstrated significant potential in enhancing the performance of solar collectors. Their superior thermal conductivity and improved heat transfer properties lead to more efficient energy absorption and utilization in solar thermal systems. This study comprehensively investigated and compared the performance of ethylene glycol (EG)-based NH2-MIL-125/TiN (MIL/TiN) composite nanofluids, fabricated by a two-step method, with single-component nanofluids in photothermal utilization. The results illustrated that incorporating NH2-MIL-125 (MIL) nanoparticles enhances the stability of TiN nanofluids in EG. Additionally, the thermal conductivity and optical absorption properties of the hybrid nanofluids exhibited a positive correlation with …