Chemical Engineering Commons^™

Enhanced Oil Recovery By Hydrophilic Silica Nanofluid: Experimental Evaluation Of The Impact Of Parameters And Mechanisms On Recovery Potential, Tariq A. Chandio, Muhammad A. Manan, Khalil R. Memon, Ghulam Abbas, Ghazanfer R. Abbasi

Research outputs 2014 to 2021

Nanofluids as an EOR technique are reported to enhance oil recoveries. Among all the nanomaterial silica with promising lab results, economic and environmental acceptability are an ideal material for future applications. Despite the potential to enhance recoveries, understanding the two-fold impact of parameters such as concentration, salinity, stability, injection rate, and irreproducibility of results has arisen ambiguities that have delayed field applications. This integrated study is conducted to ascertain two-fold impacts of concentration and salinity on recovery and stability and evaluates corresponding changes in the recovery mechanism with variance in the parameters. Initially, silica nanofluids’ recovery potential was evaluated by …

Hydrogen Adsorption On Sub-Bituminous Coal: Implications For Hydrogen Geo-Storage, Sefan Iglauer, Hussein Abid, Ahmed Z. Al-Yaseri, Alireza Keshavarz

Research outputs 2014 to 2021

Hydrogen is a clean fuel that can potentially revolutionize the energy supply chain and decarbonize fuel consumption. However, a key hurdle that needs to be overcome before a full-scale hydrogen economy can be established is hydrogen storage which is currently the main limitation. Here, we propose that hydrogen gas can be stored in underground coal seams, where it adsorbs on the coal surface. However, currently, no hard data related to such a procedure exists. We, therefore, demonstrate experimentally that significant amounts of hydrogen gas can be stored via this route. Hydrogen adsorption capacities reached 0.6 moles H₂/kg of …

Selective Adsorption Of Rare Earth Ions From Aqueous Solution On Metal-Organic Framework Hkust-1, Liang Zhao, Xiaoguang Duan, Muhammad R. A. Azhar, Hongqi Sun, Xiangchen Fang, Shaobin Wang

Research outputs 2014 to 2021

Recovery of rare earth ions from wastewater holds an important strategy for the use of the precious resources. In this study, we found that a metal-organic framework (MOF), HKUST-1, exhibited a high affinity and selectivity towards adsorptive recovery of rare earth ions (Ce3+ and La3+) in aqueous solutions. The adsorbent showed a remarkable adsorption capacity of 234 mg/g and 203 mg/g for Ce3+ and La3+ at pH = 6, respectively. More importantly, its adsorption selectivity of the rare earth ions was about 87% against other metal ions. The adsorption isotherm, kinetics, and mechanism in the process were also investigated. The …

Synergistic Effect Of Hydrophilic Nanoparticles And Anionic Surfactant On The Stability And Viscoelastic Properties Of Oil In Water (O/W) Emulations; Application For Enhanced Oil Recovery (Eor), Sarmad Al-Anssari, Zain-Ul-Abedin Arain, Haider A. Shanshool, Alireza Keshavarz, Mohammad Sarmadivaleh

Research outputs 2014 to 2021

With the rapidly increased global energy demand, great attention has been focused on utilizing nanotechnology and particularly nanofluids in enhanced oil recovery (EOR) to produce more oil from low-productivity oil reservoirs. Nanofluid flooding has introduced as one of the promising methods for enhanced oil recovery using environment-friendly nanoparticles (NPs) to be as an innovative-alternative for chemical methods of EOR. This work investigates the synergistic effects of anionic surfactant and hydrophilic silica nanoparticles on the stability and the mechanical behavior of oil in water (O/W) emulsions for their application in EOR. To achieve this, an extensive series of experiments were conducted …

Chemically Dealloyed Fe-Based Metallic Glass With Void Channels-Like Architecture For Highly Enhanced Peroxymonosulfate Activation In Catalysis, J.C. Wang, S.X. Liang, Z. Jia, W.C. Zhang, W.M. Wang, Y.J. Lui, J. Lu, L.C Zhang

Research outputs 2014 to 2021

Metallic glasses (MGs) with their intrinsic disordered atomic structure and widely controllable atomic components have recently emerged as fascinating functional materials in wastewater treatment. Compared to crystalline alloys, the less-noble atomic components in monolithic metallic glass are more efficient to be selectively dissolved during dealloying process. This work reported a facile chemical dealloying approach to fabricate a void channels-like structured MG with the elemental components of Fe73.5Si13.5B9Cu1Nb3 for methylene blue (MB) degradation. Results indicated that the dealloyed Fe73.5Si13.5B9Cu1Nb3 MGs with the void channels-like morphology presented a significant improvement of catalytic efficiency and reusability. The dye degradation reaction rate (kobs) of …

Degradation And Hydrate Phase Equilibria Measurement Methods Of Monoethylene Glycol, Khalid Alef, Stefan Iglauer, Ahmed Barifcani

Research outputs 2014 to 2021

Monoethylene glycol (MEG), a common chemical used for the inhibition of gas hydrate formation may undergo degradation in the regeneration/reclamation process. Limited research exists on the effect of degradation of MEG on hydrate formation, production facilities and equipment especially in the presence of other chemical additives. The proposed method allows for streamlining the process of preparing, degrading and analysis of MEG solutions for hydrate testing and degradation products.

•

Procedure to prepare accurate MEG solutions avoiding oxidative degradation of MEG (i.e., controlling oxygen ingress).

•

Two methods are suggested to mimic field-like degradation of MEG solutions (i.e., degradation by reclamation …

Influence Of Substrate Stage Temperature And Rotation Rate On The Magneto-Optical Quality Of Rf-Sputtered Bi2.1dy0.9fe3.9ga1.1o12 Garnet Thin Films, Mohammad E. Alam, Mikhail Vasiliev, Kamal Alameh

Research outputs 2014 to 2021

Highly bismuth-substituted iron garnet thin films are prepared on quartz substrates by using a radio frequency (RF) magnetron sputtering technique. We study the factors (process parameters associated with the RF magnetron sputter deposition technique) affecting the magneto-optical (MO) properties of ferrite garnet films of composition Bi2.1Dy0.9Fe3.9Ga1.1O12. All films show high MO response across the visible range of wavelengths after being annealed. In particular, the effects of substrate stage temperature and rotation rate on the various properties of films are studied. Experimental results reveal that the characteristics of garnet films of this type can be tuned and optimized for use in …

Spectrally-Selective Energy-Harvesting Solar Windows For Public Infrastructure Applications, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam

Research outputs 2014 to 2021

A study of photovoltaic solar window technologies is reported and it focuses on their structural features, functional materials, system development, and suitability for use in practical field applications including public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 Wp/m2 from clear and transparent large-area glass-based solar windows.

Ultrafast Consolidation Of Bulk Nanocrystalline Titanium Alloy Through Ultrasonic Vibration, Peng Chen, W. B. Liao, Lehua Liu, F Luo, Xiaoyu Wu, Peijie Li, C Yang, M Yan, Y. J. Liu, Laichang Zhang, Zhiyuan Liu

Research outputs 2014 to 2021

Nanocrystalline (NC) materials have fascinating physical and chemical properties, thereby they exhibit great prospects in academic and industrial fields. Highly efficient approaches for fabricating bulk NC materials have been pursued extensively over past decades. However, the instability of nanograin, which is sensitive to processing parameters (such as temperature and time), is always a challenging issue to be solved and remains to date. Herein, we report an ultrafast nanostructuring strategy, namely ultrasonic vibration consolidation (UVC). The strategy utilizes internal friction heat, generated from mutually rubbing between Ti-based metallic glass powders, to heat the glassy alloy rapidly through its supercooled liquid regime, …

Using Agricultural Wastes To Treat Lead-Contaminated Water In Western Australia, Hanie Hashtroudi

Theses: Doctorates and Masters

Aqueous solutions are becoming increasingly contaminated in all parts of the world (2015). Heavy metals are toxic contaminants that are mainly distributed in urban stormwater run-off and industrial wastewaters as a result of some mining operations, electronic assembly planting, battery manufacturing, and etching operations (Kadirvelu et al. 2001). Pb (II) is a heavy metal that causes significant damage in the human body. Drinking lead-contaminated water even at low concentrations may cause lifethreatening conditions such as cancer, kidney damage, brain damage, and liver problems (El-Said 2010). Therefore, it is necessary to remove lead from aqueous solutions.

Several conventional physical, chemical, and …

Excellent Performance Of Fe78si9b13 Metallic Glass For Activating Peroxymonosulfate In Degradation Of Naphthol Green B, Xue-Fen Li, Shun-Xing Liang, Xiao-Wang Xi, Zhe Jia, Shi-Kun Xie, He-Chun Lin, Jun-Ping Hu, Laichang Zhang

Research outputs 2014 to 2021

The functional application of metallic glasses in the catalytic field has widely attracted research attention due to its unique atomic structure compared to crystalline materials. It has been reported that metallic glasses can effectively activate H₂O₂ and persulfate, yet the activation of peroxymonosulfate by metallic glasses is not studied well. In this work, the metallic glass with atomic composition of Fe₇₈Si₉B₁₃ was applied for investigating the peroxymonosulfate (PMS) activation on degradation of naphthol green B (NGB) dye. The change of surface morphology indicated the important role of oxide films during the dye …

Corrosion Behaviour Of Selective Laser Melted Ti-Tib Biocomposite In Simulated Body Fluid, Yang Chen, Junxi Zhang, Nianwei Dai, Peng Qin, Hooyar Attar, Laichang Zhang

Research outputs 2014 to 2021

The corrosion behaviour of CP-Ti and Ti-TiB composite produced by selective laser melting (SLM) in the artificial simulated body fluid (Hank's solution) at body temperature was investigated systematically by using electrochemical measurements (potentiodynamic polarisation curves and electrochemical impedance spectroscopy), together with some detailed structural characterisations. The results demonstrate that SLM-produced Ti-TiB composite samples possess better corrosion resistance than SLM-produced CP-Ti samples in Hank's solution. Due to these tiny TiB and TiB₂ particles acting as the micro-cathode uniformly distributing in titanium matrix, anodic dissolution of titanium matrix in the corrosion process is prominently facilitated in early stages, followed by rapid …

X-Ray Protection, Surface Chemistry And Rheology Of Ball-Milled Submicron Gd2o3 Aqueous Suspension, Ly B. T. La, Yee-Kwong Leong, Christopher Leatherday, Pek I. Au, Kevin Hayward, Laichang Zhang

Research outputs 2014 to 2021

X-ray protective garments are typically comprised of lead-based materials, which are toxic to both people and the environment. Developing alternative lightweight radiation shielding materials is a priority for protecting people working with radiation. Gadolinium, with an electron configuration typical of radiation shielding elements, is proposed as a non-toxic replacement for lead. This study provides new insights into the potential for a gadolinium suspension for replacing lead and proposes an inexpensive and effective preparation method. Submicron gadolinium oxide (Gd₂O₃) was generated using a cost effective ball milling method involving addition of NaCl. Then, the dispersed-flocculated behaviour of …

A Novel Approach For The Preparation Of Nanosized Gd2o3 Structure: The Influence Of Surface Force On The Morphology Of Ball Milled Particles, Ly B. T. La, Yee-Kwong Leong, Harry P. Watts, Pek-Ing Watts, Kevin Hayward, Laichang Zhang

Research outputs 2014 to 2021

This work investigates the effect of inter-particle forces arising from adsorbed typical cationic and anionic surfactants on the morphology of ball milled gadolinium oxide (Gd₂O₃). The experimental outcomes are interpreted in terms of stabilization and interaction mechanisms of fine washed Gd₂O₃ particles (size diameter <1 μm) in aqueous medium under the variation of surface forces arising of adsorbed surfactant. After ball milling and washing, the point of zero charge or isoelectric point (IEP) of Gd₂O₃ particles suspension is at pH 11 where its maximum yield stress is observed. Because of hydrophobic interaction, the maximum yield stress increases by 30 times by adsorbed sodium dodecyl sulfate (SDS) and its IEP shifts slightly to a lower pH. By cetyl trimethyl ammonium bromide (CTAB), …

A New Insight Into High-Strength Ti62nb12.2fe13.6co6.4al5.8 Alloys With Bimodal Microstructure Fabricated By Semi-Solid Sintering, Lehua Liu, Chao Yang, L.M Kang, Shengguan Qu, Xiaoquiang Li, Weiwen Zhang, Weiping Chen, Yuanyuan Li, Peijie Li, Laichang Zhang

Research outputs 2014 to 2021

It is well known that semi-solid forming could only obtain coarse-grained microstructure in a few alloy systems with a low melting point, such as aluminum and magnesium alloys. This work presents that semi-solid forming could also produce novel bimodal microstructure composed of nanostructured matrix and micro-sized (CoFe)Ti₂ twins in a titanium alloy, Ti₆₂Nb₁₂.2Fe_13.6Co_6.4Al_5.8. The semi-solid sintering induced by eutectic transformation to form a bimodal microstructure in Ti₆₂Nb_12.2Fe_13.6Co_6.4Al_5.8 alloy is a fundamentally different approach from other known methods. The fabricated alloy …

Phase Transformation And Deformation Behavior Of Niti-Nb Eutectic Joined Niti Wires, Liqiang Wang, Cong Wang, Laichang Zhang, Liangyu Chen, Weijie Lu, Di Zhang

Research outputs 2014 to 2021

NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19′ martensite transformation are induced by plastic deformation. R phase transformation, which significantly contributes to superelasticity, preferentially occurs at the interfaces between NiTi and eutectic region. Round-shaped Nb-rich phase with rod-like and lamellar-type eutectics are observed in eutectic regions. These phases appear to affect the deformation behavior of the brazed NiTi-Nb region via five …

Floating Constructed Wetland For The Treatment Of Polluted River Water: A Pilot Scale Study On Seasonal Variation And Shock Load, Tanveer Saeed, Biprojit Paul, Rumana Afrin,, Abdullah Al-Muyeed, Guangzhi Sun

Research outputs 2014 to 2021

This paper reports the performance of a pilot scale floating constructed wetland (FCW), employed for the treatment of polluted water collected from Buriganga river in Bangladesh. The FCW system included a tank for accommodating collected water and a floating mat with media, to support the growth of two macrophyte species Phragmites australis and Canna indica. Mean mass removal rates of 0.66, 0.76, 0.08, 0.51, 2.49g/m2d were achieved for ammoniacal nitrogen (NH4-N), total inorganic nitrogen (TIN), phosphorus (P), biochemical oxygen demand (BOD), chemical oxygen demand (COD), respectively by the FCW. Nitrogen removal was via nitrification-denitrification processes, whereas filtration-sedimentation appeared to influence …

A Fast Approach For Preparation Of Adsorbent From Reed Black Liquor And Its Performance In Equilibrium And Kinetic Gas Separation, G. Yang, Yong Sun, C. Wen, J. Zhang

Research outputs 2014 to 2021

A new approach using reed pulping black liquor by hydrothermal reaction followed by fast carbonization at 350 °C in fluidized bed reactor for 5 minutes was proposed in this paper. The BET specific surface area generated at optimum conditions reached 390 m2 g–1. The CO2 selectivity over CH4 and N2 comparable to commercial activated carbons was obtained. The isosteric enthalpies of adsorption for CO2, CH4 and N2 on the resultant carbon sample prepared at optimum conditions show surface heterogeneity. The kinetic results indicate its potential for separation of carbon dioxide from carbon dioxide/methane mixture.

Investigation And Characterisation Of Growth Phases Of Polycrystalline Cadmium Sulfide Thin Films Produced By The Chemical Bath Deposition Method, Peter Duncan

Theses : Honours

This research project investigates the characterisation and morphology of the growth phases of polycrystalline CdS thin films that were created using the Chemical Bath Deposition (CBD) method. One batch of CdS thin films was created by the author (group B) whilst another batch (group A) was obtained from a previous research project. In both cases, the experiments were designed such that successive slides in a set represent successive phases in the growth of these CdS thin films. Therefor analysis of the near surface for all slides in a set gave an accurate representation of conditions on the surface at the …